What kind of certification is suitable for our product

We have a J2EE product which focus on supply chain. Now I would like it to run on netweaver and exchange data with SAP (e.g. material master, purchasing doc) so that it can be seen as extenstion of SAP.
What certification process is suitable in this case? Power by netweaver or Xapps cert?
I looked at power by netweaver but it's merely deploying application on SAP J2EE application server and exporting some iview.
For Xapps certification, it requires the combination of services from more than 1components whereas our application only need to communicate with SAP.
Please help tell us the way to go.
Thanks
Giang

Hi Giang,
Your application can still qualify for a Packaged Composite Application (PCA) (The name xApp is reserved for SAP applications and PCA is an equivalent for 3rd-party developed xApps). For example, if you use one or more SAP composition tools such as, Composite Application Framework, Guided Procedure or Visual Composer to develop your PCA.
I suggest that you apply for a PCA certification by using the <a href="http://www.sap.com/partners/howtopartner/application/">link</a> so that we can better help you.
Regards,
Mustafa.

Similar Messages

What kind if tables are suitable for partitioning?

What kind of tables are suitable for partitioning?
I have several tables in same schema. Each of them is bigger than 200MB. DML commands are executed continuously against these tables. After diagnosis, I know than the sequential read wait is the root cause. Should I partition each of them?
Edited by: jetq on Jul 16, 2009 8:04 PM

jetq wrote:
What kind of tables are suitable for partitioning?The question to answer your question is: What will be gained by partitioning and why? When you understand this, then you can decide if it is suitable for partitioning.
BTW sequential read wait has to do with index scans, not table scans. Table scan waits are reported as scattered reads, not sequential.
Regards,
Greg Rahn
http://structureddata.org

What kind of glass is used for the iPhone 6?

I want to get a case before we upgrade to the iPhone 6. Some of the cases we are looking at (Speck Mightyshell) do not come with screen protectors. I was wondering what kind of glass is used for the iPhone 6 and if a screen protector is even necessary?

The iPhone 6 currently uses Corning’s Gorilla Glass. There was some speculation that they would start using Sapphire glass but I guess they’re not ready yet. I have had my iPad 2 for years now and the glass is still perfectly fine. My new iPhone 6 uses a more developed version of the same glass. Will the glass break? Yes. Will the glass scratch? Yes, if you carry your phone in the same pocket as your car keys, the screen will scratch. It’s not impervious, just highly resistant.
I do have a real life controlled experiment going on in the family. My wife and one son have their iPhone 6s in a case WITH a screen protector. Myself and my other son carry our iPhone 6s around without ANY protection whatsoever, no case and no screen protector. So far they all still look perfectly fine. We’ll se how this experiment turns out.

What kind of cert is needed for Client to MP/DP communication.

Hi,
What kind of Certificate is needed for Client to DP/MP communication? I know what the documentation says about setting up a Client cert and setting up auto enroll however, we are not able to setup auto enroll in a couple domains so we are trying
to figure out how to get certs on these other machines.
Will any cert listed in the personal store of the Client and the MP/DP work?
How does Config Manager pick the cert it needs to use for this on the CLient side and MP side?
Thanks in advance.
Thanks Lance

We manually created a cert for a machine using the Config Manager Client template. THis was the same template used to create the config manager client cert that we installed on the site system.
So both the Config Manager server and Client have a cert created with this template (and therefore show the same template id).
The client and config manager server have root certificate in the trusted root store from the same CA.
in our ccmmessaging.log file on the client we get the following error.
Certificate [Thumbprint ksdjfskfjdsfksjfskdfjskdjfskjfskdjfklsjdfslkfjdslkf] issued to 'machinename' doesn't have private key or caller doesn't have access to private key.
in the certificates MMC it shows for the certificate with the above thumbprint..
you have a private key that corresponds to this certificate.
What are we missing?
Thanks Lance

Which kind of paper is suitable for printing best quality photo by hp officejet 4500 wireless?

Hi
I have a "hp officejet 4500 wireless" printer and want to print best quality photo from my digital camera. Which kind of paper is suitable for my job? Please kindly advice me.
Best regards,
Faezeh Dibaei

The link below will bring you to the HPshopping website for the Officejet 4500 supplies. Click on the "Paper" link at the top of the webpage and it should show you the supported paper types. I would personally asuggest the Advanced photo paper for photo pritning.
http://shopping2.hp.com/en_US/home-office/-/products/-/-/CB867A?TargetPage=productsupplies
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem

What kind of document i need for register iOS Developer Enterprise Program ?

What kind of document i need for register iOS Developer Enterprise Program ?

Wond,
I have full access(SAP_ALL) on BI. What kind of Authorization on R/3 system to extract the data?
Thanks,

What Kind of microcontroller is needed for alarm system with PIR sensors

Hi ! I'm student at Technical University Varna ,
Bulgaria . I'm interessted to create my own alarm system with Labview,
but I'm not sure what kind of controller i need and what kind of PIR
sensors. Thank You

Hi xellos,
I'm not sure what you need, but if my feelings is right, than what you want to do is sort of motion detector based on PIR sensor and some ucontroller. It this is what you need, than once again, such a question is rather suitable for other discussion forums, like LabVIEW Embedded.
However, in general you can go for ARM or Blackfin when thinking about embedded platform. See following links to get more ingormation on ARM and Blackfin with LabVIEW:
NI LabVIEW Embedded Module for ARM Microcontrollers
NI LabVIEW Embedded Module for ADI Blackfin Processors Development Kit
With choosing sensor, I suggest simple googling - with relativly little effort you can find many sensors. And you can pick on specification and requirements you have (just to note, National Instruments is not producing and usualy not selling sensors).
Regards,
Stefo

I need to know what kind of disk i need for my portege z835-sp3240L

I have an Portege z835-sp3240L Ultrabook and the SSD disk failed, so i need to replace it. I want to know what kind of disk i need (size, inches, etc) Please, can you give all the info about the disk. I live in Chile, so i can´t take it to a Toshiba repair place.

Portege Z835-SP3240L
Downloads here.
Essentially any capacity SATA disk that fits a laptop should do.
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to create recovery media, you can obtain it from Toshiba. Scroll down to Get Recovery Media here. Toshiba in the US will ship to Chile (see this message).
For instructions, see the section Restoring from recovery media, which begins on p. 65 of the User's Guide.
Portégé Z830 Series User’s Guide
If the disk uses advanced-format technology, see my message about that.
-Jerry

What kind of monitor is recommended for the new Mac Pro?

I want ot upgrade to the new Mac Pro from an imac, but what kind of display/monitor would be recommended and how much might it cost?

There are lots of 27"-30" monitors that would work, with the right connector adaptor. Many sell for around a 1/3rd of an Apple display. Personally, I like Samsung monitors, but LG makes some very nice ones, and even Dell's monitors are often quite good. Acer has some nice large screen monitors out too, and while the name might not be commonly known to many people, they are and have been a major equipment manufacturer for decades now and their quality is usually pretty good.
Keep an eye out for sales in the coming weeks and go look at some, preferably side by side.
You should be able to pick up something good in the 25"-30" range for easily under $500/$600 USD (on sale, perhaps well under $300).

What Kind of RAM i need for a 20" 2.16ghz iMac (white).........(MA589E/A)

Hi guys....
Well i have a 20" 2.16ghz iMac (white) the code is MA589E/A.
and now i need more RAM so i want to buy some RAM,, i have a few questions...
1) What's the Maximum ammount for this model?
2) What kind of RAM i need (please be specific).

Hi Alvi
Your Late 2006 iMac supports 3GB of PC2-5300 667MHz ram, see the Memory Specifications in the link below:
http://docs.info.apple.com/article.html?artnum=304284
Also here are the Technical Spec's for your iMac:
http://support.apple.com/specs/imac/iMacLate2006.html
Dennis

What level of certification is required for ECC 6 upgrades?

Hi everyone,
I'm already a ceritifed SAP technology consultant (up to NW2004), however need to update my certification for ECC 6 (netweaver 7).
What is the appropriate exam to sit (eg associate or professional) to be allowed to perform productive SAP ECC 6 upgrades?
Thanks
Shaun

Hi everyone,
Major update on the "do you need to be certified" topic ...
I finally got a reply from SAP Education regarding two queries I had regarding what level of certification was required as a basis "guy" to perform production SAP installations and upgrades.
SAP Education wrote:
You don't need to be certified to do installations. In reality, customers will have much more comfort having an install done by someone who is certified rather than someone who isnu2019t, but ultimately itu2019s the customeru2019s call.
I then asked if this was applicable for SAP upgrades also ...
SAP Education wrote:
Hi Shaun,
Indeed it is.
Best of luck!
I then went on to clarify that their is no support implications for customers who don't you certified Basis personel to perform their upgrades/installs:
Shaun wrote:
So your saying that although itu2019s preferable to be certified ... you donu2019t have to be, and there is no impact to the support provided by SAP?
SAP Education wrote:
Ultimately, SAP cannot mandate for individuals (excluding those employed by SAP) or SAP Partners to be certified to work on projects. However, customers and partners will employ the consultants to work on the projects, from what we have seen recently customers and partners are now asking for SAP certified consultants to work on implementation and upgrade projects.
Thus we suggest to have an advantage to be employed on future SAP projects that you are certified in the solution you will be working on, or upgrading to.
Example: If you are looking to work on an upgrade from CRM 5.0 to CRM 7.0 the customer would look for certified consultants in CRM 7.0
So it is solely up to you if you wish to certify yourself in the latest release of the solution you are working in.
I then rang SAP education and had a very pleasant discussion with one of the ladies there. She went on to explain that the requirement for certification really became an optional thing a few years back. SAP was no longer in a position not to support customers regardless of who they use to perform their upgrades/installs since a customer continues to pay their yearly maintenance costs - thus SAP is obligated to provide support.

What kind of licensing is best for SQL?

We are about to install Business One 2007A for a new customer. There will be about 10 users on the system, with one server. Currently the customer has MS SQL 2005 Server on all of their workstations but not on the server. They do not have information on the type of licensing they have for SQL. Is there a way to tell what kind of license they have? What kind is recommended for this configuration? Is there a way to transfer the SQL software from one of the workstations to the server? Any advice is appreciated.
Marcia

MS SQL Express edition is free and probably what they have installed if they do not know and they are legal. It is limited by the size of the database, # CPUs etc. Goto http://www.microsoft.com/Sqlserver/2005/en/us/compare-features.aspx for a full listing of features and limitations. SQL 2008 has slmilar versioning.
You may want to use the database sizing tool on the SAP Portal to estimate the size of their database to determine if they need a workgroup or standard edition.
Edited by: Gary Feldman on Jan 21, 2010 5:09 PM

What kind of licensing is required for using Adobe Flex Builder IDE for building Flex Applications?

I am looking for an IDE to build Flex Applications. Can you suggest what IDE to be used for this and what are the licensing I should procure for the same? What kind of support will be available with that license?

Thanks Empardopo. Do you have any suggestions? What kind of problems do you see with this tool. Also does Flash Builder 4.7 supports Flex SDK 3.5?

HT4865 Anybody know what kind of encryption is used for storage?

The iCloud security and privacy overview says it uses encryption for storage, but doesn't mention what kind/strength. Any idea?

Only Apple knows for certain, and they're not talking:
Apple would not disclose to us the methods used to encrypt data on disk, and merely claimed to use industry standard practices to ensure user data is stored securely.
from Ask Ars: how safe is my data stored in iCloud?

What kind of RAM I need for my Satellite A135-S4527?

I have a Toshiba Satellite A135-S4527. It came with 1GB RAM (DDR2 SDRAM). I'd like to upgrade it to 2... Just wondering if anyone knows what kind/brand of RAM is installed from the factory, and if it's installed as 2x512 or 1x1024.
Thanks.

The specification of your notebook model is not known to me but if you want to upgrade RAM check please this Kingston page .
Bye

What kind of certification is suitable for our product

Similar Messages

Maybe you are looking for