What kind of document i need for register iOS Developer Enterprise Program ?

Wond,
I have full access(SAP_ALL) on BI. What kind of Authorization on R/3 system to extract the data?
Thanks,

Similar Messages

Can i use one DUNS to apply for two IOS Developer Enterprise Program

can i use one DUNS to apply for IOS Developer Enterprise Program?

I would think so, but you'll probably need to contact Apple Developer Support and confirm:
http://developer.apple.com/support/ios/enterprise.html
Regards.

What kind of cert is needed for Client to MP/DP communication.

Hi,
What kind of Certificate is needed for Client to DP/MP communication? I know what the documentation says about setting up a Client cert and setting up auto enroll however, we are not able to setup auto enroll in a couple domains so we are trying
to figure out how to get certs on these other machines.
Will any cert listed in the personal store of the Client and the MP/DP work?
How does Config Manager pick the cert it needs to use for this on the CLient side and MP side?
Thanks in advance.
Thanks Lance

We manually created a cert for a machine using the Config Manager Client template. THis was the same template used to create the config manager client cert that we installed on the site system.
So both the Config Manager server and Client have a cert created with this template (and therefore show the same template id).
The client and config manager server have root certificate in the trusted root store from the same CA.
in our ccmmessaging.log file on the client we get the following error.
Certificate [Thumbprint ksdjfskfjdsfksjfskdfjskdjfskjfskdjfklsjdfslkfjdslkf] issued to 'machinename' doesn't have private key or caller doesn't have access to private key.
in the certificates MMC it shows for the certificate with the above thumbprint..
you have a private key that corresponds to this certificate.
What are we missing?
Thanks Lance

How can we relase app with URL for iOS Developer Enterprise program

Hi,
I want to release our developed IOS app to our employees through URL for iOS Developer Enterprise program.

Hello,
Thank you for your answer. Can you tell me where did you find this information ?
Thank you
Eric

I need to know what kind of disk i need for my portege z835-sp3240L

I have an Portege z835-sp3240L Ultrabook and the SSD disk failed, so i need to replace it. I want to know what kind of disk i need (size, inches, etc) Please, can you give all the info about the disk. I live in Chile, so i can´t take it to a Toshiba repair place.

Portege Z835-SP3240L
Downloads here.
Essentially any capacity SATA disk that fits a laptop should do.
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to create recovery media, you can obtain it from Toshiba. Scroll down to Get Recovery Media here. Toshiba in the US will ship to Chile (see this message).
For instructions, see the section Restoring from recovery media, which begins on p. 65 of the User's Guide.
Portégé Z830 Series User’s Guide
If the disk uses advanced-format technology, see my message about that.
-Jerry

What Kind of RAM i need for a 20" 2.16ghz iMac (white).........(MA589E/A)

Hi guys....
Well i have a 20" 2.16ghz iMac (white) the code is MA589E/A.
and now i need more RAM so i want to buy some RAM,, i have a few questions...
1) What's the Maximum ammount for this model?
2) What kind of RAM i need (please be specific).

Hi Alvi
Your Late 2006 iMac supports 3GB of PC2-5300 667MHz ram, see the Memory Specifications in the link below:
http://docs.info.apple.com/article.html?artnum=304284
Also here are the Technical Spec's for your iMac:
http://support.apple.com/specs/imac/iMacLate2006.html
Dennis

What Kind of microcontroller is needed for alarm system with PIR sensors

Hi ! I'm student at Technical University Varna ,
Bulgaria . I'm interessted to create my own alarm system with Labview,
but I'm not sure what kind of controller i need and what kind of PIR
sensors. Thank You

Hi xellos,
I'm not sure what you need, but if my feelings is right, than what you want to do is sort of motion detector based on PIR sensor and some ucontroller. It this is what you need, than once again, such a question is rather suitable for other discussion forums, like LabVIEW Embedded.
However, in general you can go for ARM or Blackfin when thinking about embedded platform. See following links to get more ingormation on ARM and Blackfin with LabVIEW:
NI LabVIEW Embedded Module for ARM Microcontrollers
NI LabVIEW Embedded Module for ADI Blackfin Processors Development Kit
With choosing sensor, I suggest simple googling - with relativly little effort you can find many sensors. And you can pick on specification and requirements you have (just to note, National Instruments is not producing and usualy not selling sensors).
Regards,
Stefo

What kind of RAM I need for my Satellite A135-S4527?

I have a Toshiba Satellite A135-S4527. It came with 1GB RAM (DDR2 SDRAM). I'd like to upgrade it to 2... Just wondering if anyone knows what kind/brand of RAM is installed from the factory, and if it's installed as 2x512 or 1x1024.
Thanks.

The specification of your notebook model is not known to me but if you want to upgrade RAM check please this Kingston page .
Bye

What kind of server power needed for 500 simultanious podcast downloads?

OK I run a VBulletin forum
We have average 500+ people on line at the same time, some times as many as 750..
I want to do some podcasting at the time of a trade show, relating to the forums topic.
What I DONT want is for the forum and server to grind to a halt because we suddenly get a lot of 'pull' / bandwith use because of podcast download / streaming.
Is there anywhere i can go to get info on the tech / server requirements for podcasts and the load they put on servers?
Thanks v much in advance!
Jules
G4 Ibook 600 Mac OS X (10.3.9)
G4 Ibook 600 Mac OS X (10.3.9)

I would suggest just hosting your MP3 files on libsyn
http://www.libsyn.com
They are setup to handle a lot of podcast bandwidth.
Remember there is no need to host your MP3 files where you have your main site - Just the XML (Rss Feed) should be on your main site.
Rob @ podCast411

What kind of adapter is needed for a camera sd card?

My girlfriend has a camera with an SD card, that is 23.5mm wide by 31.5mm long. The card slot on my MacBook Pro 17" is 35.5mm wide. I think I have the 2010 year model. What type of adapter do I need, please to be able to read the card?

yes there is it's called a express card sdcard reader but that's around $30+....
http://www.amazon.com/SIIG-Express-Card-Reader-Writer/dp/B000F1YFPA
here's a sandisk for $10...
http://www.amazon.com/Sandisk-SDAD109A11-Digital-Card-Express/dp/B000W3QLLW/ref= pd_cp_e_0/184-4721374-9492265

What kind of maintenance is needed for my imac

I am new to the Apple world. Just switched from PC. Wondering if there is any tips on how to maintain a clean smooth running iMac?

Klaus pretty much said it, just leave it alone and it should run happily for years. Keep it up to date by letting Software Update (System Preferences - Software Update) download updates frequently. I have mine set like:

HT4167 what kind of charger I need to get for my MacBook black 13?

What kind of charger i need for my MacBook 13?

You can get a new third party power adapter on eBay for about $20
http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313

Hi! a member said to get MPEG Streamclip to see what kind of codec i need

well,could anyone tell me how to have this program let me know what kind of codec i need?

I meant within the program, not when trying to open the file. You need to convert it to be able to play in QT
Here is a screenshot to give you an idea, MPEG Streamclip is reliant on codecs and that will determine what you can convert to. If something is missing than that is a codec you need.

Can an enterprise have separate iOS Developer Enterprise Account for its Department???

I read online on other forum that :
A single organization can enroll in up to five iOS Developer Enterprise Programs.
Multiple Enterprise distribution provisioning profiles can be created.
Each Enterprise distribution provisioning profile can only be associated with one App ID.*
Is this true?
Let say, a company already have one ios devloper enterprise account. Is it possible to register another devloper enterprise accounts for other departments?

Sudarshon wrote:
Is this true?
Let say, a company already have one ios devloper enterprise account. Is it possible to register another devloper enterprise accounts for other departments?
Why don't you just call Apple and ask?

What kind of security aspects needed in webdynpro application for ABAP?

Hi Experts,
What kind of security aspects need to be considered in webdynpro for ABAP application? Do I need to use Autorization check? Where can I use Authorization check in webdynpro for ABAP?
Please help!
Thanks
Gopal

Hi Gopal,
you can find the security issues for Web Dynpro ABAP here: http://help.sap.com/saphelp_nw2004s/helpdata/en/af/0489ce55002f44a8c927371bedf719/frameset.htm
Regards, Heidi

What kind of document i need for register iOS Developer Enterprise Program ?

Similar Messages

Maybe you are looking for