What kind of error is this? Can't find answer

I loaded up an H.264 file into FCP X. I did my edits and everything looks fine on my primary storyline, no issues with playback at all. Video played back with my edits. My edits are basic edits (cutting of clips). And I have background rendering set to on
I go to share, export to compressor 4. In side of compressor I click on preview and I get this. Nothing is showing up in the preview.
I found this strange but I went and did the encode anyway thinking maybe it just couldn't show me a preview. The video output was the same as the preview.
I don't know what I am doing wrong as everything looks correct in FCP X. Not sure why Compressor 4 can't see the video

export to compressor 4
You mean Send to Compressor?
Try trashing your project render files and don't re-render.
Is playback set to proxy or original/optimized?

Similar Messages

General question: what kind of error is this

This has happened to me a couple times now. I'm in Apple Motion, working on projects that aren't too intensive, when everything but the mouse freezes. I can still move it around but I can't click on anything or change applications (not even with the keyboard). I hesitate to call this a "crash" since the app doesn't quit and the computer doesn't completely lock up. Would you call this a freeze, kernel panic, what?
This may be related to using a Matrox MXO device with my video card, as it was turned on in both cases. Trying to work with their tech support to figure out if this is the culprit...

Oh yes, the Console log. I know it well.
Here's what I found in system.log at the time of the freeze:
ATIRadeon::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0xb803c100
** ASIC Hang Log Start **
(followed by lots of kernel messages)
So yeah, definitely a graphics card issue, although maybe not the Matrox? Hard to say.
I've had this setup (ATI Radeon x1900, Dual Apple 23" monitors, Matrox MXO) for a couple months now and it was running great under Tiger 10.4.11. It wasn't until I installed Leopard that this started happening. FWIW, I didn't upgrade, I installed it on a brand new drive that's in drive slot #4, ran all the system and Quicktime updates afterwards. Everything seems to run OK except for this occasional glitch. I ran First Aid and Repaired permission afterwards but I do regular maintenance anyway so I don't think that's going to fix anything.

What kind of error is this

C:\source>java Average1
Assertion failed: offset < fFileSize, file ..\..\..\..\src\share\native\sun\awt\
font\fontmanager\fontobjects\fontObject.cpp, line 240
abnormal program termination
the above source code can be compiled
but when i run java it occurs above error
ive tried to install back my java jdk 1.3 on windows 2000 but it still has the same result
its weird that at my friends computer it can run well
my email [email protected]

import javax.swing.JOptionPane;
public class Average1 {
public static void main( String args[] )
int total, // sum of grades
gradeCounter, // number of grades entered
gradeValue, // grade value
average; // average of all grades
String grade; // grade typed by user
// Initialization Phase
total = 0; // clear total
gradeCounter = 1; // prepare to loop
// Processing Phase
while ( gradeCounter <= 10 ) { // loop 10 times
// prompt for input and read grade from user
grade = JOptionPane.showInputDialog(
"Enter integer grade: " );
// convert grade from a String to an integer
gradeValue = Integer.parseInt( grade );
// add gradeValue to total
total = total + gradeValue;
// add 1 to gradeCounter
gradeCounter = gradeCounter + 1;
// Termination Phase
average = total / 10; // perform integer division
// display average of exam grades
JOptionPane.showMessageDialog(
null, "Class average is " + average, "Class Average",
JOptionPane.INFORMATION_MESSAGE );
System.exit( 0 ); // terminate the program

What kinds of error iCloud symbol with ! inside?

added song purcahsed outside of iTunes to library. iCloud symbol shows cloud with ! inside. what kind of errors produce this symbol? how to correct?

See http://support.apple.com/kb/ts4124.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly.

I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.

Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.

It said ont he box I was buying an iTouch 3G and now I can't upgrade to iOS5 because it's really a 2G, what kind of BS is this?

It said ont he box I was buying an iTouch 3G and now I can't upgrade to iOS5 because it's really a 2G, what kind of BS is this? I'm starting to hate Apple if the only way to upgrade is to buy a newer iTouch.

Bring the appropriate paperwork to the place yur purchased the iPod and demand compensation for the misrepresentation.

"What kind of file is this" Loop Browser error

Hi there,
I just re-installed Logic after doing an erase & install of my system. Seems okay so far, except that when I open the Loop Browser and click on a loop to hear it, I get the error message:
"Club Dance Beat 002 [or whatever the loop name is].caf" - what kind of file is this?
And then there's an 'Abort' button, but no other options. The file won't preview, nor will it drop into my Arrange window when I try to drag it over. This happens with both green & blue (midi & audio) loops in the browser.
Odd. Any thoughts? Thanks!

Sorry so long to respond to this. Apparently my 'Subscribe to this Topic' notification thing isn't working, and I didn't realize there had been any responses....
I've re-installed from the Logic content disc, but still no change. From the other discussions I've read, it looks like most folks encountered this when they installed GB08 AFTER Logic was already on their system. After I did my erase & install, I installed iLife 08 BEFORE I installed Logic Pro. Would that be causing this weirdness?
Odder still is that the ONLY loops I'm finding on my computer are the GB08 Loops (and iLife sound effects), but then maybe I'm not looking in the right place for the Logic loops? Further, in my GB08 loops folder, there seem to be .caf and.aiff versions of each loop, but no matter what I try to use in Logic's Loop Browser, I get the same error about the caf file....
Perplexed.

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
i receive the error 12 This device cannot find enough free resources that it can use. please help

1. You have placed problem in wrong forum, or use different Windows operating system
2. Double check your resources, namely in Disk manager. What is free space on HDD?
Regards
Milos

'what kind of error 'plzzz help

hi all
plz check the following code and error which it is givn 2 me. how shld i rectify it? not able to get what kind of error it is.
*& Report ZNBS_FI_FS10N
REPORT ZPRAC_FI_VENDORSTATEMENT.
Report Title : Display Line item balances for VENDORs with opening balances
Functional Consultant : Mr ShreeHari
ABAPER : Sanjay K, NBS
TYPE-POOLS slis.
DATA : fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
 ls_event TYPE slis_alv_event,
 repid LIKE sy-repid.
DATA : b_layout TYPE slis_layout_alv.
DATA : gt_events TYPE slis_t_event WITH HEADER LINE.
DATA : lt_list_commentary TYPE slis_t_listheader,
 l_logo TYPE w3_qvalue.
TABLES : BSAK, ska1, bsis, bkpf, thead, t003, t003t, LFA1, skat.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS pbukrs FOR bsis-bukrs default '1000'.
SELECT-OPTIONS pLIFNR FOR LFA1-LIFNR default '410028'.
SELECT-OPTIONS pbudat FOR bsis-budat OBLIGATORY default '20060401' to '20061219'.
SELECTION-SCREEN END OF BLOCK b1.
DATA : BEGIN OF itab OCCURS 0,
 belnr LIKE bsis-belnr,
 bukrs LIKE bsis-bukrs,
 gjahr LIKE bsis-gjahr,
 blart LIKE bkpf-blart,
 bldat LIKE bkpf-bldat,
 budat LIKE bkpf-budat,
 LIFNR LIKE LFA1-LIFNR,
 dmbtr LIKE BSAK-dmbtr,
 wrbtr LIKE BSAK-wrbtr,
 shkzg LIKE BSAK-shkzg,
 ltext LIKE t003t-ltext,
 END OF itab.
DATA TEXT(60). " LIKE t003t-ltext.
DATA jtab LIKE itab OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF final OCCURS 0,
 belnr LIKE bsis-belnr,
 bukrs LIKE bsis-bukrs,
 gjahr LIKE bsis-gjahr,
 blart LIKE bkpf-blart,
 bldat LIKE bkpf-bldat,
 budat LIKE bkpf-budat,
 LIFNR LIKE LFA1-LIFNR,
 debit LIKE BSAK-dmbtr,
 credit LIKE BSAK-wrbtr,
 shkzg LIKE BSAK-shkzg,
 balance LIKE BSAK-dmbtr,
 ltext LIKE t003t-ltext,
 END OF final.
DATA : BEGIN OF output OCCURS 0,
 belnr LIKE bsis-belnr,
 bukrs LIKE bsis-bukrs,
 gjahr LIKE bsis-gjahr,
 blart LIKE bkpf-blart,
 bldat LIKE bkpf-bldat,
 budat LIKE bkpf-budat,
 LIFNR LIKE LFA1-LIFNR,
 ddebit LIKE BSAK-dmbtr,
 ccredit LIKE BSAK-wrbtr,
 shkzg LIKE BSAK-shkzg,
 balance LIKE BSAK-dmbtr,
 ltext LIKE t003t-ltext,
 hkont LIKE bsis-hkont,
 bschl LIKE bsis-bschl,
 TXT50 LIKE SKAT-TXT50,
 END OF output.
********FOR OPENING BALANCE.
DATA : BEGIN OF open OCCURS 0,
 wrbtr LIKE BSAK-wrbtr,
 dmbtr LIKE BSAK-dmbtr,
 bukrs LIKE BSAK-bukrs,
 shkzg LIKE BSAK-shkzg,
 END OF open.
DATA clear LIKE open OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF bal OCCURS 0,
 dbal LIKE bsis-wrbtr,
 cbal LIKE bsis-dmbtr,
 shkzg LIKE bsis-shkzg,
 END OF bal.
DATA date TYPE sy-datum.
MOVE pbudat-low TO date.
date = date - 1.
DATA: BEGIN OF balance OCCURS 0,
 debit LIKE bsis-wrbtr,
 credit LIKE bsis-dmbtr,
 total LIKE bsis-dmbtr,
 END OF balance.
DATA : BEGIN OF line OCCURS 0,
 belnr LIKE bsis-belnr,
 dmbtr LIKE bsis-dmbtr,
 wrbtr LIKE bsis-wrbtr,
 hkont LIKE bsis-hkont,
 gjahr LIKE bsis-gjahr,
 bukrs LIKE bsis-bukrs,
 shkzg LIKE bsis-shkzg,
 budat LIKE bsis-budat,
 blart LIKE bsis-blart,
 bschl LIKE bsis-bschl,
 TXT50 like skat-txt50,
 END OF line.
TOP-OF-PAGE.
PERFORM top_of_page.
START-OF-SELECTION.
*perform integrate.
PERFORM fetch.
PERFORM build_catalog.
PERFORM layout.
END-OF-SELECTION.
PERFORM display .
*& Form Fetch
 text
--> p1 text
<-- p2 text
FORM fetch .
SELECT * FROM BSIK INTO CORRESPONDING FIELDS OF open WHERE bukrs IN pbukrs AND budat LE date AND LIFNR IN pLIFNR.
 COLLECT open.
ENDSELECT.
SELECT * FROM BSAK INTO CORRESPONDING FIELDS OF clear WHERE bukrs IN pbukrs AND budat LE date AND LIFNR IN pLIFNR.
 COLLECT clear.
ENDSELECT.
LOOP AT open.
 MOVE : open-dmbtr TO bal-dbal,
 open-wrbtr TO bal-cbal,
 open-shkzg TO bal-shkzg.
 IF open-shkzg = 'H'.
 open-dmbtr = open-dmbtr * -1.
 open-wrbtr = open-wrbtr * -1.
 ENDIF.
 COLLECT bal.
ENDLOOP.
LOOP AT clear.
 MOVE : clear-dmbtr TO bal-dbal,
 clear-wrbtr TO bal-cbal,
 clear-shkzg TO bal-shkzg.
 IF clear-shkzg = 'H'.
 clear-dmbtr = clear-dmbtr * -1.
 clear-wrbtr = clear-wrbtr * -1.
 ENDIF.
 COLLECT bal.
ENDLOOP.
CLEAR bal.
LOOP AT bal.
 IF bal-shkzg = 'H'.
 MOVE : bal-dbal TO balance-debit.
 CLEAR bal-dbal.
 ELSE.
 MOVE bal-cbal TO balance-credit.
 CLEAR bal-cbal.
 ENDIF.
 COLLECT balance.
 CLEAR balance.
ENDLOOP.
********FOR LINE ITEMS
SELECT * FROM bkpf INTO CORRESPONDING FIELDS OF itab WHERE bukrs IN pbukrs AND budat IN pbudat .
 SELECT * FROM BSAK INTO CORRESPONDING FIELDS OF itab WHERE bukrs IN
 pbukrs AND belnr = itab-belnr AND gjahr = itab-gjahr.
 IF itab-shkzg = 'H'.
 itab-dmbtr = itab-dmbtr * -1.
 itab-wrbtr = itab-wrbtr * -1.
 ENDIF.
 SELECT ltext FROM t003t INTO itab-ltext WHERE spras = 'EN' AND blart = itab-blart.
 APPEND itab.
 ENDSELECT.
 ENDSELECT.
ENDSELECT.
SELECT * FROM BSIK INTO CORRESPONDING FIELDS OF itab WHERE bukrs IN pbukrs AND budat IN pbudat AND LIFNR IN pLIFNR.
 IF itab-shkzg = 'H'.
 itab-dmbtr = itab-dmbtr * -1.
 itab-wrbtr = itab-wrbtr * -1.
 ENDIF.
 SELECT ltext FROM t003t INTO itab-ltext WHERE spras = 'EN' AND blart = itab-blart.
 APPEND itab.
 ENDSELECT.
ENDSELECT.
DELETE itab WHERE LIFNR NOT IN pLIFNR.
Error: <%_L002> IS NOT AN INTRNAL TABLE-THE OCCURS SPECIFICATION IS MISSING)
error at delete statement.
its urgent.
thanks all in advance.
appropriate reward will b given.

hi gaurav,
u created internal table itab with out header line and u r trying to delete it from internal body itself which isn't possible.
so do like this,
create workarea [wa_itab] of same structure of itab [internal table] and give delete statement as
delete wa_itab from itab where condition.
if helpful reward some points.
with regards,
suresh babu aluri.

HT2736 I'm trying to send my sister who lives in the UK, a birding app, but when she tries to load it onto her iPhone, it complains and says it was purchased in the US, and cannot be loaded in the UK. What kind of nonsense is this? What's the solution?

I"m trying to gift my sister who lives in the UK a birding app, but when she tries to load it onto her iPhone, it complains and says a US purchased app cannot be loaded into a UK iPhone account. What kind of nonsense is this? what's the solution?

You can currently only gift content (apps, music, gift certificates) to people whose account is based in the same country as yourself - so if you and your account are not UK-based then you can't gift to a UK account holder. You can either try resending it to somebody who is in the US with a US account (resending) or try contacting iTunes support and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

What kind i do with this issue on this iphone

what kind i do with this issue on this iphone any recomendation

Well, you have encountered the activation lock on the phone and there is absolutely nothing you can do about this.
Where did you get the phone from? You need to contact the previous owner of the phone to get this information and if you can't, then the phone is useless to you and you will never be able to use this phone again.
Congratulations on owning a very expensive paperweight.

What kind of company is this? Disrespectful of customers!!!!! CHEAP!

I got a Zen xtra about 7 or 8 months ago. I couple days ago I finished using it and plugged it into its charger. About an hour ago I went to use it again and it wouldn't turn on. I took out the battery and replaced it, and still nothing. So I went and pluged it into the wall. It turned on, but the icon in the corner just displayed a plug, little battery. I take that to mean that Creative is too cheap to do any product testing or quality control. What the F*ck?! I use my Xtra in the car when I go to work, and I plug it back in every night. I have never dropped it. There is NO reason why this should have happened! I see from some other post that other people have this problemn as well! Apparently there is no recourse other then me spending more money and doing without my mp3 player for an extended period of time. Is Creative doing anything about this for people who are out of their 90 days or whatever absurdly short period it is? Let me guess. And what's with only being open for technical support Monday through Friday?! Everyone who is having this problem deserves to have the problem fixed FOR FREE!!! I bought this product thinking that Creative had standards, apparently they don't!
Joe
And yes I tried disk clean up and flipping the power supply on and off. This battery was never left uncharged for more than a few hours!
What kind of why is this to treat customers?! The d@mn thing didn't even work for a year!

JoeMarzen wrote:I take that to mean that Creative is too cheap to do any product testing or quality control.
In all fairness one product going wrong doesn't equate to poor quality control.
I see from some other post that other people have this problemn as well!
Well you are on a support board, Creative sell millions of players, so like any electronics device unfortunately a small percentage go wrong. This is the nature of commercial electronics unfortunately.
Is Creative doing anything about this for people who are out of their 90 days or whatever absurdly short period it is?
Warranty is partly depedent on the laws of your country. In the EU for example there is legislation to ensure that all electronics must have a minimum warranty of year. Of course in the USA you pay less for these kinds of goods.
I'm fairly sure the Xtra had a warranty of 3 months parts and labour, and 9 months parts only. This might mean you only have to pay an administrati've fee to have it fixed, but double check with support to be sure. Links for contacting support are in the FAQ post.
And what's with only being open for technical support Monday through Friday?!
I agree it's a bit of a pain, but of course Creative are trying to save expense like a lot of other companies.
Everyone who is having this problem deserves to have the problem fixed FOR FREE!!! I bought this product thinking that Creative had standards, apparently they don't!
Unfortunately the warranty had terms and was available for you to see when you bought it. I appreciate it's awful when a device goes wrong, but them's the breaks unfortunately. I hope you can contact support on Monday and get it solved for minimum cost.

What kind of forum is this????

What kind of forum is this??? Last 7-8 days we post questions and we get no response from anyone. Is there any other good forum available for Oracle /SQL type of questions? If yes can anyone give that site name.
Hope atleast this time i will get response.
Thanks
Prity

<BLOCKQUOTE>quote:<HR>Originally posted by prity:
What kind of forum is this??? Last 7-8 days we post questions and we get no response from anyone. Is there any other good forum available for Oracle /SQL type of questions? If yes can anyone give that site name.
Hope atleast this time i will get response.
Thanks
Prity<HR></BLOCKQUOTE>
I just reply to your question (May 20th), did you post any other question 7-8 days ago? Can you please send it again?

I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

I charged my phone and now I can't get it to turn on again. What do I do? I can't find a solution here. All I get are error messages.

Try pulling the battery for 10 minutes and putting it back in. Try pressing and holding the power button for a while 15-30 seconds to see if it will respond. Did anything happen to it, drop, submersion, etc. Was it functioning before you charged, When did it last work. Are you sure it charged up and the charger is working.

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

Meg81 error 214 indicates a download data validation error. This means that the update you downloaded became corrupted likely during the download process. I would recommend utilizing the suggestions listed in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html to attempt to improve the stability of your Internet connection.
You can also find information on how to review your download logs which may provide additional information regarding the failure of the download.

What kind of error is this? Can't find answer

Similar Messages

Maybe you are looking for