What kind of graphic card do I need for second screen?

I have a Mac Pro with GTX 680 card that outputs to a 27" Cinema Display and 42" TV. The TV screen is a few frames of, so I understand I need a separate videocard for the TV so I can adjust this with frame offset in FCP.
What kind of card is suitable for this? There is 30m distance from Mac to TV, is this too long for HDMI cable?

I don't know.  My experience with Aja IO card is that's it's more complicated configuring it (at least with fcp7).  I have a friend with a macpro and every time we need to use it, it requires playing around with control panel and the view settings within fcp.  Maybe operator error.  The BlackMagic just usually works although I found with Avid Media Composer 7, if you tried to load material that didn't match the project settings, you could not get the project to every play out through the intensity.  You'd have to create a new project and open your existing bins in the new project.  Took me a while to figure out what was going on. 
Aja's support is supposedly much better, but I did get answers via email from blackmagic with the avid issue.  Took a few days, but they did come thru. 

Similar Messages

  • What kind of video card do I need for Motion 2?

    So I just went to load Motion 2 on my laptop - I just had it upgraded to a 120 gig hard drive from a 60 gig, now I have room for all my software but as I went to install Motion 2 I got an error message saying I don't have the right or appropriate video card...Well, what do I need, becasue every other app in FCP studio works fine on my lap top with the video card I have.
    What do I need, where to get it and how much?
    Thanks much
    KB

    You need a video card supported by the program, as listed in the Technical Specifications - Sorry
    Even if you could find a Dr. Frankenstein to put a card in it would be scetchy at best and pricey to say the least.

  • What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

  • I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

    I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

    Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

  • I will be traveling to London for 2 months what kind a converter/adapters do I need for my apple products

    I will be traveling in London for school for 2 months what kind of converter/adapter do I need for my apple products?

    Covers your Mac and your iToys:
    http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ

  • What upgrade graphic card do i need for a early 2008 mac pro

    I have a early 2008 Mac Pro.  ATI Radeon HD 2600 XT 256 MB is what i have now.  What is a good upgrade graphic card to get.

    The GTX 780 6GB runs fine on the dual PCIe internal power cables -- as does the GTX 680 and Radeon HD 7950. The same can't be said of the GTX TITAN or GTX 780 Ti or Radeon R9 280X -- all of which require an auxiliary power feed to avoid a nasty power down of your tower at the worst moment when too much wattage is demanded of the Mac Pro's factory power supply.
    Did I mention that the GTX 780 with 6GB of GDDR5 matches the 6GB of GDDR5 in the TITAN?
    The one fallacy to my 'sweet spot' award has to do with OpenCL. In case you hadn't noticed, the AMD Radeon GPUs smoked the NVIDIA GeForce GPUs running Photoshop's OpenCL accelerated Iris Blur filter and rendering LuxMark's OpenCL accelerated Room scene.
    - http://www.barefeats.com
    So depends on budget, whether you want a PC card for less but no "early EFI boot screen" prior to drivers loading, and what apps and needs you have.
    The one thing for sure is that 2600XT should have been retired ages ago and even more so with 10.8.3 and above, it could be trouble or just... PITA/POS.

  • What kind of graphics cards can I get?

    I have a Compaq Presario CQ50 107NR
    My graphics card is GeForce 8200M G
    I need a  better graphics card but I do not know what is compatible with the laptop. Can someone give me a list of upgraded graphics cards I can get? I am wanting to play Diablo 3 but my card is too weak.

    Hi:
    The video adapters are not upgradable without replacing the entire motherboard. The only motherboard I see with better graphics has the GeForce 9200M, which I doubt will be much better.
    You would be better off selling or trading your notebook in and buying one with the graphics solution you are looking for.
    Paul

  • Help!! What kind of graphics card can I upgrad my G5 1.8ghz dual?

    Can anyone help me to find a graphics card for my G5 Tower 1.8Ghz dual core in order to install final cut studio2 and be able to use all of the software? My cpu came with NVDia GeForceFX 5200 (not Ultra).
    Which Graphics card can I use or should I use to run the whole final cut studio2 (especially Motion 3 and Color)? Please help.
    Message was edited by: nydragon5

    Hi-
    So, you have a Dual 1.8 PPC G5, correct? 8x AGP graphics(?).
    The two choices that you have, are, the ATI Radeon X800XT, or the Geforce 6800 Ultra.
    Here are some benchmarks for comparison sake. Note that the 9800 is a possibility, but the X800 is better for FCP.
    This benchmark shows how pitiful the 5200 really is.
    One other option, is a flashed Geforce 7800 GS. These benchmarks show the possibilities.

  • Which Graphics Card do I need for H520S

    I have a few questions for you lovely people out there and hope you can help.
    My son has asked me for a new Graphics card for his PC.(Not a xmas present)
    On an old post it was suggested that an Nvidia Geforce GT620 1Gb or an AMD Radeon HD7570 2Gb were the ones to go for. Is this still the case or are there newer/ better cards available.
    I have a reasonable budget of £100 ($160)
    If these are the cards to upgrade his PC with, will I need to upgrade the PSU? If so what unit do you suggest.
    I would need the graphics card and PSU combined to be near my budget.
    Lastly, Is it easy to install the graphics card and PSU (If needed) myself or would I need specialist help.
    Hoping you can help
    Happy Christmas
    Mark

    so i now need a new graphics card so i only have to use the new Mac mini port connecting cable, but which card to buy and should i remove the older card.
    Replacing the graphics card will do nothing to help you unless your current card doesn't have a dual link DVI port (most all 2 DVI port G5 cards do have at least one dual link DVI port).
    There are NO graphics cards that will work in the G5 that have mini display port.
    I don't want to use multi cable connections 
    Using a dual link DVI port from a G5 graphics card, connection to the iMac via the Atlona adapter is the only way to achieve use of the iMac as a monitor with a G5.
    http://www.atlona.com/Atlona-Dual-Link-DVI-to-Mini-DisplayPort-Converter-USB-Pow ered.html

  • What replacement Airport Extreme Card do I need for Macbook Pro 8.2?

    It looks like my Airport Extreme Card has failed, although the Blue Tooth  is fine. I'm assuming that I need to buy a replacement but am struggling to find what I need. I have a Macbook Pro 15" early 2011 i7 2.2ghz so just need to know what cards are compatable.
    It's been a slow failiure, over a couple of months but now it is not even recognised in the System profiler. I am happy to open the case and install a new card, I just need t know what will work. Is there a better card than the original out there, or even an upgrade? I've upgraded the Ram and had to change the HHD already, so as a machine it's starting to resemble the Philosopher's Axe...
    Any advice would be greatly appreciated!

    Hi Ralph,
    Thanks for the speedy response!
    I"ve had the case open when I changed the HHD and Ram, and can seen where the card slots in. It's held by a supporting arm which lifts up when disconected from the Logic Board. it's weird looking inside, as you can see there are many of the same componants I've seen in other laptops. It is a tidier build though. I'm confident that if I detach the 3 antener conectors and remove the retainer screws a new card will fit back in.
    The Genius Bars here in London are highly over subscribed, and I don't think I have the time or budget for that.
    I'll keep plugging away, and see what happens. I'm almost getting used to being tethered to the Ethernet cable. I've only tripped over it 20 times a day!
    Take it easy.

  • What kind of cellular plan do you need for iPod Touch?

    I'm thinking of replacing my Classic with a Touch. What kind of cellular service lan do I need?

    none. The iPod does not have a cellular radio. The iPod touch is wifi only.

  • Please tell me wht Kind of Graphic card can i Use for the Specified Mainboard

    1.Product Type:MSI PM8M-V Socket 478 mATX Motherboard MS-7104 v2.X, VIA P4M800 Chipset, Supports Intel P4 CPU, SATA, DDR400
    2.CPU Type:Intel P4
    3.Memory Type: 184-pin 2.5v DDR SDRAM (am using 1 gb)
    4.Power Supply Type:AC
    5.Operating System:Windows Xp
    6.Problem Description:
    i Am A 3d Animator and i wish to install a Additional Graphic Card to my Mainboard.i Wish to add a Nvidia Geforce 8500 GT (256mb) to my Mainboard.i wanted to know if it is compatible with my Mainboard and also will it be plugged in PCI slot or AGP...i Prefer to have a PCI graphic Card and if it is Not den Plzz Let me know about any othe graphics card in same price range dat would support my Pc.
    plzz reply fast.....Its urgent

    Quote from: BOSSKILLER on 03-September-07, 09:26:20
    "so plzz tellll wers the Probs"
    In simple words the problems is that your mainboard is too old and don't have PCI-E slot...
    Read the replies which you have above 1st..
    As mates and MSI Tech as well notified you can't use PCI-E VGAs into your board...
    You need a AGP one, here is examples of VGA's that can use:
    Ati: (few good choices)
    Radeon X1950PRO: http://global.msi.com.tw/index.php?func=proddesc&prod_no=1146&maincat_no=130&cat2_no=137
    RX1650PRO-TD512: http://global.msi.com.tw/index.php?func=proddesc&prod_no=1145&maincat_no=130&cat2_no=137
    Nvidia: http://global.msi.com.tw/index.php?func=prodpage2&maincat_no=130&cat2_no=136&cat3_no=139
    At all you can use any AGP VGA... Just make sure that your PSU is powerfull enough.
    hey all frnds thnk for helping me.....can u tell me which card will be the best for my PC........my frnd has a 6200 series...howz it??

  • What kind of audio interface do I need for audio out from MainStage 3?

    I have a Yamaha MO8 that I use for playing in the worship band at my church. In the past, I've just directly routed audio from the MO8 through a direct box and into the sound system.
    I'm looking to switch my setup and use the Yamaha MO8 as a midi controller in MainStage 3. I have this part working — the problem is getting the audio from my MacBook Pro.
    The audio output sounds fine through the MacBook Pro speakers or through headphones plugged into the audio out / headphone jack; however, if I plug the direct box into the MacBook Pro's audio out / headphone jack, the signal the sound system gets is very pretty weak and very distorted.
    I'm assuming I need an audio interface between my MacBook Pro and the direct box / sound system. Since it's a 2010 MacBook Pro, I'm assuming my only output option is USB (unless the digital audio out can be used). If that's correct, would something like the Scarlet 2i2 work for me?
    Thanks…

    Yes, you'll need some sort of audio interface to get a good signal back to your mixer. 
    The Scarlet 2i2 would work for you but you may find a few limitations.  I use a MOTU Audio Express and it has the advantage of being a mixer as well, so I can mix in a backup signal from the onboard audio outs of my controller (Kurzweil PC3x) in case MainStage goes down (it happens on rare occasion).  Firewire is my preference so the MOTU checks that box.  I also like that I can connect my MIDI cables to the MOTU and have one cable going into the computer.
    If you need this sort of compact redundancy, I would shoot a little higher than the Scarlet.  If you don't feel the need for a backup line and USB works for you, then the Scarlet unit would be an excellent value. 

  • What kind of wireless card to I need to use airport on my pc

    I have a can I use a compaq presario sr2050 nx, the main house computer is and apple.

    You can use any wireless card which supports an 802.11 protocol also supported by the base station; currently, those are 802.11a, 802.11b, 802.11g, and 802.11n.
    (43384)

  • What kind of hard drive do I need for my HP Pavilion dx6650us entertainment notebook PC?

    I have a HP Pavilion dx6650us entertainment notebook PC that has the BSOD. Even when I run it in SafeMode I have absolutly NO desktop. I've tried EVERYTHING. I have lost hope. So im just going to buy a new hard drive. Does anybody have ANY idea what type of hard drive I need and aprox. how much it might cost? Please let me know(: Thank you.

    It is a standard laptop 2.5 inch wide SATA hard drive like shown in this picture:
    Look at Page 9 of this Manual:
    Drive Manual
    This will show how to replace it. Do you have the recovery disks that you could have made when the laptop was new? If not you are going to have to get a Windows disk or some HP recovery disks.
    Here is a drive that would work for you.
    160 gig 7200 rpm drive for $45
    This drive will be faster than what you had and is a bit larger. A very good deal for the price. You perhaps already have a second hard drive in the system. See the manual on page 9 for the location of both hard drive bays. You could move the secondary drive (if there is one) over into the primary position without spending a nickel. In fact, that is a great idea. If you do that and still get the BSOD, then it might well be something else going on other than the hard drive. The hard drive is a likely issue but it could also be the memory and other things, too. However, I think the second drive is only found in the dx9000 models so do not be shocked if you do not have a secondary hard drive bay in your machine. I have never seen a dx6000 series but am pretty sure it is a lot like the dv6000 series of which I have seen more than my share. They have a lot of issues and I am concerned you will be spending money on a new hard drive that will not fix anything.
    Feel free to post back with issues or questions.

Maybe you are looking for

  • How to set to bold a single word in the text box?

    How can I set to bold a single word in the text box? When I try, it puts the whole text bold.

  • Sales order creation  by using LSMW

    Hi All, We have designed one LSMW program by which we are able to create Sales Orders. Import method for this LSMW is *BAPI Method*.So finally by processing IDOC steps, sales orders getting created. My req is   1) We have to schedule a background job

  • I have lost the firefox icon. How do I get it back?

    y firefox icon is gone and the only way i can get into firefox is by going through aol. I really don't like doing this. Also the only way I can get into my home page, is also through aol. Please do something.

  • Error message in db02

    Hi, We have migrated our test system from windows(ms sql) to linux(maxdb). All our products data was there there were no issues with that system. when i try to execute TX DB02 i get the following error message saying Name and Server : DE5 - sgtr-s-de

  • Can't open iphoto: but I never used a later version?

    Hi everyone, I can't open iphoto now, it gives me some message about how I've edited my photos in a more recent version and thus need to update the software on my computer. The odd thing is that I've not been working in any other versions of iphoto o