What kind of graphics cards can I get?

I have a Compaq Presario CQ50 107NR
My graphics card is GeForce 8200M G
I need a better graphics card but I do not know what is compatible with the laptop. Can someone give me a list of upgraded graphics cards I can get? I am wanting to play Diablo 3 but my card is too weak.

Hi:
The video adapters are not upgradable without replacing the entire motherboard. The only motherboard I see with better graphics has the GeForce 9200M, which I doubt will be much better.
You would be better off selling or trading your notebook in and buying one with the graphics solution you are looking for.
Paul

Similar Messages

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

Help!! What kind of graphics card can I upgrad my G5 1.8ghz dual?

Can anyone help me to find a graphics card for my G5 Tower 1.8Ghz dual core in order to install final cut studio2 and be able to use all of the software? My cpu came with NVDia GeForceFX 5200 (not Ultra).
Which Graphics card can I use or should I use to run the whole final cut studio2 (especially Motion 3 and Color)? Please help.
Message was edited by: nydragon5

Hi-
So, you have a Dual 1.8 PPC G5, correct? 8x AGP graphics(?).
The two choices that you have, are, the ATI Radeon X800XT, or the Geforce 6800 Ultra.
Here are some benchmarks for comparison sake. Note that the 9800 is a possibility, but the X800 is better for FCP.
This benchmark shows how pitiful the 5200 really is.
One other option, is a flashed Geforce 7800 GS. These benchmarks show the possibilities.

What kind of graphic card do I need for second screen?

I have a Mac Pro with GTX 680 card that outputs to a 27" Cinema Display and 42" TV. The TV screen is a few frames of, so I understand I need a separate videocard for the TV so I can adjust this with frame offset in FCP.
What kind of card is suitable for this? There is 30m distance from Mac to TV, is this too long for HDMI cable?

I don't know. My experience with Aja IO card is that's it's more complicated configuring it (at least with fcp7). I have a friend with a macpro and every time we need to use it, it requires playing around with control panel and the view settings within fcp. Maybe operator error. The BlackMagic just usually works although I found with Avid Media Composer 7, if you tried to load material that didn't match the project settings, you could not get the project to every play out through the intensity. You'd have to create a new project and open your existing bins in the new project. Took me a while to figure out what was going on.
Aja's support is supposedly much better, but I did get answers via email from blackmagic with the avid issue. Took a few days, but they did come thru.

HT1766 What kind of trade in can I get for my iPad 3G 64G

I have a Wi-Fi 3G and I am looking to upgrade. What kind of pricing am I looking at as a trade in?

Best Buy and Amazon will also give you store credit for trade ins. THey have online calculators you can explore, putting in the model and condition and get an estimate of what they'll pay you (actual amount depends on condition when they examine it)
Best Buy you can walk in, Amazon you have to mail it in.

What kind of video intro can I get away with?

I would like to have a video of about the size and quality of this apple Final Cut Studio NAB video.
http://www.apple.com/finalcutstudio/action/?movie=nab
Only not nearly as long. Well under a minute for sure! Can I get away with this in iweb with autoload setup for the initial splash screen of my website. I'll be using a .mac account.
Is there a way to make it have some type of loading indicator and a skip past intro thing? Will it take 3 days to load? Advise? Thanks!

Hello John,
The biggest factor on whether people will watch your movie intro is dependent on their connection speed. If all your viewers have cable/dsl then it probably isn't a problem, if you are getting lots of low speed visitors then they won't take the time to let it load—probably.
If you don't already have Statcounter ( http://www.statcounter.com/ ) and or Goggle Analytics ( http://www.google.com/analytics/ ) you should get both. This will allow you to monitor your visitor demographic, giving you the ability to design your site to the needs of the majority.... plus it is fun to see hits come in from across the country and around the world.
Any how, I degress. Even if all your users have fast connection speeds you will probably have better luck with a flash movie which yields a higher quality to lower size ratio then the Quicktime format. Plus, more people have flash installed on their computers then Quicktime. If you don't have a flash converter you can get a resonably priced conveter at http://www.verticalmoon.com/products/video2swf/video2swf.htm
The only problem with using flash (I currently still use Quicktime) is that you will have to add your movies in post publish. Hope that helps.
Kind Regards,
—Eric
Ash Films
http://web.mac.com/ekashley
G4 Mac OS X (10.4.9)

HT201304 Dear what kind of free program can i get from the Apple on line store and i tunes?

Dear gent.
kindly i would like to get a dvice how can i get the free program either Apple on line store or I tunes?
Best Regards,

There are many free Apps. DO a search for them on the app store.

Please tell me wht Kind of Graphic card can i Use for the Specified Mainboard

1.Product Type:MSI PM8M-V Socket 478 mATX Motherboard MS-7104 v2.X, VIA P4M800 Chipset, Supports Intel P4 CPU, SATA, DDR400
2.CPU Type:Intel P4
3.Memory Type: 184-pin 2.5v DDR SDRAM (am using 1 gb)
4.Power Supply Type:AC
5.Operating System:Windows Xp
6.Problem Description:
i Am A 3d Animator and i wish to install a Additional Graphic Card to my Mainboard.i Wish to add a Nvidia Geforce 8500 GT (256mb) to my Mainboard.i wanted to know if it is compatible with my Mainboard and also will it be plugged in PCI slot or AGP...i Prefer to have a PCI graphic Card and if it is Not den Plzz Let me know about any othe graphics card in same price range dat would support my Pc.
plzz reply fast.....Its urgent

Quote from: BOSSKILLER on 03-September-07, 09:26:20
"so plzz tellll wers the Probs"
In simple words the problems is that your mainboard is too old and don't have PCI-E slot...
Read the replies which you have above 1st..
As mates and MSI Tech as well notified you can't use PCI-E VGAs into your board...
You need a AGP one, here is examples of VGA's that can use:
Ati: (few good choices)
Radeon X1950PRO: http://global.msi.com.tw/index.php?func=proddesc&prod_no=1146&maincat_no=130&cat2_no=137
RX1650PRO-TD512: http://global.msi.com.tw/index.php?func=proddesc&prod_no=1145&maincat_no=130&cat2_no=137
Nvidia: http://global.msi.com.tw/index.php?func=prodpage2&maincat_no=130&cat2_no=136&cat3_no=139
At all you can use any AGP VGA... Just make sure that your PSU is powerfull enough.
hey all frnds thnk for helping me.....can u tell me which card will be the best for my PC........my frnd has a 6200 series...howz it??

What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability. Trying to find which is better.

What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability with this. I am running Lion and Trying to find which is better as I know from experience not all cards are created equal. Thanks in advance for your help!

yakov536 wrote:
High Point RocketU Quad USB 3.0 for Mac is working great for me. Had an issue with CD/DVD Drive which was resolved with most current driver downloaded from the support site.
Running Moutain Lion on Early 2009, mirroring two Seagate Go Flex 2TB USB 3.0 Drives. Installed in Slot 4.
Using it primarily with VMWare Fusion for Virtual Drives. Windows, Unbuntu and other OS running really well.
HPT Support was responsive and very helpfull using the WEB Portal under the product page.
I have some comments and a suggestion:
Have you tried your setup with a SD/CF combo card reader (like the Lexar or Kingston FCR-H63)? Does the card appear on the desktop when first plugged in?
Did you need to fool around with any kind of power issues in installing this card in the x4 PCIe slot of the MacPro?
Suggestion. Have you tried one of the fixed in this article to cure the BT issues in MacPro 3,1?
Good luck.
Henry

HT6006 Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for. Can I get more information on it please. The info in the statement is MHDBQJ1Z3G-0

Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for. Can I get more information on it please. The info in the statement is MHDBQJ1Z3G-0

Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
If it's a charge though your iTunes Store account, it should be reflected in your Purchase History:
http://support.apple.com/kb/HT4098
If the charges are not reflected in the Purchase History, then it's most likely a fraudulent charge to your credit card directly or your credit card number has been stolen and used by someone else in another iTunes Store account rather than an unauthorized purchase through your account. In either case it will be up to your bank to handle.
Regards.

What kind of log I can get with "level informational" - c2950 & 6500

Hello, everybody, It is nice to meet you. I am working in Tokyo in japan as network engineer.
It is my first time to write something on here Cisco Support Community and I don't speak English very well.
So I hope everyone understand my pour question and writing. But I wish somebody anwser to this question.
I am using kiwi sever to manage four of 6500 and about thirty of c2950.
The kiwi server is working normally logging both 6500's syslog and c2950's.
But I have question about difference between 6500's level informational and c2950's.
For example, When I log in 6500 I can get a log from my kiwi server.
And When I enter some command to change config I can also get a log from my kiwi server.
However When it come to c2950 I can't get the logs. I can only get logs that notice 'interface up/down' or 'changed config' stuff like that.
I think I have correct config about logging both 6500 and c2950 as follow.
Trap logging: level informational, OOOOO message lines logged
Logging to XX.XX.XX.XX, OOOOO message lines logged, xml disabled,
filtering disabled
Anybody know what kind of log I can get with "level informational" on c2950.
Thanks everybody.

Information is a fairly low severity which means you'll get everything except debugging messages. This includes link up/down, config change,
CPU hog, etc. If you're not seeing messages other than link up/down and config change, then there may not be anything else happening on the switch which triggers a log message. Check the output of "show log". That should agree with your syslog logs.

What graphic card can i use on my computer

hello i have a compaq presario SR1802FR with A8AE-LE motherboard with 300 w and my processor is AMD Sempron 3000+ 1.8GHz (no overclock) with 512 ram (DDR 1 pc3200 400MHz) and i want to have a new graphic card
can someone suggest a graphic card compatible with my motherborad
(i want graphic card with VGA port not DVA or HDMI)

HI Craoc,
Here is a link to your printer's product specifications.
Here are the sizes and weights of the cards your printer will support.
Paper type Paper size
Index
101.6 x 152 mm (4 x 6 inches)
Index
127 x 203.2 mm (5 x 8 inches)
Here is a link to the Manual for your printer incase you would like to refer to it as well.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

In CS5: what kind of graphic board i need, If I paint it stutter!

In CS5: what kind of graphic board i need, If I paint it stutter!

Without any system information nobody can advise. What operating system? What system specs? What graphics hardware do you use currently? What input device? What settings in Photoshop? We could tell you to buy the latest and greatest card out there, but that might not at all resolve your issue because it#s caused by something else....
Mylenium

What kind of wireless card I need for my Power Mac G5 (late 2005) Dual 2 GH

hi there,
I have for sometime now a "Power Mac G5 (late 2005) Dual 2 GHz PowerPC G5", and recently I have been thinking to get an Airport extreme wireless card with a bluetooth on it, which could work on my machine.
I have already try to deal with apple representatives and Apple sales people to give me a hand on the matter and so far is been a nightmare to approach this guys, tired of wasting time and effort, so that is way I am posting a topic on this section to see if you guys could give a hand on the matter.
All what I would like to know is what kind of wireless card I need for my Power Mac G5 (late 2005) Dual 2 GHz PowerPC G5 (version 10.4.11) and where I could buy one on line to install myself.
This is the mac unit I have.
Dual 2 GHz PowerPC G5.
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 1 MB
Memory: 4.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.2.7f1
Thanks for you time.
regards
Toyko koyko

You're welcome. Funny how Apple works isn't it? If it's any consolation, that Airport/Bluetooth card doesn't show up on the Apple U.S. store either. I don't think they ever intended it to be a user installable part, so perhaps that's why they don't offer it for sale. Do you have any Apple Authorized Service providers in your area? I'd think they'd be able to order the card as a replacement part.
Can you give a little more detail or a link to the gadget you're referring to? It sounds like a USB dongle to enable Wi-Fi, but that must be a third party solution, since I don't believe Apple ever offered something like that.

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

What kind of graphics cards can I get?

Similar Messages

Maybe you are looking for