What kind of information of SIM attached with the device are we able to use on developing application?

What kind of information of SIM attached with the device are we able to use on developing application?
Can we get MSISDN from SIM?
Authentication number???

Hi
XI has two engines that are ABAP engine called ABAP stack and JAVA engine calles JAVA stack.
Some components are executed in ABAP stack and some components are executed in JAVA stack.
ABAP stack -
> Only Integration Engine(IE) and Business Process Engine(BPE) are executed in the ABAP stack
JAVA stack -
> Remaining all(IR, ID, Adapter Engine, RTWB) are executed in the JAVA stack.
More informations about SAP NetWeaver Application Server:
http://help.sap.com/saphelp_nw04s/helpdata/en/84/54953fc405330ee10000000a114084/frameset.htm
More informations about XI components:
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Many thanks
Kiran

Similar Messages

  • What kind of information can I put on the Historical Byte in ATR?

    Hello all,
    Which information can I put on the Historical Byte in ATR?
    I found some information in the GP spec, like basic channel and card recognition data.
    Could you let me know more specifically?
    Thank you very much,
    Julie.

    Normally, historical byte contains information about the life cyle state of the card, i.e. when the card is pre-personalized or personalized, etc.? This is the intent of the historical bytes, but again it is upto the smart card vendor to put the type of the data in it.

  • I am traveling to India, north and south, with my ipad 2, G-3. It is activated by AT and T. How do I use it in India? Do I need to purchase a sim card there and if so what kind? Would they be available in the Delhi airport or where else in central Delhi?

    I am traveling to India, north and south, with my ipad 2, G-3. It is activated by AT and T. How do I use it in India? Do I need to purchase a sim card there and if so what kind? Would they be available in the Delhi airport or where else in central Delhi?

    Also in order not to pay a fortune for the service is it better to acquire if needed a SIM card only once there?
    Check with your carrier about roaming charges.  They are usually prohibitive.  Best to get a local SIM.

  • What kind of log I can get with "level informational" - c2950 & 6500

    Hello, everybody, It is nice to meet you. I am working in Tokyo in japan as network engineer.
    It is my first time to write something on here Cisco Support Community and I don't speak English very well.
    So I hope everyone understand my pour question and writing. But I wish somebody anwser to this question.
    I am using kiwi sever to manage four of 6500 and about thirty of c2950.
    The kiwi server is working normally logging both 6500's syslog and c2950's.
    But I have question about difference between 6500's level informational and c2950's.
    For example, When I log in 6500 I can get a log from my kiwi server.
    And When I enter some command to change config I can also get a log from my kiwi server.
    However When it come to c2950 I can't get the logs. I can only get logs that notice 'interface up/down' or 'changed config' stuff like that.
    I think I have correct config about logging both 6500 and c2950 as follow.
    Trap logging: level informational, OOOOO message lines logged
            Logging to XX.XX.XX.XX, OOOOO message lines logged, xml disabled,
                   filtering disabled
    Anybody know what kind of log I can get with "level informational" on c2950.
    Thanks everybody.

    Information is a fairly low severity which means you'll get everything except debugging messages.  This includes link up/down, config change,
    CPU hog, etc.  If you're not seeing messages other than link up/down and config change, then there may not be anything else happening on the switch which triggers a log message.  Check the output of "show log".  That should agree with your syslog logs.

  • What kind of camcorder can I get with a non Intel Mac

    I am looking to buy my first camcorder and plan to spend about $300.00. After reading the following quote about a Sony camcorder I am a bit concerned, as I do not have an intel mac, I have a iMac G5 Isight -2.1 cpu,2.5GB ram. I have iMovie 08 and Leopard. What kind of camcorder should I get with my set up?
    "I also have new unibody 2008 Mac Book pro OS X - laptop detects camera right away and launching iMovie08, offering video transfer. If you have older, non Intel Processor Mac - forget about this camera - and ALL OTHER's AVCHD/H.264 camcorders - most likely they will not be working for you. So, please, do not write negative reviews, do not confuse people, OK? "

    [email protected] wrote:
    ... about $300... I have a iMac G5 Isight ... iMovie 08 and Leopard. What ... camcorder ...?
    Something like this should work: http://tinyurl.com/ycy4rnu
    Although list price is only about $200, with the extra battery(s?), Firewire cable, camcorder case, blank media, etc., that you will need if you do not already have them, $300 is not far off.
    You can also consider other Firewire connected camcorders that are compatible with your Mac and OS.
    Before I buy, I like to download the user guide for the camera I am considering and review it to be sure it does what I want. Regardless of which camcorder you are considering, if you cannot find the information about system compatibility in the camcorder's documentation, the retailer can help you find the information you need.
    As shown in iLife System requirements, iMovie 8 can work with your Mac and a compatible camcorder:
      http://support.apple.com/kb/HT1010
    Note that AVCHD and 24-bit recording have requirements beyond those stated in your system info.
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • I'm trying to make a purchase and I get a message that the information does not match with the bank. What can I do?

    I'm trying to make a purchase and I get a message that the information does not match with the bank. What can I do?

    Go to the APP store or Itunes. On the bottom of the mainpage, tap your apple id, view account. Then you can edit the payment information. Or you can do it(if you encounter a problem there) on Itunes on computer. Just go to the store, select your name and edit information. Make sure everything matches...exp date, name as appears on card etc..

  • BBPCO what kind of information will post to R/3

    Hi all,
    I doc BBPCO - for commitment posting , this i doc what kind of information send it to R/3
    Thanks and regards
    Harish

    Hello Harish,
    The BBPCO is useful for standalone scenario where no PO is created in the backend thus no commitment without this message type. In other scenarios, we don't need BBPCO.
    PO will be created by BAPI & commitments will be posted similar to a manual PO in backend.
    See more details on thread
    BBPCO IDoc not being generated
    Hope this helps.
    Thanks
    Ashutosh

  • Laptop HP DV6-2088dx - what kind of dock station will work with it?

    what kind of dock station will work with it?

    Hi John,
    Please find answer below
    1 -- What are the specs of a laptop that can handle CS 6?
    It depends on the application you will use and install. Video apps like Premiere pro, After effects have higher requirement as compare to InDesign, Illustrator etc. Please review the tech specs for each application. This link will help with the details :System requirements | Adobe Creative Suite 6
    2 -- Can I sign up for Creative Cloud services for, say, a couple months and then suspend the service when I'm back to using my desktop? What's the pricing for that?
    Yes, you can, You can find the pricing details creative.adobe.com/plans
    3 -- Can I use Creative Cloud when I don't have access to Internet because internet service is sporadic or non-existent in northwoods?
    No, you can't. You need internet atleast once to activate the software.
    4 -- Can I easily transfer projects from CS 6 laptop to CS 5.5 on desktop?
    It depends on file format. File format like JPEG, PSD, TIFF etc are universal and shall work perfectly fine between CS6 and CS5.5 however format like INDD will be a concern as InDesign file saved in newer version could not be opened in older version directly.
    5 --  Alternatively, can I simply install my existing CS 5.5 in a new laptop?
    Yes, you can.
    Hope this helps
    - Manish

  • Every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

    every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?

    Hello SeamusFitz,
    Thank you for using Apple Support Communities!
    In order to get your messages to show up on your other phone, you would need to have a backup of the phone with the messages, and then restore the new phone from that backup.
    According to article iTunes: About iOS backups found here http://support.apple.com/kb/HT4946 iTunes will backup your Messages.
    iTunes will back up the following information
    Messages (iMessage and carrier SMS or MMS pictures and videos).
    This will help you backup and restore your device:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

  • Every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this?

    every time I swap between my SIM cards with the iPhone all the messages that we're sent whenever the SIM card was not in my phone never show! is there anyway I can stop this and still get the massages?
    [email protected]
    cheers

    Hello SeamusFitz,
    Thank you for using Apple Support Communities!
    In order to get your messages to show up on your other phone, you would need to have a backup of the phone with the messages, and then restore the new phone from that backup.
    According to article iTunes: About iOS backups found here http://support.apple.com/kb/HT4946 iTunes will backup your Messages.
    iTunes will back up the following information
    Messages (iMessage and carrier SMS or MMS pictures and videos).
    This will help you backup and restore your device:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    All the very best,
    Sterling

  • What HDMI to Component converter will work with the current generation Apple TV3?

    What HDMI to Component converter will work with the current generation Apple TV3?

    http://www.hdfury.com/products/hdfuryiii-specs/

  • What earlier version of FCP will work with the intel-3processor?

    what earlier version of FCP will work with the intel-3 processor?

    The version of the CR designer that the reports were created in is really not that important. Though more on that below. What you need is Crystal Reports XI R2A (11.5.x). That is the last version of CR to ship the Report Designer Component  (RDC) that you are presumably using at this time. Note that this version is out of support thus no fixes, no phone support, though we welcome your queries on these forums. To obtain CR XI R2A you will have to contact sales; 866-681-3435. Do not get CR 2008 (12.x) as this version does not ship the RDC and only has the SDK for .NET and Java.
    Re. version of the reports. While the version of the designer the reports were created in should not be that important, the older the designer, the more potential problems you may run into. Updating the reports to CR XI R2A is highly advised. You can do this manually by simply opening the reports in the designer and saving them - making sure they still run once that is done. Alternatively, you can do this in code by simply using the .SaveAs method, or exporting to rpt file format. This may not however update the database connectivity correctly (the database engine was completely rewritten in CR 9) and testing will be needed to make sure these reports still work. This is particularly true of your version 8 reports. Version 9 reports and later should be OK.
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Can I use the iPone 3gs SIM Card with the iPad 2?

    Can I use the iPone 3gs SIM Card with the iPad 2

    The iPhone 3GS uses a full size SIM card.
    The iPad uses a micro-SIM card.

  • HT1926 I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

    I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

    Thanks for the reply. I went back to check if there was a history in windows (Event Viewer) but could not locate it in Win7. The only updates that were in the Apple Updater window were the Quicktime and ITunes. Had I let the Realplayer continue on its own, it would have installed the Google Chrome and other apps. I let it finish installing and then removed the entire program. I do not remember checking or seeing anything saying that realplayer was being downloaded until after a reboot was requested from the ITunes Update Installer.
    I just thought it was strange since I do not use Realplayer and have not downloaded any software for it.
    I am on a corporate PC with a pretty thick firewall, but something may have slipped through.
    Thanks again for the assistance.

  • I just lost all recent updates to my iCal from the last days. Can this possibly happen ??? What can I do to restore iCal with the most recent updates?

    Hello All, yesterday afternoon I just lost all recent updates to my iCal from the last days. How can this possibly happen ??? It may have occured after I chose the Refresh function after I had problems searching my iCal for a particular event. I think my iPhone was also not properly synched in the morning but I didn't pay it much attention and opened iCal on my MacBookAir instead.
    How can I prevent this from happening again?
    What can I do to restore iCal with the most recent updates?

    Random glitch.  It doesn't matter; if you didn't backup the data, then you can't recover the data.
    In the future, for any 'important' data, back up that data regularly.  Forward the 'important' text messages to your email.  Trasnfer your photos & videos to your computer, etcetera.

Maybe you are looking for

  • Error: xulrunner version 1.9.2.1o not compatible with firefox 3.6.12 min/maxVersion 1.9.2.12

    Loaded firefox 3.6.12 from scratch. It won't start, popping up an XULRunner dialog box that says :Error: Platform version '1.9.2.10' is not compatible with minVersion >= 1.9.2.12 maxVersion <= 1.9.2.12. How do I get proper version of XULRunner so Fir

  • Safari 5.0.5 jquery images do not show or show incorrectly.

    When they do show the size a crop are not correct. I can not duplicate this issue on other macs, only my MacBook Pro. Chrome, FireFox are good.

  • EA3:  Unable to See the contents in Materialized Views

    I have been using sql developer 1.2.1. I exported my connections as an xml and imported it in EA3 Version 1.5.0.53. In Version 1.2.1, I am able to see the tables under Materialized Views, but in EA3, If I click on the folder which says "Materialized

  • Pass muti parameters

    I have a problem when using web.show_document to open a form and pass multi parameters, here is my code: web.show_document('/forms90/f90servlet?form=FORM1.fmx&userid=USER1/USER1@TEST&buffer_records=NO&debug_messages=NO&array=YES&query_only=NO&quiet=N

  • Creating flash video pages

    Everything I read says how easy it is to insert flash video with cs4.. just a few clicks and presto! So why cant I get it to work? I have read tutorials until my eyes are bleeding and the best I can get is a transparent flash player with no content..