What kind of inforobject can be used for compounding while creating charac

Hi all :
     what kind of standard inforobject can be used for compounding while creating characteristic ?
    I found that some could be , but some couldn't , like 0RESP_PERS.
THE ERROR :
1      Characteristic 0RESP_PERS was included in the compounding for COS09 (-> Long Text)      QLong text exists
2              0RESP_PERS is just an attribute and is not allowed in the compounding No long text exists
0RESP_PERS is an object, why can't be used for compouning?
Could you please tell me why ?
   Thank you very much!
Edited by: jingying Sony on May 10, 2009 7:05 AM

Hi Jingying Sony,
One can mark an infoobject as an Attribute Only in the General tab.
This means that the infoobject will only act as an attribute and cannot be used as a characteristic in infocubes. Neither can it be used as a navigational attribute and I guess it may not be available for compounding then(since in compounding - it implicitly becomes a characteristic).
For your ref
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
If you uncheck this checkbox, then may be it will allow you to compound this characteristic..
You may try with a (self created) ZRESP_PERS reference chararacteristic of 0RESP_PERS, to confirm this.
One more link for your reference
http://jgtang82.javaeye.com/blog/191795
Hope this helps,
Best regards,
Sunmit.

Similar Messages

What kind of camera can I use??????

I need to measure crack length in fatigue test of an Aluminium sample automatically. For example, the camera can take shots (Images) every 4000 cycles (fatigue load cycles), maybe more cycles.
For my test, I need to measure both sides crack length (right side and left side of specimen centre line), shown in Fig1. So I need to take shots both crack tips at the same time, which means camera must have a large field view and the resolution should measure 0.01mm, to see both crack tips clearly. At the end, I must be able to acquire images from Labview. I can save all the images into my fold from Labview, then I can measure crack lengths in left and right side from every image. Fig1. sample size and crack tip
Would you please give me any suggestions on the characteristic/specifications of this kind of camera?
What kind of camera can I use? How much this kind of camera? Where can I order this kind of camera?
Attachments:
camera-Fig13.jpg ‏16 KB

Hi Cran.
You might want to put this topic into the Hardware Forum instead.
It seems that this isn't much of a LabView question......
Regards BCL
Don't forget to rate a good Answer....
Here should be some cool signature
But there's NOT
LV7Express, LV8.5.1

What kind of cable can I use?

Hello,
I recently bought an iMac and I was wondering what kind of cable can I use to connect it to my Macbook Air so that I'll be able to transfer my files faster.
Any links to a website that has a picture or actually sells the appropriate cable would be greatly appreciated as I currently live Paris and communicating with store clerks is a mission in and of itself!
Thanks a lot.

get the usb-ethernet adapter for the MBA and then an ethernet cable to attach the two computers. OR: create a computer to computer wireless airport connection so that the computers can access the N wireless network both are capable of but some routers are not. If the MBA is the more recent revision, you may have gotten the usb-ethernet adapter included in the package; otherwise, it can be purchased from the Apple Store. The ethernet cables are standard and can be obtained from any computer store. No need for anything special like crossover cables, macs connect directly with a standard cable.
I tried to transfer files quickly via a simple 802.11g wireless LAN I had set up via a router but it was so slow that I set up the c to c network via the menubar airport menu and was able to quickly copy and transfer files via the 802.11n that the airport hardware provides when something else does not interfere with the speed that the macs are capable of wirelessly.
Message was edited by: Rhyd
Message was edited by: Rhyd

What brands and type can I use for my iMac 20" internal Hard Drive?

what brands and type can I use for my iMac 20" aluminium internal Hard Drive?
can I use WD caviar black?
is it too hot?

If you are replacing the drive because the existing one is faulty, that's one thing. If you just want more space, you should take advantage of having a decently fast and relatively small capacity drive in there now (instead of a huge drive). Get an external FireWire drive and off-load most of your user data there. Make your internal drive dedicated to mostly your OS and app files, with plenty of free space. That setup will make your iMac run more efficiently. I won't go into more detail, because I'm not answered your specific question... You can post back with any questions, if interested...
To answer your questions...
You should be able to use any SATA 3.5-inch drive internally, but you should probably keep it at or under 1TB. The main concerns are power usage and heat dissipation. A drive like the WD Caviar Green would be ideal in terms of power and heat, but they do have slower (or variable) spin rate. I have one as an external drive (750GB) and it is amazingly quiet and cool. If I had to replace the internal drive because the current drive failed, I'd put it inside. I'll trade a bit of pure performance for the efficiency (including low noise), and these drives are more advanced with higher data density and larger cache, so the trade-off from slower spin rate may not be so bad.
You can check your current drive's model number (which is shown in System Profiler) to get the specs online. The stock drive in my old +Late 2006+ iMac is a 7200 RPM drive. The Caviar Black is a 7200 RPM drive, with a newer design. So if you want to use a Caviar Black in there, I think it would be OK.

What kind of convertor can I use with my I mac in Israel?

What kind of convertor can I use with my I Mac in Israel?

What do you want to convert? More details about what you are trying to do would help.

What kind of storage we should use for oracle database?

Hi
thank you for reading my post
Can some one please explain what kind of hardware storage is common for oracle database, and kindly please provide some explanations about the reason that we can use such storage?

Perhaps you're thinking about RAID, an acronym for Redundant Array of Inexpensive Disks? That's not specific to Oracle by any means, it's a very common way of setting up multiple disks in a server so that the failure of one or two disks doesn't cause the system to lose any data. If you're dealing with a server of any size or any sort of SAN or NAS device, it is going to use RAID, the question is which form of RAID (there are different sorts of configurations with different levels of cost, performance, and durability).
Justin
orafad was a faster typist than I.
Message was edited by:
Justin Cave

What kind of analysis should i use for these signals?

i'm developing a lie detection system,i have one respiratory sensor and a hand grip heart rate monitor to acuire the physiological signals from the sensors.i have attached a screenshot of the application.the top signal represents the heart beat and bottom one is respiratory signals.my question is that what analysis mwthods should i be using for these signal types?would you please care to help me on this? thank you.

Thanks for your replies to this topic. I just discovered the worm gear option yesterday while talking to a professor. I think that is the route we are going to take because the DC motor won't be as expensive as a high-torque stepper or servo. Also, I have three engineers that will be calculating the motor size based on gear reduction, spool size, cable length, and the load that we have to lift (which is about 120 lbs.). If any of you would like to suggest a motor size, that would be great too. I'm thinking something around 1HP should probably do it. My goal is to stay cost-effective while making an easy apparatus. I know that the worm gears may also be inefficient at times but it seems like the best solution for this application. Not to mention it's not to hard for our mechanical engineers here to make the spool and bearings. And I believe you can buy a DC motor that interfaces directly with a worm gear. However, a follow up question is what computer hardware do I need to control the voltage of the motor so I have speed control? Is this done through an RS232 board? My output from the LabVIEW program will be voltages, from which device is that binary signal converted into physical voltage? Thanks for your help so far.

What kind of videos can I use?

I had a question, what kind of videos can i upload onto a new nano?
See, I have a DVD of my family reunion, someone video taped it and put it on DVD. Is it legal to use that DVD?
And I was wonering...if so, how do i get it onto the ipod? I have never used an ipod with video...so the itunes part is completely new to me.
Just to tell you though, my XP does not play dvds....any suggestions?

Whats t&c?
Anyway in most contries your aloud to make backups of your DVD and rip them to watch on your iPod.
Programms which do that include Handbrake and VisualHub.
But if its a DVD you burned yourself, you should be able to convert the files on the DVD with either Quicktime or iSquint without any of the other programms.
iSquint is great much faster than Quicktime and free.

What kind of printers can I use with mountain lion?

i have a MacBook Pro
OSX 10.8.5
what brand of Printers can I use, compatible with Apple Computers with OSX 10.8.5

Welcome to Apple Support Communities
Most printers are compatible with Mac OS X. You can find the list of all printers supported in this website > http://support.apple.com/kb/HT3669
Main brands like HP, Epson or Canon sell Mac-supported printers, or you can have a look at the Apple Online Store > http://store.apple.com/us/mac/mac-accessories/printers

What kind of Soundblaster can be used in a PCI64/32 Slot of a Server ?

What kind of Soundblaster Card?can be used in a PCI64/33 Slot of a Server ?
can anybody help? me ?
Thanks and Sorry for my English ;o)

X-FI PCI 32Bit Cards?with 33MHz will fit into a PCi 64Bit slot. (The Slots must only support PCI 2.2 or later.)?Even a PCI-X slot can dri've PCI 32 33MHz cards. Downside: the PCI bridge will clock down all connectet PCI slots to 33MHz. Most PCI 64Bit slots supports 66MHz clock speed.
Older PCI cards like Audigy will run in a 2. or lower?compatible PCI Slot.
Message Edited by fffcmad on 03-26-2008 0:3 PM

HT5299 What kind of cable should I use for movies on my macbook pro if I want to watch it on my 60 inch tv?

What kind of cable for my macbook pro, do I use to watch movies on my 60 inch tv ?

Which model MacBook Pro do you have (e.g., "15-inch Late 2011")?
Clinton

What kind of database driver should use for database adapter in BPEL?

what kind of database driver (XA or non-XA) should use for database adapter in BPEL? I have only one database adapter and no JMS.
Thanks
Jo
Edited by: 799095 on Sep 30, 2010 8:35 AM

Hi
It depends on wheter you need XA transaction or not.
See http://www.theserverside.com/discussions/thread.tss?thread_id=21385 third reply.
If you only have one database and no synchronous dependency to the caller, non-XA should be OK.
-Johan

What kind of media can I use?

I see that my MBP has a 4x Superdrive. I've never had a DVD burner before, so I don't know much about them. What sort of DVD media can I use in this drive?
Is there any functional difference between DVD+R and DVD-R? When should I choose one over the other?
When burning video, will the RW media work in the average DVD player? Aside from cost, is there any drawback to using RW media?
I assume that a higher speed disc (like the 8x and 16x media out there) will just burn at the lower 4x speed. Does the same idea hold true for dual-layer media?
There are some awfully cheap media packs on pricewatch.com. Has anyone had good/bad luck with inexpensive generic media?

Evolutionradio is quite correct. The Superdrive will burn a variety of media, but dvd players can be temperamental, so you want media that burns well but also plays on a range of players.
I've used. TDK, Verbatim and Sony media dvd + and dvd - with success. You can get media rated higher than 4x - e.g. the verbatim media I use is 16x.
I've found it pays to shop around for media. Circuit city are quite good, sometimes Best Buy will have a deal when Circuit City don't. I tend to find 50 dvds for around $17 if I look hard when the normal price is around $40. Look online as well as sometimes the stores have a deal online which you can order and pick up, look at the cost per disc - lastly Froogle is useful too - type something like dvd 25 pack or 50 pack and see who has the best price. Currently Best Buy have 100 Fuji dvd discs for $30 which is great value, not tried it though so you might want to buy a single as well to test.
Best of luck

What kind of database can I use with jsp pages?

Well I have been an ASP programer for a while and now I want to be able to host sites on an Apache server so that means i need to just jsp pages or something that is not windows dependant. So I need to start a database, a small one just for client information, and I don't know what to create it in. I was going to use MS acess but I am guessing that won't work with jsp. So what are my options for desktop database applications? Should I download star office and try that I havne't ever used that but I imagine it comes with some kind of database program. Well let me know thanks.

JSP should work with any database that worked with ASP. The key is to use JDBC which is the equivalent to ADO. As long as you get the appropriate driver for the database, you're all set. As the previous poster mentioned, for MS Access you must use a JDBC-ODBC bridge which is really a JDBC driver that works on top of ODBC. This is the worst performing type of driver, but if you're using MS Access then perhaps performance isn't a priority.
Check out the Sun tutorial on JDBC if interested.

What kind of virus protection to use for

wondering what kind of virus protection would be able to use although that the I'Macs has Melware and also what kind of security system would go good with a time capsule?
thanks
Richard Descoteaux Jr.

Regarding the anti-virus software, see my Mac Malware Guide.
As for the security system for a Time Capsule, what kind of security system are you referring to? If you want your backups to be encrypted, see:
http://pondini.org/TM/31.html
If that's not it, you'll need to be more specific.

What kind of inforobject can be used for compounding while creating charac

Similar Messages

Maybe you are looking for