What kind of "PCI to PCMCIA" adaptor do I need?

I have been logging data from analytical balances to a laptop running LabVIEW through a "4 port PCMCIA RS-232 Interface board". I would like to know if I can still use this card in a normal desktop PC by a "16-bit PCMCIA-PCI adaptor". Thanks.

There are "PCI to PCMCIA" PCI cards, but I personally would just get a 4 port PCI RS-232 card. Your application won't know the difference and you won't have to worry about incompatibilities between the PCI card and the PCMCIA card.
If you do decide to go with the adapter, just google PCMCIA to PCI adapter and you'll get plenty of results.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

  • What kind of PCI Device is the NI-PCI 6519 card?

    Hi:
    I need to know what kind of PCI device is the NI-PCI 6519, according to the definition that appear on the link: http://www.microsoft.com/whdc/system/bus/PCI/pcibridge.mspx, under the title "Types of PCI Devices and PCI-to-PCI Bridges".
    Is the NI-PCI 6519:
    1.- a PCI-to-PCI docking bridge type?
    2.- a reset-resistant SID PCI device type?
    3.- a reset-loading SID PCI device type?
    4.- a non-reset resistant SID PCI device type? or
    5.- a multifunction PCI device type?
    I need to know this because I have a problem with the PCI-to-PCI Bridge of my motherboard on the Power Management issue and it affects directly the PCI bus configuration of my system.
    If someone knows the answer or knows somebody who knows the answer I'll appreciate very much his/her help; or maybe he/she could send me the contact to somebody.
    Thanks in advance!

    Ignacio,
    The PCI-6519 is fully compliant to the PCI-2.2 specification which means that it requires the 3.3 V rail from the PCI bus.  The 6519 must be installed into a slot that provides 3.3 V. Check that the 3.3 V LED located on the top right of the 6519 device is lit. If not, check that the PC motherboard provides 3.3 V to the PCI bus. I also believe that it should be a reset-resistant or reset-loading device, but if you feel that the board is not working correctly with your pci-to-pci bridge, I would recommend that you contact NI support directly.
    Regards,
    Erin Bray
    NI Mexico
    www.ni.com/soporte

  • What kind of PCI slots do I have?

    Can anyone tell me an easy way to check and see what kind of PCI or PCIX slots I have on my system without opening it up?
    I have a dual processor 2.0, the one that came with four Ram slots and an ATI Radeo 9650.
    Thanks!

    If you check this label it will show which type of slots you have
    http://docs.info.apple.com/article.html?artnum=86418
    If you need to know the speeds, the specs are here
    http://support.apple.com/specs/powermac/
    and here
    http://www.everymac.com/systems/apple/powermac_g5/index.html

  • What kind of virus and malware protection do I need for my new iMac?

    I am new to Apple computers, what virus or malware protection do I need?

    Agreed, please read Thomas's guide!
    As a general rule of thumb though, no additional software is needed for malware or virus protection.  Apple computers are incredibly secure, the best protection is running Software Update often and not downloading from illegal software from torrent sites. Other than that, OS X is incredibly secure and best left alone to run well. 

  • I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT?

    I have one HDMI port on my television that is currently used for my hard drive/free view box.  What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT? Is it a switch or a splitter?  And where is it best to buy one?  Thanks!

    Welcome to the Apple Community.
    You need an HDMI switch.

  • What kind of VGA adaptor do I use with my ibook G4?, What kind of VGA adaptor do I use with my ibook G4?

    I bought a VGA adaptor wire for my Mac ibook G4, but it doesn't fit my port.  What kind of VGA adaptor do I use?

    Hi, and welcome to Apple Support Community.
    You need the Apple VGA Display Adapter. This is for video-out to an external display. It will not get you the audio.
    If you want video out to a TV, it will require a different adapter.
    https://discussions.apple.com/docs/DOC-1908

  • HT1338 What kind of cord do I buy to hook up my MacPro to my television monitor? And where does it plug in?

    What kind of cord do I buy to hook up my MacPro to my television monitor? And where does it plug in?

    Thanks, Matt. I have a laptop, so it looks like I need a mini-DP to HDMI adaptor that supports sound and a plain HDMI cable. Do I have that right???
    ER
    P.S. You're corresponding w an idiot writer here who only uses word processing, but it is SOOO much easier to do the few things I need to do on the Internet w my MAC. I was told over and over by other writersit would be better, and they were right. (Although there are a few issues for writers with the MAC.)

  • Has anyone gotten the FBUS PCMCIA card to work on a PCI to PCMCIA adapter board?

    I have lots of success with the PCMCIA card in laptop PCMCIA slots, but no luck with the PCMCIA card in a desktop PC with a Quatech PCD-B/PCI-E PCI adapter for PCMCIA boards.  I am thinking that my problem resides with the adapter board but I would like to know if anyone has had success with the FBUS series 2 PCMCIA card with a PCI to PCMCIA adapter.  I got a WinXP SP2 IBM ThinkCentre desktop.  Thanks

    We have ever used some PCMCIA to PCI adaptors, they are working properly with NI PCMCIA-FBUS card as well as NI-FBUS software.
    I'd like to recommend the single CardBus PCMCIA slot adaptor from Elan Digital System:
    http://www.elandigitalsystems.com/adapter/pci.php
    We have used the adaptor in a Dell Dimension desktop, running XP SP2, and NI-FBUS Configurator 3.1.1 runs well.
    Another adaptor is a long card, which is Gigabyte GA-MPCI, it works well with some old desktops, but the length of the card is about twice of the card of Elan Digital System; it might not fit your requirement.
    Hope it helps.

  • PCI vs PCMCIA?

    Hi,
    sorry for the neewbie question: is PCI and PCMCIA the same thing? I want to connect the Belkin 802.11g F5D7000 PCI in the Pismo slot? will work without problems or I need some sort of adapter? I have these options for going WiFi, What card do you recommend for the Pismo?
    a) Belkin F5D7000
    b) Aztech WL830PC
    c) D-Link AIR DWL-650
    Thanks in advance..
    PS: English isn't my first language, sorry...

    imactor,
    You have several ways to add WiFi to your Pismo, but these are the most convenient:
    1. Buy a WiFi CardBus PC card for the PCMCIA/CardBus slot on the left side of the Pismo. As Tom stated, PCI cards are for desktop computers.
    2. Buy the original Apple AirPort card that fits in a slot under the keyboard. You can only find these used (not new) and are limited to 802.11b 11Mbps speeds; no other card will work in this slot.
    Here is what the card looks like:
    http://eshop.macsales.com/item/Apple/M7600LLE/
    Here is how it is installed:
    http://docs.info.apple.com/article.html?artnum=50028
    Now if you decide to buy a CardBus PC card, these are the things to consider:
    - WiFi PC cards use a variety of wireless chipsets but only one chipset is compatible with Apple's onboard AirPort software and these cards use the "Broadcom" chipset. In addition, you must be running at least OSX 10.2.6 or newer and AirPort 3.1.1 or newer. There are not very many of these cards available but if you go to the link below, you may find one of these cards new or used in your part of the world:
    http://bcm-specs.sipsolutions.net/Chipsets
    - Or, you can use a third-party wireless driver like Orangeware's Wireless Driver for Mac. It supports PC cards that use the Atheros chipset and they have a very long list of cards which will work.
    http://www.orangeware.com/endusers/wirelessformac.html
    The Aztech WL830PC you listed will work with the Orangeware driver; as far as I know, the other cards have no drivers for the Mac.

  • What kind of adapter is needed when traveling to Europe?

    I'm traveling to Russia and will need to recharge my iPod once I get there. What kind of adapter/connector will I need? I have the 80GB.

    You may try this:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=E9E 41A4A&nplm=M8794G/B
    If you want to know what adaptors are suitable for Russian sockets I can send you picture of mine. Just give me your e-mail.

  • What kind of psl-card for firewire?? please help!!

    I have an HP Pavilion p6-serie 2400NL with Windows 7 64-bits
    Now I want to import from my Canon MV730i dv-video-camera but... there is no connection for the firewire-cable.
    I an told I have to connect a psl-card ???
    What kind of card do I have to buy and where???
    who can help me please???

    Hi,
    You need a PCIe - Firewire card, something simila to one of the following cards:
       https://www.google.com.au/search?q=PCIe+-+Firewire+card&hl=en&rlz=1G1GGLQ_ENAU282&source=univ&tbm=sh...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What kind of Soundblaster can be used in a PCI64/32 Slot of a Server ?

    What kind of Soundblaster Card?can be used in a PCI64/33 Slot of a Server ?
    can anybody help? me ?
    Thanks and Sorry for my English ;o)

    X-FI PCI 32Bit Cards?with 33MHz will fit into a PCi 64Bit slot. (The Slots must only support PCI 2.2 or later.)?Even a PCI-X slot can dri've PCI 32 33MHz cards. Downside: the PCI bridge will clock down all connectet PCI slots to 33MHz. Most PCI 64Bit slots supports 66MHz clock speed.
    Older PCI cards like Audigy will run in a 2. or lower?compatible PCI Slot.
    Message Edited by fffcmad on 03-26-2008 0:3 PM

  • WHAT KIND OF FILES CAN YOU EDIT IN IMOVIE!

    WHAT KIND OF FILES CAN YOU EDIT IN IMOVIE!

    The PCMCIA digital TV tuner card I have is the Formac Watchandgo which I purchased here for the equivalent of around US$50:
    http://www.formac.com/webapp/productsavwatchandgo.php
    However, it is only usable in countries which use the PAL TV system (such as Europe and here in Australia).
    I’m not familiar with the American NTSC TV system, or what TV tuners might be available. You will probably find most tuners are USB these days.

  • What kind of monitor is recommended for the new Mac Pro?

    I want ot upgrade to the new Mac Pro from an imac, but what kind of display/monitor would be recommended and how much might it cost?

    There are lots of 27"-30" monitors that would work, with the right connector adaptor.  Many sell for around a 1/3rd of an Apple display.  Personally, I like Samsung monitors, but LG makes some very nice ones, and even Dell's monitors are often quite good.  Acer has some nice large screen monitors out too, and while the name might not be commonly known to many people, they are and have been a major equipment manufacturer for decades now and their quality is usually pretty good.
    Keep an eye out for sales in the coming weeks and go look at some, preferably side by side.
    You should be able to pick up something good in the 25"-30" range for easily under $500/$600 USD (on sale, perhaps well under $300).

  • Have DVI monitor - want to add VGA monitor - what adaptor am I needing?

    Well, Ii am at my office - not at home where my PowerMac is and I am wondering what adaptor I need to purchase in order to connect a second monitor to my G5?
    I am already using my DVI port for my 19" monitor.
    Surprise! When I tried to use my DVI - VGA adaptor (reaching behind desk scenario) it wouldn't work and I quickly realized, "Hey! That's not a DVI port :-|"
    What kind of port is it and where is the best place to get the adaptor?
    Thanks guys

    I don't think there are many companies making these, but there is no reason another brand shouldn't work. If you can't find an ADC to VGA adapter, you could buy an ADC to DVI adapter
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/2.RSLID?mco= E1A673E1&nplm=T2774G%2FA> to connect your DVI monitor to the ADC port, and use your DVI to VGA adapter to connect your VGA monitor to the DVI port. Don't try an ADC to DVI followed by a DVI to VGA to connect the VGA monitor to the ADC port. ADC to DVI adapters may not pass through the analog signals needed by a VGA display.

Maybe you are looking for

  • Background Job: SWEQSRV - system_cancelled

    Hello gurus. We are on ECC6 and recently upgraded our system to Unicode. Now there are irregular dumps in ST22 with information of the background job (SWEQSRV) being cancelled by the system. "SYSTEM_CANCELLED". Error analysis     The current program

  • How to use __createdAt in a query

    Hi In Objective C, I'm trying to query a table and get all entities with __createdAt later than someDate. I tried the following code: NSPredicate *predicate = [NSPredicate predicateWithFormat:@"__createdAt > %@", somdeDate]; MSQuery *query = [aTable 

  • Every time I save a file it creates a new folder

    Hi, weird problem, never occurred on other Macs. I have a preso and every time I save it I see an Expander application running which creates a new folder file. Let's say I have a preso called Effects.key, when I save it or in auto-save it creates Eff

  • I cant log into youtube or ebay paypal

    Everytime I try and sign into YouTube or to pay through ebay on Paypal, the page tries to load and then it says: Problem loading page The connection to www.google.com was interrupted while the page was loading. # The site could be temporarily unavail

  • Strange behavior of listener

    I am running to databases on my oracle 8.1.7. For one of the database say A the behavior of listener is normal,but for the other say B its behavior is very strange. i am using the same listener for both the database , can that be reason of problem ?