What Kind of RAM i need for a 20" 2.16ghz iMac (white).........(MA589E/A)

Hi guys....
Well i have a 20" 2.16ghz iMac (white) the code is MA589E/A.
and now i need more RAM so i want to buy some RAM,, i have a few questions...
1) What's the Maximum ammount for this model?
2) What kind of RAM i need (please be specific).

Hi Alvi
Your Late 2006 iMac supports 3GB of PC2-5300 667MHz ram, see the Memory Specifications in the link below:
http://docs.info.apple.com/article.html?artnum=304284
Also here are the Technical Spec's for your iMac:
http://support.apple.com/specs/imac/iMacLate2006.html
Dennis

Similar Messages

  • What kind of RAM I need for my Satellite A135-S4527?

    I have a Toshiba Satellite A135-S4527. It came with 1GB RAM (DDR2 SDRAM). I'd like to upgrade it to 2... Just wondering if anyone knows what kind/brand of RAM is installed from the factory, and if it's installed as 2x512 or 1x1024.
    Thanks.

    The specification of your notebook model is not known to me but if you want to upgrade RAM check please this Kingston page .
    Bye

  • What kind of document i need for register  iOS Developer Enterprise Program ?

    What kind of document i need for register  iOS Developer Enterprise Program ?

    Wond,
    I have full access(SAP_ALL) on BI. What kind of Authorization on R/3 system to extract the data?
    Thanks,

  • What kind of cert is needed for Client to MP/DP communication.

    Hi, 
    What kind of Certificate is needed for Client to DP/MP communication?   I know what the documentation says about setting up a Client cert and setting up auto enroll however, we are not able to setup auto enroll in a couple domains so we are trying
    to figure out how to get certs on these other machines.
    Will any cert listed in the personal store of the Client and the MP/DP work? 
    How does Config Manager pick the cert it needs to use for this on the CLient side and MP side?
    Thanks in advance.
    Thanks Lance

    We manually created a cert for a machine using the Config Manager Client template.   THis was the same template used to create the config manager client cert that we installed on the site system.
    So both the Config Manager server and Client have a cert created with this template (and therefore show the same template id).
    The client and config manager server have root certificate in the trusted root store from the same CA.
    in our ccmmessaging.log file on the client we get the following error.
    Certificate [Thumbprint ksdjfskfjdsfksjfskdfjskdjfskjfskdjfklsjdfslkfjdslkf] issued to 'machinename' doesn't have private key or caller doesn't have access to private key.
    in the certificates MMC it shows for the certificate with the above thumbprint..
    you have a private key that corresponds to this certificate.
    What are we missing?
    Thanks Lance

  • I need to know what kind of disk i need for my portege z835-sp3240L

    I have an Portege z835-sp3240L Ultrabook and the SSD disk failed, so i need to replace it. I want to know what kind of disk i need (size, inches, etc) Please, can you give all the info about the disk. I live in Chile, so i can´t take it to a Toshiba repair place.

    Portege Z835-SP3240L
    Downloads here.
    Essentially any capacity SATA disk that fits a laptop should do.
    Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
    If you failed to create recovery media, you can obtain it from Toshiba. Scroll down to Get Recovery Media here. Toshiba in the US will ship to Chile (see this message).
    For instructions, see the section Restoring from recovery media, which begins on p. 65 of the User's Guide.
       Portégé Z830 Series User’s Guide
    If the disk uses advanced-format technology, see my message about that.
    -Jerry

  • What Kind of microcontroller is needed for alarm system with PIR sensors

    Hi ! I'm student at Technical University Varna , 
    Bulgaria . I'm interessted to create my own alarm system with Labview,
    but I'm not sure what kind of controller i need and what kind of PIR
    sensors.                  Thank You

    Hi xellos,
    I'm not sure what you need, but if my feelings is right, than what you  want to do is sort of motion detector based on PIR sensor and some ucontroller. It this is what you need, than once again, such a question is rather suitable for other discussion forums, like LabVIEW Embedded.
    However, in general you can go for ARM or Blackfin when thinking about embedded platform. See following links to get more ingormation on ARM and Blackfin with LabVIEW:
    NI LabVIEW Embedded Module for ARM Microcontrollers
    NI LabVIEW Embedded Module for ADI Blackfin Processors Development Kit
    With choosing sensor, I suggest simple googling - with relativly little effort you can find many sensors. And you can pick on specification and requirements you have (just to note, National Instruments is not producing and usualy not selling sensors).
    Regards,
    Stefo

  • What kind of adapter i need to transfer file from an imac hardrive tiger to an imac leopard

    what kind or brand of usb adapter i need to transfer file from an imac hardrive tiger to an imac leopard

    Hey arturojas!
    Here is an article that might help you achieve this goal:
    Mac Basics: File Sharing
    http://support.apple.com/kb/ht1549
    You could also transfer files directly using target disk mode:
    Mac OS X 10.6: Transferring files between two computers using FireWire
    http://support.apple.com/kb/PH6815
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • What kind of RAM is compatible for my MacBook

    I have a black MacBook 2.0 ghz 1 year old.
    I want to upgrade from 1gb to 2gb of RAM.
    What brand should I buy? (Apple's is too expensive)

    $50 (give or take $5) seems to be a common price point right now for 2x1GB of PC2-5300 SODIMMS. I saw several different brands (Patriot for example) at about that price at Fry's Electronics. The price seems to have gone up $5 this week, but that's the volatility of DRAM prices.
    Crucial from Micron Technology is pretty highly recommended. I've bought through Crucial.com, but often the prices are better through other retailers like Newegg. Here are a few options from Crucial and Newegg. Crucial.com will give you a compatibility guarantee and free shipping if you order specifically for your machine. They collect sales tax in California. Right now they've got the memory you need (first link) for $51.99+tax (if collected).
    http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=110C6937A5CA7304
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820145157
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820148086
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820134554
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820178147

  • What kind of server power needed for 500 simultanious podcast downloads?

    OK I run a VBulletin forum
    We have average 500+ people on line at the same time, some times as many as 750..
    I want to do some podcasting at the time of a trade show, relating to the forums topic.
    What I DONT want is for the forum and server to grind to a halt because we suddenly get a lot of 'pull' / bandwith use because of podcast download / streaming.
    Is there anywhere i can go to get info on the tech / server requirements for podcasts and the load they put on servers?
    Thanks v much in advance!
    Jules
    G4 Ibook 600   Mac OS X (10.3.9)  
    G4 Ibook 600   Mac OS X (10.3.9)  

    I would suggest just hosting your MP3 files on libsyn
    http://www.libsyn.com
    They are setup to handle a lot of podcast bandwidth.
    Remember there is no need to host your MP3 files where you have your main site - Just the XML (Rss Feed) should be on your main site.
    Rob @ podCast411

  • What kind of adapter is needed for a camera sd card?

    My girlfriend has a camera with an SD card, that is 23.5mm wide by 31.5mm long.  The card slot on my MacBook Pro 17" is 35.5mm wide.  I think I have the 2010 year model.  What type of adapter do I need, please to be able to read the card?

    yes there is it's called a express card sdcard reader but that's around $30+....
    http://www.amazon.com/SIIG-Express-Card-Reader-Writer/dp/B000F1YFPA
    here's a sandisk for $10...
    http://www.amazon.com/Sandisk-SDAD109A11-Digital-Card-Express/dp/B000W3QLLW/ref= pd_cp_e_0/184-4721374-9492265

  • What kind of maintenance is needed for my imac

    I am new to the Apple world.  Just switched from PC.  Wondering if there is any tips on how to maintain a clean smooth running iMac?

    Klaus pretty much said it, just leave it alone and it should run happily for years. Keep it up to date by letting Software Update (System Preferences - Software Update) download updates frequently. I have mine set like:

  • What kind of connector is required for the fire wire on iMac early 2009 ?

    Need to connect my external hard drive for downloading using the fire wire input. The old fire wire cable will not match with the compuyer input

    Try buying an adapter from Firewire 800 to Firewire 400
    http://store.apple.com/au/product/HA833ZM/A/belkin-firewire-800400-9-pin6-pin-2m ?fnode=51
    Pete

  • R830 - What kind of RAM do I need

    Hi All,
    Toshiba telephone support was unable to help me so I turn to you.
    I have a Portege R830 (Model: PT320C-01J018) which has 4GB of RAM.
    I assume this is commonly referred to as Portege R830-01J model? (I hope I'm right otherwise my model number simply does not exist)
    I am running 64bit Win7 and would like to add another 4GB, as I wish to run VMWare. However I simply cannot figure out what kind of RAM I need to buy. The technical specs.
    Crucial RAM website says I need DDR3 1600 PC3-12800
    Kingston RAM website says I need DDR3 1333  PC3-10600
    An ad on Ebay says I need DDR3 1333  PC3-10600 (same as what Kingston recommends)
    I opened up the slot for the RAM but could see no markings that were helpful.
    If anyone out there can shed some light on this I'd really appreciate it! Thanks.

    Portege R830 PT320C-01J018
    We support US computers at this site. Everything for that Canadian model is here.
    According to the spec above, Toshiba offers this RAM.
       PA3918U-1M2G DDR3-1333 2GB Memory Module
       PA3918U-1M4G DDR3-1333 4GB Memory Module
    -Jerry

  • HT4167 what kind of charger I need to get for my MacBook black 13?

    What kind of charger i need for my MacBook 13?

    You can get a new third party power adapter on eBay for about $20
    http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313

  • What kind of Ram do I need for my Mac?

    Hello
    I want to upgrade the speed of my mac by adding a 2GB stick of ram. But what kind of ram do i need? Would this work for my Mac (Mid 2011 21.5 inch) http://www.amazon.co.uk/Crucial-PC3-10600-Desktop-Upgrade-240-pin/dp/B001NA25VS/ ref=sr_1_1?ie=UTF8&qid=1390290563&sr=8-1&keywords=2gb+ram?

    Macs are very, VERY picky about the RAM specs they need.
    That RAM is the wrong pin count and probably for PCs and not a Mac
    Here is the proper RAM spec for your year and model.
    32 GB (Actual) 16 GB (Apple)
    Memory Slots
    4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
    Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
    http://www.crucial.com/store/listparts.aspx?model=iMac%20(21.5-inch%2C%20Late%20 2011)&Cat=RAM
    http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
    Good Luck!

Maybe you are looking for

  • Sync a folder between two users on the same computer.

    I would like to sync a folder between two users on the same computer so that they are always the same when I access them from either user.

  • HP Officejet Pro L7780 won't print individual pages of a file

    I have a HP Officejet Pro L7780 setup with wireless printing on my network and am using Windows 7 on a 64-bit computer with MSWord 2007. I'm trying to duplex print just specific corrected pages (like pages 7-8) from a file (of pages 1-22) and my prin

  • Symbol characters are not shown correctly in webbrowser

    Hello, I have migrated my Forms 6i-application to Forms 11G R2 (11.1.2.0). Most problems I have solved. But now I see that Symbol-Characters in boilerplate-text in Formsbuilder are shown correct, but in the web they appear as "translated". In my case

  • Iphoto Not Updated When Uploading to Internet

    When I go to upload a photo online that's in my iPhoto library - half my photos are missing....or the ones I deleted are showing......What's going on??? Say when I go to change my Facebook profile picture to a new photo I put in Iphoto. I click "uplo

  • Error Code 88 with Pixma Pro9500, even when art margins are set correctly

    I'm getting error code 88 (from the CanonPro9500 series print monitor window) when attempting to print on an A3Plus art paper (Hahnemuehle William Turner), even though I have the paper size set correctly (in the Photoshop Print Dialog, Print Settings