What kind of SD card should I use?

Just to make sure, could somebody tell me which cards are compatible?

Thank you! I was using a 64 gig I bought on eBay, and it wouldn't work. I thought it was because it was exFat (you know like it still had to be FAT, not exFAT),  but I believe the card was just defective (the files I copied to it kept disappearing). Well, I am going to be able to return the card, and I just wanted to make sure I was buying the right kind.

Similar Messages

  • What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

  • What kind of blank discs should I use on my macbook?

    What kind of blank discs should I use on my macbook?

    cd-r - for burning audio and MP3 cd's for playback on stereos via iTunes and storing under 700MB in files.
    dvd-r - for burning data dvd's and movies to 4.5GB
    dvd-r ds - dual sided for 9GB
    dvd-r dl - for dual layer on one side about 9GB total, good for making copies of OS X install disks
    dvd-r dl ds  - dual layer double sided for about 18GB total
    then there is blueray dvd's but that requires a external burner and special disks for even larger amounts of data.
    If you see "+" instead of "-" like cd+r, it's a differnet format on the disk, but most all new modern machines can read/burn either now.
    Older machines might only be "-" or "+" with "-" being the most commonly used.

  • What kind of CD-R should I use?

    I've recently had problems burning CD's from iTunes . . .the CD's seem to burn correctly, but when I insert them into one of several DVD players, they skip, pop and do other weird things. (Burning DVDs from iDVD runs smoothly.) I have the original drive that came with my G5 as follows: PIONEER DVD-RW DVR-117D.
    Reading through the forums, it seems that the type of media used is a common cause of problems like this. I don't know what kind of CD's I was using before, but the spindle I have now contains Memorex CD's with a 52X max speed, and hold 700 MB.
    I think my drive has a maximum speed of 16X, so I tested burning at 16X and then 4X . . .I got the same results.
    If I'm reading the threads correctly, my drive would work best with 650 MB disks with a max burn speed of 16X. As far as I can tell from Goggling however, that kind of disk is no longer exists.
    So what specs should I look for that will be most compatible with my drive?
    Thanks!
    Bryce

    Thanks! It looks like these drives are only $26 . . .I'll bet I've spent at least half that much in wasted CD's over the past few days.
    Perhaps this next question should go over to the Final Cut Pro discussions, but I'll start here . . .as long as I'm considering replacing the drive, I'm wondering if I should upgrade to something better/faster.
    I remember there being an issue some years ago that software like iDVD and DVD Studio Pro would only write to certain Apple sanctioned DVD burners.
    For me, it's less about the money and more about have equipment that works properly . . .and faster (time is money).
    Any advice about upgrading?

  • EMERGENCY: what kind of jdbc driver should I use?

    Suppose one machine with 9iAS standarv version installed, and another one with oracle8.1.6 installed. OSE is used for JSP and servlet engine. In this case, Oracle internal JDBC driver does not apply, am I right? Then what kind of JDBC should I used to access the database on the other machine?
    thanks
    null

    Your have 4 driver options :
    1) 2 from a client install
    a) jdbc thin
    b) jdbc oci with a client install
    2) 2 from inside the JVM including the ose component.
    a) server sdie internal(kprb) -- for inside the rdbms usage ONLY
    b) server side thin driver.
    Please review the following "overview" :
    Overview of the Oracle JDBC Drivers
    http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/a83724/overvw2.htm#1000908
    For server side jdbc connection the following information is also relevant :
    It applies to java code in IAS 9i running in the Oracle jvm (including the ose) -- but not the apache jserv component.
    JDBC in the Server: the Server-Side Internal Driver
    http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/a83724/advanc4.htm#1001042
    i hope this helps ....

  • What kind of data structure should I use?

    I have a user input dialog basically like following which need user input the sample number to specifiy each file belongs to which sample:
    user input the sample number in the following dialog:
    file name             sample
    test 1                  1
    test2                   2
    test3                   1
    test4                   2In another words, each sample could include multiple files, each file has a column of data. I tried to get
    a data structure which specifies the sample and file relationship, to get an idea of what kind of files are in
    one sample. I tried to use hashmap or hashtable, but they ask the key must be unique. What I need is to get the sample data structure for the later data processing.
    thanks in advance!

    You could make a Sample object, which creates a List of file names. Then put SampleNumber and SampleObject into a Map...
      class Sample {
        java.util.List fileNames;
        Sample()
        {  fileNames = java.util.ArrayList(5); }
        addFile(String fName)
        { fileNames.add(fName); }
        String[] getFileNames()
          String[] names = new String[fileNames.size()];
          for (int a = 0; a < names.length; a++)
          { names[a] = fileNames.get(a).toString(); }
          return names;
      Map samples = new HashMap();
      Sample samp1 = new Sample();
      samp1.addFile("Test1"); samp1.addFile("Test3");
      Sample samp2 = new Sample();
      samp2.addFile("Test2"); samp2.addFile("Test4");
      samples.add("1", samp1);
      samples.add("2", samp2);
      String selected = //String user selects...
      Sample sampNeeded = (Sample)samples.get(selected);
      String[] files = sampNeeded.getFileNames();

  • What kind of visa session should i use to communicate with a serial instrument?

    I´m trying to communicate with a serial board, i don´t want to use the Measurement and automation explorer, so the resource name should be COM1 instead of ASRL1::INSTR, how can i do this?. What king of session should i use? Waht visa VI should i use to open, close read and write from the srial port?. I want this to work with out MAX. Thanks in advance

    The below link dtalks about LabVIEW.ini settings.
    Go to this link and scroll down to the entry for serial. It will show you the syntax you need and alos provide another link for more info.
    I seem to remeber (not sure) that Visaconfig.ini defines the aliases normally assigned by MAX.
    http://labview.brianrenken.com/INI/undoc.shtm
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • What G4 AGP graphics card should I use for 20" acrylic display?

    I bought a 20" acrylic cinema display on ebay.
    I also got the apple DVI to ADC power adapter to hook it up to my G4 350 mhz AGP tower.
    When turning on the computer, it would show the gray apple startt-up window with the rotating icon then go black.
    Turns out the old ATI Rage 128 Pro card only supports up to 17" displays.
    What cards would you suggest to get the 20" display up and running?

    Hi-
    Welcome to Discussions!
    There are a few choices, many hard to find, but you can get the ATI Radeon 9000 or the GeForce2MX at the following:
    http://hardcoremac.stores.yahoo.net/memory3.html
    Both are 2x/4x AGP, and should work with no problems in your 350AGP tower, and drive the 20" display beautifully.
    Note that they are used cards, but new are extremely rare, and carry a high price.

  • What kind of screen protector should I use for my iPhone 6? Should I use one?

    I'm looking for a screen protector for my brand new baby. To my dismay, it's hard to find one that "fits" because of the curved edges. I have ocd, not to mention that what isn't covered by a screen protector are usually crucial areas. Can anyone recommend anything? I always use a screen protector because I'm super paranoid. I throw my phone in my purse a lot where I feel like it will come in contact with one too many things that can scratch it. I don't have a ton of money to spend, sorry I'm a college student. Also, I don't like glass protectors. If I need one I'm looking for a film. Thanks in advance from a new iPhone 6 parent!

    I have an iPhone 6 Plus but I thought I would try to help you out!! I use the Zagg Glass Invisible shield and I must say at first I loved it! It feels smooth and accepts input super well! It doesn't, however, go all the way to the edge of the screen which is weird, I agree. I've only had it for about a month now and its already chipped on the top edge by the speaker and its super annoying!! They will replace it for free but I'm not sure that I want another one that chipped so easily.
    I've heard great things about the iloome screen mate and it goes all the way to the edge of the screen and covers the curved part. I know you said you don't like glass protectors but those are the best and if you get a good one you pretty much only need to replace it once a year so you pay a bit more up front but it lasts a lot better than just film ones. Hope that helps!!!!!

  • HT3500 i just want to connect with hp printer what kind of wire i should use

    i just want to connect with hp printer what kind of wire i should use

    Is your HP printer wireless? If so, no wire.
    If it isn't plug it in using the cable it came with. Simple.

  • What kind of version checking should be done for applications using SQLDBC

    Hi,
    This query is regarding the kind of version checking that an application should do.
    Currently I am building my application in MaxDB version of 7.6.05.09, which is the community edition available on the sdn download site currently, this will change to the enterprise edition once we have finalized everything in terms of code and packging etc....
    Now when the application is shipped to customer site, what kind of version checking should the application do to ensure that the version of library/kernel/client/sdk it has been built with is consistent with the one that is installed at the customer site.
    From what i see SQLDBC exposes the following method for getting version related information.
    char * SQLDBC_Environment_getLibraryVersion(SQLDBC_Environment* hdl);
    char *getSDKVersion();
    SQLDBC_Int4 SQLDBC_Statement_getKernelVersion(SQLDBC_Statement* hdl); (Note: Wondering why should a handle to SQLDBC_Statement be needed to find the Kernel version)
    Just to give you little more hint of what i am talking about, for MySQL database we use the functions
    mysql_get_client_version and mysql_get_server_version and check that the values returned by these functions are less than the value which was used at build time.
    Regards
    Raja

    Hello Raja
    From the documentation:
    const char* SQLDBC::SQLDBC_Environment::getLibraryVersion ()   
    Returns the version of used SQLDBC runtime.
    This is the version of the used SQLDBC library. The version of the loaded
    runtime may differ from the version inidacted in the used header. It is our
    aim that newer versions of the runtime will run with old applications without
    the need to be re-compiling.
    Therefore, for compatibility checks, use getLibraryVersion.
    getKernelVersion is also available from the connection:
    SQLDBC_Connection::getKernelVersion()
    Regards  Thomas

  • What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability. Trying to find which is better.

    What USB 3.0 card should I get for early 2009 Mac Pro so I can connect the Drobo 5D? They say get CalDigit or Sonnet. Anyone have preference or experience with reliability with this. I am running Lion and Trying to find which is better as I know from experience not all cards are created equal. Thanks in advance for your help!

    yakov536 wrote:
    High Point RocketU Quad USB 3.0 for Mac is working great for me. Had an issue with CD/DVD Drive which was resolved with most current driver downloaded from the support site.
    Running Moutain Lion on Early 2009, mirroring two Seagate Go Flex 2TB USB 3.0 Drives. Installed in Slot 4.
    Using it primarily with VMWare Fusion for Virtual Drives. Windows, Unbuntu and other OS running really well.
    HPT Support was responsive and very helpfull using the WEB Portal under the product page.
    I have some comments and a suggestion:
    Have you tried your setup with a SD/CF combo card reader (like the Lexar or Kingston FCR-H63)? Does the card appear on the desktop when first plugged in?
    Did you need to fool around with any kind of power issues in installing this card in the x4 PCIe slot of the MacPro?
    Suggestion. Have you tried one of the fixed in this article to cure the BT issues in MacPro 3,1?
    Good luck.
    Henry

  • What kind of external drive should I get for my macbook pro for backups etc

    what kind of external drive should I get for my macbook pro for backups and storage

    Hi, i have a Mercury Elite-AL Pro from OWC, www.otherworldcomputung.com
    this is the one;
    http://eshop.macsales.com/item/Other%20World%20Computing/MEAQ7S1TB32M/
    have had this for over two years, moved around a lot with the drive, ( to date ) no problems, they have good after sales support; give them a call if you need info.
    There are a lot of drives out there as others here will let you know, there are good NAME drives but they also fail, POPULAR drives also fail, select the one you are happy with for your system and how you plan to use.
    i suggest if $ is not a problem get a big drive you will find someting to put on it and is better.
    hope this helps.

  • I need in Formula Node to assign to the variable value 4000000000!!! What kind of variable it should be???

    i've just tryed to write unsigned in32, but it does not understand 'unsogned'... But i need variable to be unsigned, because the max value = 4000000000... So, how can i solve this probleme???

    Hi,
    I don't see exactly what you're trying to do here.
    Where do you want to assign the variable 4000000000 to? If you want it as an
    input, just use a dbl, with only zeros behind the coma.
    Note that an integer is a number without any decimals. An integer in LabVIEW
    is this, but with an extra limitation that it can only be 32 bits... So a
    dbl can be an integer.
    If the input dbl is not an integer, use round, round to -inf or round to
    +inf to make it one. This can also be done if the output needs to be an
    integer.Inside the formula node floor(x), int(x), intrz(x) or ceil(x) can be
    used to make integers.
    I hope this is what you mean... I can't see any problems doing this.
    Regards,
    Wiebe.
    "DrON" wrote in message
    news:506500000008000000E
    [email protected]..
    > I need in Formula Node to assign to the variable value 4000000000!!!
    > What kind of variable it should be???
    >
    > i've just tryed to write unsigned in32, but it does not understand
    > 'unsogned'... But i need variable to be unsigned, because the max
    > value = 4000000000... So, how can i solve this probleme???

  • What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

    Hi,
    What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
    Ushas Symon

    It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
    Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
    Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
    The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
    your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
    Good luck.

Maybe you are looking for