What kind of sim card is used?

Pl tell me what sim is used in intex cloud firefox phone?

Normal Standard '''MINI-SIM''' card is used in intex cloud Firefox phone.

Similar Messages

  • What kind of SIM can I use to activate my Unlocked GSM iPhone 4S?

    I just paid for an unlocked iPhone 4s NOT on a contract and when I got it it asked for a SIM card to activate it, otherwise, it's useless. I knew this prior purchasing the phone but I figured it would be simple just finding a card. I called Apple and they told me to call AT&T, and AT&T told me I could purchase one at walmart.. well the people at walmart looked at me like I was stupid and told me to "contact the iPhone store"... If anyone knows of a card that WILL in fact work, please let me know (: thanks!

    To acitvate iPhone with SIM Card, takes about 3 seconds time of needing the SIM Card. Walk into any ATT store and they should be able to help you with a free Micro SIM Card. If any trouble, ask for the Manager and clearly explain the situation.
    You will need a SIM Card from a Carrier to use the iPhone as a Phone. Who is going to be your Cell Phone Carrier? They will help you the best. To acitvate iPhone with SIM Card takes about 3 seconds time of needing the SIM Card.

  • HT1766 im updating my iphone from 3.1.2 to 3.1.3 version and suddenly it says the sim card im using dosnt support my i phone..then i cant open my phone..what can i do?

    im updating my iphone from 3.1.2 to 3.1.3 version and suddenly it says the sim card im using dosnt support my i phone..then i cant open my phone..what can i do?

    Use a supported SIM card.
    Remove/re-install the SIM.
    Try a different SIM.

  • What is a SiM card and do I need one in order to send email from my iPad?

    What is a SIM card and do I need one in order to be able to send email from my iPad?

    For further detail, a SIM card is a very small, thin, printed circuit card which you insert into a tiny drawer in your mobile device. It is your mobile/cellular account, with your personal details on it. So you can move it from one device to another. Before smartphones (like the iPhone), SIM cards also contained your Contact list. Since smartphones contain so much information now, the SIM card just identifies you to the cellular/mobile network. It means you can carry your phone number with you from one phone to another.
    You can get a SIM card for iPad from any Apple Store or phone shop. Note that the newer iPhones and the iPads use what's called a "micro-SIM", which is smaller than a regular SIM card, so it takes up less room inside the phone, and they can stick more hardware in there for better performance. Make sure you ask for a "micro-SIM for iPad".
    As Rudegar says, you don't need a SIM in your iPad if you always have WiFi access. But if you need to send email or messages outside a WiFi network, then you need a SIM, so you can access the cellular/mobile phone tower network.
    You can get prepaid SIM cards which give you so much data for a certain period of time. You need to decide how much data you need, and how often you want to "recharge" it. The salespeople should be able to help you work that out.

  • Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is network

    Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.

    Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
    According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
    Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
    Try what I suggest think to will help u

  • What kind of Soundblaster can be used in a PCI64/32 Slot of a Server ?

    What kind of Soundblaster Card?can be used in a PCI64/33 Slot of a Server ?
    can anybody help? me ?
    Thanks and Sorry for my English ;o)

    X-FI PCI 32Bit Cards?with 33MHz will fit into a PCi 64Bit slot. (The Slots must only support PCI 2.2 or later.)?Even a PCI-X slot can dri've PCI 32 33MHz cards. Downside: the PCI bridge will clock down all connectet PCI slots to 33MHz. Most PCI 64Bit slots supports 66MHz clock speed.
    Older PCI cards like Audigy will run in a 2. or lower?compatible PCI Slot.
    Message Edited by fffcmad on 03-26-2008 0:3 PM

  • What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    What kind of graphics card should i get to run final cut pro x on my 2008 mac pro?

    Hello Andres. I own an Early Mac Pro 2008, and have had the blessing of using both FCP X & Motion 5 for some time now. This is a pritty open question and it depends on your usage and the throughput nessesary to handle your work load. I can share what my set up is, & it may help you deside if this is enough power for you or help you move in another direction. Keep in mind that the buss speed and cpu are a big part of helping FCP X more so than the video card, although the video card does come into play here as well. Now if you are wanting to run Motion 5 as well, the video card is Almost Everything, and you need the biggest and best situation here that the throughput on this system will except. I'm running 14 gig of system ram, and the video card is an ATI Radeon 5870. For FCP X, running 1920x1280p footage optimised in pro-res 422, she can move along with some render time nessesary when dropping on the timeline, also filters, transistions, titles ex, have a bit of a laps time to render, but then she runs ok. This wait is not as much of a challenge with this set up as with Motion. I need a much bigger gpu on the video card for this app. Not sure if this computers throughput is really worth the upgrade. Beleive this though, Motion is demanding on using ALL you can give it. It is a Genious App, and it also calls for ALL THE POWER YOU CAN GIVE HER IN A VIDEO CARD. Conclution: if you are just starting which it sounds like, even a smaller video card than this can work For FCP X. Make sure you have at least 8 gig of cpu ram. 12 or more will help here. Also make sure the card is OpenCL compadible.....& this is in the thread above,,,,,,,,

  • What is a sim card?

    what is a sim card and what is it used for?

    http://en.wikipedia.org/wiki/Subscriber_identity_module
    http://www.wisegeek.com/what-is-a-sim-card.htm

  • What kind of adhesive does Apple use?

    The bottom case of my TiBook is a little loose at the battery corner. When I type and rest my palms on the top case, it kind of "pops" or "clicks" a bit as the pressure moves the top and bottom cases together. It's not a big deal, but it's annoying enough to want to fix. I tried to get the folks at my local Apple repair center to deal with it under Applecare (I have about a month left.) They said it wasn't a warrantied problem, but they did offer to glue it for free. I didn't think that was a good idea, so I declined. I have since been told that Apple glued the bottom cases of the TiBook to the frame at the factory, so that would have been the appropriate repair.
    If that's true, what kind of adhesive did Apple use for that, and exactly where was the glue applied? It must have been a prettty strong glue, and sparsely applied, as I didn't see any traces of it when I took the bottom off the computer. In any event, if gluing is the right move, I'd just as soon do it myself. The repair center would take at least a week, since they're usually so backed up. But I don't want to use anything that might damage the case or leak into anything.
    Thanks in advance for your help.

    The metal skin is really glued around the edge by a plastic frame. It is this frame that holds the skin to the main frame and can give problems.
    I had to open my ti case to install an airport card. I either did it wrong or the apple glue job was poor because the gray plastic trim around the edge of the metal skin had come loose over 50% of the circumference.
    I had a commercial 3M rubber cement on hand so I used that. I applied it with a toothpick very sparingly (of course the rubber cement gets stringy so the job was a ittle messy).
    I let dry in a warm room for 24 hours. The reason I did that was fumes from curing glue can be caustic and attack some very thin metals etc. I fugured I wanted to lose any fumes before I trapped them in the warm computer.
    It worked well and I haven't had a repeat of the problem.

  • How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

    How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

    Copied from the link provided.
    Follow these steps to use your iPhone without a wireless service plan:
    Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
    Connect the iPhone to iTunes on a computer connected to the Internet.
    Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

  • Many of the times my Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore but still not working.. please help me..

    My Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore,change sim card, reset all the settings but still not working... please help me..

    Please do not double post a subject. Iphone 5S  I answered your other thread.

  • Where to find sim card nomber using a imei  iphone 2g from at&t

    where to find forgoten sim card nomber using a imei  iphone 2g from at&t

    The sim card number is on the sim card. If you don't have the sim card, there is no way to retrieve it, except perhaps from your carrier.

  • What kind of database the SSMA uses to store metadata in the file named "source-metabase.mb" ?

    What kind of database the SSMA uses to store metadata in the file named "source-metabase.mb" ?
    I'm looking for the method to open the file and add 'cutom migration script' (some automatization).

    Hi Poman.Pokrovskij,
    When you generate SSMA Assessment Report, there are several files created and saved into Report folder under your SSMA project folder. It includes
    source-metabase.mb, project-container.mappings, preferences.prefs, and so on.
    . MD files are usually saved in plain text format including inline text symbols, defining how a text is formatted such as the indentations, its table formatting, fonts, and headers.
    SSMA provides a project setting that allow you to customize how to set customized database migration. For example, to customize data migration SQL statement, you can modify project setting by navigating to Tools and choosing Project Settings,
    then looking for the setting for
    Extended Data Migration Options and change the value to
    Show. You can select use custom select and modify the SQL statement.
    For more information about SSMA for Oracle, you can review the following articles.How To Perform Incremental Data Migration Using SSMA:
    http://blogs.msdn.com/b/ssma/archive/2010/10/04/how-to-perform-incremental-data-migration-using-ssma.aspx
    Using SSMA Project Setting to Customize Database Migration:
    http://blogs.msdn.com/b/ssma/archive/2011/03/16/using-ssma-project-setting-to-customize-database-migration.aspx?Redirected=true
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • I have a videocamera minidv what kind of cable i had used to import the movie?, I have a videocamera minidv what kind of cable i had used to import the movie?

    I have a videocamera minidv what kind of cable i had used to import the movie?

    Which MiniDV Video Camera?
    What version iMovie do you have on your Mac?
    For starters, have a look at > Apple - Support - iMovie

  • Can I purchase an IPhone 5 that is factory unlocked, so that I can insert my t-mobile sim card and use it on my service from the apple store?

    Can I purchase an IPhone 5 that is factory unlocked, so that I can insert my t-mobile sim card and use it on my service from the apple store?

    Not in the US, at the present time. Apple has not started selling officially unlocked iPhone 5's in the US, & has not announced when they will.

Maybe you are looking for