What kind of USB hubs work with the 2014 version of Time Capsule?

The latest post I could find on USB hubs archived from 2012 and I'm wondering what today's information is. 
I have a Sabrent HB-J3U7.  It is a 7 port USB 3.0 hub, two charging ports and five "normal".  I think I remember reading the charging ports can deliver about 2 amps each.  Obviously the Sabrent is a powered hub.  I plugged it into the TC's USB port and nothing.  No lights on hub indicating a connection at the device plug in ports. 
I did a little experimenting and the hub works fine when hooked to my iMac (OS X 10.9.4).  The individual devices work fine when connected straight to the TC USB port.  All I can discern is that this hub is not compatible with TCs.  Too much power maybe?  The iMac has a USB 2.0 controller like the TC and the hub works there so I don't really understand the failure on the TC. 
Then, for some reason, I tried the hub when it was disconnected from power and I could finally see the Sabrent hub connected devices (32GB USB 3.0 thumb drive and 2TB USB WD Passport - both formatted Extended Journaled).  So I plugged the Sabrent power up and it still worked.  That is until I tried to rename the TC hard drive through Airport Utility which required an update to TC.  TC wouldn't restart.  Just a solid amber, not even flashing amber.  I disconnected Sabrent and unplugged the TC and replugged and TC worked again but now I'm afraid of the Sabrent.
Does anyone have ideas about what is going on?  Any help would be appreciated. 

The hub is not compatible. It sounds like the unit is powering the link to the TC.. which would cause the TC to freeze up. You might need a special USB cable which has just data connection but no power.
It is really hard to get info on hubs that work.. particularly because there are so many around and many are changed .. eg if you buy a belkin this year it fails when last years one worked.. that is because all the manufacturer is farmed out to various factories in China who use .. the cheapest parts available today to build them.. next week it could be different.
The TC just doesn't have a huge amount of memory to store drivers for every USB under the sun. So some work some don't. The best I have found is the cheapest brand x USB2. I would not bother with USB3 since that chipset is even more unlikely to be supported than USB2 ones.
I have tried to get people to add to a database.. not much so far.
https://discussions.apple.com/thread/5912861?tstart=0
Appreciate anyone who takes the time to add their experience.

Similar Messages

  • With all the games coming out for iMacs what Gaming Pad or Jotstick works with the Imac

    With all the games coming out for iMacs what Gaming Pad or Jotstick works with the Imac

    Now the bad news. In my "Print to Video" pop up, if
    I select "Color Bars" , "Black", or any other option
    and take out my bars and tone and slug from the
    timeline, the print to video does not print anything
    to tape except for a nice nothing blue. I don't
    even get my actual timeline video printed to tape.
    Jerry,
    You are a genius! Man do I feel silly. So just for the benefit of others who might read this post, I did exactly as you said, and of course when I restarted FCP, I had to identify my Firewire NTSC setting for the drive. This time, instead of leaving my tapedrive offline, I left it on and immediately saw on my drive monitor the video coming off of my timeline.
    Every thing works perfect. I now have a clean timeline with just the content I'm working on and don't have to worry about bars, slugs, post black. Just a few checkboxes and I'm ready to send my tapes off. Really nice feature.
    Thanks!
    iMac   Mac OS X (10.4.6)   2GB DDR2, 500GB Disk, 20" LCD

  • What Speedlite (or generic) flash works with the SX50? Thanks.

    Hello & Merry Christmas to all,
                                                          Trying to find out what flash is made to work with the SX50. Seems like unless you have a DSLR, there isn't much info. I checked under Canon PowerShot. I'm very new to photo', so I'm asking a newbie question.
    Speedlite or other brand flashes for the SX50 hotshoe. One that works with the camera, not just a 'flash'... Thanks

    Felix,
    The following flash models are supported:
    Speedlite 220EX
    Speedlite 270EX
    Speedlite 270EX II
    Speedlite 320EX
    Speedlite 430EX
    Speedlite 430EX II
    Speedlite 580EX
    Speedlite 580EX II
    Speedlite 600EX
    Speedlite 600EX-RT
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Before I downloaded the latest version of Firefox I could us the Norton Idnetity Safe. It will not work with the new version. What do I have to do to make it work?

    I am not sure if this is a plugin or extension. All I know is that it worked with the old version of Firefox. It is very important to me to be able to use this feature. Any help would be appreciated.

    THIS ISSUE IS RESOLVED FOR ME.
    When I opened this pop-up to view the settings (File > Page Setup > "Format & Options": Scale ), the Scale value was 40%. Changing it to 100% corrected the issue I observed.
    To my knowledge, I have not been inside this pop-up window before to set the Scale option. Could this value be affected by other actions within Firefox? I noticed this while using v12 which was installed 24Apr2012.I know it worked correctly since that installation, so why did the Scale value change?
    UPDATE: I just realized that the Scale option in print preview sets the Scale value in the settings. NOTE TO ALL: This is a sticky setting, not just a setting for a specific output request.

  • I'm using the Internet Personal Ancestral File Family Search but I'd like to work with the old version. Could you help me how to use it? Thank you

    I was working with the old version of Family Search Personal Ancestral File through Internet but I cannot deal with the new version which uses Firefox. Could you help me to work with the old version? Thank you

    Junho wrote:
    However, in Numbers, I cannot do the same thing with same procedure..
    What should i do to get all of those 4 at the same time?
    Please let me know..Thank you!
    First, be aware that Numbers is not MS Excel, and Excel is not Numbers. Features available in one of these two applications are not necessarily available in the other.
    LINEST in Numbers works somewhat differently from what you describe. The function is well described in the "iWork Formulas and Functions Help" document, available through the Help menu.
    I'd start there, with a search for LINEST.
    Regards,
    Barry

  • I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!

    Hi, M_ghaderi.  
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I may be way out, but do you know about this product, would it help integrate the Macs for you.
    https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

  • How can I update a Numbers '08 document to work with the current version?

    I've had Numbers '08 for quite awhile (obviously). Have a few spreadsheets in it that I tried as an alternative to Excel. I've now got the most current version of Numbers but it won't open the spreadsheets created in the '08 version. I get an error message telling me to save them with Numbers '09, which I do not have.
    Is there any way to get these updated to work with the current version? If so, that would be great, would like to try it out. If not, I'm just going to copy this stuff into Excel and be done with Numbers entirely.

    This is a work-around - but also send feedback to apple that that is pretty low in the 21st century where people may keep data without opening it for a very long time - then need it desperately.
    http://www.apple.com/feedback/>Apple - Feedback
    Export the spreadsheets to another format - CSV may work - then import into the new version.
    Also you could try export to excel format and import.

  • "Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

    "Papers" citation manager no longer works with the new version of pages '13. Is there a fix out there?

    Do take a look out there. It is a third party applications so better check out Papers site.

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • I am unable to print to the Lightning PDF software (by Avanquest Software) after updating to 6.02. It worked with the previous version of Firefox. Is there a patch or fix for this problem?

    I am unable to print to the Lightning PDF software (by Avanquest Software) after updating to 6.02. It worked with the previous version of Firefox. Is there a patch or fix for this problem?
    This is the error that is received:
    Cannot open file "C:\Users\Calandra\AppData\Local\Temp\Ask_a_Question__Firefox_Help.pdf". The process cannot access the file because it is being used by another process
    Any information that you can provide will be greatly appreciated.

    Sorry to say that, but the entire system seems ill-designed.
    If I understand correctly, then to add a new Section to a site, you have to subclass SubSection and somewhow integrate that into the system?
    I would be my expectation that you only need to subclass SubSection when you tried to introduce a new type of SubSection.
    The title & all other natural language Strings should never be hardcoded in Java code, but rather taken from some external storage (Database, XML, flat files, ...).

  • I have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    i have laptop with digital persona (finger scanning) to automatic feed the passwords. it was working properly with the older version of firefox but is not working with the latest version of the firefox. why? give me a solution.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • Why doesn't the track pad zoom feature on my Macbook Pro work with the newest version of Firefoz?

    The track pad zoom feature doesn't work with the latest version of Firefox. It did on the previous version. I used to use Firefox as my default browser, but no longer use it very much due to the incompatibility of this version on my Macbook Pro.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.latched -> <b>false</b>
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    You can use the Filter bar at to top of the about:config page to locate a pref more easily.
    * [/questions/777886]

  • Does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion?

    Hi, does anyone have drivers that will enable a Tascam US-144 (old model) to work with the latest version of Lion? The drivers available on the manufacturer's download site are for a newer model and were not designed specifically to work with Lion. Does anyone have a tried and tested fix for this? Thank you.
    Message was edited by: john.rm

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • The dictionary verbace dosen't work with the 4th version of the browser !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    the dictionary verbace dosen't work with the 4th version of the browser !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    the dictionary verbace dosen't work with the 4th version of the browser !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Maybe you are looking for

  • Problem: check random array with a static value

    My goal is to use the random number generator to put numbers into randomArray, then do a linear search to try to find if the number 5 has been generatated. Next print out where in the array the value can be found. I have no compile errors but I have

  • DB Session-Problem

    Hi We have a problem with the DB-Session-Handling. We have a Communication Channel,  that reads data from the database. We open and close this channel from extern via a scheduling-tool. Each time when the channel starts and stops 5 minutes later, it

  • Updating to signed JARs causes problems for older Java versions?

    Bear with me on this one -- not a Java developer, but an end user of Java products looking for a little clarification. We use a product which delivers a Java application via JAR file / web to end users (GlobalScape's EFT server).  With the recent rel

  • UWL Basic configuration

    Greetings, I am trying to solve a problem I have in UWL - SAP transactions (such as requisition approvals) are opened in not-maximized browser window, and ITS is creating a screen, which is smaller then it should appear. Not all elements are visible,

  • Can I load a second copy of Photoshop Elements 12 on my laptop?

    I have Photoshop Elements 12 on my Mac. I recently bought a Macbook Pro. Can I load a second copy of Elements 12 on my laptop with my current licence?