What kind of wireless mouse can I use?

What kind of wireless mobile mouse can I use with my MacBook Air?

Just about any you find available. I'm partial to Logitech mice and use the Anywhere mouse. I can highly recommend it.

Similar Messages

What kind of range extender can I use with airport express

WHat kind of range extender can I use with an airport express?

WHat kind of range extender can I use with an airport express?
Use any router that you want if you will be connecting the extender/router back to the AirPort Express using a permanent, wired Ethernet cable connection.
If you are planning to use a wireless connection to extend the range of the network.....then another AirPort Express, AirPort Extreme or Time Capsule will be required.

What kind of video formats can i use to import into imovie?

what kind of video formats can i use to import into imovie?

Hello,
Adobe stopped supporting flash for android since ICS. You may still be able to download the latest (old) flash player "at your own risk" from Adobe archived flash player versions:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Please read the disclaimer at the end as it is not advised to install unsupported flash versions.
As for video streaming, there are lot of apps for that and it's just a matter of your preference.
Hope that helps

What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and

Hi,
What kind of KVM switch can I use to monitor sun rack with 490s, 245s, and T2000s ?
Ushas Symon

It sounds like the customer and server room operator are using a Microsoft/X86 mindset. There are several selling points on using RSCs & SCs. First off are the big 3 that are easy for any good server room operator to understand: cost, space & power. If you don't have to buy a 1U Tripp-lite pull out rack KVM console ($1700) and a video card for each of your SUN servers ($400, yes SUN vid cards are $$$), you start off by saving several thousand dollars.
Next you need to let them know that you require remote access to the systems from your desk and a standard KVM doesn't allow this (with Unix, if you have to get up from your desk then its a hardware problem). They can choose to purchase a network enabled KVM, but that adds $700 to your $1700 KVM. By using the SC you will be able to administer the system remotely.
Third, remember that SUNs do not show all the critical boot information on a frame-buffer console output. If you are in diagnostic mode during boot, the monitor doesn't show results until it completes. If some process is stuck (missing NFS or fibre-channel hard mounts, memory tests, etc) then you need to be able to see it to fix the problem. Plus, console frame-buffers only give you 25 lines of output that you can't scroll back.
The only small hitch is security. The new SCs (on T5220s) have SSH built in, but the older V240s and V490s use telnet which some security people balk at. The solution that we used is to put the older system SCs on a private LAN. Access to that private LAN from our intranet is via a SSH enabled dual-homed (non-routing) workstation with local user accounts. We SSH to that workstation & then telnet to the SC on the relevant server. That solution allows me to access our servers that are 40 miles away, saving response time to solve customer problems. A crude diagram is below:
your workstation------intranet------[dual homed, non-routing workstation]------[inexpensive switch]------[server SC]
Good luck.

What kind of external microphone can I use with the MacBook Pro?

What kind of microphone can I use with GarageBand in MacBook Pro ?

It depends which MBP you have. Some of the newer ones don't have an audio in port, so you need a USB adapter with an audio in jack.

What kind of word processor can I use for the Mac OS X version 10.5.8, what kind of word processor can I use for the Mac OS X version 10.5.8

I got a macbook 2008 for free. Since I already have an iMac with everything already installed, I only want to use this macbook 2008 for pages but it looks like I cannot upgrade the software therefore I cannot download pages. What word processor can I use?
Thanks!
Edith

I would recomment Libre Office instead of Open Office. Look for information on Office 2011 here. You will find iWork '09 Boxed Set here.

What kind of video format can i use in photoshop cc?

i tried to import mp4, mov, mpeg etc....all didn't work. what can i do?

Are you getting any error messages?
You could try resetting your preferences (just before starting photoshop hold down the 3 modifier keys
{shift+ctrl/command+alt/option}
When photoshop starts you will get a pop up asking if you want your preferences reset, just click yes and if that message does not appear try again)

What kind of blank CDs can I use?

I cannot finish a burning a disk because right when it is nearly finished, it gives an error and ejects the disk, is there a special cd-r? When I am in the eMac I will get the error message, I am on the macbook now. Has anyone else had a problem with burning disks?

And as a follow up to Ian's post, generally you don't need special CD-Rs of any kind on an eMac so the problem is either something with the eMac or a batch of bad CDs. Does this happen on a bunch of CDs from the same pack or did this only happen once and you haven't tried it with other blanks?
Patrick

What kind of Flash Player can i download for Firefox.? What kind of video player can I use to stream videos.

Flash player for streaming? Best video player.

Hello,
Adobe stopped supporting flash for android since ICS. You may still be able to download the latest (old) flash player "at your own risk" from Adobe archived flash player versions:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Please read the disclaimer at the end as it is not advised to install unsupported flash versions.
As for video streaming, there are lot of apps for that and it's just a matter of your preference.
Hope that helps

What kind of CD-R should I use?

I've recently had problems burning CD's from iTunes . . .the CD's seem to burn correctly, but when I insert them into one of several DVD players, they skip, pop and do other weird things. (Burning DVDs from iDVD runs smoothly.) I have the original drive that came with my G5 as follows: PIONEER DVD-RW DVR-117D.
Reading through the forums, it seems that the type of media used is a common cause of problems like this. I don't know what kind of CD's I was using before, but the spindle I have now contains Memorex CD's with a 52X max speed, and hold 700 MB.
I think my drive has a maximum speed of 16X, so I tested burning at 16X and then 4X . . .I got the same results.
If I'm reading the threads correctly, my drive would work best with 650 MB disks with a max burn speed of 16X. As far as I can tell from Goggling however, that kind of disk is no longer exists.
So what specs should I look for that will be most compatible with my drive?
Thanks!
Bryce

Thanks! It looks like these drives are only $26 . . .I'll bet I've spent at least half that much in wasted CD's over the past few days.
Perhaps this next question should go over to the Final Cut Pro discussions, but I'll start here . . .as long as I'm considering replacing the drive, I'm wondering if I should upgrade to something better/faster.
I remember there being an issue some years ago that software like iDVD and DVD Studio Pro would only write to certain Apple sanctioned DVD burners.
For me, it's less about the money and more about have equipment that works properly . . .and faster (time is money).
Any advice about upgrading?

What version of Quick books can I use with 10.6.8?

What version of Quick Books can I use with my IMac version 10.6.8?

Contact Intuit to find out. The current version requires Lion 10.7.3 or later. Or you could upgrade OS X:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

What kind of blank discs should I use on my macbook?

What kind of blank discs should I use on my macbook?

cd-r - for burning audio and MP3 cd's for playback on stereos via iTunes and storing under 700MB in files.
dvd-r - for burning data dvd's and movies to 4.5GB
dvd-r ds - dual sided for 9GB
dvd-r dl - for dual layer on one side about 9GB total, good for making copies of OS X install disks
dvd-r dl ds - dual layer double sided for about 18GB total
then there is blueray dvd's but that requires a external burner and special disks for even larger amounts of data.
If you see "+" instead of "-" like cd+r, it's a differnet format on the disk, but most all new modern machines can read/burn either now.
Older machines might only be "-" or "+" with "-" being the most commonly used.

What kind of glass or plastic is used for camera lens

What kind of glass or plsastic is used for camera lens protection?
Solved!
Go to Solution.

Its glass but I'll see if I can find more info on it
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

What kind of material type i should use?

Dear all,
I am wondering what kind of material type I should use for the following type of material:
The material is Chicken used in like KFC- type of eatery franchise store.
The eatery franchise store buy the chicken from external party, next, this store process this chicken (i.e. cut into pieces) and become chicken salad and sell this chicken salad to their consumer.
Personally, I donu2019t think this kind of material can be classified as HAWA (i.e. trading mat type) as the material is not buying and later selling as a same physical product like the retail store.
But it is buy and process it, and sell.
Please help shed some light for me. Thanks.
tuff

Hi we have not using SAP, it is a new project.
kindly please read my question carefully...
basically it is like this...
the chicken the restaurant chain purchased are later process into multiple meal dishes (i.e. Salad Chicken, Chicken with rice, Roast Chicken), and sell to customer directly.
Therefore, looking at your feedback, I can use the SEMI-FG material type for the Chicken for the buying, correct?
But this raise another question in which how do I track the goods issue quantity when the meal dishes is sold, so that my Chicken stock quantity can reflect correctly in the SAP system?
currently they are not using BOM as the franchise holder does not wish to disclose the meal ingredient scret (i.e BOM) to their invidual franchise store.
please advise. thanks
Thanks.
Tuff

What kind of log I can get with "level informational" - c2950 & 6500

Hello, everybody, It is nice to meet you. I am working in Tokyo in japan as network engineer.
It is my first time to write something on here Cisco Support Community and I don't speak English very well.
So I hope everyone understand my pour question and writing. But I wish somebody anwser to this question.
I am using kiwi sever to manage four of 6500 and about thirty of c2950.
The kiwi server is working normally logging both 6500's syslog and c2950's.
But I have question about difference between 6500's level informational and c2950's.
For example, When I log in 6500 I can get a log from my kiwi server.
And When I enter some command to change config I can also get a log from my kiwi server.
However When it come to c2950 I can't get the logs. I can only get logs that notice 'interface up/down' or 'changed config' stuff like that.
I think I have correct config about logging both 6500 and c2950 as follow.
Trap logging: level informational, OOOOO message lines logged
Logging to XX.XX.XX.XX, OOOOO message lines logged, xml disabled,
filtering disabled
Anybody know what kind of log I can get with "level informational" on c2950.
Thanks everybody.

Information is a fairly low severity which means you'll get everything except debugging messages. This includes link up/down, config change,
CPU hog, etc. If you're not seeing messages other than link up/down and config change, then there may not be anything else happening on the switch which triggers a log message. Check the output of "show log". That should agree with your syslog logs.

What kind of wireless mouse can I use?

Similar Messages

Maybe you are looking for