What Kinde of program should I use for mastering?

I had a litle problem with mastering my songs what I made with Logic Pro X is not enough laud. I need some help that what is a program to use mastering?

You can master your tracks in logic. Bounce the song and import into a fresh logic project, then just apply your mastering processes there. However, mastering is a task that does require a very special skill set and a very good listening environment. Just having the software doesn't make a good master.
Cheers,
Jazz

Similar Messages

What kind of motor should I use for lifting a heavy load?

I'm working on an automation application in which I need to control a lifting mechanism with heavy load (about 120 lbs). I will be getting constant temperature readings and based on that data I can determine the rate of change of the temperature. If the temperature rate is too fast then I need to be able to slow down the motor, if it is too slow then I need to speed it up. I'm looking for some support with choosing the right motor and hardware so that I have full speed control, while still being able to lift this heavy load, hold the load in a certain position, and then raise the load back to its original position. I was considering a stepper motor for this due to its ability to brake so the load can stabilize. Is this the right call or should I use a continuous servo? Where can I get such a stepper that can handle this type of load and has software that interfaces with LabVIEW? Would I be safe getting low-cost hardware for this application? Any guidance would be sincerely appreciated. Thanks.

Thanks for your replies to this topic. I just discovered the worm gear option yesterday while talking to a professor. I think that is the route we are going to take because the DC motor won't be as expensive as a high-torque stepper or servo. Also, I have three engineers that will be calculating the motor size based on gear reduction, spool size, cable length, and the load that we have to lift (which is about 120 lbs.). If any of you would like to suggest a motor size, that would be great too. I'm thinking something around 1HP should probably do it. My goal is to stay cost-effective while making an easy apparatus. I know that the worm gears may also be inefficient at times but it seems like the best solution for this application. Not to mention it's not to hard for our mechanical engineers here to make the spool and bearings. And I believe you can buy a DC motor that interfaces directly with a worm gear. However, a follow up question is what computer hardware do I need to control the voltage of the motor so I have speed control? Is this done through an RS232 board? My output from the LabVIEW program will be voltages, from which device is that binary signal converted into physical voltage? Thanks for your help so far.

What kind of analysis should i use for these signals?

i'm developing a lie detection system,i have one respiratory sensor and a hand grip heart rate monitor to acuire the physiological signals from the sensors.i have attached a screenshot of the application.the top signal represents the heart beat and bottom one is respiratory signals.my question is that what analysis mwthods should i be using for these signal types?would you please care to help me on this? thank you.

Thanks for your replies to this topic. I just discovered the worm gear option yesterday while talking to a professor. I think that is the route we are going to take because the DC motor won't be as expensive as a high-torque stepper or servo. Also, I have three engineers that will be calculating the motor size based on gear reduction, spool size, cable length, and the load that we have to lift (which is about 120 lbs.). If any of you would like to suggest a motor size, that would be great too. I'm thinking something around 1HP should probably do it. My goal is to stay cost-effective while making an easy apparatus. I know that the worm gears may also be inefficient at times but it seems like the best solution for this application. Not to mention it's not to hard for our mechanical engineers here to make the spool and bearings. And I believe you can buy a DC motor that interfaces directly with a worm gear. However, a follow up question is what computer hardware do I need to control the voltage of the motor so I have speed control? Is this done through an RS232 board? My output from the LabVIEW program will be voltages, from which device is that binary signal converted into physical voltage? Thanks for your help so far.

HT5299 What kind of cable should I use for movies on my macbook pro if I want to watch it on my 60 inch tv?

What kind of cable for my macbook pro, do I use to watch movies on my 60 inch tv ?

Which model MacBook Pro do you have (e.g., "15-inch Late 2011")?
Clinton

What word processing program should I use with my Mac, what word processing program should I use with my Mac, what word processing program should I use with my Mac

what word processing program should I use with my Mac?

steve359 wrote:
For free you can download NeoOffice
Not quite. Downloading the current version of NeoOffice is definitely not free (downloading the previous version is). The developers of NeoOffice (the most Mac-like of the StarOffice descendants) make a distinction between the application itself (which is free) and downloading it, for which they require what they are pleased to call a "donation" (since it's mandatory, I would call it a fee).
shldr2thewheel wrote:
I totally forget about TextEdit all the time..
Indeed. For basic WP tasks, TextEdit can be quite satisfactory.
embauerxz
I only need it for reports
Would that include the report on the state of the US economy -- you know, the one President Obama asked you to deliver to the White House no later than 7AM on January 4? The one in two columns, with numbered paragraphs, table of contents, footnotes, mathematical formulae, 40 figures, 60 charts, quotations in Arabic, Japanese, and classical Greek, and 15 pages of references in APA style?
Grant Bennet-Alder is right -- "the real answer depends on what work you expect to do with it, and with whom you expect to do this work". There are dozens of word processors for Mac, from the venerable Word to the no less venerable Tex-Edit+. It would pointless to start listing them all, when many of them might be either too little or too much for your needs.

What frame rate timeline should I use for 1080p 60fps premiere pro

When using 1080p 60fps clips what sequence should I use when creating a timeline that would work the best for slow mo application?
I read that you should use a 24 fps timeline but i'm not sure?
Also I have a few 720 @ 120 fps, should I create a separate sequence for that and what kind of timeline should I use since cs5 only has 1080 @ 60fps option?

24 is a good frame rate for most animations but some people like 30 and for the max stress on user systems and animation smoothness, use 60.

What word processing program should I purchase for iMac

What word processing program should I purchase for iMac

Hi
Pages is very good as a Word Processor but it lacks the ability to do Macros if you continually do a repeat operation. For me I cut and paste text from another source and it needs reformatting Font; bold, size, colour every time I do it. It is a real pest.
Many years ago Word Perfect Mac could do this [still the best wordprocessor interface] also [from memory] Apple Works had the ability to record macros.
A current MAC wordprocessor to look at which will do pretty much everything INCLUDING MACROS is Nisus Writer. Express version is $49, Pro version $79 and it has a free 15 day demo.
Cheers

What Monitor or Speaker do you use for Mastering?

Hi,
As a home studio owner, what Monitor or Speaker do you use for Mastering?

Unless you have acoustically correct room, you will always have problems with low bass. That's why you need a pair of headphones that can produce sounds from 5Hz to 25kHz. I have BeyerDynamic DT770's but there are lot of others good quality headphones when you use that Hz criteria.
I use Genelec 8040's which have enough dip switch settings to match it to the room. They are also quite small (metal enclosure walls are only couple mm thick) and since all the walls are round there are no resonances or standing waves inside the box. That means they will sound accurate even at louder mixing volumes.
Btw the reason NS10 were used years back, was that they mimicked the average crappy home speakers, but still had tightly aligned sound. My old studio manager blamed all the terrible 1980's records on them, which you can hear if you compare them to today's remastered versions.

What programs should I use for creating a children's ebook with animated illustration?

I'd like to create children's book for iPad with hand-drawn illustrations that are animated but in a simple way (like bubbles flying and popping). What programs should I use?
Thanks in advance,
Bibi

Impossible to answer, I’m afraid. There’s just not enough details here and the very fact that you’re asking tells me that you should be very careful in choosing how to get this project done.

What external Hard drive should I use for Final Cut Pro?

Hi:
I have a Mac Pro and I'm planning to work with HD. What external hard drive should I use?
PD: I have a NVIDIA on a PCI Express graphic slot.
Thanks,
Cabezon

You'll need to be much more specific; there are 20 or 60 different kinds of high definition. Some require nothing, some require superfast RAID, some require specialized hardware support.
bogiesan

My iMac was infected with a virus or malware the other night. I was told that I didn't have any firewall protection. How do I fix that? And what kind of software should I use to protect my computer from further attacks?

I am running OS X Version 10.9.5 on n iMac I brought in 2011. Had a virus or malware attack the other night and a window opened with a # to call for help. Didn't know if I should trust the # but ended up calling it anyway and paid to have them 'fix' things. Was told I didn't have firewall protection. Am not sure if I do now. [It still says to allow all incoming connections]. So what do I do now? And what kind of antivirus program is recommended?
Firewall

Read "Ransomware" web pages.
Assuming you let the scam outfit remotely control your Mac, the information on it can no longer be considered secure. Neither can the Mac itself. You should immediately shut it down and take actions to prevent or recover from identity theft, which is quite likely to have occurred. This means contacting the financial institutions and other companies that may permit access to your accounts using login names and passwords, canceling and replacing credit cards, and similar actions that only you can know.
Determine if you can contest the charge made to your credit card for this criminal transgression.
And what kind of antivirus program is recommended?
None. The Mac is highly secure against malware or virus intrusion, but nothing can prevent you from willfully installing dubious software or granting remote access to criminals. No "anti-virus" software in the world will protect you from that. The OS X application firewall is not intended to prevent this sort of occurrence.

Question About what Azure Services I should be using for mobile app with website.

Hello,
I am wondering what Azure service would be best for my new application. I need to have an SQL database that I can connect to and modify from both a website and a mobile app preferably WP8 and Android. I was not really understanding whether I would need a
mobile service or normal SQL database. Which should I use or am I completely off track?
Thanks,
Matthias

Mobile Services uses SQL Database, nothing special on that SQL Database, its just like any other "normal" SQL Database.
Mobile Services provides "back-end services" that simplifies accessing SQL Database, Notification services, authentication, etc...
Let's assume you don't use Mobile Services, to use SQL Database, you would need your app (both mobile and web) to connect to the database. In practice, you will not want to expose your SQL database directly, so you'd end-up writing some kind of a "facade"
that your app will access instead of directly connecting to the database.
Instead of writing that "facade", Mobile services provides that for you (you still have to write code though, but less than what you need to write if you're rolling your own).
Both your web app and mobile apps can share the same SQL database (pay attention to the mobile service schema).
To help you decide, ask yourself what other features will your mobile app require? Authentication? Notification? etc... are you prepared to write those on your own or use various libraries instead of one?

What external hdd bus should I use for FCP 7?

Howdy! My colleague and I are editing a film in FCP 7, and media handling has become somewhat, complicated, shall we say. So we decided that we're both going to buy external hard drives, and keep them in synch using something like Super Duper, or Carbon Copy Cloner. I've been doing some research, but I'm still unsure as to what connection I should use? We're both using MacBook Pro's with firewire 800 ports, and USB 2.0 ports (No thunderbolt). Since these drives are going to be used exclusivly for video and audio, how fast of a connection should we have so that the connection doesn't cause a bottle neck? I know that Sata III can do up to 6.0 Gb/s, but I also know that a hard drive can't utilize that much bandwidth. So will USB 2.0 slow it down, or would it be fast enough? Or should I opt for firewire 800?
This is the hard drive I'm looking at getting, and I'll put it in an external encloser:
http://http://www.newegg.com/Product/Product.aspx?Item=N82E16822145475&nm_mc=EMC -IGNEFL082611&cm_mmc=EMC-IGNEFL082611-_-EMC-082611-Index-_-InternalHardDrives-_- 22145475-L0B
Thanks!
Paul
P.S. is 5200rpm's enough, or should I get 7200rpm?

If you plan to use the drive for editing/rendering media files, you'll need a 7200rpm drive and a Firewire or eSATA connection.
If you're only using the drive for backup purposes or general data storage, USB and 5400rpm will work.
-DH

What kind of virus protection to use for

wondering what kind of virus protection would be able to use although that the I'Macs has Melware and also what kind of security system would go good with a time capsule?
thanks
Richard Descoteaux Jr.

Regarding the anti-virus software, see my Mac Malware Guide.
As for the security system for a Time Capsule, what kind of security system are you referring to? If you want your backups to be encrypted, see:
http://pondini.org/TM/31.html
If that's not it, you'll need to be more specific.

What kind of inforobject can be used for compounding while creating charac

Hi all :
     what kind of standard inforobject can be used for compounding while creating characteristic ?
    I found that some could be , but some couldn't , like 0RESP_PERS.
THE ERROR :
1      Characteristic 0RESP_PERS was included in the compounding for COS09 (-> Long Text)      QLong text exists
2              0RESP_PERS is just an attribute and is not allowed in the compounding No long text exists
0RESP_PERS is an object, why can't be used for compouning?
Could you please tell me why ?
   Thank you very much!
Edited by: jingying Sony on May 10, 2009 7:05 AM

Hi Jingying Sony,
One can mark an infoobject as an Attribute Only in the General tab.
This means that the infoobject will only act as an attribute and cannot be used as a characteristic in infocubes. Neither can it be used as a navigational attribute and I guess it may not be available for compounding then(since in compounding - it implicitly becomes a characteristic).
For your ref
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
If you uncheck this checkbox, then may be it will allow you to compound this characteristic..
You may try with a (self created) ZRESP_PERS reference chararacteristic of 0RESP_PERS, to confirm this.
One more link for your reference
http://jgtang82.javaeye.com/blog/191795
Hope this helps,
Best regards,
Sunmit.

What Kinde of program should I use for mastering?

Similar Messages

Maybe you are looking for