What level of clipping is acceptable on output1-2??
Hi all
Ive been told that even if your output 1-2 says its clipping, the actual sound might not be affected. I was told that you can go up to 6db over. Ive put a meter on the output1-2 and i got it to about 6 over. It sounds fine. Is this acceptable?
I make techno trance and NRG so i want the harshness anyway without the whole track distorting. I know some people in my music genre push the levels up a much as possible to get a real gritty sound. Should i just use my ears or is there a general rule on this?
The tracks these people have made sound awesome, so its gotta be ok to push the limit of the levels eh?
ta
digi
Is this acceptable?
For me? No, not at all.
If you are happy clipping your output by +6dB, then do it. (If you really must!)
However, you will generally get far more predictable and controlable results by using limiters to limit how you want below 0dBFS, while still giving you some room for reconstruction peaks - otherwise, you'll find that your horrendously clipped mix won't sound like you intend on some CD players - it will just be harsh digital noise...
I would never advocate mixing like this. First create a clean mix with plenty of headroom, so you always have it to go back to. Then do whatever limiting etc you want to create the final result. This gives you the best of everything, especially when you take it to the mastering engineer, who otherwise would take one listen to your horrendously clipped and unrecoverable mix and say "I can't do anything with that"...
Similar Messages
-
What levels of Acrobat are needed to use forms created in Acrobat Pro 9?
What levels of Acrobat are needed to use forms created in Acrobat Pro 9? I want to use my form as a job ticket but want to know what levels of adobe reader are needed for the end users to be able to fill out & submit the forms without any problems.
Reader 7 and higher should be able to fill out forms and submit if the pdf format allows Reader 7 to fill out the form. However, without problems is a different issue. Submission of forms via email is ALWAYS a problem. It is always better to post the form on a website and have the form filled out on the web and have the data stored or sent to a database for further action.
-
[AS3] how do i use this angle in another lower level movie clip?
i'm tryin to use an angle from one movie clips to be part of
an if statement in another lower level movie clip. my code is
probably ugly but here it is. thank you in advance for the
helpi need to learn how to declair a variable (like angle) in a
lower level movie clip to use it in other movie clips is this not
correct?
var angle:Number;
please help -
At what level do we get customisable avatars?
I like the customisable avatars that the experts are showing. What level do you have to reach to get that privilege?
Don - been on the same level for quite a while now. I'm on 600 points. I think on the old forum format, it was Level 2, but since the new format came up I'm on 3.
likeabird - I did have a photo in the profile and selected it, but I still was getting the currect avatar showing up on posts, so I deleted it. Is that where the image should be set? In the photos boxes? -
What level of access a DBA should have on production Environment
We are in the process of auditing
I want to know what level of acccess a DBA has on a production server..How about the Backups ONLINE/EXport backup? Which account should be used for those purposes...
Can i DBA login as SYSTEM or SYS user? or he should have separate account to do all the activities..
I am more on protecting the data from unauthorized user..Any standards followed for that
Best Regards
MaranHi Maran,
What level of access a DBA should have on production Environment
root
However, there have been cases of dishonest DBA's and SA, manipulating data for profit and stealing data:
http://www.dba-oracle.com/art_lumigent_whitepaper.htm
Kevin Mitnick, the noted computer felon likes to show how security breeches are commonly the result of employee errors. In his book “The Art of Deception”, Mitnick talks about his techniques to get trusting employees to disclose confidential information and privileged passwords. In one case Mitnick was able to secure a privileged password using the name Lemonjello, and then bragged about the naïve employee who handed-over a system password to someone called “Lemon Jell-O”. In this case the IT staff was never able to ascertain the root cause of the breech because their mechanism for the dissemination and auditing of secure information was inadequate.
Today, there are ways to seregate the audit trails, giving the DBA what they need to do their job, while not giving them the keys to the kingdom.
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm -
Up to what level abap devlopment is possible in SAP
hi
up to what level abap devlopment is possible in SAP.
thanks.Laxman,
May I know the context of your query.Why do you think beyond a particular point it will not be possible.
K.Kiran. -
How to know what level of optimization to use / which symbols to remove
I probably should have asked this question along time ago, but how do you know what level of optimization to use and what symbols you can safely remove when compiling
EDLundquist wrote:
I probably should have asked this question along time ago, but how do you know what level of optimization to use and what symbols you can safely remove when compiling
I have no direct experience with development for Macs, but based on my experience on other platforms, I'd use lower optimization and symbol removal early in the debugging process, increasing those as the program becomes more stable. -
What level of Elements will support Olympus OMD-M-5 Raw Files (.ORF) ??
What level of Elements will support Olympus OMD-M-5 Raw Files (.ORF) ??
Yes it is the OM-D E-M5 Newly purchased. Love the camera but don't like the Olympus software.
I have Elements 7, but have previously been a Canon user and have hitherto used Canon DPP software to process my CR2 Raw files. -
What level of disk shock protection is there in Portege R830
Folks,
I work in an area where there are lots of people who carry their Portege Laptops (mostly R830's) around while they're still on - mainly while they're moving from desks to meeting rooms etc, and often carrying them on an angle. I feel a bit silly because I insist on putting mine to sleep before I move it.
What level of disk shock protection is there in these laptops? Am I being paranoid or is everyone else inviting disaster?
Thanks,
YokkiHi
First of all its not really good for the HDD if the notebook would be moved while the HDD is in use in such case the HDD read/write head would be affected while carrying along but there is a software called Toshiba HDD protection which use an sensor built in the notebook. the HDD protection detects the vibrations and shocks and automatically moves the HDD head in a safe position to reduce the risk of damage caused by head to disk contact.
Here more details:
+What is TOSHIBA HDD Protection?+
https://aps2.toshiba-tro.de/kb0/FAQ2503AZ0000R01.htm -
Hi All
1.What is File clip in FDQM?
regards
SmileeThis terminology is not something that I am farmillar with.
Can you ask this person for further information? -
What level of Photoshop (Elements, Lightroom, CS6) would I need
We have 8" x 10" radiochromic film (like conventional x-ray film, except that it self develops without chemical solutions) that has a reflective backing built in (doubles the path length through the sensitive emulsion).
I want to do a reflective scan (very easy with VueScan) and then do two things to the resulting TIFF file:
1. Use a histogram to adjust the black and white levels to optimize contrast for the image.
2. Change the greyscale range to a color range using a linear transformation (i.e., 0 = black, goes to red; 255= white, goes to blue) for easier viewing .
What level of Photoshop (Elements, Lightroom, CS6) would I need to do this?
Thank youFor simple file manipulation Photoshop Elements would be enough and in your case the best.
-
What level should my computer speakers be set at?
What level should my computer speakers be set at while I edit in order so the final levels are good for DVD and Television sets?
The best method for monitoring audio is much like the best method for monitoring video; externally. I would not rely too much on your computer's speakers if you're hoping for accuracy.
It is highly recommended to monitor both video and audio on properly calibrated devices - a TV monitor for the video and nearfield or reference monitors for audio. Nearfield/reference monitor don't color the sound the way regular speaker do. And that's what you need in order to ensure the audio you're editing will sound as you actually want it to.
As for the speaker volume, it's just as important to watch the meters while listening. Average levels should be around -12db with peaks up to -6 or even as high as -3 if it's something that's supposed to be loud like a gunshot.
To calibrate the speakers (unscientifically), route the audio output from a TV with normal broadcast or cable channels to the speakers you'll be using. Set the speaker volume to what you consider to be a normal listening level while surfing the various channels. Once you've set the volume level, you'll know when editing that the audio levels you're outputting will be the proper volume for TV viewing.
-DH -
What level CSS and HTML for Dreamweaver CS5 (Vers 11.0)
What level CSS and HTML for DW CS5?
CS5 does not support HTML5 in this sense -
1. It will not automatically start a new document with an HTML5 doctype (you can force it to do this - if you are interested I can tell you how), but you can always just replace what CS5 writes with an HTML5 snippet.
2. It will not show any of the new HTML5 tags in any of your menus (or in code hints) - if you want to do HTML5 you are on your own with manual coding.
The same is true with CSS - if you want to do any of the advanced CSS styles (like animation, gradients, rounded corners, shadows, etc.) you are on your own. -
Dear SAP Gurus
I want to know at what levels these units are defined in Delivery ( header or item or both )
Plant
Shipping Point
Route
Shipping condition
storage Location
Storage Condition
Gross weight and net weight
Transportaton group
Warehouse
Inco terms
Please provide me better Insights on thisHi,
Please find the details below,
Plant - Header level
Shipping Point - Header level
Route - Header level
Shipping condition -Header level
storage Location - Item Level
Storage Condition - item level
Gross weight and net weight - Item level
Transportaton group - Header level
Warehouse - Item level
Inco terms - Header level
Regards,
Ravi Duggirala -
At what levels order can block through credit mgt
Hi,
At what levels order can block through credit mgtHi
We may need credit check at delivery level and PGI level because if the customer limit does not exceed at sales order level but at the time of delivery date and PGI date his credit limit exceeded then we can block doing delivering the stock or block PGI for that customer .
There are different scenario like,
1) If you want to credit management on delivery level then it usefull in tranpoter bill payment is pending or not how much amt is pending.
2) Also required on customer, if customer has not proper balance then you can use that.
Regards
raja
Maybe you are looking for
-
IPad Air's Wireless Disabled after upgrade to iOS 8.1.2
Guys.. anyone of you encountered that once your ipad air upgraded to iOS 8.1.2, the wireless is disabled and you can't enable it back????? i'm having this issue and now my ipad air can't use wireless. i have done everything including restoration at i
-
Hi, I have employee table, i need to show the details of employees who are working under a manager till this it ok,but i have one more conditon is that, if the manager has any sub mangers, i need to show the employees who are working under sub mangar
-
[SOLVED] Banshee does not play rtsp protocol
rtsp streams (radio station) does not work in the last version of banshee (1.5.1-1). in fact it worked fine in previous version. After launching banshee in the terminal there appears: [miguel@miguel ~]$ banshee-1 [Info 21:14:42.263] Running Banshee 1
-
BEFW11S4 reinstall cable issue
I had my laptop repaired and while I did this the modem died so after calling the cable company they told me to hook the desktop directly to the modem and the new modem works, now I have my Laptop back and tried to get a signal with the cable coming
-
Updation of Ztable clicking on submit button in adobe interactive forms
Hi all, In my adobe interactive form i have student details and one SUBMIT BUTTON.After clicking on that button i need to update the details in my Ztable. How Can I do?Where Can I write the code? Please reply me. Thanks in advance.