What licenses are needed to have CUCM not in demo but for LAB

I am trying to build a lab with new versions of CUCM 9.1
I do not want to use demo versions for 60 days nor request a temp license for 6 months.
what is the minimum licenses i will need to have CUCM in full production mode for Lab somulation and with the least cost?

Hi.
If you are a Cisco partner, you can obtain an NFR kit at a reasonable price.
Check the following link.
http://www.cisco.com/web/AP/partners/promotions/nfr/index_nz.html
HTH
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"

Similar Messages

What changes are needed to have iDS 5.1 support SHA instead of SSHA as the default ?

We have an application that ONLY supports SHA passwords
and when we upgraded from iDS 4.16 to iDS 5.1 it doesnt
work any more. Looking further, iDS 4.16 supported SHA
as the default for password storage and iDS 5.1 supports the more secure SSHA as its default.
Is there a way that we can specify what accounts use
SHA versus SSHA ? If not, how do you configure iDS 5.1
to support SHA as its default ?

Hello, I read your response and I have a slightly different problem. I have set up a LDAP on Iplanet 5.1 and imported users from our old 4.x directory. When I did this everyone was added with their existing SHA hashed password.
Now any new users that we have been adding have been loaded to the directory whit an SSHA hased password. This has caused a problem with some of our applications that require an SHA hashed password.
I know where I can reset the default password hashing for the LDAP, but is there a way I can convert the passwords for the few hundred users that we entered before figuring this out from the SSHA hashed password to the SHA hashed password? I tried to do this via an LDIF import and when the LDIF file contained a userpassword value that began with {SSHA}, that is the way it was imported.
Is there a way to have the IPlanet LDAP do this? Or write a simple program to do this? We don't want to have each one of these users have to enter a new password and then have the LDAP server encrypt it, we would rather just take the existing SSHA hashed password and convert it to an SHA hashed password. Is this possible?
Any help would be greatly appreciated.
Thanks

What steps are needed to download an older version of Firefox for testing an Oracle certified version?

I want to download an older version of Firefox for testing Oracle certified versions (for PeopleSoft PeopleTools). I found the directory of older versions but need instructions for the steps needed to download the desired version, which is version 17. Thank you for your help.

The latest Firefox 17 ESR ''(Extended Support Release)''' for Windows is available here: <br />
http://ftp.mozilla.org/pub/mozilla.org/firefox/releases/17.0.6esr/win32/en-US/
If you will be installing that version on a PC which already has a different version of Firefox installed, you will need to create a new Profile fir the ESR version. Let us know and we'll tell you how to create a new Profile.

How do i find out what computers are registered. I do not believe I have 5 computers registered

how do i find out what computers are registered. I do not believe I have 5 computers registered

If you mean which computers that your account is authorised on then you can't, you can only see the count.
Have you had other computers in the past and/or updated or reinstalled the OS on your current computers without deauthorising them ?
As you have 5 computers authorised then you can log into your account on a computer's iTunes via the Store > View Account menu option and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.

How do I determine what xtras are needed?

From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?

Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+

While doing ODI migration what things are needed to be setup in Topology?

While doing ODI migration what things are needed to be setup in Topology manager ?
1.Like in Toplogy in file we hive file paths.
2. In Planning we set Logical schema .
Not sure about other things.
Hoping some can can help!!!!!!!!!!!!!!!11

Lots of things are defined in the topology manager - below is a simplified list
1) Physiccal Schemas the actual connection information / details related to any technology you plan to use in your ODI integration interfaces
2) Logical schema, abstracted version of the Physical schema which allows greater flexibility ad reuse across environments
3) Contexts - how you asssociate logical and physical schemas
4) Agents - manage the execution of ODI jobs
When you talk about migration, do you mean moving ODI objects between seperate environments such as Dev and Prod? If so you will need to ensure that all the technologies you use in Dev are present in Prod. The physical layer has been set up with all the correct connection details. Your logical scemas has been set up matching your configuration in the dev environment and you have used the contexts to associate the logical and physical layers as per your dev configuration.

What commands are needed to configure authentication?

I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
Do I have to also use the 'ktpass' command, even though I'm using a Win client?
If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
What commands are needed in order to configure the server, and client, to authenticate successfully?
Cheers

Sorry, I haven't seen a nice JGSS for Windows guide yet.
Back to your questions:
1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
ktpass is used at the server side, what you use at client side is unrelated.
3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
6. What commands are needed in order to configure the server, and client, to authenticate successfully?
You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them.

What skills are needed to manage Exalogic?

Hi there
Please let me know if I should be directing this question to another Forum and which Forum it should be.
We are thinking of purchasing Exalogic with a view to having a private Cloud.
What skills are needed or teams in order to manage Exalogic in-house?
I've used google but not really found the answers other than a couple of Oracle docs which suggest sys admins teams, network teams, etc could all have a hand in the management as they currently exist.
However, Management are wondering if a new team needs to be formed and what skills that team should have.
As we already have Exadata under the DBA team they are wondering if the skills the DBAs have will also apply for Exalogic.
Thanks.

Others are welcome to jump in!
Thanks and stay tuned to for results next week<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/technology">The Technology HomePage</a> for tally and scores

What Licensing is needed

I can't get my head around what licensing is needed for Project in Office 365. I have four types of users. Tell me if I'm right:
1> Project Managers. They'll need Project Pro for 365 and Project Online.
2> Project Managers w/Project Pro already installed. They'll need Project Online
3> Executives (want reports, maybe some KPI stuff). They'll need SharePoint Online
4> Team members (just entering time/status) for their work. They'll need Project Lite
Is this correct?
Bob

Hi RLCoppedge,
3> - they will need Project Online.
Everything else is correct.
Ben Howard [MVP] | web |
blog |
book | P2O

What wires are needed to connect to a projector

What wires are needed to connect a macbook to a projector

A VGA or HDMI cable (Perferably HDMI). But you need mini-displayport connectors to the specific cables.

HT1386 Switching from a pc to a Mac. What steps are needed to get my iPhone and iPad to work with my new Mac?

What steps are needed when upgrading from a pc to a Mac?

Copy everything from your old computer to your new one.

What processors are compatible with my g62 note book?

what processors are compatible with my g62 note book?
product number: WY881EA#ABU
currently equiped with an intel pentium p6000 1.87GHz processor
i got caught out and bought a game that requires a 2.0 GHz processor and i really want to be able to play it
please get back soon.
thanks
This question was solved.
View Solution.

Hi,
Compatible processors for your notebook ( and the replacement procedure ) is detailed on Page 81 of your Maintenance & Service Guide.
Considering the speed of your current processor, it would look like the first Four are Ok - I would always recommend checking this with HP first before purchasing.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV-.

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV….

About AirPlay Mirroring in OS X Mountain Lion
You need:
An AirPlay-enabled device such as http://store.apple.com/us/ipod/ipod-accessories/apple-tv
A suitable TV monitor
A network
HDMI cable
A compatible Mac:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Or, depending on the model Mac you intend to use: a Thunderbolt or MiniDP or DVI to HDMI adapter for a wired connection to your TV or AVR

HT4970 I have chosen not to use iCloud for the time being, and cannot get the Reminders i input on my Mac to replicate to my iphone and iPad? any help is appreciated.

I have chosen not to use iCloud for the time being since the syncing was inconsistently working with the calender and contacts; and cannot get the Reminders on my Mac to sync/replicate onto my ios device, neither iphone nor ipad. Help is appreciated in respect to Reminders. Thank you.

ok, thanks. couple other questions...
1. will it sync to my reminders on my MAC too if i enter via icloud? if not, what's the reason for having the reminder list available on my Mac if it can't sync?
2. I have 2 different email accounts, one with a .mac address and another with .msn. both can be accessed via icloud. i ran a test using my msn acct as the signin and it logged the reminder onto both the iphone and ipad fine.
however, when i try with my mac address, it only shows up on my iphone, which list reminders under icloud(which worked on both devices and then under mac which worked only on the iphone, not ipad. any idea why that might be happening?
thanks for your help.

What do I need to do when sending my iPad in for warranty repair?

What do I need to do when sending my iPad in for warranty repair? I live too far away from an apple store so they told me to send it in using UPS but that's about all they told me. I have looked on the website but have found no additional information. What all do I need to do besides backing it up and what all do I need to send? Thanks in advance.

What to do when you return or send your iPhone, iPad, or iPod touch in for service
http://support.apple.com/kb/ht1438
7 Things to do before sending your iPhone or iPad for Repair
http://www.laptop-repair-manchester.co.uk/blog/7-things-to-do-before-sending-you r-iphone-or-ipad-for-repair/
 Cheers, Tom

What licenses are needed to have CUCM not in demo but for LAB

Similar Messages

Maybe you are looking for