What makes my iMac different? Part# MB323LL/A

I was curious what made this particular model of iMac different from the other 20" Alum. models?? I ask this because when I went to price some RAM memory on Crucial.com, they differentiated this model from the rest and recommended a different model of RAM for it. I did notice on the box that my machine what made in the USA.

Hi Timmeh: Yours is the most recent generation of iMac. It uses 800mHz RAM. All the previous Intel iMacs used 667mHz RAM.
Hope this helps
Stedman

Similar Messages

What makes my iMac slow, how to remove SIMBL

I already asked advice in this topic since I am wondering what is making my iMac so slow on startup and/or while changing user. I got a good hint from dominic23, thanks for that one. He advised me to get rid of SIMBL.
Now I have another problem. Can't remember that I've ever installed any SIMBL on my computer. Anyway, I could've done it and I tried to find that SIMBL to get rid of it. No success so far. Still, I ran the EtraCheck again and report says again that there is some SIMBL-thing running. Report is included to this message. Question now is, how or from where I can find this SIMBL.plist or what so ever it is that I can remove that one?
EtreCheck version: 2.1.8 (121)
Report generated 5. huhtikuuta 2015 17.55.53 UTC+3
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (21.5-inch, Mid 2011) (Technical Specifications)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 0/DIMM1
            Empty
        BANK 1/DIMM1
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 6750M - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 0:15:13
Disk Information: ℹ️
    ST3500418AS disk0 : (500,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (414.76 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (4.2) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.devguru.driver.SamsungComposite (1.4.20 - SDK 10.6) [Click for support]
    [not loaded]    com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
        /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
    [not loaded]    com.devguru.driver.SamsungACMControl (1.4.20 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungACMData (1.4.20 - SDK 10.6) [Click for support]
    [not loaded]    com.devguru.driver.SamsungMTP (1.4.20 - SDK 10.5) [Click for support]
    [not loaded]    com.devguru.driver.SamsungSerial (1.4.20 - SDK 10.6) [Click for support]
Launch Agents: ℹ️
    [unknown]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [unknown]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [loaded]    com.timesoftware.timemachineeditor.backup-auto.plist [Click for support]
    [loaded]    com.timesoftware.timemachineeditor.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
    [failed]    ws.agile.1PasswordAgent.plist [Click for support] [Click for details]
User Login Items: ℹ️
    None
Internet Plug-ins: ℹ️
    Flip4Mac WMV Plugin: Version: 2.3.4.1 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    OfficeLiveBrowserPlugin: Version: 12.3.4 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: Unknown
Safari Extensions: ℹ️
    AdBlock
    Video Converter
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 84.48 GB
    Destinations:
        Varmuuskopio [Local]
        Total size: 333.40 GB
        Total number of backups: 158
        Oldest backup: 2012-08-17 22:31:14 +0000
        Last backup: 2015-04-05 06:32:18 +0000
        Size of backup disk: Adequate
            Backup size 333.40 GB > (Disk used 84.48 GB X 3)
Top Processes by CPU: ℹ️
         3%    Safari
         2%    WindowServer
         0%    hidd
         0%    AppleSpell
         0%    ps
Top Processes by Memory: ℹ️
    425 MB    Safari
    153 MB    com.apple.WebKit.WebContent
    146 MB    Finder
    77 MB    mds_stores
    64 MB    WindowServer
Virtual Memory Information: ℹ️
    148 MB    Free RAM
    1.47 GB    Active RAM
    1.32 GB    Inactive RAM
    858 MB    Wired RAM
    2.11 GB    Page-ins
    10 MB    Page-outs
Diagnostics Information: ℹ️
    Apr 5, 2015, 05:38:21 PM    Self test - passed
    Apr 5, 2015, 10:20:20 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-04-05-102020_[reda cted].crash

To get rid of SIMBL one method is to dDownload and run Find Any File to search for a file with "SIMBL" in the file name.
FAF can search areas that Spotlight can't like invisible folders, system folders and packages. The more important item to remove is a folder titled SIMBL in either the Home/Library/Applications Support folder of the HD/Library/Applications Support folder.
I use SIMBL for a dock altering application and here's what is on my hard drive:
Any file you want to remove you can do so by dragging from the search results window to the Trash in the Dock.

What make's java different from other kinds of programming?![/b]

How is it different from the other programs like the turbo programming and all those other stuff?!

you jut can't copare Java to every other programming language. each language are designed differently. an answer to your question ccould well be 100,000+ pages (single space). There are many programming languages..most of which..you and i have never heard of.
Many programming languages are created to target a specific domain (intentionally or unintentionally).
1. procedural language (c, c++, fortran, basic, pascal)
2. object oriented (java, small talk, c#, c++) - although c++ and Java are hybrid
3. metalanguage (HTML)
4. recursive (ML)
5. logic (Prolog)
6. forgot the category) (Schema, LiSP)
Shema and Lisp are more suited for writing artifical inteligence. Java is more toward solving buisness problem. Choosing the right language culd means ease of development and saving in cost, and possibly performance.

What makes these products so expensive?

1200 for a laptop? for that you could buy a pc with more features. what makes a mac different than a pc other than a mac does not get viruses?

high.quality.5000 wrote:
for about $600 to $900 you can buy a pc with high quality audio and video cards. i dont understand OSX i like that its only $30 but whats good about it?
See for yourself!

I am making multiple DVD's of roughly 50 hours of footage on DVD Studio pro with 4 separate menus for 4 different 'parts' or series if you will. 50 hours - 20 episodes - 4 parts of 5 episodes each. What are my options in terms of burning these parts on to

I am making multiple DVD's of roughly 50 hours of footage on DVD Studio pro with 4 separate menus for 4 different 'parts' or series if you will. 50 hours - 20 episodes - 4 parts of 5 episodes each. What are my options in terms of burning these parts on to separate DVD's, what is the process, what size DVD RW should I buy, what bitrate should I use, and what quality I should expect for the burn. Any advice or insight is welcome.

>>What are my options in terms of burning these parts on to separate DVD's<<
20 episodes totaling 50 hours equals about 2.5 hours per episode assuming all episodes have the same duration. Fitting 2.5 hours onto one single layer DVD would require a low bit rate which means quality wouldn't be anywhere near best, but that's a judgement call you'll have to make based on several factors. For example; if there is not much motion in the video (talking heads, etc), you can get by with a lower bit rate and may not notice any quality difference.
>>what is the process>>
The process is essentially the same as it is when authoring a regular DVD with 2 hours or less of content. However, with as many discs as you'd need to complete this "set," you'll need to create a separate DVD Studio Project for each disc. Basically, you'd use one of Compressor's DVD Presets (or customize a preset) to create an MPEG--2 video file (.m2v) and a Dolby Digital audio file (.AC3). Import both of those assets into your DVD Studio Pro project for authoring and burning.
If you want to keep one episode per disc, DVD Studio Pro does have a 150 minute preset or you could use dual-layer discs with a higher bit rate for better quality. Again; your call.
>>what size DVD RW should I buy<<
Size? 12cm. Capacity? Single layer, single sided DVD discs (DVD-5) have a rated capacity of 4.7Gb (4.37Gb actual), including menus. If you use single layer discs and want to keep the quality reasonably good, you'd need at least 50 discs to complete this "set" with each disc holding roughly 2 hours of footage if you keep the menu on each disc simple. Or, you could use dual-layer discs (DVD-9) which have a capacity of about 7.95Gb - almost doubling the recordable capacity. There are also dual-sided, dual-layer discs available (DVD-18) but they are relatively expensive and have to be manually turned over to continue playback ... but they do have roughly 15.9Gb capacity.
>>what bitrate should I use, and what quality I should expect for the burn<<
Exactly; the quality is dependent on the bit rate chosen, as well as the quality of the compression. Using compression markers where needed can greatly increase the quality of playback but will most likely increase the file size of the compressed video. For the best quality, keeping the bit rate as high as possible allowed under the DVD specification will yield the best quality but some DVD players may choke if the bit rate is too high. For best quality I typically aim for a bit rate around 7.6 to 8.0Mbps but that will only allow about one hour of footage.
Naturally, if you decrease the bit rate, you can fit more footage onto the disc but quality will be sacraficed.   Here's a chart approximating DVD bit rates and durations for single layer discs (does not include space for menus):
3.5Mbps - 120 minutes
5.0Mbps -   95 minutes
6.0Mbps -   82 minutes
7.6Mbps -   65 minutes
8.0Mbps -   60 minutes
-DH

What do I need to make my iMac + xbox 360 hook up to my current router

I need to find a way to make my iMac wireless and don't know what would be best for my set up. I have cable broadband through a rca router, which then hooks up to my vonage phone device, which then connects to my linksys WRT150N which has an emachines pc through ethernet and a sony laptop wireless connected to it. I want the iMac, which is downstairs to be hooked up to the internet wirelessly if possible and my son also has a wireless adapter for his XBOX 360 that he wants to use as well. I know this sounds tres' complicated and I have given lots of information here but if anyone knows what I should get for this situation, I would be most appreciative! Airport of some sort? Third party stuff that's compatible? I am so confused!
Message was edited by: Samiskins

Achieving data rates of 54 Mbps requires that all users have an AirPort Extreme Card and connect to an AirPort Extreme Base Station. If a user of a Wi-Fi Certified 802.11b product joins the network, that user will get up to 11 Mbps and AirPort Extreme users will get less than 54 Mbps. Actual speed will vary based on range, connection rate, site conditions, size of network and other factors.
imac specification I am guessing your imac g4 is usb 2 and requires an airport extreme wireless card.
The xbox360 wireless adaptor should be able to connect to your router.
To enable the imac to stream photos, movies, music to xbox360 you'll need a piece of software called Connect360. you get that here: http://www.nullriver.com/products/connect360
I'll give you my network setup if yours fails.
Two Apple Extreme N routers, First router hardwired to cable modem and the "bridged" second apple router. The first router also has a HP laserjet 24/7 connected to its usb port and one more hardwire to a pc laptor downstairs(no wireless card in the piece of crap windows machine). Second router hard waired to Vonage and an Apple Express router which I set up to create its own network. The xbox360 upstairs wirelessly connects to the Apple Express. I also have apple TV wireless to first apple Extreme router. Everything works fine and network is extremely fast.

What makes my new iMac bog down?

What would make my iMac (bought in Nov) get slow in refreshing Web site pages or in going to a particular question on this forum. It just spins and spins and goes nowhere.

Hello,
"What would make my iMac (bought in Nov) get slow in refreshing Web site pages or in going to a particular question on this forum. It just spins and spins and goes nowhere."
I assume you are referring to your Safari browser? If so, try changing your DNS:
Try putting these numbers in System Preferencds/Network/Advanced/TCP/DNS. Add the numbers in the window on the left.
208.67.222.222
208.67.220.220
Click Apply. These are safer/faster than most ISP's NDS numbers, and have been patched against DNS poisoning.
You can clear out caches by doing this: In Safari, from the Menu Bar, select Safari/Reset Safari.
Check these boxes: Clear History
Empty the Cache
Remove all cookies
Remove all website icons
Click: Reset.
Carolyn

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

What makes a ten year old iMac run slow?

what makes a 8 year old iMac run slow? Its 2.16 ghz intel core 2 duo processor Memory 2gb 667 mhx ddr2 sdram

What Mac OS are you running?
See if any of these items apply:
1) Are you running any anti-virus/internet security applications?
2) Are you running any "cleaning/tune-up/optimizations" applications?
3) Any peer-to-peer or torrent downloading software?
4) Any third-party disk backup software that came bundled with an external hard drive?
5) Any online backup scheme other than iCloud (Carbonite; GoogleDrive; MS One Drive)?
6) Did your financial institution ask you to install Trusteer EndPoint Protection (also known as Trusteer Rapport)?
An overly full hard drive can slow things down, too, especially in a computer with only 2GB RAM.

How to select different parts of the text? cmd button no longer does that...

After installing Maverics i can no longer propertly edit my work as I cannot mark different parts of text using cmd button. Shift works as before for highlighting all the text from starting point to selected point but I can no longer use cmd to highlight different areas of the text. Is this an OS bug? Or was the button for selecting different parts of the text changed? I tried everything...

It's just a small part of what makes Pages 5 so "stunning" (Apple's word). You think stripping out the nifty ability to mark non-contiguous passages of text was neat? Sure that was nice. But Apple has gotten rid of more, so much more. And for free!
Just wait till you put the product through its paces and you discover other nice features that are missing, such as (but not limited to):
- no linking of text boxes! Yes, that's right. Now a newsletter that had a "continued on page 6" or whatever will be broken by Pages 5. Stunning! (Even more stunning, Pages 5 will strip out all sorts of formatting from documents created with Pages 4.3 and it will do ao without warning and will save the document in a NEW unified file format so that it cannot be opened by Pages 4.3, thereby potentially losing users hours and hours of work. Stunning!
There's more!
- Pages 5 has no mail merge, no bookmarks, no images in headers/footers! Pages 4.3 has those features, but this stunning new release removes them.
- Pages 5 features vastly reduced and simplified set of templates (there used to be about 130 Apple-cupplied templates, now there are about 60).
- Page 5 also boasts NO RTF SUPPORT, so a paper your wrote with Apple's own TextEdit is not natively readable with Pages: Stunning!
- No detail was too small to omit in this stunning new release: the vertical ruler, so you can easily place text or an obejct at a certain place in a document: gone! Setting the default zoom: gone! Status bar reproting word count and pagecount (e.g., Page 4 of 48): Gone! View comments in the left side bar: Gone! Autocapitalization: Gone! Search & Replace: drastically simplified!
But here's the really good news: Pages 5 is just PERFECT for creating a one page-poster advertising a new concert by Apple employee Eddie Cue. What's more you can collaborate on it with someone else, even if they're using a PC. Now that's "stunning"!

Adobe Acrobat Standard 9.0- 2 different part numbers?

I see two different part numbes while shopping for Adobe Acrobat Standard 9.0. 22002418 and 22002420. Does anyone know the difference?

I don't know about the numbers, though it appears to be related to specific versions. For instance, you have a full retail version and an OEM version with the same number (only OEM added). There is a DVD version supposedly. What raises flags for me are the Retail versus 1 user versions. As far as I know, all versions are 1 user unless you are purchasing a volume license. The other flag is the sale of the OEM version on line. That is not consistent with the OEM process. You may be able to purchase a legit copy at this location, but you are taking a risk. The site looks perfectly legit, but most bogus sites do. Good luck in whatever decision you make.

How to use "User Events" in different parts of an application

Hi,
"You programmatically can create and name your own events, called user events, to carry user-defined data. Like queues and notifiers, user events allow different parts of an application to communicate asynchronously. You can handle both user interface and programmatically generated user events in the same Event structure."
What you read was part of labview 7.1 user manual ( Chapter 9 - pg.12 ). I've some problems with the underlined sentence. I hope someone can help me.
When using Queues, the programmer may use a named queue everywhere in the application. there is no need to wire queue reference among VIs or using global variables to store queue reference. the name of the queue will be all that you need. I wonder if it is also possible with a event refnum that is the output of "Register for Event" node. As far as I've tested. the answer is Negative! I tried to copy-paste refnum in front panels and using the same name. but there is no connection between event refnums.
LV User manual claims that user events can be used like queues, but it doesn't seem so.
Does anybody have an idea?
Best Regards.

I didn't look at Damien Gray's presentation recently, but if I remember it correctly, it is on a much higher level than what I meant, because it refers to LARGE application. This is a very simple one.
Using a functional global is not problematic CPU-wise, nor memory wise (unless you get into really big data structures, like hundreds of MBs), so you shouldn't be afraid to use it. I'm also not sure why you're afraid of the loop. The loop is only there to "hold" the USR. It only runs once. If you want, you can replace it with a for loop that runs once. I've recently learned that apparently, you can also get rid of the loop and use a local variable (look at the example called XY chart) instead of a USR. I don't think a local variable should have any more impact than a USR, but that needs to be tested. It can definitely be more convenient for some VIs where you don't have to wire the SR through the entire VI.
Anyway, you will need to have an "obtain ref" VI which will hold a 1D array of names and a corresponding array of refs. Then, you search the array for the name, and if it finds the name, it extracts the correct reference. You will also need a way to input references and names into the array and possibly a way to empty the array. You may need to have 2 levels - the inner VI will be the LV2 VI and the parent will be the obtain ref\fill array\close VI. You will need some error handling as well - what happens if you search for a name and it can't be found and so on...
Hope this helps.
Try to take over the world!

What is the proper AppleCare part number...

...for the original 11" MBA?
I have the option to purchase 2 different part numbers that are both for MB, MBA and 13" MBP. One is less expensive than the other. I can't seem to find any part number beyond the current one sold in the Apple Store. The part number in question is MC246LL/B. Anyone?

Hi:
I can't find any specs on your notebook to pinpoint the motherboard you need.
Below is the link to the service manual for your notebook series.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
See chapter 3, pages 22 and 23.
If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
Paul

When I open a pdf, it used to open in Preview. Now my iMac requires Adobe Reader, but I prefer Preview. How can I make my iMac open pdf in Preview again?

When I open a pdf, it used to open in Preview. Now my iMac requires Adobe Reader, but I prefer Preview. How can I make my iMac open pdf in Preview again?

If an image opens in a different application but you want it to always open in Preview when you double-click it, do this one time: Control-click the file, let go of the Control key, press the Option key, then choose Always Open With > Preview. Or, select the image file, choose Get Info from the File menu, then change the "Opens with:" pop-up menu choice to Preview.
Mac Basics: Preview app views and edits PDFs and images

Where do I place the different parts of the HTML 5 published files on a web page?

I recently published an HTML 5 canvas document from Flash. Once the files are published where do they go on a web page? For example, lets say I had 3 animations published from Flash as HTML canvas objects. The files go on different parts of page, let's say in 3 different places in the body. Flash outputs the HTML file, JavaScript file, and whatever images in an 'images' folder. I'm not sure where I would place all these files on my web site. I know the JavaScript goes in the head of the index page. However, where do the other parts go? Further, if I have multiple HTML canvas objects how do I separate the code.
All of the tutorials demonstrate how to publish the file, but give no assistance on how to place the file or files on a web page.
Below is example code from a sample files:
<html>
<head>
<meta charset="UTF-8">
<title>HeadSpinning</title>
<script src="http://code.createjs.com/easeljs-0.7.1.min.js"></script>
<script src="http://code.createjs.com/tweenjs-0.5.1.min.js"></script>
<script src="http://code.createjs.com/movieclip-0.7.1.min.js"></script>
<script src="http://code.createjs.com/preloadjs-0.4.1.min.js"></script>
<script src="HeadSpinning.js"></script>
<script>
var canvas, stage, exportRoot;
function init() {
    canvas = document.getElementById("canvas");
    images = images||{};
    var loader = new createjs.LoadQueue(false);
    loader.addEventListener("fileload", handleFileLoad);
    loader.addEventListener("complete", handleComplete);
    loader.loadManifest(lib.properties.manifest);
function handleFileLoad(evt) {
    if (evt.item.type == "image") { images[evt.item.id] = evt.result; }
function handleComplete() {
    exportRoot = new lib.HeadSpinning();
    stage = new createjs.Stage(canvas);
    stage.addChild(exportRoot);
    stage.update();
    createjs.Ticker.setFPS(lib.properties.fps);
    createjs.Ticker.addEventListener("tick", stage);
</script>
</head>
<body onload="init();" style="background-color:#D4D4D4">
    <canvas id="canvas" width="615" height="400" style="background-color:#FFFFFF"></canvas>
</body>
</html>

All of the sections marked with the <script> tags should go in the head of the About page. From this line: <body onload="init();" style="background-color:#D4D4D4">, you want to take the onload="init();" part and add it to the <body> tag of the About page. You can also add the background color if you want.
The part marked with the <canvas> tag is the part that need to be added to the body of the About page. I don't know what your About page contains, so I can't tell you where it should be placed.

What makes my iMac different? Part# MB323LL/A

Similar Messages

Maybe you are looking for