What manufacturers' model numbers are the best UPS's ?...

a. Best UPS's.
What manufacturers' model numbers are the best UPS's uninterruptible power supplies for iMac Apple computers?...
b. UPS's. Best buys.
What manufacturers' model numbers are the best buys for savings on UPS's uninterruptible power supplies for iMac Apple computers?...

That is a very difficult one to answer because everyone has different needs. I would recommend APC branded UPS's, they have a tool that can help you select which model is best for you.
The URL for that site is:
http://www.apc.com/template/countryselection.cfm?ref_url=/tools/upsselector/index.cfm
Regards,
Roger

Similar Messages

I want to updating my IOS on my iPad..What Version of IOS are the best on my iPad?

i want it to update my IOS on my iPad..what is the best Version of IOS for my iPad?

The only version that you can update to is the current version i.e. 8.3 - unless your iPad is the first gen in which case it only supports up to iOS 5.1.1
Is there anything in iOS 8.3 that you need, or any apps that require a higher iOS version than you currently have on your iPad that you'd like to install ?

What are the best printers to use?

I bought a HP Officejet 4500 but it's not even showing up during the installation. What printer/scanner/faxes are the best for my MacBook Pro 10.6.8?

We currently own a HP Deskjet 3054 and Laserjet CP1525nw, both are great printers. The Laserjet is both AirPrint and ePrint ready, two features I looked for when buying a new Color Laser to replace my last one. ePrint is a very handy feature for me, I can print things without having to be home. Both offer driver support through Apple directly via Software Update, no need to use HP.com sourced drivers. Anecdotally, I print a LOT of meaty PDF documents and the ability to upgrade the internal RAM on the printer was something I also looked for (speeds up print times dramatically). For $10, I was able to upgrade the internal RAM to 384MB from 128MB with a 256MB DIMM. Laserjet RAM is keyed specifically for the Laserjet, you can't use a standard SO-DIMM. However, it's very cheap and can be found quite easily online.
Contrary to most of the above comments, we have not had any issues with either of our HP printers, or any other HP printers we have owned. My last BubbleJet and also favorite brand is Epson. I donated my Stylus CX7400 after several years of use (mainly college). It was a solid printer as well, I loved printing photos on it. (The Deskjet does a good job). Epson inks look great but (personal opinion) I think the HP inks tend to look more vibrant. My wife has a Brother laser printer at her work that has performed great for the past few years.
The worst printer I have ever owned was my last Color Laser printer made by Samsung, the CLP-315W. It failed outright after three years of light use. The Brother has gotten moderate-to-heavy use (school classroom) for several years now, hasn't skipped a beat. As a printer, Samsung has to be the worst possible brand I've ever owned.
Hope that helps!

What models of iPhone 6 are the best? The one you buy in America with LL/A model number or the ones in Europe?

I got a friend who bought and iPhone in europe and he keeps saying that he made a mistake because the ones with factory unlocks in USA with LL/A model numbers are better ....?!?! Is this true?

@Angel1992
It sounds like you friend feels the one in the Europe is locked and the one purchased in the United States is unlock. Well depends how you buy your unit? Is he planning to purchase and unlock iphone or carrier locked iphone?
Many of my friends, from England, visit NYC to go shopping for their idevices. Why?
- Is cheaper vs europe pricing
- they can get an purchase an unlock idevice issue free as long they willing to pay full retail price.
The question are willing to go that far to purchase anything overseas?
Do the math: travel, currency exchange, hotel cost, flights, food and waiting on line to get unlock iphone 6. Is really worth it? Some people will have different answers to this question. Your answer will be unique.
Cheers!

What are the best asset formats to optimise DVD quality?

Hi Guys
Some of my clients have been complaining about the DVD quality they received from me, and I wondered to myself how can I improve in future.
I just want to confirm if these are the best formats for each asset:
1) Video - AVI format (as opposed to MPEG2)? The major irritation I find about AVI is that it eats up lots of disc space, and it takes a lot of time as far as transcoding in encore is concerned.
2) Photos - TIFF format (as opposed to JPEG)? Same story as above regarding disc space.
3) Audio - AIFF format (as opposed to MP3)? Same space problem as the first 2. Furthermore, my major annoyance with WAV files is that you have to know which version of WAV files are the best quality.
Now, I do not what TVs most of my past and future clients own, i.e. a normal 4:3 TV like mine or the 16:9 plasma ones (although the trend these days seem to be LCD TVs). What is the best aspect ratio to use that will work on most TVs?
Also, I use a Sony 30g HDD video camera to record events. I like it since these is no hassle about carrying tapes or DVDs around. But, the problem with the camera is that MPEG2 is the "highest quality" it can record events; my still camera can take jpeg's as the highest quality. And the photos on the DVD look - most of the time - OK in terms of quality. It's only in my last DVD that I built that I saw some of the photos having some sort of problem in the slideshow (something like a water effect on the blazers and shirts of some of the audience - definitely unwanted).
To edit my assets, I use:
1) Power director 6 (for my video). I know you are going to say I should use Premiere Pro. I'm still reading the manual for PPro2 and Ppro doesn't have SVRT like PD6 does.
2) Photoshop elements or Fireworks (for my photos). Photoshop CS2 looks very complex for me at the moment - will learn later.
3) Adobe Audition (for my audio).
All I want is to have the highest quality possible. What's the best advice?
Thanks for all your help guys.

Since you raised the question of Hi8 versus DV tape formats, here are a few thoughts intended partly for you and partly for those who (unlike you) may be planning to get their first camcorder and are wondering about the different formats available.
Hi8 is a second-generation analog format that was marketed starting about 1988 to permit better resolution than the original VHS and Video8 camcorder formats. It was superseded about 1995 by the digital video, or DV, format.
Hi8 produced video of decent quality and was a good capture medium for material that was going to be distributed on VHS or SVHS tape. But the quality of DV is better, and DV has enormous advantages for editing and distribution. In particular, DV has absolutely no "generation loss" when transferring from tape to computer, from tape to tape, or from computer to tape, and it permits sophisticated editing using any one of many "nonlinear editing" applications that are available on PC's or Macs. Once you have edited your video using one of these applications, you may proceed to "author" your DVD's (i.e. add menus, etc.) and they will be of surprisingly high quality.
In mentioning Hi8 you may actually have been thinking of the Digital8 format. This is a format developed by Sony as a bridge between the older Video8/Hi8 world and the DV world. It is logically identical to DV but it uses the same physical tape as Hi8. This tape is now customarily labelled "Hi8/Digital8" to emphasize this fact. Hi8/Digital8 tape is less expensive and reportedly more robust than DV tape.
In principle Digital8 is just as good a format as DV. However, Digital8 has been targeted at a lower end of the market than DV, so even the best Digital8 camcorders may not have as good optics, as good sensors, or as many features as the better DV camcorders.
A few years ago, many people would recommend Digital8 as a very practical format for someone just getting started in video, since it was available at lower price points than DV, was identical in quality as regards format and perhaps better in value as regards camcorders, i.e. Digital8 camcorders were less expensive than DV camcorders of the same quality. Above all, Digital8 was ideal for someone who had previously used Video8 or Hi8, since the early Digital 8 camcorders would play back analog tapes and so could bridge the transition to digital. In fact, by buying or borrowing a second Digital8 camcorder, you could play back your analog tapes from one camcorder and record them as digital tapes using the other camcorder, forever after enjoying the advantages of the digital format.
At the present time, however, DV would be a much better choice than Digital8. Most (or all?) recent Digital8 camcorders have abandoned the ability to play back analog tapes. Only one or two manufacturers are making Digital8, and their offerings have dropped to a handful in recent years. This hardware will quite likely cease to be available in the near future, though the tapes will probably be marketed for years. When your present equipment wears out you would not want to be left with a library of family videos in an unsupported physical format.
In the last few years the DV format itself has been superseded by various high-definition formats, especially by HDV, a format that records to the same physical tapes as DV, at the same bitrates as DV, but, thanks to much greater compression, with twice the horizontal and more than twice the vertical resolution of DV.
Another format using even greater and more sophisticated compression, AVCHD, promises similar quality as HDV with even greater horizontal resolution, although the implementations of AVCHD available now are probably not as high in quality as the best HDV, and are certainly much harder to edit.
Despite the emergence of high-definition formats, there are good reasons for some people to prefer standard-definition DV at this time. One reason is cost. A good HDV camcorder -- the Canon HV20 is probably the best consumer model right now -- is likely to cost $1,000 or a bit more, while good DV models cost a few hundred. A second reason is low-light capability. The imaging chips for high-definition have many more pixels than the chips for DV. If the lenses are the same size, then these pixels must be crowded into a sensor about the same size as that of a DV camera, meaning that each pixel must be smaller and therefore less responsive to low-light conditions. So a good DV camera may be much better in low light than even the best high-definition camcorder of the same size.
Camcorders are now available that record direct to DVD (NOT advisable as John Smith said: the DVD medium is not robust for long-term storage and the necessary MPEG2 compression robs your source video of the quality it would have on tape and is much harder to edit).
Camcorders are also available that record directly to hard disk. Depending on the implementation, and your handiness with computers, thes might be just right FOR SOME USES. In particular they permit much more rapid turnaround between shooting and editing, so they might be right for something that is needed quickly but where archiving is not important (for example, shots of a football team at practice). But (as you have undoubtedly discovered with your 30gig Sony) you must download the material from camera to hard drive when the camera fills up, and this is not as easy as putting in a new tape. Also, the file may not be stored on disk in the relatively uncompressed, and easily edited, DV format. Finally, no hard drive is as safe a storage medium as a tape. With a hard drive and especially with a DVD, you risk losing everything to a crash or scratch; with a tape, you risk at most losing a few frames to a dropout caused by imperfections in the media.
Only you can balance all these factors knowing the type of things you will be shooting, how you will view or share your videos, and what you plan to do with them in the future. Note that DV can be edited together with HDV by many editing programs, though either the quality or the size on screen or both will be noticeably different. Also note that the high-definition formats are all in the widescreen 16:9 aspect ratio, like the newer TV's, while DV was originally 4:3 and may be available in 16:9 but with the additional width achieved by stretching the same number of pixels and possibly by using a smaller fraction of the imaging chip.
I would recommend that you search for articles and forums about camcorders to learn what is available. There is a lot of information out there. As for me, I would certainly not recommend Hi8, or even Digital8, at this time. Choose DV if you have a pressing reason for it, such as cost or the need to get good images in low light; otherwise make yourself more future proof with HDV or AVCHD. They will produce high-quality DVD's when "downconverted" when capturing them into the computer or when exporting them from the nonlinear editor or authoring program (experiment to find which method is best). Unless you are using AVCHD, which is not a tape-based format, stick with tape (for now) if you are concerned with long-term storage.
Best wishes!

What are the best UK sites for buying more memory for iMac?

Here is the info on my current imac:
Mac OS X version 10.5.8
Processor: 2.4 GHz Intel Core 2 Duo
Memory: 1 GB 667 MHz DDR2 SDRAM
Model Identifier: iMac7,1
I want to get myself more memory for my type of imac, like 6GB worth. I want to buy from a UK website so I only have to pay minimal postage fees. What are the best sites for this?

Crucial:
http://www.crucial.com/uk/
Lifetime warranty, very reliable, fast service and very helpful.
(No, I don't work for them!)

What are the best archiving methods for small colleges?

Hi Folks,
Im thinking a few terabyte hard drives will be my best option for a hundred dollars each.
We have a small operation here at a New England college with two editing systems that get a good amount of student use and use by myself for college needs. Some of the student work will get deleted at the end of each semester, but I need to save all the college's video.
What are the best ways to archive? Some of my concerns are cost and space. I can afford a few externals, do any of you have a nice cheap solution?
I understand if I am to go the route of archiving on externals I should have a backup of my backup, do any of you guys have any feedback on ghosting your backups, is that common?
thanks
Mike

If it's JUST for backup (not operation), you can get bare drives and either an enclosure for 1 or 2 drives with no tools trays (like the ones from Sansdigital: about $120 for a 1 drive enclosure) or a device like the UltraDock from Wiebetech (I use the latter). Physically install (or connect in the case of Ultradock) a bare SATA II 3.5" drive, connect it via USB 2, Firewire, esata, initialize/erase it, and then copy your files.
Then store the drive carefully in the foil anti-static bag it came in a dry location where it won't get jostled about by errant students (or kids in my house).
The savings in not getting full drive enclosures in the cost of multiple power supplies and interfaces. You pay for that once with the mountable enclosure / drivedock, and thereafter, just buy bare drives.
I also like another reply: have the students provide drives on which to back up their projects. A friend of mine has a ProTools audio studio, and part of his "set up" charge, is $100 for a bare drive that he will archive for 5 years, or the client can take with him at the end of the project (when the bill is paid).
Eddie O

CS3 - What Are the Best Export Settings for Animation?

I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can.
What are the best possible settings that I can use to export the video to a .MOV file?
A little background info, in case it helps:
The animations were created in After Effects, and the .MOV files were made with the Animation codec.
After editing in Premiere, I exported the finished file to the Animation codec. It looks so-so.
Important: I imported the Premiere Project into After Effects, and exported the project with After Effects. The After Effects Quicktime file looks better than the Premiere version of the Quicktime file. (And has a higher data rate, in case that matters.)
What kind of settings do I need to select in Premiere when I export the video to make the .MOV file look as good as it can?
(And please don't be afraid to dumb it down.)
Thx!

Try an Uncompressed "QT" file. (Component YUV - 10-bit)
BTW: Did your PPRO Settings match the AEFX Comp you exported from?

What are the best plug ins for iMovie 11 running on Lion?

What are the best plug ins for Imovie 11 or Imovie HD running Lion? Especially transitions & effects for still pictures.
Thank you

Hi
For iMovie'08 to 11 - There are no Plug-ins - not supported at all
iMovie HD (in reality HD5) - doesn't work under Mac OS X.7 - at all
iMovie HD6 - can take Plug-ins and run under Mac OS X.7 - BUT some of the Plug-ins doesn't work under X.7
old list on - Plug-ins - Only relevant to iMovie HD6 (May be they are too old)
Stupendous software
www.stupendous-software.com
GeeThree
www.geethree.com
cf/x.
www.imovieplugins.com
Apple
www.apple.com/downloads/macosx/video/ezediapluginsforimovievol1.html
www.imovieplugins.com/fxhome.html
fxStabilizer - for iMovie - Google it
Yours Bengt W

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the best coding technics which will avoid performance problems

Hi Experts
What are the best coding technics which are avoiding memory problems and performance problems
Some times one of few reports are taking too much time to executing while handling large data.
1.What are the best way to declare a internal table to avoid performance problems.
2.what is the best way to process data.
3.what is the best way to clear memory.
Can you guys help me give some good suggestions for writing better programs to avoid performance problems.
Thanks
Sailu

Hi,
Check this link..[Please Read before Posting in the Performance and Tuning Forum Updated |Please Read before Posting in the Performance and Tuning Forum;
Which will be the first thread in the Performance and Tuning Forum.
Search the SCN first.

What are the best practies for naming symbols (spaces OK,etc.)?

What are the best practices for symbol naming for ease, flexibility, & to avoid "gatchas" down the road?
Does it make any difference if one includes spaces in the names of symbols? Are there any widely followed conventions for naming them like using camelCase or underscores?
Thanks!

Hi Gina D 3333,
Best-practice file-naming conventions for PDF files are the same as for any other file. I found this article on Apple's website that contains some useful pointers to consider when you're naming files that will be used on multiple platforms: OS X: Cross-platform filename best practices and conventions
I hope this helps!
Best,
Sara

What are the best books to purchase for pl/sql programming?

What are the best books to purchase for pl/sql programming?
I am new to this field and I am looking for the best books to help me in pl/sql programming. Can someone please suggest?
Thanks

In my opinion one of the best to start
Oracle PL/SQL Programming, Third Edition
Steven Feuerstein

What are the best apps to monitor tests and emails on childs phone

what are the best apps to monitor tests and emails on childs phone?

You could simply log into your child's email with the password that the two of you agree upon, and monitor the emails manually. As for the texts, you could purchase a separate device, and use the child's Apple ID to monitor the iMessages. For SMS/MMS, no way to monitor it. You'll have to use the app called 'Random Parental Inspections'.

What are the best Voice to Text app's for use in classroom?

What are the best Voice to Text app's for use in classroom?

Hi I did download the software you suggested which you mentioned in in our iphone.
However the This did not happen to my text
"text it will appear a botton "Talk" and you're going to have a Text-to-Speech."
I have to hold my finger on the taxt and it says copy and next word is text. so the text needs to behightlighted each time till the end, which is difficult to do. why does the "talk" appear on the bottom?
What do I need to do for that to appear?
Thank you in advance for the rplies.

What manufacturers' model numbers are the best UPS's ?...

Similar Messages

Maybe you are looking for