What maximum number of users supported local p2p?

What maximum number of users supported local p2p?

the maximum number of DIRECT_CONNECTIONS NetStreams in one NetConnection is controlled by NetConnection.maxPeerConnections. the default is 8, but you can change it to anything.

Similar Messages

  • Maximum no of users supported by OCS 10.1.2 in a single box installation ?

    Hi OCS experts,
    What is the maximum number of users supported by OCS 10.1.2 in a single box installation for a 6 way Intel box or a 12way AIX box.???
    I mean if the server hardware (processor, memory, and storage are huge enough)...
    Are there any limits by the software side of OCS ???
    I am planning to deploy OCS for about 15,000 users on Redhat Linux AS 4. We also have the option to deploy it on AIX if required.
    Many thanks,
    maas.

    Many thanks. But as OCS 10.1.2 documentation indicates upto 1,000 users for single server installation. So I wanted to know if there is any practical limit by the OCS software itself on the number of users in single server deployment on Linux.
    Like for instance IBM indicates that domino 7 can now go upto 12,000 users in a single box.
    Is there any similar recommendation from Oracle to ease in capacity planning decisions for Architects and Implementers.???
    I understand that it would be a very difficult prediction keeping in mind the huge functionality of OCS. So let me narrow the scope of our deployment, In the beginning we would using OCS mostly for Email (15,000 users) and about 2000 of these users would also be using calendering. 4,000 Email users use POP clients to check emails frequently. Remaining users use Webmail to check emails upto 2 or 3 times a day.
    Now, if you experts advice that a six way IBM eServer X445 server with 16GB RAM and sufficient SAN storage would be able to take this load then I can go ahead with it. Do I have to take any specific measure in design and deployement to leave room for adding nodes.
    Many thanks,
    maas

  • Maximum number of user mailboxes supported by single Exchange Database in 2007 / 2010 & 2013 ?

    What is the Maximum number of user mailboxes supported by single Exchange Database  in 2007 / 2010 & 2013 ?
    Aditya Mediratta

    Agree with Keith, there is no MB # limit, however there are practical concerns such as DB size and how that effects recoverability as well as performance.   In terms of extremes we had one major educational customer that had 35K Mailboxes in
    a single database so you can utilize a ridiculous # of mailboxes in a DB if desired.  IMO you are better off to keep the # of mailboxes to a reasonable level, i.e. no more than 250-500 mailboxes per DB
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme

    What is the maximum number of users that can be simultaneously connected to a shared drive on an Airport Extreme?

    50
    I haven't tried this, but imagine that things are going to be quite slow.

  • Maximum number of AP supported has already joined cisco

    Dear all,
    We have vWLC, AP connected through MPLS network,  we also have ap base license for 15 AP, the problem is that AP cant joint to WLC because of
    this error:
    Maximum number of AP supported has already joined cisco
    WLC shows that all 15 licenses are used, but we have only 3 AP
    What is that? bug or not?, everything worked fine before we put new 4 AP into the network
    thank you
    I attached outputs in photos:

    This license is evaluate and it works fine, but when it is our license it shows no AP in summary
    (Cisco Controller) >show sysinfo
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.4.100.60
    RTOS Version..................................... 7.4.100.60
    Bootloader Version............................... 7.4.100.60
    Emergency Image Version.......................... 7.4.100.60
    Build Type....................................... DATA + WPS
    System Name...................................... Cisco VWLC
    System Location.................................. ESXI
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1631
    IP Address....................................... 192.168.6.1
    System Up Time................................... 0 days 17 hrs 29 mins 9 secs
    System Timezone Location......................... (GMT +4:00) Muscat, Abu Dhabi
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... Multiple Countries:BY,MX,US
    --More-- or (q)uit
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 7
    Number of Active Clients......................... 41
    Memory Current Usage............................. Unknown
    Memory Average Usage............................. Unknown
    CPU Current Usage................................ Unknown
    CPU Average Usage................................ Unknown
    Burned-in MAC Address............................ 00:50:56:9F:68:43
    Maximum number of APs supported.................. 200
    (Cisco Controller) >show ap summary
    Number of APs.................................... 3
    Global AP User Name.............................. Not Configured
    Global AP Dot1x User Name........................ Not Configured
    AP Name             Slots  AP Model              Ethernet MAC       Location          Port  Country  Priority
    Meeting_Room         2     AIR-LAP1142N-E-K9      54:75:d0:f5:3a:e4  default location  1        BY       1
    Fttb                 2     AIR-CAP3602I-A-K9     30:f7:0d:29:03:42  default location  1        MX       1
    Technical            2     AIR-LAP1142N-E-K9      c8:9c:1d:f4:72:8a  default location  1        BY       1

  • I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by I tunes. In fact it says that I have used maximum number of user accounts. Kindly help me in this matter.

    I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by apple store and I tuned.
    It says that I have already used maximum number of user accounts. Kindly help to resolve this problem.

    Hello Renvin29,
    It sounds like you need to disable your iPhone remotely. I'm sorry to hear about your phone! The only way to do this with is Apple services is if you had Find my iPhone enabled. You have 2 options:
    You can use this article to put the phone into Lost Mode and preserve your data on it, but prevent access to it:
    iCloud: Use Lost Mode
    http://support.apple.com/kb/PH2700
    Or you can just erase it remotely outright:
    iCloud: Erase your device
    http://support.apple.com/kb/PH2701
    You should also take a look at this article for additional info on what to do about this situation:
    If your iPhone, iPad, or iPod touch is lost or stolen
    http://support.apple.com/kb/HT5668
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • How to find maximum number of users we can assign for Hyperion Planning.

    HI,
    How to find maximum number of users we can assign for Hyperion Planning.i.e., how to find license limit in hyperion planning 11.1.2.1.
    In Essbase propreties, the system is showing maximum planning users could be 65535.
    what would be the number for concurrent scenario?
    Thanks
    Giri
    Edited by: Giriprasad on Jun 18, 2012 2:18 AM

    The number of users would be based on your license agreement with Oracle, the system is not aware of your license agreement so it is up to you to stick to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Maximum number os users in a group

    What is the maximum number of users that can be in a group on OS X server 10.4? IN 10.3 I think it was 10,000
    I ask, because I am integrating with an AD server, where the group we are trying to manage preferences on is 28,000>

    As far as i know there is no problem for the os.

  • Maximum number of User defined dimensions in Planning v11.1.2

    Hi guys,
    I am new to Hyperion Planning version 11.1.2, just wanted to clarify what is the maximum number of User defined dimensions that can be added in a planning application.
    I've also learnt that the number of Alias tables is more than the previous versions. What is the maximum number of Alias tables in Planning version 11.1.2 ?
    Regards.

    Maximum number of alias tables is 10 including the default alias table
    As for custom dimensions then I wouldn't expect you to hit a maximum unless you want to design a planning application destined to fail.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Maximum Number of Objects in Local History does not work

    In our Production system, I have configured the Maximum Number of Objects in Local History to be '10'.  I do not see any queries in the dropdown.  I have executed and changed queries since I made this change.  None of the users can see a history log.
    In our Dev system, the Maximum Number of Objects in Local History is working as expected.
    Is there a system-wide setting that overrides my personal setting?
    Thanks.

    you could have a consolidated DSO with the keys alone  and see if you can have an alternate design using an infoset instead....

  • Aironet Maximum Number of Users

    What is the maximum number of users that one Aironet would allow without the disruption of service?

    Lightweight APs have a default limit of 12 clients per AP, but this can be changed. Cisco recommends no more than 25 clients per AP, but it can easily handle more. How many more simply depends on your conditions.
    Keep a few things in mind:
    1. Your actual data rate is generally a little less than half your advertised rate (22Mbps on a 54Mbps link, for example)
    2. You're sharing the ACTUAL data rate with every other client on the AP. So if 20 users are sharing a 54Mbps connection, they'll all get barely over 1Mbps
    3. Any slow clients, 802.11b or otherwise, take more time to communicate with the AP and thus slow all other clients down
    4. RF space is a shared medium, and congestion avoidance mechanisms in 802.11 start creating a LOT of overhead as you increase client count significantly. This starts dropping your actual data rate, so you might start getting only ~15Mbps on a 54Mbps connection.
    All that said, I doubt you'll start seeing disconnects until you hit client numbers in the 30s. But again, take all the above into consideration as you evaluate your environment, your application delay tolerance, and your bandwidth requirements per user.
    Jeff

  • Maximum number of users for server SEQ module exceeded

    Hi ,
    I am getting the below error for optimizer SEQ in SCM 7.0 EHP3 system.
    "Maximum number of user for server SEQ module exceeded"
    But the RFC connection works fine and all are green in /sapapo/opt03.
    Should I increase the user in /sapapo/opt03? for SEQ..and on which column...Maximum slot?
    Thanks in advance

    Can you check this thread:
    maximum number of users for server module SNP exceeded
    Divyanshu

  • Maximum Number of users in a "User Group" (SU01/Logon data/User Group)

    All,
    My security person recently approached me with a problem she has regarding user groups.  She wants to assign user groups so that way division leaders/designees can handle password resets within their own area.  To do this she has started using the "User Group" field in SU01/Logon data.
    She's told me the maximum number of users she can add to a "User Group" is 30.  Can anyone else confirm this?  Is there a setting (profile or otherwise) to increase this limit?  Any DSN or outside reading that anyone can refer me to on this matter?
    Many thanks....

    > There is a little green clip board icon on the bottom right corner...
    I only get that after hitting the Authorization data button in SU10 and the the Multiple selection button next to the user. Ow, and it's not green, the upload from textfile button is
    By the way, hitting F4 on a user input field in SU10 will also provide you with the possibility to select more than 30 users in one go.
    Edited by: Jurjen Heeck on Dec 29, 2009 12:08 PM

  • Maximum number of users

    Hi everyone,
    It's possible to establish the maximum number of users that are using an application?, for example if we put that the max number is 1000, when the user 1001 treats to use the application, we want to send him a message, that he needs to wait
    Regards

    There is no inbuildt mechanism available. But you should write an external service (servlet or EJB) which maintains the count of users . And in your WebDynpro application use the life cycle methods to control the access.
    Like in wdInit() you can check the current count of users and if its more than 1000 then you can display message otherwise show the view and increment count. In the same way in wdExit() call the service to decrease the count.
    Regards
    Abhilash

  • Maximum number of users Per Conference on monthly reports

    Can anyone has SQl query to fetch the maximum number of users per conference in Lync 2010 on monthly basis .
    in monitoring report this report is not coming so please give some workaround .
    Ashwani Thapa

    Have you seen this? http://blogs.technet.com/b/rischwen/archive/2014/01/17/per-user-conference-joins-grouped-by-uritype-sql-query.aspx
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for