What message type used by ALE in transactional data

Hello friends,,,
      I wish to know what msg types are used in transactional data like PO, PR, etc in Materail tables???
thanking you

hello babi,
    Message Type         Technical Name
    Product                    PRODUCT
    Location Group/Assortment  LOCGRP
    Assortment Product         ASRTPRD
    Assortment Version         ASRTPRDVRSM
Assortment Version for Space Management ASRTPRDVRSO
   Allocation and PO           ALLOCPO
   Markdown Proposals          MDPROP
    Open-to-Buy                 OTB
complete details of ALE:
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a6cdd507d11d18ee90000e8366fc2/plain.htm
REgards
Varun

Similar Messages

  • What Message type and Process Code to use for Purchase Order Change in 4.6C

    I like to implement in SAP R/3 4.6C a scenario for Purchase Order Change, via inbound IDoc.
    I have been searching, but could not find what Message Type, Idoc Basic Type and Process Code to use.
    I can not imagine this functionality does not exist in 4.6C.
    Any suggestions for my problem are welcome.

    Hello,
    In this case you should use the message PORDCH and BAPI method BAPI_PO_CHANGE but only exist as of release 4.7.
    Function module    BAPI_IDOC_INPUT1
    Idoc Type              PORDCH01
    Message Type      PORDCH
    So check carefully the following OSS notes:
      [Notes 589066 - BAPI_PO_CHANGE: Incorrect account assignment to network |https://service.sap.com/sap/support/notes/589066] (not be fooled by the description)
    [ Notes 197958 - BAPIs for purchase orders - Missing Functions|https://service.sap.com/sap/support/notes/197958]
    Regards,
    Andrea
    Edited by: Andrea Olivieri on Sep 3, 2009 10:17 AM

  • What message type to use for syndicating data back to R3 from XI

    What message type to use for syndicating data back to R3 from XI. It gives a Message type IDOC error code 51.

    Hi Rehman,
    You are getting error 51 which means "Error: Application document not posted".
    This might because of two reasons:
    1. Your IDoc doesn't contains all the mandatory fields required by the inbound function module to post the IDoc.
    2. You have assigned wrong inbound function module to post the IDoc.
    Please check these cases.
    Hope this will help you.
    Thanks,
    Shiv Prashant Dixit

  • What movment types used for stock transfer from Non-WM sloc to WM sloc?

    Hello experts,
    Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
    Thanks

    Hi
    When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
    Can you please help me to resolve the above issue.
    Thanks.

  • What are the uses of diffrent concepts in data warehousing

    What are the uses of diffrent concepts in data warehousing? Why?
    naveen

    Hi,
    Your statement is correct. To be crisp, the portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organization—all integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
    With its role-based content, and personalization features, the portal enables users—from employees and customers to partners and suppliers—to focus exclusively on data relevant to daily decision-making processes
    To read more visit,
    http://help.sap.com/saphelp_nw04/helpdata/en/a9/76bd3b57743b09e10000000a11402f/frameset.htm
    Regards
    Srinivasan T

  • Can we use LSMW to load Transaction data

    Hi.
    Can we use LSMW to load transactional data.Or it is used only for Master Data.
    With Best Regards
    Mamatha

    Hi,
    you can do upload of transactional data using,
    Standard Programs,
    Batch Input Recording,
    BAPI method,
    IDoc,
    best regards,
    Thangesh

  • IDOC message type use for standard price ALE

    Hi,
    Does anyone know what is the best way to send material master standard price data from one SAP box to another SAP box?
    ex. SAP box A will send standard price data to SAP box B, and the way to update the standard price data in SAP box B, can be done with what method?
    I am thinking to use ALE, to send stanard price data and then trigger a MR21 transaction is the receiving box to update price. Does anyone know what IDOC message type I should use to transfer standard price data?  thx.

    Hi
    I think the IDOC type will MATMAS01.
    Thanks
    Deepak

  • What is the use of ALE and EDI in IDOC process

    hi gurus,
    in which scenario we use ALE/EDI?
    actually IDOC stands for Intermediate document which stores the data and sendng outbound and receiving inbound.
    i am not understanding onething here what is the necessity to use ALE/EDI?
    could you please tell me?
    Regards,
    SOMIU.

    Hi Somu,
    Purpose
    Electronic Data Interchange (EDI) and Application Link Enabling (ALE) are used for exchanging business data between different systems.
    For both these forms of communication, you require the IDoc Interface. The IDoc interface is made up of the definition of a data structure and the processing logic of this data structure. The data structure is the IDoc. The IDoc is the general exchange format of the communicating systems. IDocs can be sent using different methods (for example, Structure linkRFC or as a file).
    Application Link Enabling (ALE)
    You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems. ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
    ·       ALE enables the integration of business processes across several SAP or non-SAP systems.
    Electronic Data Interchange (EDI)
    You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor). The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12). This enables communication with non-SAP systems.
    ·       By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message. 
    Thanks&Regards,
    Phani.
    Points if Helpful.

  • Fault message type using in File to IDoc Scenario

    Hi,
    I have successfully configured File to IDoc scenario. Now I am thinking to add some flavour to it by using Fault message type.
    Can I use fault message type without using any proxies?
    Can some body help in giving an answer to my question and provide some weblogs to achieve the configuration?
    Thanks in advance.
    Suraj Kumar

    Hi Suraj,
    With IDOCs, you cannot set up fault messages as it is async mode communication. There is not control which waits for the processing of the message/application errors as you have it in case of synch mode.
    But, you can set up acknowledgement using ALEAUD. Check this for more /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    praveen

  • Process Code for Message Type LOIPRO(in ALE/IDOCS)

    Hi all,
            I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
    Thanking you in advance,
    anjaly

    Hi
    it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
    There all LOI* idocs are mentioned and then they say:
    The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
    So, in short, there is no inbound process code for LOIPRO.
    Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
    Regards,
    Joe
    Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

  • SYNCH message type use?

    Hi All,
    I configured the ALE settings to send material from client 250 to 214 on the same ECC system. i configured all the steps correctly. But the scenario wouldnt work until I added a SYNCH message type in the partner profile of the 214 client. But i have done scenarios in which the config worked even without the synch interface. Why does this happen? What is the purpose of this SYNCH interface?

    Hi,
    Inorder to provide successful distribution of a model to the concerned systems, SYNCH Message type has to be maintained. If this message type is not maintained the distribution is not successful and the system throws a error "RFC destination  for synchronous communication, Partner Profile XXXXXX, SYNCH doesnot exist".
    To overcome this you would be asked to Generate Outbound partner profile for message type SYNCH.
    ~Krithika

  • How is the Fault Message Type used?

    Hi,
    I have a HTTP-SOAP scenario.I want to post a request to a HTTP Server using the SOAP receiver adapter and get the ackowledgement message from the receiver, if it was successful or not. Is this possible using the Fault Message type?
    If not how else can i capture the response in the EO mode?

    Hi Sivasakthi
    Yes you can capture soap response using SOAP fault message
    Check this link for embedded soap response
    http://www.w3.org/TR/2000/NOTE-SOAP-20000508/
    With this you can refer to this blog as well
    Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
    Thanks
    Gaurav

  • Too many recipients found for message type in the ALE model

    Hello Friends,
                            Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP  .
    In the distribution model i have defined the sender receiver and message type clearly...
    But  in va01  after creating sales order  extras ->Output->Hearder --->Edit
    Output type-- BA00
    medium --ALE
    Dispatch time : Send Immediately
    I am getting a error -
    Too many recipients found for message type ORDRSP in the ALE model
    Message no. B1130
    Diagnosis
    In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
    Procedure
    Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
    Please help me in solving this error.
    Regards,
    jeevan

    Hi Jeevan,
    In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
    Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
    select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
    Under the node ORDRSP, add the filter group for Customer.
    Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
    Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
    Hope it solves your Issues.
    Regards,
    Anbalagan.

  • IDoc Error: No recipient found for IDoc message type in the ALE model...

    Hello Experts,
    I just created an IDoc for purchase orders and when I try to test it after releasing
    the PO, an error is shown in the processing log saying that there are no recipients
    found for my message type of the IDoc. I refrenced it against a working IDoc but I might be
    missing something.
    Hope you can help me guys. Thank you and take care!

    hi,
    in bd64 ,goto change mode select ur distribution model and click add message type define ur logical systems and message type and save.
    thn goto environment - partner profiles - f 8.it will show whether model is created or any errors.
    then go back edit - model view - distribute.
    reward points if hlpful.

  • What is facetime use? cellular minutes or data

    what is facetime use ?  cellular minutes or data

    Well for FaceTime to work you need Wi-Fi so it would be data but not your phone data. It would be your houses internet data. So it won't affect anything to do with your celluar network.

Maybe you are looking for

  • Why can't I open word docs from mail anymore?

    Am on 10.8.2 on Macbook Air and doc and docx attachments tell me to choose application to open the doc with and won't open when I choose "Word" These used to be opened automatically by Word, not I have to manually choose Pages as the only option Am I

  • Java Mapping for attributes

    Hi experts I want to create a java map. My requirement is given below. I/P xml>> <?xml version="1.0" encoding="UTF-8"?> <TradeplaceMessage productionMode="production" xmlns="http://zhm....."> <TransportEnvelope> <Routing><To>abcd</To><From> I want to

  • Tumblr Dashboard Loads way too many new pages

    When I'm on Tumblr, scrolling through my dashboard, I noticed that after a while it gets very slow. The reason why, is that everytime I scroll down a bit or press the 'j'-key (to go to the next post), firefox/tumblr already loads a next page of my da

  • Debug ABAP consumer proxy -- which URL?

    Hi experts, I've a question concerning the URL to be used when debugging cunsumer proxies... So, I take transaction SICF on my ECC 6.0 backend system. In the menu Client --> Recorder --> Activate recording. There I just take the user I'm logged on wi

  • How to change the language of GP administration role ?

    Hello experts, I'm new of Guided Procedure. I assigned all of roles of Guided Procedure to my user,my user's language is Chinese, but the language of all of GP roles are English. I want to change the language, but it seems that I can't change the lan