What Microsoft recommend on installing a SIEM agent on AD and Exchange ?
Can you please advise what Microsoft best practices are on installing SIEM agents on AD and Exchange for log collection.
For Instance Qradar solution insists to install
WinCollect on AD and Exchange, but I am reluctant fearing that it will utilize compute and memory resource creating bottlenecks..
I would rather collect information through WMI..
Any Microsoft document strengthening my opinion?
Ikhlass M. Wardally
Hi,
I just want to confirm what is the current situation.
It seems like there is no MS document mentioned about installing SIEM agent on AD and as Joseph__Moody mentioned, installing any additional software on domain controller is not the best practice.
http://windowsitpro.com/windows-server/q-what-software-and-roles-are-ok-install-domain-controller-dc
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Similar Messages
-
What happens if I install IOS 8 on my iPhone and then my Apple developer account expires.
If I upgrade to IOS 8 beta and my developer account expires will I still get over the air updates or would my iPhone stop working?
You would have a number of problems although your Phone would still work, bugs and all, until the software was released in the fall and you couldn't switch over in the developers site.
Either renew your developer account or stay away from the beta. -
I have Acrobat 10 (10.1.9) that came in the Creative Suite CS5. I have received numerous messages about failed updates so finally did what was recommended by Adobe and uninstalled the program. Now I can't re-install it. These are the error messages I get. Help!
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW065, DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
WARNING: DW065: Display requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1328.Error applying patch to file C:\Config.Msi\PTDB05.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failedI did it through CS, I think. I used the installation disk and selected Acrobat. It loads and then gives me all kinds of error messages and then uninstalls itself.
-
iMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?
You are in the typical catch22.. you cannot use the TC without setting it up.. you cannot set it up without Lion.. so you can install the latest utility.
Do you have any reasonably current iOS devices.. they can run the iOS version of the utility.. that will allow you to set up the TC.
Or invite a friend with a laptop running at least Lion
Or take the TC back and get a plain USB hard drive and backup to that. -
What Microsoft Updates are really being installed?
I’m updating Win 7 64 Bit PCs using WSUS. On the PCs. In “Windows Update, “You receive updates:” is set to “Managed by your system administrator”.
The problem is determining what was installed. WSUS installs doesn’t jive Control Panel>All Control Panel Items>Programs and Features>View Installed Updates or Control Panel>All Control Panel Items>Windows Update>View update history.
In WSUS, 20 updates were installed, including 2 Office updates. In “Control Panel\All Control Panel Items\Windows Update\View update history”, 12 updates were installed on that day, including the 2 Office updates. The “Control Panel>All Control Panel
Items>Programs and Features>View Installed Updates” shows 40 Office updates alone were installed on that day.
What’s going on? How can I tell what updates are being installed?Hi,
We might take use of the status reports:
WSUS 3.0 SP2 Reports
We could generate three reports:
1. Update Reports: provide the status of the updates;
2. Computer Reports:show you the status of computers;
3. Synchronization Reports: enables you to see synchronization information for the WSUS server for a given time period, including errors that occurred during synchronization and a list of new updates. In addition, you can get general, status, and revision
information for each new update.
More detailed information, please check the link above.
Besides, we might consider seek help in WSUS forum and see if experts there could share some insights about this.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Hope this may help
Best regards
Michael Shao
TechNet Community Support -
What Microsoft products and versions is available for Exchange on-premise equivelent of EOP ? My understand was that EOP was geared for O365 tenants.
What Microsoft products and versions is available for Exchange on-premise equivelent of EOP ? My understand was that EOP was geared for O365 tenants.
On Prem can use EOP as well.
For on-prem Exchange 2013, there really is no equivalent otherwise. ForeFront For Exchange is end of life next year.
http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied. -
Installing oracle management agent 12.1.0.2.0 in silent mode.
version: 12.1.0.2.0
platform: IBM Aix power systems 64bit
I installed the oracle management service along with the oracle management agent that comes along with the the first installation. I deinstalled the first installed OMA and tried to install it again using the silent install mode with the response file.
(oms host and the oma host are the same)
among the 3 modes of silent install described in the installation guide, i used agent deploy method.
Here are the steps i followed with the install
1. this the status of my OMS
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emctl status oms -details
Oracle Enterprise Manager Cloud Control 12c Release 2
Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
Enter Enterprise Manager Root (SYSMAN) Password :
Console Server Host : chh-aix-beta
HTTP Console Port : 7788
HTTPS Console Port : 7799
HTTP Upload Port : 4889
HTTPS Upload Port : 1159
EM Instance Home : /oem12c/product/gc_inst/em/EMGC_OMS1
OMS Log Directory Location : /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/log
OMS is not configured with SLB or virtual hostname
Agent Upload is locked.
OMS Console is unlocked.
Active CA ID: 1
Console URL: https://chh-aix-beta:7799/em
Upload URL: https://chh-aix-beta:1159/empbs/upload
WLS Domain Information
Domain Name : GCDomain
Admin Server Host: chh-aix-beta
Managed Server Information
Managed Server Instance Name: EMGC_OMS1
Managed Server Instance Host: chh-aix-beta
WebTier is Up
Oracle Management Server is Up2. I got the version and the platform info of the oms by doing the following
<oracle>chh-aix-beta/oem12c/product/oms/bin> ./emcli get_supported_platforms
Getting list of platforms ...
Check the logs at /oem12c/product/gc_inst/em/EMGC_OMS1/sysman/emcli/setup/.emcli/agent.log
About to access self-update code path to retrieve the platforms list..
Getting Platforms list ...
Version = 12.1.0.2.0
Platform = IBM AIX on POWER Systems (64-bit)
Platforms list displayed successfully.3. I downloaded the management agent software by doing the following ()
$<OMS_HOME>/bin/emcli get_agentimage -destination=/oem12102 -platform="IBM AIX on POWER Systems (64-bit) " -version=12.1.0.2.04. I unzipped the management agent software.
5. I edited the response file as follows. (i edited only the oms_host, em_upload_port, agent_registration_password, since they are the only ones that are mandatory)
OMS_HOST=172.16.24.65
EM_UPLOAD_PORT=1159
AGENT_REGISTRATION_PASSWORD=cchorcl01
#AGENT_INSTANCE_HOME=
#AGENT_PORT=
b_startAgent=true
#ORACLE_HOSTNAME=
#s_agentHomeName=
EM_INSTALL_TYPE="AGENT"6. then i ran the AgentDeploy.sh script using the following.
./agentDeploy.sh -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp(I ignored the prereqs because, i was getting an error with the hostname and the hostname is correct)
7. this the following output i am getting after running step 6.
-e Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -classpath /oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent -prereq
Validating oms host & port with url: http://172.16.24.65:1159/empbs/genwallet
Validating oms host & port with url: https://172.16.24.65:1159/empbs/genwallet
Return status:3
Unzipping the agentcoreimage.zip to /oem12c/base/agent ....
12.1.0.2.0_PluginsOneoffs_212.zip
Executing command : /oem12102/unzip -o /oem12102/12.1.0.2.0_PluginsOneoffs_212.zip -d /oem12c/base/agent
Executing command : /oem12c/base/agent/core/12.1.0.2.0/jdk/bin/java -d64 -classpath /oem12c/base/agent/core/12.1.0.2.0/oui/jlib/OraInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/xmlparserv2.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/srvm.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/emCfg.jar:/oem12c/base/agent/core/12.1.0.2.0/jlib/agentInstaller.jar:/oem12c/base/agent/core/12.1.0.2.0/oui/jlib/share.jar oracle.sysman.agent.installer.AgentInstaller /oem12c/base/agent/core/12.1.0.2.0 /oem12102 /oem12c/base/agent /oem12c/base/agent/agent_inst AGENT_BASE_DIR=/oem12c/base/agent -ignorePrereqs AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp
Cloning the agent home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -clone -forceClone -silent -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/core/12.1.0.2.0 -responseFile /oem12102/agent.rsp AGENT_BASE_DIR=/oem12c/base/agent AGENT_BASE_DIR=/oem12c/base/agent RESPONSE_FILE=/oem12102/agent.rsp -noconfig ORACLE_HOME_NAME=agent12c3 -force b_noUpgrade=true AGENT_PORT=-1
Clone Action Logs Location:/software/oracle/logs/cloneActions<timestamp>.log
Cloning of agent home completed successfully
Attaching sbin home...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -attachHome -waitForCompletion -nowait ORACLE_HOME=/oem12c/base/agent/sbin ORACLE_HOME_NAME=sbin12c3 -force
Attach Home Logs Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/AttachHome<timestamp>.log
Attach home for sbin home completed successfully.
Updating home dependencies...
Executing command: /oem12c/base/agent/core/12.1.0.2.0/oui/bin/runInstaller -ignoreSysPrereqs -updateHomeDeps -waitForCompletion HOME_DEPENDENCY_LIST={/oem12c/base/agent/sbin:/oem12c/base/agent/core/12.1.0.2.0,} -invPtrLoc /oem12c/base/agent/core/12.1.0.2.0/oraInst.loc -force
Update Home Dependencies Location:/oem12c/base/agent/core/12.1.0.2.0/cfgtoollogs/agentDeploy/UpdateHomeDeps<timestamp>.log
ERROR: Update home dependency failed.I am getting stuck at updating home dependencies. I dont know what that means. If you have faced similar problems while installing oracle management agent please do share your solution. if you need more info please let me know.All these commands are run on the host (hostname=chh-lpar20) where the agent is being installed, and these commands are run as root user.
ifconfig -a
en0: flags=5e080863,c0<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),PSEG,LARGESEND,CHAIN>
inet 172.16.28.222 netmask 0xfffffc00 broadcast 172.16.31.255
tcp_sendspace 131072 tcp_recvspace 65536 rfc1323 0
lo0: flags=e08084b,c0<UP,BROADCAST,LOOPBACK,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,LARGESEND,CHAIN>
inet 127.0.0.1 netmask 0xff000000 broadcast 127.255.255.255
inet6 ::1%1/0
tcp_sendspace 131072 tcp_recvspace 131072 rfc1323 1ping chh-lpar20
PING chh-lpar20: (172.16.28.222): 56 data bytes
64 bytes from 172.16.28.222: icmp_seq=0 ttl=255 time=0 ms
64 bytes from 172.16.28.222: icmp_seq=1 ttl=255 time=0 msnslookup chh-lpar20
Server: 172.16.29.213
Address: 172.16.29.213#53
** server can't find chh-lpar20: NXDOMAINnslookup 172.16.28.222
Server: 172.16.29.213
Address: 172.16.29.213#53
** server can't find 222.28.16.172.in-addr.arpa: NXDOMAINto check the if the port 3872 and 1830-1849 are free I ran the follwoing command
./agentDeploy.sh -prereqOnly AGENT_BASE_DIR=/oem12102/base/agent
this was the result i got inregards to the ports
Check complete: Passed
========================================================
Performing check for PortCheck
Checking for port availability and hostname validity...
Trying for host : chh-lpar20/172.16.28.222 and port : 3872
Trying for host : chh-lpar20/192.168.12.23 and port : 3872
Port= 3872 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1830
Trying for host : chh-lpar20/192.168.12.23 and port : 1830
Port= 1830 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1831
Trying for host : chh-lpar20/192.168.12.23 and port : 1831
Port= 1831 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1832
Trying for host : chh-lpar20/192.168.12.23 and port : 1832
Port= 1832 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1833
Trying for host : chh-lpar20/192.168.12.23 and port : 1833
Port= 1833 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1834
Trying for host : chh-lpar20/192.168.12.23 and port : 1834
Port= 1834 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1835
Trying for host : chh-lpar20/192.168.12.23 and port : 1835
Port= 1835 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1836
Trying for host : chh-lpar20/192.168.12.23 and port : 1836
Port= 1836 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1837
Trying for host : chh-lpar20/192.168.12.23 and port : 1837
Port= 1837 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1838
Trying for host : chh-lpar20/192.168.12.23 and port : 1838
Port= 1838 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1839
Trying for host : chh-lpar20/192.168.12.23 and port : 1839
Port= 1839 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1840
Trying for host : chh-lpar20/192.168.12.23 and port : 1840
Port= 1840 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1841
Trying for host : chh-lpar20/192.168.12.23 and port : 1841
Port= 1841 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1842
Trying for host : chh-lpar20/192.168.12.23 and port : 1842
Port= 1842 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1843
Trying for host : chh-lpar20/192.168.12.23 and port : 1843
Port= 1843 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1844
Trying for host : chh-lpar20/192.168.12.23 and port : 1844
Port= 1844 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1845
Trying for host : chh-lpar20/192.168.12.23 and port : 1845
Port= 1845 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1846
Trying for host : chh-lpar20/192.168.12.23 and port : 1846
Port= 1846 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1847
Trying for host : chh-lpar20/192.168.12.23 and port : 1847
Port= 1847 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1848
Trying for host : chh-lpar20/192.168.12.23 and port : 1848
Port= 1848 is busy.
Trying for host : chh-lpar20/172.16.28.222 and port : 1849
Trying for host : chh-lpar20/192.168.12.23 and port : 1849
Port= 1849 is busy.
Check complete. The overall result of this check is: Failed <<<<
Check complete: Failed <<<<
Problem: Either port is unavailable or hostname configuration is not valid.
Recommendation: Make sure the port is available and the hostname configuration i
s proper.I don't know what to make of the results I got for executing the nslookup command. -
How to install interMedia web agent
Hi folks,
I downloaded im8154_lnx.zip (interMedia Web Agent 8.1.5.4) for linux
from Oracle. The webserver I am using is Oracle HTTP server.
Before I install the web agent, the HTTP server works fine.
I read the document for installing interMedia web Agent, however,
it is not the case when I tried to install the agent. For example,
the doc asks me to include mod_oraordwscias.conf in the oracle_apache.conf file,
but the mod_oraordwscias.conf file doesn't exist. I only have three
files in the /ord/web/apache/:
mod_oraordwsc.c mod_oraordwsc.h mod_oraordwsc.module
I also don't understand what's the file mod_oraordwsc.module for.
Does anyone know how to make the interMedia Web Agent module works with
Oracle HTTP server? Thank you so much.
Best regards,
Kai HuangHi Kai,
The interMedia Web Agent is not available for the Oracle HTTP
server on Linux, nor are there plans to port it or support it on
any platforms or web server configurations other than those shown
below. For information on alternatives to the Web Agent,
please see the interMedia software page on OTN:
http://otn.oracle.com/software/products/intermedia/software_index.htm
The closest equivalent of the Web Agent is the interMedia Code
Wizard for the PL/SQL Gateway.
Regards,
Rajiv
Platforms/web server configurations supported by interMedia Web Agent:
Platform
Web Server Solaris Windows NT Linux
Oracle HTTP Server 8.1.5.4.1 8.1.5.4.1 Not available
powered by Apache
Apache Web Server 8.1.5.4 8.1.5.4 8.1.5.4
from www.apache.org
iPlanet Web Servers 8.1.5.4 8.1.5.4 8.1.5.4
from Netscape/Sun
Microsoft IIS Not applicable 8.1.5.4 Not applicable
Oracle Application 8.1.5.4 8.1.5.4 Not available
Server
Note that 8.1.5.4.1 is the latest (and only) version of the Web Agent
installation kit maintained on OTN. Please see the OTN page for more
information on supported Oracle client (OCI) versions. -
OWSM installed on client Agent machine?
Hi,
If I need to install a client agent on a machine where the is no OAS installed i must install an OWSM on that machine (http://download.oracle.com/docs/cd/E10291_01/doc.1013/e10298/agents.htm#CIHBABDJ)
Is a OK to just do a basic (developer) standalone OWSM installation? If not you also need a database installed and then it begins to be a bit expensive.
What about monitoring. Can I configure is so the monitoring data is send to my main OWSM installation or will it only be available at the local OWSM?
Regards Pete
Message was edited by:
Peter Lorenzen
Message was edited by:
Peter LorenzenK.Ramesh wrote:
JVM come with OS. JVM ll get installed while installing OS.This depends on the OS and the setup. As far as I know for example Microsoft Windows doesn't provide any JVM/JRE/JDK as a setup option.
I think, U should check JRE installed or notThis makes no sense. JVM is part of the JRE. -
Microsoft office is installed on two user accounts. My husbands account works fine, but my account keeps getting an error message every time I try to open up a new document. Why wont it work on both accounts? How do I fix this?
Hi Aubs,
Without knowing what the error is, there's not much help we can provide....
Cheers,
GB -
How to install Oracle Grid Agent 11g into windows hosts ?
Hi there, I was not able to deploy management agents into windows hosts machines !
I followed steps below and I am getting these errors :
On windows 2003 server, I have downloaded grid agent here :
D:\grid\Windows_X64_Grid_Control_agent_download_11_1_0_1_0\windows_x64\agent
I have setup.exe file ! When I double click it, I got this message :
Only silent installation is supported search help.
Well, I did a lot of times setup.exe -silent -responseFile <path>additional_response.rsp and the setup process tells me that I am not following the security procedures.
I am newbie on Grid!
I don´t want deploy agent using deployment wizard due to security resctrictions, they do not allow openssh servers on windows servers.
Have you guys succeeded with this installation ? I mean, install fresh agent on single target windows server machine!
I would appreciate any help.
Tks.
Edson - CLAROEdson,
what I would do is go for the cloning option.
On the OMS Server an Agent has been installed as part of the OMS installation.
Stop this Agent
AGENT_HOME/bin/emctl stop agent
Create a zip file from the agent11g folder
Copy it to a server where you want to install the Agent
unzip the folder in the location where you want to install
Restart the Agent you had stopped on your OMS server
AGENT_HOME/bin/emctl start agent
On the destination server
Then from the AGENT_HOME/oui/bin
runInstaller -clone -forceClone ORACLE_HOME=<full path of Agent Folder> ORACLE_HOME_NAME=OracleHomeAgent11g -noconfig -silent b_chainedInstall=false oracle.sysman.top.agent:s_installType=AGENT
Then from AGENT_HOME/bin/agentca -f
AGENT_HOME/root.sh (Under Unix this needs to be run as user root, not sure if this procedure is the same under Windows)
This is based on the procedure described in MOS note : How to Clone a Management Agent And Known Issues [ID 579156.1] which referes to a 10.2.0 Agent, but I have been able to use this procedure under Windows with a 11.1 Agent as well.
Goodluck
Regards
Rob
http://oemgc.wordpress.com -
I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks
Apple most likely has the same poor taste that Microsoft does when it come to defaults. Microsoft likes to hide things like settings, preset, folders etc from normal users think the dumb or something else. If Apple also hide things you will have to make some system setting changes that will allow Finder to do it job and find it for you.
-
How To: Install a Client Agent link broken
I wanted to know if there was a new version of the agent and found the link broken
[Quote]
When you select an agent from the table of sync groups and sync agents on the SQL Data Sync landing page, you go to the sync agent page.
SQL Data Sync Client Agent
When you select a client agent from the SQL Data Sync landing page, three buttons appear at the bottom of the page.
REFRESH
MANAGE KEY
Create a new agent key. After you create an agent key, launch the agent and submit the new key value.
DELETE
Delete the selected client agent.
For more information on Client Agents, see the topics
How To: Install a Client Agent,
How To: Register a SQL Server database with a Client Agent, and
How To: Change an Agent's Key on MSDN.
[/Quote]
I keep getting redirected to http://www.microsoft.com/fr-fr/default.aspxHi,
Thank you for the feedback. I will have the relevant team notified.
You can have a check on the below link for SQL Data Sync (Preview) Client Agent.
http://msdn.microsoft.com/en-us/library/azure/jj823137.aspx
Regards,
Mekh. -
Problem install Intermedia, web agent
Hi, I'm just installed the kit, but I have next errors...
file: Error_log from [home_portal]\apache
[date] [alert] mwm-00067: non-recoverable initialization or termination error
[date] [alert] [client 10.1.0.40] Configuration not available to execute request
[date] [alert] [client 10.1.0.40] Configuration not available to execute request
[date] [error] [client 10.1.0.40] File does not exist: d:/oracle/portal/apache/apache/htdocs/help
[date] [alert] [client 10.1.0.40] Configuration not available to execute request
[date] [alert] [client 10.1.0.4] Configuration not available to execute request
[date] [alert] [client 10.1.0.4] Configuration not available to execute request
[date] [alert] [client 10.1.0.4] Configuration not available to execute request
[date] [alert] [client 10.1.0.4] Configuration not available to execute request
[date] [alert] [client 10.1.0.4] Configuration not available to execute request
file: wsclstch.err from c:\winnt
???-00001: event logged at 06-nov-2000 13:38:23
MWM-00065: message not found
message file open error: prod='ord' fac='mwm' -
routine=lmsaip, data=1
???-00001: event logged at 06-nov-2000 13:38:23
MWM-00067: message not found
file: mod_oraordwscias.conf
LoadModule oraordwsc_module
"D:\Oracle\Ora81\ord\web\apache\ApacheModuleOraOrdWscias.dll"
<Location /intermedia>
SetHandler intermedia-handler
Order deny,allow
Allow from all
</Location>
File: oracle_apache.conf from: [home_portal]\apache\conf
include "d:\oracle\portal\Apache\Ojsp\conf\ojsp.conf"
#include "d:\oracle\portal\xdk\admin\xml.conf"#
include "d:\oracle\portal\Apache\modplsql\cfg\plsql.conf"
include "d:\oracle\ora81\ord\web\apache\mod_oraordwscias.conf"
I can go http:/server:port/intermedia/admin,
http:/server:port/intermedia/~about
and can't see, what's the problem.
thanks
nullHi,
The problem here is that the web agent has to be installed into the same Oracle home as Oracle HTTP Server/Oracle Portal. Unfortunately, this was omitted from the web agent's installation README. (This has just been fixed and the new version has just been replaced on OTN.) To get the web agent up and running, de-install it from the Oracle8i home and re-install it into the Oracle HTTP Server/Oracle Portal home.
Sorry about the README, hopefully this will get you going.
Simon
null -
What bluetooth device is installed on my Omni 200 5380qd?
I recently performed a clean install of windows 7 64 bit home/premium (I7 2.93 Ghz, 8 gb RAM). Unfortunately I could not copy the original drivers because my OS was entirely inaccessible. My question is, what driver should I install for my bluetooth adapter? The current driver indicates it is the generic driver and does not even tell me the brand of bluetooth device. I have attempted to update it from device manager, however I says the best driver is already installed (from 2006). This computer was purchased February 2011 and I would at least like to have the original driver and know the brand of the device??? Thanks in advance!!
You can use the Device Manager to determine the brand and model of the bluetooth. Right-click on the bluetooth device and select the details tab in the properties window and then use the drop down under properties to select the hardware ids information.
Post the hardware ids information and I will be able to tell you what it is.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Maybe you are looking for
-
If customer claim return of 5 kg, but the actual goods return is only 3 kg, however customer needs to credit 5 kg back to customer. Current situation: credit memo for 3 kg is creation based on return delivery, the credit memo for another 2 kg is cr
-
Any function to check the input value is integer?
May I know if there's any function to check the input value is integer in Form 4.5? Thanks.
-
How to validate an attribute in an entry from another data source
Hi, i have a problem.. the users in our system have an address field...now this address field has to be verified against the values of addresses stored in another database,lets call it AddDB... if the address entered in the entry does not match again
-
Dealing with functions not in class Object
Hi, while i was working on GJ i faced the following problem, when i write a generic class i have to take into my consideration those functions that i want to define for the row type class and not included in class Object (toSting() is in class Object
-
buenas tardes, las funciones especiales de las techas superiores (f1 a f12) no me sirven, el pc no se deja apagar !