What mobile graphics cards are supported for either CUDA or OpenCL?

Howdy.  I currently render on a desktop, but work requires me to render on a laptop - for that reason, they've given me a small budget to pay for one. 
My biggest concern is that I have access to OpenCL or CUDA rendering - there's easily a 10x difference between rendering with it and rendering without it, and they need the rapid response. 
I'm wondering what mobile graphics cards can be used for mobile graphics rendering - and if I can do it with Intel graphics. Doing so would make hunting for a laptop significantly cheaper.

I thought the bottom limit was 1GB for CC, so that must be why the sniffer tells you of insufficient memory

Similar Messages

  • What video cards are supported for os X?

    What video cards are supported for os X? besides the one apple sells.

    There is no official list from Apple, since they don't support hardware besides what they will install. YOu can look up support for certain cards, since people have used 3rd party ones. YOu should be able to come up with a particular cards compatability.

  • What graphics cards are supported?

    I'm asking this because I didn't fully understand the answers I've found elsewhere.
    I've got a nvidia geforce 8800 gts graphics card. Will premiere pro cs5 take full use of that card, or will I have to upgrade to
    say, a 5850 card?
    Going to edit a 1 hour program shot on canon 7d.

    You may have already seen this, but it's a List of Supported nVidia CUDA Cards.
    If you have already seen that, just ignore the link.
    Good luck,
    Hunt

  • What Graphics Cards Are Compatible For 3D?

    I currently have Intel HD Graphics.
    There are...... endless lists of graphics cards out there, so I thought I'd ask here just a few graphics cards that are compatible.  I always get a message that says I cannot make any 3D models because my graphics card is not compatible.
    I have an Intel Celeron N2830 Processor... do I need to change this too?

    Ahh, yes. You can find a list of tested graphics here: Photoshop CC and CC 2014 GPU FAQ
    Benjamin

  • What brand graphic card is better for Rendering?

    I"m not asking what graphic card. I"m asking about Brand. Most people say for nVIDIA  EVGA is better and stablre. But as a Video editior we need good cooling on the cards. EVGA cards cooling doesn't look impressing when looking. Eccept the Signature cards they are equipped with close type one fan. But i find Gigabyte / Msi / Asus having dual fan and heat pipes. I really don't understand what brand to recomend to a friend who is going to buy a card soon.

    I have the EVGA GTX 680/4G Classified and it is overclocked.
    Depending on environmental temps, the idle temp of the EVGA card is slightly lower than the CPU temp when idle. Usually around 31 - 32° C.
    Under heavy load, with GPU loads around 98%, core @ 1175 MHz and Memory @ 3523 MHz, the termp goes up to around 56 - 57° C with fan speed at 52%.  Memory bandwidth is then 226 GB/s. These figures are pretty nice and far below TDP.
    All video cards are about equal, be they from Asus, Gigabyte, EVGA, PNY, Zotac, or other brand. They differ somewhat in clock speeds, amount of memory and cooling solution, but the differences are minor. The choice is mostly influenced by factors like speed, memory bandwidth, cores and # VRAM) in relationship to price and length of warranty. Cooling is not the deciding factor IMO.

  • Which graphics cards are recommended for Final Cut Pro X?

    I'm in the process of downloading Final Cut Pro X and I'm truly exited.
    I have a 2008 Mac Pro with 8GB of memory and am going to order 8GB more.
    Now I'm looking to upgrade my graphics card. This card also should support Adobe After Effects.
    Thanks

    Get a PC ATI 5870 or 6870 for little money and install MacBook Pro 2011 graphics update.
    Works out of the box from 10.6.7 on.
    Visit netkas.org forums for more info.

  • What games and apps are supported for the N80 and ...

    Looking for some games for my N80 and some apps.
    Where is the best place to find out what is supported?
    Does anyone know what s supported yet? games/apps etc etc?
    My N80 is on Orange purchased in June 2006 firmware v 3.0617.06 03-05-2006
    Cheers
    Andy

    Support is still sporadic at the moment - but the best place I've found is my-symbian.com
    HTH

  • What HDDs are supported for Satellite 5100-201

    Hi!
    My disk made some strange noises, maybe it have one foot in the grave...
    Have latest bios 1.9. and original disk at 30GB.
    Have an Hitachi 40GB I tried with, but notebook did not find it.
    So I would like to know what disks and sizes that are supported for that model.
    Thanks in advance!

    Hi
    Very strange did you use a compatible 40GB HDD?
    In my knowledge the notebook should be able to recognize the 40GB HDD.
    As far as I know the 30 GB HDD which was installed is a Toshiba MK3017GAP and the computer supports a 20, 30, 40 or 60 GB HDDs.
    I think these HDD should be compatible:
    Toshiba HDD2171B 40GB HDD
    HITACHI G8BC00009110 40GB HDD
    Toshiba HDD2183B 60GB
    PS: The strange noise coming from the HDD could be the beginning of the end
    So make a data backup.

  • Recommended Graphics card and processor for Equium L20-264

    Hi,
    I was wondering what graphics cards are compatiable with equium l20-264 because i have a standard ATI eXpress radeon 200M (rubbish) and wanted to upgrade my graphics card but i am a beginner i have upgraded my ram but really need a upgrade for my graphics card for a batch of games for vista (you are probably thinking how i got vista on a non-vista laptop ^_^)
    I also wondered if i coould upgrade my proccesor to a better one something like 1.0 GHZ to 2.5 GHZ but a celeron one so i don't have to get a new motherboard.

    Hi
    I will not recommend any graphic cards for this unit because its generally not possible to replace or upgrade the graphic card chip on the notebooks.
    The CPU upgrade could be possible.
    The CPUs on the newer generation of notebook motherboards are not soldered and it could be possible to remove it.
    BUT the CPU upgrades are not advisable because
    - firstly you will lose the warranty and
    - secondly the notebook could run unstable because of the higher temperature.
    However, I found some compatible Intel Celeron-M CPUs which are supported by motherboard:
    Intel Celeron-M 350 (1.30GHz) FSB: 400MHz
    360 (1.40GHz)
    370 (1.50GHz)
    380 (1.60GHz)
    bye

  • HOW CAN I KNOW GRAPHIC CARD ON BOARD FOR MY LAPTOP

    hi,i've installed windows 8 pro and i don't know drivers are compatible for thishow can i know?and which graphic card is compatible for my laptop hp pavilion 14-n265tx already built radeon graphici've installed drivers from driver pack solution and now radeon graphic hd 8600m is also installedand i don't see catalyst control centre on right clickplease help me what should i do? 

    Hi, The following link shows the specs of your machine:     http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04197607 It has (a) Intel HD Graphics 4400 (also called on board graphics),(b) AMD Radeon HD 8670M Graphics (2 GB DDR3 dedicated). Regards.

  • I want to integrate SMS gateway to Cisco ISE 1.2 and my question is SMS notifications are supported for Guest self−registration

    I want to integrate SMS gateway to Cisco ISE 1.2 and my question is 
    SMS notifications are supported for Guest self−registration Services ? or it should be done by Sponsor 

    I'm not sure I understand the question.  Do you want to log in to the Sponsor Portal using AD credentials?
    Create an Identity Source Sequence using AD as an Authentication Source.  Go to Administration > Identity Management > Identity Source Sequences.  Either Edit or +Add a Sequence and choose from the Authentication Sources shown.
    Then choose that Identity Source Sequence by going to Administration > Web Portal Management > Settings.  Double-click Sponsor from the Left Menu and click Authentication Source.  Choose the Identity Source Sequence.  Click Save.
    I hope this helps.
    Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question.  Otherwise, feel free to post follow-up questions.
    Charles Moreton

  • I contacted what I thought was Brother Support for my new printer, then I got skeptical.  He gained access through a program called TeamViewer, is my Mac safe?

    i contacted what I thought was Brother Support for my new printer, then I got skeptical.  He gained access through a program called TeamViewer, is my Mac safe?

    They're probably just interested in getting $ from you, there are several companies who advertise in a way that suggests 'official' support for all sorts of things. Unfortunately, if they had access as you describe, they potentially could have installed other software and/or read any of your files.
    Ideally - change all passwords for email/banking/login & restore a backup from before this happened.

  • I am a male, and am looking at buying an ipod touch 5, i do not know what color i should get, does anyone have any suggestions on what ipod touch colors are best for guys

    I am a guy and i am looking at buying an ipod touch 5, i do not know what color i should get, does anyone have any suggestions on what ipod touch colors are best for guys?

    The Product Red model

  • What kind if tables are suitable for partitioning?

    What kind of tables are suitable for partitioning?
    I have several tables in same schema. Each of them is bigger than 200MB. DML commands are executed continuously against these tables. After diagnosis, I know than the sequential read wait is the root cause. Should I partition each of them?
    Edited by: jetq on Jul 16, 2009 8:04 PM

    jetq wrote:
    What kind of tables are suitable for partitioning?The question to answer your question is: What will be gained by partitioning and why? When you understand this, then you can decide if it is suitable for partitioning.
    BTW sequential read wait has to do with index scans, not table scans. Table scan waits are reported as scattered reads, not sequential.
    Regards,
    Greg Rahn
    http://structureddata.org

  • Jwsc Error - Only HTTP ports are supported for JAX-WS

    Hi
    I am trying to create a Webservice from wsdl. I have been able to generate java files and jar file with wsdlc ant task.
    However when i try jwsc I get follwoing error
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    <----- follwowing task for generating java files --->
    <taskdef name="wsdlc" classname="weblogic.wsee.tools.anttasks.WsdlcTask"/>     
    <target name="generate-from-wsdl">
              <wsdlc
                   srcWsdl="wsdl_files/UserPrefWebService.wsdl"
                   destJwsDir="web/web-inf/lib"
                   destImplDir="src"
                   packageName="com.ws.userpref"
                   type="JAXWS"/>
         </target>
    <----- follwowing task for generating class files ----THIS IS FAILING --->
         <taskdef name="jwsc" classname="weblogic.wsee.tools.anttasks.JwscTask" />      
         <target name="build-service">
              <jwsc srcdir="src" destdir="ear">
                   <jws file="com/ws/userpref/UserPrefWebServiceImpl.java"
                        compiledWsdl="web/web-inf/lib/UserPrefWebService_wsdl.jar"
                        type="JAXWS"/>
              </jwsc>
         </target>
    <----- This is the Error --->
    C:\Development\CFCDemoWorkspace\UserPreferencesServer>ant build-service
    Buildfile: build.xml
    build-service:
    [jwsc] JWS: processing module /com/ws/userpref/UserPrefWebServiceImpl
    [jwsc] Parsing source files
    [jwsc] Parsing source files
    [jwsc] 1 JWS files being processed for module /com/ws/userpref/UserPrefWebS
    erviceImpl
    [jwsc] C:\Development\CFCDemoWorkspace\UserPreferencesServer\src\com\ws\use
    rpref\UserPrefWebServiceImpl.java 18:8
    [jwsc] [ERROR] - Only HTTP ports are supported for JAX-WS.
    [AntUtil.deleteDir] Deleting directory C:\DOCUME~1\138904\LOCALS~1\Temp\_3os716
    BUILD FAILED
    C:\Development\CFCDemoWorkspace\UserPreferencesServer\build.xml:24: weblogic.wse
    e.tools.WsBuildException: JWS Validation failed.
    Total time: 10 seconds
    Does any one has any input on this error?
    Thanks
    Srikant

    Thanks David,
    Below is the wsdl
    <s0:message name="ws_getUserPreference">
    <s0:part element="s1:ws_getUserPreference" name="parameters"/>
    </s0:message>
    <s0:message name="ws_getUserPreferenceResponse">
    <s0:part element="s1:ws_getUserPreferenceResponse" name="parameters"/>
    </s0:message>
    <s0:portType name="UserPrefWebServicePort">
    <s0:operation name="ws_getUserPreference" parameterOrder="parameters">
    <s0:input message="s1:ws_getUserPreference"/>
    <s0:output message="s1:ws_getUserPreferenceResponse"/>
    </s0:operation>
    </s0:portType>
    <s0:binding name="UserPrefWebServiceSoapBinding" type="s1:UserPrefWebServicePort">
    <s2:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
    <s0:operation name="ws_getUserPreference">
    <s2:operation soapAction="" style="document"/>
    <s0:input>
    <s2:body parts="parameters" use="literal"/>
    </s0:input>
    <s0:output>
    <s2:body parts="parameters" use="literal"/>
    </s0:output>
    </s0:operation>
    </s0:binding>
    <s0:service name="UserPrefWebService">
    <s0:port binding="s1:UserPrefWebServiceSoapBinding" name="UserPrefWebServicePortSoapPort">
    <s2:address location="https://localhost:7001/UserPrefService/UserPref"/>
    </s0:port>
    </s0:service>
    </s0:definitions>
    do i need to add <wlhttptransport/> in jws during the buid?

Maybe you are looking for