What Monitor Do You Use With Your Macbook Pro

I was looking into purchasing a new monitor for my Macbook Pro. It is an older one, 15" 2.5 GHz. I was going to bite the bullet and get the Apple 24" LED one knowing it is a great monitor overlooking that price is almost double of other monitors. But looking at the compatibility, I have to get a $150 adapter which I think puts me over the price hit.
Just wondering what monitor/displays is everyone using that don't require a $150 adapter?

Go to Apple menu -> About This Mac -> More info and tell us your Machine ID.  This will say MacBook Pro x,y.  It is those x,y values we need to know.

Similar Messages

  • What RAID Setup do you use for your Macbook Pro Scratch Drive?

    Is there any benefit to using an Express-ESata Raid Enclosure vs a single esata drive as the scratch drive?
    If so, is there any benefit to using a 4 drive Raid 0 vs a 2 drive raid 0?
    What Raid setups are any of you all using with your MacBook Pro's? Is there a significant performance difference between using a E-Sata drive and a FW800 drive. Is RAID the right way to go?
    Sorry I'm not making a lot of sense right now, but I've searched through 20 or so pages of the forum and didn't see that anyone had addressed this question yet.

    OK, just to give you a frame of reference, I just performed the following tests -
    I hooked up my Sony AVCHD camera to my Mac Book Pro 2.4 ghz with 4 GB ram - (pretty close configuration to yours) - and imported a 26 second clip into FCP 7 with the following drive configurations:
    Capture to internal Mac Drive, no externals: 26 Second clip takes 44 seconds
    Capture to external WD USB2 drive: 26 Second clip takes 44 Seconds
    Capture to external CalDigit 2 Sata Drive Array, Raid 0, via Firewire 800: 26 Second clip takes 42 seconds
    OK, so now I move the camera over to my Mac Pro 8-Core, 2 x 3.2 Ghz Quad Core Xeon with 14 gigs of ram, and capture *to the same external CalDigit 2 Sata Drive Array,* Raid 0, via Firewire 800: 26 Second clip takes 11 seconds
    My conclusion would be the drives and drive throughput is not as consequential as the CPU horsepower in doing the conversion from AVCHD to Pro Res. However, there are many very knowledgeable people who look at these threads, and I would be interested to hear what they have to say.
    Hope this helps.
    Message was edited by: Meg The Dog to correct typo

  • What display do you use with your 2005 Mac mini?

    Hi all,
    I was wondering which displays people are using with their 2005 Mac minis and
    which (if any) adapters are necessary?
    Thanks!
    Mike

    I'm using a Magnavox 15" LCD TV via it's VGA input on my day one mini. The original 2005 minis have a full sized normal DVI output and came with a DVI to VGA adapter. If yours no longer has that, it's the only adapter you'd need for most common computer monitors. Many newer monitors come with DVI already, so no adapter would be needed.

  • What screen do you use, with your MBP?

    Hiya,
    im lookin for more screen real estate. what do you guys use? im kind of eyen' the Acds...???
    Thanks.

    I have been using a 23-inch Apple Cinema Display for two years now, and I have loved every minute of it!
    I have never had any problems at all, and I have had the monitor running solid for those two years.
    Before my Apple Cinema Display, I had tried displays from Dell and Samsung, both of which had to be returned due to defects.
    In the studio, I connect my MacBook Pro to a Sharp Aquos TV, which has always performed exceptionally well too.
    Good luck!

  • Which sleeve/bag/case do you use for your Macbook Pro?

    So what do you use? I've been stumbling across ebay to find something decent for my 15 inch mid 2009 but most of the sleeves don't fit the new macbooks...

    for my 17" MBP I use a Waterfield bag (http://sfbags.com). It's actually a sleeve and a cargo bag combo with a nice cable bag as well. Not cheap ($270 or so), but it's very well made and a very nice compliment to the apple in terms of fit, finish, and quality. The Waterfield bags are fantastic, and the sleevecases are very protective, such that you could buy just the sleevecase and drop your computer in whatever bag you like at the moment.
    For an older 13" white macbook, I have a Pinder thin, which is much cheaper (~$35 on sale) and is a nice thin minimalist bag. It makes for the smallest laptop and bag combo I've seen (prior to the air) that I would be comfortable carrying around.
    Sheldon

  • HT202856 Would my Macbook Pro 13-inch (mid-2012), be compatible with a 4K or 5K monitor? If not, which is the best monitor I can use with this Macbook Pro?

    In the likely event that my laptop is not compatible with 4K or 5K monitors, a few recommendations would be much appreciated.

    No. It only supports up to 2560 by 1600 pixels so any monitor with that resolution should work.

  • What is the best external battery to use with a macbook pro retina?

    Looking for the best option here. What is the best external battery to use with a macbook pro retina?

    You should check your date of purchase against the manufacturer's warranty
    or guaranty since some of those better brands have some recourse should
    they fail within a specified time period. A good reason to save dated receipts.
    Since solid-state USB drives probably don't (all) use a wear-leveling software
    to equally utilize their recordable space evenly, it is possible that some of these
    may exhibit a failure in some sector areas due to excessive over-writing. If the
    ones you use do not have such a technology or an undercounted total capacity
    with a means to automatically write in other sections, you may have to consider
    manually using a disk utility to zero-overwrite and reformat them occasionally.
    Even so, that may only help a marginal flash or thumb drive work a little longer.
    Should a camera memory card fail you still may be able to attempt with margin of
    success, to +recover image files+ from it. re: http://www.cgsecurity.org/wiki/PhotoRec
    The standard default format they ship with works well for most file types; so if
    you aren't moving OS X or Mac app specific files around on a USB flash drive,
    the original format should be fine. Oh, you can use Disk Utility to attempt to do
    a repair; but in some cases you may have to reformat them, etc.
    {Some of the flash drive warranties or guarantees may vary from between regions;
    so if you have one with a '5 Year' guarantee in the US, other rules may apply in EU,
    or when you seek to replace an item under warranty outside of where it was bought.}
    Good luck & happy computing!

  • Monitor HP w2448hc needs a driver to be used with my Macbook Pro, but HP only offers download to Microsoftprograms,... My screen behave unstable, waves, and I need to do something. Waht do I do?

    Monitor HP w2448hc needs a driver to be used with my Macbook Pro, but HP only offers download to Microsoftprograms,... My screen behave unstable, waves, and I need to do something. Waht do I do?

    Monitor HP w2448hc needs a driver to be used with my Macbook Pro...
    Highly doubtful (see next response.)
    ...but HP only offers download to Microsoftprograms,...
    The software is likely for the built-in webcam.  The monitor/screen portion of the w244hc would NOT need drivers unless it had some funky non-standard amount of pixels.  But the monitor is a standard 1920x1200 which the Mac should detect if you're using the HDMI or DVI connector.
    ...My screen behave unstable, waves, and I need to do something. Waht do I do?
    Are you using the VGA connector?  VGA, being an analog signal is more likely to cause the symptoms you describe (compared to the digital signals DVI or HDMI.)  Often reseating the VGA connector can help.  (IOW, push the VGA connector in harder...on BOTH ends of the cable.)  But VGA would also be more susceptable to signal degradation with anything greater than 1600 pixels.  So if you are using the VGA connector, get the appropriate DVI adapter for your Macbook Pro as soon as you can.

  • Hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    Hello John...
    You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare  here.

  • What procedures do you use in your organisation for requirements analysis..

    What procedures do you use in your organisation for requirements analysis, quality management and change control for your custom abap development?
    which process do you think work best for each stage\phase? is there are sap recommended process for each of these phases?
    thanks
    Bijo

    ezzetabi wrote:I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
    I never saw this particular font, but I second that, fonts is the only thing MS do well imo
    And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
    Of course if you do not use the terminal this post is not for you.
    terminus

  • What browser are you using with OS 9.x?

    Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
    I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
    Again, what browser are you using with OS 9.x and what are its good/bad points?
    Thanks!
    Message was edited by: Paul Stamser

    (Almost forgot
    I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
    For the URL string I use (asterisk)yahoo(asterisk)
    For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
    For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
    I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
    Cheers,
    K.S.
    (I use iCab 3.0.5)
    Message was edited by: K.S.

  • What is the best voice recognition software to use with my macbook pro

    What is the best voice recognition software to use with my macbook pro?

    This a popular one that I have read good things about>
    http://www.amazon.com/s/?ie=UTF8&keywords=dragon+mac&tag=googhydr-20&index=softw are&hvadid=34356472549&hvpos=1t2&hvexid=&hvnetw=g&hvrand=18148534541911339040&hv pone=&hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_95u976ozly_b
    Hope this helps

  • What external web cam can i use with my macbook pro?

    I want to get an external web cam to use with my macbook pro.  which ones will work?  i tried a logitech and my laptop wouldn't consistently recognize it, despite trying with multiple browsers. 

    Apple Compatible Mac Webcams
    iChatUSBCam.  The manufacturer’s website also has a *free* demo of its product & a complete list of USB webcams compatible w/macs & its product.
    For more suggestions, check out EZJim’s website which can be found HERE. <--Clicky click

  • HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3

    HP Pavilion external monitor has stopped working with my Macbook Pro (Mid 2012) with OSX 10.8.3.  When I purchased the monitor a few weeks ago it worked perfectly when computer was in clamshell mode or with lid open. Now external display has stopped working.  When I turn on display it scans for signal but does not find it and then immediately goes into sleep mode.  I am using a DVI connection with the adapter for the mini display plug.  REALLY FRUSTRATING. Any help would be extremely appreciated. 

    Hi lancekatigbak,
    If you're having issues with the display out on your MacBook Pro, you may want to take a look at the troubleshooting steps in the following article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Cheers,
    - Brenden

  • Do i need to reformat a samsung m3 for using with a macbook pro

    Hello
    Do i need to reformat a new samsung m3 for using with a macbook pro?
    I have an old bipra which i use and i just remember literally plugging it in and going.
    thanks for any info.

    I don't know about your particular configuration but usually Disk Utility not recognizing a drive means the drive/card is history.  My G4 running OSX 10.4.11 will format SD cards.
    I don't know your model computer. Is this one with a SD slot built in?  If it is, do you have an external reader, or can you try another card in this slot to see if it is a slot problem?

Maybe you are looking for

  • How can I add a line item to delivery?

    Hi all, How can I add a line item in a delivery without using BDC? Regards! Curtis

  • [solved] SPDIF times out

    Hi, I've connected my PC to a receiver using spdif / iec958 / toslink, which works fine. Except after a few seconds of silence the entire link is powered down which produces an irritating popping sound. Also, there is a small delay before I can hear

  • Data Merge with Indesign

    I am trying to create a large catalog.  I have 3 very different product types that require different info, and therefore I think, completely different templates.  I was thinking that I will need to create three separate data merge templates/ merges,

  • Scanner not working in CS3 or CS4 after upgrade?

    I've been using Photoshop CS3 on my iMac pretty much since it's release and have a Canon Canonscan 4400F scanner which has always worked perfectly. However since I upgraded to Snow Leopard the scanner has been incredibly intermittent and now has fina

  • ADM message TBX buffer: function ThAdmToMys returns RC = -1

    Hello to everyone, I have wrote a program which is loading all our products (aprox. 1300 matnrs) and then in a LOOP at itab is doing the following:   LOOP AT ITAB.     CLEAR WMENGE.     EXPORT WMENGE TO MEMORY ID 'ZGRMENG'.     SUBMIT ZGRRM07MLBD WIT