What monitors are people using w/ there Rage 128 Cards (AGP) ADC/VGA

Need to get a new monitor and wondering if anyone is running a new LDC w/ this card?

thx John. I got the viewsonic VA912b. What a huge screen compared to my old apple 17" studio display CRT/ADC. Just trying to get used to a LCD. All my years of computing have been staring in CRT monitors. There is alittle bit of ghosting w/ LCD but I'm sure if i was using the DVI connection instead of the VGA it would probrably be crisper. But for right now i need to replace my old monitor the cheepest way and I could figure in buying a new video card and monitor at the same time. But maybe in the future i will get a new card and put this monitor up to its full potential. But I got to say it is nice looking into a 19" screen instead of a 17". I can't believe the size difference in the two inches.
Chris.

Similar Messages

What app do people use to make their pictures look like this

what app do people use to make their pictures look like this?

Apparently redchainsaw answered back saying that wasn't it. Though looking at the pictures I see nothing odd or special about them.
With that said however, there are many image editors in the App store, and the Instagram App does have several filters you can apply to the photos. So its very possible that is it.

How do I find out what features are not useful in my Classifier?

How do I find out what features are not useful in my Classifier? I am trying to trim down the number of features to speed up the training of my data, I have about 3700 features. I have found the Filter Based Feature Selection Module and have not been successful
in using it. I have looked through all the examples and have not been able to find any examples using the module. Will the Filter Based Feature Selection Module help me to trim features. If so how do I use it?

One way to do this would be is to use a random forest classifier. Feature/variable importance can be obtained relatively easily with random forests.
Here is how you may do it in R.
> install.packages('randomForest') #install randomForest package in R if it is not already there
> library(randomForest) # reference the library
> data(mtcars) # load motor cars data that ships with
#train a random forest
> mtcars.rf <- randomForest(mpg ~ ., data=mtcars, ntree=1000,keep.forest=FALSE, importance=TRUE)
> importance(mtcars.rf)
> importance(mtcars.rf)
#You will see an output like below
%IncMSE IncNodePurity
cyl 16.168645 169.96741
disp 18.672188 260.08722
hp 17.584375 184.95007
drat 6.948743 63.54528
wt 17.818509 254.30347
qsec 4.772889 33.25546
vs 5.303058 24.39064
am 5.210181 17.36626
gear 4.619161 21.55450
carb 8.577037 28.46715
# or plot the importance as follows
> varImpPlot(mtcars.rf)
What this tells you is how important predictors/features/variables like horsepower(hp), weight(wt), no. of cylinders (cyl) is in predicting miles per gallon (mpg).
If you are wondering how the data looks like. Try this
head(mtcars) # gives first few lines of the data set.
mpg cyl disp  hp drat   wt ...
Mazda RX4     21.0   6  160 110 3.90 2.62 ...
Mazda RX4 Wag 21.0   6  160 110 3.90 2.88 ...
Datsun 710    22.8   4  108  93 3.85 2.32 ...
. Try this
Here is a few useful resources:
Random Forest documentation (Check out the pages on variable importance and variable importance plot)
http://cran.r-project.org/web/packages/randomForest/randomForest.pdf
Motor cars data: http://stat.ethz.ch/R-manual/R-devel/library/datasets/html/mtcars.html

What monitors are compatible with the Mac mini?

What monitors are compatible with the Mac mini?

Is this the new Mini?
Most any Thunderbolt, HDMI, DVI, or VGA monitor will work with the new Mini, though many problems exist with the HDMI port it seems.
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system.
Standard VRAM:
512 MB*
Maximum VRAM:
512 MB*
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

How do i find what ports are being used.

I need to know how to tell what ports are being used and by what. I recently bought Apple Remote Desktop and have been pretty impressed but I have one computer here that won't let me Observe or Control. I think it is because the G4 in question has a program using port 5900. I need to confirm this is there any way that I can see if this port is being used?
Thanks
Moderith

Hi Moderith--
Welcome to the Apple Discussions.
Look in your Utilities folder for the Network Utility program. Open it, and choose "Port Scan" from the row of tabs in its window. If you're not running Network Utility on the problematic G4, use the G4's IP address. But if you're actually on the G4, use "localhost".
Note that if you check the open ports on the G4 from another computer, you won't see as many as if you check it from the G4 itself. That's because some ports are only local. For example, I have enabled the mail server on my Macs, but only to deliver mail, not relay it. So if I do a port scan using "localhost", I see port 25 open, but it's not open from another computer.
charlie

How do I spot what images are RGB using the separations preview?

2 Questions: 1. How do I spot what images are RGB using the separations preview? 2. Is there an easy way to convert those to CMYK without opening each one in PS? I did this before all the time but I'm rusty and can't remember how I did it. I'm on CS6.

You can one of several methods to find out:
(1) You can use the Links panel. Open the Links panel. Go the panel menu and choose Panel Options. In the Panel Options dialog, Under Show Column check "Color Space". Now when you view your Links panel it will show the color space of all linked images.
(2) You could use Preflight, and set up a Preflight Profile. In the profile, go to the Color section > Color Spaces and Modes Not Allowed, and check RGB. Then any RGB images would be flagged.
(3) If you need to know BEFORE you place the images, use Adobe Bridge. Open the folder where the image are. Use the Metadata panel and view the color space of the images.

HT4211 how can you find out what kb are being used by what apps

how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone

Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.

What browser are you using with OS 9.x?

Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
Again, what browser are you using with OS 9.x and what are its good/bad points?
Thanks!
Message was edited by: Paul Stamser

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

What tools are being used with WLS 5.1?

I have been experimenting with WLS 5.1 and it is clear that there are many
steps in developing, testing, and deploying EJBs. What tools are being
used? How do IBM's Visual Age, JBuilder 4, and Visual Cafe EE stack up?
Are there any tools for developing and debugging JSPs?
Thanks,
Mike

Hi folks,
about the "IBM VisualAge 3.02 (Integration Kit)" that Nirav mentions below...
Does this integration kit work with Visual Age 3.5? If not, do you have any tool recommendations for VA3.5 users who are developing apps for WebLogic5.1?
Thanks,
Janet
Nirav Chanchani <[email protected]> wrote:
Mike,
The level of integration between WLS and the tools is as follows (with
VisualCafe being the most integrated) --
1. VisualCafe Enterprise (or the WebGain Studio suite)
http://www.webgain.com/Products/index.htm
2. JBuilder 4 http://www.inprise.com/jbuilder/
3. IBM VisualAge 3.02 (Integration Kit beta up on BEA website)
http://commerce.beasys.com/downloads/weblogic_server.jsp#wlstools
All the integration's support development, local debugging, and local
deployment, but VisualCafe has wizards and like which generate code for the
J2EE specs that WLS supports.
I have read that JBuilder 4 supports JSP debugging but have not tried it yet.
Nirav.
Mike DiChiappari wrote:
I have been experimenting with WLS 5.1 and it is clear that there are many
steps in developing, testing, and deploying EJBs. What tools are being
used? How do IBM's Visual Age, JBuilder 4, and Visual Cafe EE stack up?
Are there any tools for developing and debugging JSPs?
Thanks,
Mike--
Nirav Chanchani
BEA Systems, Inc.

Are people using or incorparating dreamweaver with muse?

Are people using or incorparating dreamweaver with muse?

While there is no direct integration between Muse and Dreamweaver, they can be used together. From within Muse, you can both import and export HTML. So you can import HTML created in Dreamweaver, or export HTML to be opened and edited in Dreamweaver.
The only speedbump is that the code generated by Muse tends to be a bit messy. As a Muse software engineer puts it,
You can output HTML code from Muse at any time, so if you chose to edit it with Dreamweaver that is possible, though we don't optimize our code for human-readability - we instead focus on performance, SEO, accessibility and compatibility.
(Source)

What monitors are compatible with MacBook Pro 13"?

Apart from Apple Cinema, what monitors are compatible with my new MacBook Pro 13"? I need something less expensive than an Apple Cinema monitor, but large enough to reduce my neck/eye strain.
I understand that it has something to do with Thunderbolt.
I am looking at a Benq 27 " LED monitor.

Any monitor that you can adapt a mini-displayport to (for these applications mini-displayport is compatible with thunderbolt). For example HDMI, VGA, single link DVI and dual link DVI. With DVI you need the dual link if the monitor resolution is greater than 1920 x 1200.

I can print from my ipad but what prompt do I use if there's no 'print' option on page?

I'm set up and can print from my ipad but what key do I use if there's no 'print' option on a web page?

Use the little icon that looks like a curved arrow in a box. That should bring up a Print menu, among other things.

What Camera are you using?

Hi,
What camera are you using for you shot?Let share about the Semi Pro cam together: Fix Lens with manual Focus and Zoom,Affortable Price...

Well, before I got my Digital Rebel XT I dreamed of the Powershot S2 IS. Then the S3 came out...but I was hookoed on my Rebel XT. I hear the S5 is a monster...
Now, my 20D is probably more prosumer. I wouldn't call it a pro camera, although it is legendary for it's use on the sports areana and weddings by pros. For my money, any camera with a pop-up flash and automatic modes is not a pro camera. Having said that, I hope no one starts throwing eggs and tomatoes!
-Scott

What launcher are you using?

What launcher are you using with your Z2?
I'm on Nova Launcher Prime with HERAcon theme and icons.

Apex Launcher

What application are you using for student collaboration?

The only part that is missing from iTunes University is real time student collaboration. What application are you using to bridge the gap? Thanks, Ed

Yeah, I'm not sure I know what you mean either.
Q: If you're asking which server-side code to use on Windows IIs Servers?
A: ASP or ASP.net and MSSql. Since Microsoft built these languages, you would get the best support from MS Expression.
If you're asking for software that helps you write code, you'll need to be more specific about which code you want to write and for what purpose.
Nancy O.

What monitors are people using w/ there Rage 128 Cards (AGP) ADC/VGA

Similar Messages

Maybe you are looking for