What motherboard is in the HP 600B?

Which motherboard is in the HP 600B desktop PC (with 2GB RAM, Celeron G1610T CPU and Intel H61 Express chipset)?
Does the motherboard have a parallel port (LPT) pinout for connecting a LPT port bracket?
This question was solved.
View Solution.

Hi,
Based on the following link: No
  http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c03430013/c03430013.pdf
and based on the following it does not have any PCIe slot for you to add PCI/PCIe LPT (Parallel) port(s).
  http://www8.hp.com/emea_africa/en/products/desktops/product-detail.html?oid=5270872
It has 6 USB ports, you can utilise/utilize them.
I think this is a very basic machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • What motherboard and powersupply goes into the D10 6427

    Hi,
    what motherboard goes into the D10 6427? I know the chipset is Intel 5400A, anybody has this information, I tried getting the information from the CSR on online chat but he didn't know.
    Also if anybody could share information on the powersupply and generally that they think about the D10.
    Thanks Much Folks,
    Solved!
    Go to Solution.

    yeah, i had said it above and in another post.   technically it's not proprietary as it is a standard input found on servers.   anyway, here's what i said above:
    the power cable input is a standard IEC320 C19 plug found on rack-mount servers for better compatibility in a server farm.   the D10 includes a 125V IEC320 C19 female to NEMA 5-15P male power cord to work in a standard household jack.
    the PSU input is an IEC320 C19 jack.   this is what the corresponding plug looks like.   the other end of the cable is a standard household NEMA 5-15P plug that looks like this.
    the D10 will work in your home or office just fine.   if you need something longer then there are many companies who manufacture IEC320 C19 to NEMA 5-15P cables.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • What motherboard does the hp pavilion dv6-2140ca have?

    Hey guys.  Does anyone know what motherboard the HP Pavilion dv6-2140ca has?  I can't find the service manual anywhere.
    My bios is corrupt, and would't fix after a reflash or changing the CMOS battery.  Time for a motherboard replacement.
    Thanks for the help!
    James
    This question was solved.
    View Solution.

    Here is the Manual...it is the same for the whole dv6 series:
    Manual
    You can find the motherboard part number inside the memory slot under the modules. Laptop motherboard are one-off specific items...you have to get the exact HP motherboard for a replacement.

  • What are some of the advantages/disadvantage of using FC or FCoE with a storage array (EMC)? What is Cisco's recommendation and why?

                       What are some of the advantages/disadvantages of using FC or FCoE for a storage array? What does Cisco recommend?

    This is what I'm considering:
    Power:
    1050W Seasonic 80PLUS Gold Power Supply
    Motherboard:
    ASUS, Rampage IV Extreme, 2011, SATA6, True Quad SLI/XFIRE, Extreme OC Capable
    CPU:
    Intel Core i7-4960X 3.60GHz, 2133MHz DDR3, 15MB Cache, Hex Core Processor
    System Memory:
    16GB (4 x 4GB) , PC3-19200, 2400MHz (G.Skill - x79)
    Video Adapter 1:
    NVIDIA GeForce GTX 780ti 3GB GDDR5
    Video Adapter 2:
    None
    Optical 1
    16X Blu-ray Burner - 16xBD-R, 2xBD-RW/16xDVD-R, 8xDVD-RW/48xCD-R, 24xCD-RW
    Bay Accessories 1
    NZXT Aperture M Multi-media Hub
    RAID [Requires Identical Hard Drive Selections]
    RAID 0 | 2 Disk Min. Striped set, improved performance, additional storage drive highly recommended
    Hard Drive 1
    Crucial M550 1TB 2.5" SATA III 6GB/sec Solid State Drive
    Hard Drive 2
    Crucial M550 1TB 2.5" SATA III 6GB/sec Solid State Drive
    Hard Drive 3
    Crucial M550 1TB 2.5" SATA III 6GB/sec Solid State Drive
    Sound Card
    Creative Labs Sound Blaster Z PCI Express

  • What Motherboard is this ? (image inside)

    What Motherboard is this with only 3 SATA ports onboard,  the box looks like a P35 Neo2-FR or P35 Neo2-FIR ... but where are the 5 SATA ports ?
    www.nikev.pwp.blueyonder.co.uk/neo2.jpg
    .

    That seems to be a picture of an early P35 Platinum,Neo2-FR/FIR or P35 Neo2 beta revision.
    These boards basically all have the same PCB and use the same BIOS.  Where did you find the picture?
    Have a look at this one for comparison:
    http://global.msi.com.tw/index.php?func=proddesc&prod_no=1261&maincat_no=1&cat2_no=170#
    /Edit:
    None of these boards were released with only 3 SATA ports.   The picture was probably used for early marketing purposes when no finished exemplars were available.

  • What motherboards can I use to upgrade a ze5300

    My parents have a ze5300 laptop and i want to upgrade the motherboard and CPU.  Can someone let me know what motherboards I can use?  I also need to upgrade the wireless to use WPA2
    Thanks
    This question was solved.
    View Solution.

    Sorry, but you can't upgrade the motherboard in a laptop computer. The motherboard and chassis are specifically built to fit each other at the time of manufacture. If you want to use a newer CPU and newer wireless technology, consider purchasing a new laptop computer.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • What is wrong with the cloned HD?

    Hi, there,
    I have a G4 Sawtooth, 1.3 GHz, 1.6 GB RAM, with an ACARD ATA-100. An 80 GB HD is connected to the ATA bus of the motherboard, and an 160 GB HD to the ACARD. I cloned Mac OS 10.4.10 from the 80 GB HD to the 160 GB HD. I could boot the 160 GB cloned HD to the window when I was asked about the name and password. I used the name and password, which I have with my original HD. However, the window just shook my password off. I used the installation disc for resting password, and found there was no name or password for the cloned. Besides, the box for entering the name was obscured in gray that I could not enter a name there.
    What is wrong with the clone? What should I do to make the clone HD completely bootable?
    Thanks.
    Robert

    Inasmuch as you've provided little helpful information about how you prepped the drive and cloned it, all I can do is suggest the following:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.

  • What motherboard in my 3000 N100 0768-A53?

    Hi guys! Have a problem with my Lenovo 3000 N100 0768-A53. Every time I hit the power button all it does is the heatsink fan spins and I hear the DVD drive and that's it! No beeps, screen is completely blank so no error codes. I removed DVD drive, hard drive, and ram from the laptop and still no go. From what I've been reading on the forums, it sounds like I need to replace the motherboard?  
    Now, if that is the case, I am confused on which motherboard I need for this laptop. According to the parts list on the lenovo web site my laptop uses motherboard model number 41W1201. Im I correct?  BUT, when I removed the ram from the laptop I was able to see the sticker on the motherboard with model number 41W8032.
    Why does the web site say one motherboard model and I have different model installed ? What's the difference between both motherboard models?  Can I purchase either motherboards and transfer the CPU, DVD drive, ram.... From the old unit and use it with the new with no problems?
    Thanks for the help guys

    Hi, did you ever get this solved? I have the same problem.
    http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/3000-N200-0769-EGG/td-p/1046629
    Kenneth

  • Which motherboards compatible to the 41W1489 motherboard used in my T61 model 7664-16U?

    I need a new motherboard. The 41W1489 in my T61 model 7664-16U is dead. Which other motherboards, if any, are compatible? What differences, if any, do those other motherboards have compared to my 41W1489?
    It appears there have been problems with the Nvidia Quadro NVS 140M which I believe is part of my 41W1489 motherboard. If that is true and if the Intel graphics are better, than I would prefer to use a motherboard that has that Intel graphics as long as it is compatible with my model 7664-16U's features and operation.
    Can I simply replace my 41W1489 motherboard with any you tell me are compatible or are there additional things I must do such as, for example, using another plastic base or changing anything else? I am already aware that if there are compatible motherboards that have the Intel video instead of the existing Nvidia video and I use any of those motherboards, I will have to install new drivers for that video.
    Just to be safe, here is a list of some of the features of my machine. If any of them will not work with motherboards that you tell me are compatible with my 41W1489 motherboard, please let me know:
    -modem port & modem motherboard daughter card lenovo fru 39T0495
    -3 usb ports
    -external VGA port
    -dvd burner/cd drive, lenovo fru 39T1851
    -cpu: intel 2.0 GHz T7300
    -bluetooth
    -wifi motherboard daughter card intel 4965AGN
    -sound, including the existing sound ports for microphone and line output
    -firewire 1394 port
    -ethernet port
    -two cards of 2GB PC2-5300 memory, total of 4GB
    -existing 14.1" widescreen display
    Thank you very much for any help you can give me.

    Hi! 
    According to your model type you have a 14.1 T61 wide
    T7300(2GHz), 1GB RAM, 120GB 5400rpm HD, 14.1in 1440x900 LCD, 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Turbo Mem, 6c Li-Ion, WinVista Business
     The HMM (Hardware Maintenance Manual) states these two FRU number for Intel boards:
    -41W1487 
    -42W7866  
    I know there are more numbers than these two, but at least you can start searching for those until other forum members can add more FRU's. These Intel boards will need a different heatsink (FRU# 42W2460, 44C0825 ) so you will need to look for one of those too.
    The HMM has documented all steps you need to follow to change/swap parts, I would start downloading it as a first step. You can find it here => click me  
    /L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
    A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество

  • I can't find out what motherboard I have for my HP Pavilion 15t-n200

    Hi
    I have a HP Pavilion 15t-n200 and I can't find out what motherboard I have . I have been searching for answers for days now and have decided to come to the forums.
    The specs are:
    i5-4200u 1.6 GHz - 2.3 Ghz
    8GB DDR3 RAm/Memory
    64-bit Operating System
    Windows 8.1
    If anyone could help me find out what mother boar I have that would be great.
    This question was solved.
    View Solution.

    Here is the Service Manual:
    Manual
    See Page 20
    You have one of these boards depending on which video chip you have and which version of Windows. The processor is soldered to the board.
    Intel Core i5-4200U 740M 1.6-GHz (2 GB DC BGA 15 W) for use with Windows Standard 736377-501
    Intel Core i5-4200U 740M 1.6-GHz (2 GB DC BGA 15 W) for use with Windows Professional 736377-601
    Intel Core i5-4200U 840M 1.6-GHz (2 GB DC BGA 15 W) for use with Windows Standard 751494-501
    Intel Core i5-4200U 840M 1.6-GHz (2 GB DC BGA 15 W) for use with Windows Professional 751494-601
    Intel Core i5-4200M 840M 1.6-GHz (2 GB DC BGA 15 W) for use with Windows Standard 754312-501
    Intel Core i5-4200U 8670M 1.6-GHz (2 GB DC BGA 15 W) for use with Windows Professional 754312-601
    So look at device manager under Display adapter and do you have regular Windows 8.1 or 8.1 Pro?
    Why do you need to know what model motherboard you have?
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • What's wrong with the Finder?

    I don't understand it, When I select multiple items in a list, either by command-click or shift-click, when I attempt to move them or copy them, the moment I start to drag them I'm only holding one item, or half of what I selected. The rest of the selected files or folders stay put.
    Also does anyone else have this problem.... In TextEdit or any other application, when I just click inside a window the default system highlighter becomes active. Meaning when you select text it becomes highlighted, well I'm just clicking in a TextEdit window to make the window active and it highlights whatever I click, especially when returning from another application or window.
    Also in the finder or any other app. for that matter, but mostly in finder when I select multiple files or folders by command click, all of a sudden, it just depends when it wants to, all of the files or folders will open at once. So files open without being double-clicked. I checked my mouse preferences and that's not the issue, My double-click speed is fairly low and I'm not ripping through the list speed clicking everything. I'm all software updated, ran permissions, cleaned cache files, including font cache, re-boot nothing works. What's going on.

    Dumpfbacke. thanks for getting back.
    That was one of the first things I did.
    Battery status shows 83% good for 30 days
    there is also what's called LCC Connection utility, which allows you to
    troubleshoot, well, connection issues and that's fine. I guess the mouse may just
    be on the fritz.

  • What's wrong with the display?!

    Of my many macs, one is an iMac snow. It still works pretty good, and recently I put in a new harddrive and installed Mac OS X onto it. It's been working perfectly fine for the last few months now. However, just early today the display went bonkers. My little sister was playing a game, and it said that in order to play the game, the colors must be set to 256. So I clicked okay and changed the settings from millions to the settings the game needed. When she was done playing the game, however, the colors were all messed up. I tried restarting the computer first, but that didn't work so I went into the preferences and tried to fix the color there. Still, nothing worked. I don't know what's wrong. The colors are in the negitive. Everything that is supposed to be white is black, everything that's supposed to be black is white, everything that's supposed to be blue is red, and so forth. I can't get it off this negitive effect. Can someone please help me out?! Any advice will be greatly appreciated!

    Wow... thanks a bunch. That was SOOOO simple. I feel so stupid now. Just one click, and I sooo overpassed it earlier. -_- Agh.
    Thanks!!!

  • In version 3.6 I can not open a website link from original page, I keep getting a new window that is blank and asking me to put in a web address. What has changed with the new version?

    When on a page if I click on a web link I get a new window that is blank and asks me enter a web address. This started happening with the new 3.6 version. It seems to have something to do with what I choose for the location in my privacy settings as the window changes with each setting but I still cannot get to the new site. Any ideas? I have no problem with this in IE and I have to keep opening IE when I encounter the problem on Firefox which is annoying.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Problems with Syncing iPhone 3G (4.2.1. iOS).  What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up.  I noticed that my name has been replaced to "untitled playlist". Whats wrong

    Problems with Syncing iPhone 3G (4.2.1. iOS).  What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up.  I noticed that my name has been replaced to "untitled playlist". Whats wrong

    Welcome to Apple Discussions!
    Maybe a long shot, but WD is not known for the quality of some of their enclosures, although I do like the drives themselves. It may be worth mounting this drive in a different enclosure, something like one of OWC's FireWire enclosures with the highly reliable Oxford chip sets. I wouldn't be inclined to trust a WD enclosure, especially if it already seemed to be acting in a flakey manner.
    Here's an example of what I mean:
    http://eshop.macsales.com/item/Other%20World%20Computing/MEP924FW8E2O/
    I have 3 of these and I really like them.
    From what I understand, if the drive spins up, it is often possible to recover data from it. To be absolutely certain to destroy the data, you just about have to take a hammer to the disk. Hopefully, there will be a way to get your data back.
    Good luck!

  • Is there a separate download for iMac.  I bought and downloaded what I thought was the right download but it is not working and feel it might be a windows version.  How doe I get it right

    s there a separate download for iMac.  I bought and downloaded what I thought was the right download but not working and feel it might be a windows version.  How doe I get it right

    Check the link below for requirements and instructions for upgrading to Snow Leopard (10.6)
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Maybe you are looking for