What must be the configuration for EPMA profile to load a dimension

Hi guys I am using EPMA profile to load information of table interfaces. I am facing that some members are loading as shared when I upload the same data
so when the dimension is updated they are marked as shared. I am using the method "Merge as Primary" and "Merge to Bottom", because I only need to update
the members that exists and add the new ones.,
Maybe this method is not the correct, any help will be appreciated.
Thanks in advance.

You might have an option as "Replace" in profile due to which it will replace all the members before loading it. This is if you want to set at profile level
If not, You can Delete before load when you use EPMA Batch Client
Regards
Amarnath

Similar Messages

What must be the SOAP Action for Soap Receiver?

Hi,
Below is part of wsdl file. I'm using mtd1 method in it.
This is an Axis generated wsdl.
part of wsdl
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xx.com/yy/Wsdl">
 <wsdl:types>
 <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:acbase="http://schemas.xx.com/yyTypes" targetNamespace="http://schemas.xx.com/yy/Types" elementFormDefault="qualified">
What must be the SOAP Action for SOAP Receiver?
Thanks

>
Cemil Bozlagan wrote:
> Hi,
> Below is part of wsdl file. I'm using mtd1 method in it.
> This is an Axis generated wsdl.
>
>
> part of wsdl
> <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xx.com/yy/Wsdl">
> <wsdl:types>
> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:acbase="http://schemas.xx.com/yyTypes" targetNamespace="http://schemas.xx.com/yy/Types" elementFormDefault="qualified">
> ....
> ....
>
>
> What must be the SOAP Action for SOAP Receiver?
>
> Thanks
find you answer here - /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

Apple Configurator: The configuration for your iPad could not be downloaded from organisation . Invalid Profile.

Good afternoon,
I am really struggling with a deployment of 10 iPad Minis.
The iPads are brand new and I have downloaded and installed Apple Configurator onto our Apple Air laptop.
I have configured Apple Configurator in the following way:
Under Prepared:
Settings
Name is ticked with 'Number sequentially starting at 1'.
Supervision is ticked to on, Allow devices to connect to other Macs is also ticked.
Update iOS is set to "When update is available". Erase before installing is ticked.
Restore is set to "Don't restore backup".
No profiles are listed in the profiles section.
Apps
I have copied in some appropriate apps.
Setup
Skip: Restore, Passcode, Siri, Touch ID, Apple Pay, App Analytics all ticked.
I have not configured Device Enrollment.
In "Configure Settings..." Device Enrollment is not configured.
After preparing my iPads, they all connect and prepare correctly. When I select any iPad and unlock it, the following happens:
Hello, slide to setup
Select language, UK selected
Select Your Country or Region, UK selected
Choose a Wi-Fi Network, correct network selected and authenticated
Location Services: Enabled
Configuration, "<organisation> can automatically configure your iPad". Apply Configuration or Skip Configuration. Apply selected.
Configuration, "The configuration for your iPad could not be downloaded from <organisation>. Invalid Profile.
Apple Configurator is showing no errors, have tried Supervise>Reset, makes no difference.
Have skipped configuration and erased iPad before trying again, same problem.
Any suggestions would be really appreciated.

FYI - This is an iPad user to user forum. Apple doesn't read the forum posts.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul
Can you post the output of below query
select @@version.
If you are using SQl server express edition ,SQL server agent feature is not available.It seems from errorlog that you can start it but actually you cannot.But first confirm what is version and edition of your SQL server
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Canon 100m f/2.8 L IS USM Macro Lens - What's in the Box for real?

I want to purchase the Canon 100m f/2.8 L IS USM Macro Lens, and the website says the only thing in the box is the lens itself and a manual.
I realize that at the very least the Lens Cap and Cover MUST be included, but then I called customer service to confrim the rest, and they said the contrary, "only the manual and lens, with no cap or cover".
Obviously that was an non-conscientious rep who didn't care if the answer was accurate or not, so I need some help from those of you who are owners... or at least a BestBuy rep who is conscientious.
Canon confirms that what is supposed to be in the box with this "L" series lens
Lens + Lens Cap + Lens Cover + LENS HOOD + LENS POUCH (the capitalized items are included because its an "L" Series lens.
Can someone confirm What's in the Box for real? Does it have these items or not?
Thanks
Solved!
Go to Solution.

Hi mikewinburn,
I definitely apologize for the inaccurate information given to you from the customer service representative you spoke to. This lens is sent to us directly from Canon, and should have everything inside their packaging that they told you would be in the box. I have no direct knowledge of what comes packaged with this lens (although I wish I did, and this is actually one of the lenses that I intend on purchasing in the near future). If Canon told you that there would be the lens, the lens cap, the lens cover, a lens hood, and a lens pouch inside the packaging then that is what should be inside the box if you purchase this lens from us. I hope this clears this up for you, but if you need any personal assistance from me just send me a private message by clicking on the link in my signature.
Thanks for posting,
Allan|Senior Social Media Specialist | Best Buy® Corporate
Private Message

What could be the reason for continuous Full GC's during application startu

What could be the reason for continuous Full GC's during application (webapplication deployed on tomcat) startup?
JDK 1.6
Memory settings
-Xms1024M -Xmx1024M -XX:PermSize=200M -XX:MaxPermSize=512M -XX:+UseParallelOldGC
jmap output is below
Heap Configuration:
MinHeapFreeRatio = 40
MaxHeapFreeRatio = 70
MaxHeapSize = 1073741824 (1024.0MB)
NewSize = 2686976 (2.5625MB)
MaxNewSize = 17592186044415 MB
OldSize = 5439488 (5.1875MB)
NewRatio = 2
SurvivorRatio = 8
PermSize = 209715200 (200.0MB)
MaxPermSize = 536870912 (512.0MB)
Verbose GC logs
==========
0.194: [GC [PSYoungGen: 10489K->720K(305856K)] 10489K->720K(1004928K), 0.0061190 secs] [Times: user=0.01 sys=0.00, real=0.00 secs]
0.200: [Full GC (System) [PSYoungGen: 720K->0K(305856K)] [ParOldGen: 0K->594K(699072K)] 720K->594K(1004928K) [PSPermGen: 6645K->6641K(204800K)], 0.0516540 secs] [Times: user=0.10 sys=0.00, real=0.06 secs]
6.184: [GC [PSYoungGen: 262208K->14797K(305856K)] 262802K->15392K(1004928K), 0.0354510 secs] [Times: user=0.18 sys=0.04, real=0.03 secs]
9.549: [GC [PSYoungGen: 277005K->43625K(305856K)] 277600K->60736K(1004928K), 0.0781960 secs] [Times: user=0.56 sys=0.07, real=0.08 secs]
11.768: [GC [PSYoungGen: 305833K->43645K(305856K)] 322944K->67436K(1004928K), 0.0584750 secs] [Times: user=0.40 sys=0.05, real=0.06 secs]
15.037: [GC [PSYoungGen: 305853K->43619K(305856K)] 329644K->72932K(1004928K), 0.0688340 secs] [Times: user=0.42 sys=0.01, real=0.07 secs]
19.372: [GC [PSYoungGen: 273171K->43621K(305856K)] 302483K->76957K(1004928K), 0.0573890 secs] [Times: user=0.41 sys=0.01, real=0.06 secs]
19.430: [Full GC (System) [PSYoungGen: 43621K->0K(305856K)] [ParOldGen: 33336K->54668K(699072K)] 76957K->54668K(1004928K) [PSPermGen: 36356K->36296K(204800K)], 0.4569500 secs] [Times: user=1.77 sys=0.02, real=0.46 secs]
19.924: [GC [PSYoungGen: 4280K->128K(305856K)] 58949K->54796K(1004928K), 0.0041070 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
19.928: [Full GC (System) [PSYoungGen: 128K->0K(305856K)] [ParOldGen: 54668K->54532K(699072K)] 54796K->54532K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.3531480 secs] [Times: user=1.19 sys=0.10, real=0.35 secs]
20.284: [GC [PSYoungGen: 4280K->64K(305856K)] 58813K->54596K(1004928K), 0.0040580 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
20.288: [Full GC (System) [PSYoungGen: 64K->0K(305856K)] [ParOldGen: 54532K->54532K(699072K)] 54596K->54532K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2360580 secs] [Times: user=1.01 sys=0.01, real=0.24 secs]
20.525: [GC [PSYoungGen: 4280K->96K(305856K)] 58813K->54628K(1004928K), 0.0030960 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
20.528: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54532K->54533K(699072K)] 54628K->54533K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2311320 secs] [Times: user=0.88 sys=0.00, real=0.23 secs]
20.760: [GC [PSYoungGen: 4280K->96K(305856K)] 58814K->54629K(1004928K), 0.0034940 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
20.764: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54533K->54533K(699072K)] 54629K->54533K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2381600 secs] [Times: user=0.85 sys=0.01, real=0.24 secs]
21.201: [GC [PSYoungGen: 5160K->354K(305856K)] 59694K->54888K(1004928K), 0.0019950 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
21.204: [Full GC (System) [PSYoungGen: 354K->0K(305856K)] [ParOldGen: 54533K->54792K(699072K)] 54888K->54792K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2358570 secs] [Times: user=0.98 sys=0.01, real=0.24 secs]
21.442: [GC [PSYoungGen: 4280K->64K(305856K)] 59073K->54856K(1004928K), 0.0022190 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
21.444: [Full GC (System) [PSYoungGen: 64K->0K(305856K)] [ParOldGen: 54792K->54792K(699072K)] 54856K->54792K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2475970 secs] [Times: user=0.95 sys=0.00, real=0.24 secs]
21.773: [GC [PSYoungGen: 11200K->741K(305856K)] 65993K->55534K(1004928K), 0.0030230 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
21.776: [Full GC (System) [PSYoungGen: 741K->0K(305856K)] [ParOldGen: 54792K->54376K(699072K)] 55534K->54376K(1004928K) [PSPermGen: 36538K->36537K(204800K)], 0.2550630 secs] [Times: user=1.05 sys=0.00, real=0.25 secs]
22.033: [GC [PSYoungGen: 4280K->96K(305856K)] 58657K->54472K(1004928K), 0.0032130 secs] [Times: user=0.00 sys=0.00, real=0.01 secs]
22.036: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54376K->54376K(699072K)] 54472K->54376K(1004928K) [PSPermGen: 36537K->36537K(204800K)], 0.2507170 secs] [Times: user=1.01 sys=0.01, real=0.25 secs]
22.289: [GC [PSYoungGen: 4280K->96K(305856K)] 58657K->54472K(1004928K), 0.0038060 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
22.293: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54376K->54376K(699072K)] 54472K->54376K(1004928K) [PSPermGen: 36537K->36537K(204800K)], 0.2640250 secs] [Times: user=1.07 sys=0.02, real=0.27 secs]
22.560: [GC [PSYoungGen: 4280K->128K(305856K)] 58657K->54504K(1004928K), 0.0036890 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
22.564: [Full GC (System) [PSYoungGen: 128K->0K(305856K)] [ParOldGen: 54376K->54377K(699072K)] 54504K->54377K(1004928K) [PSPermGen: 36537K->36536K(204800K)], 0.2585560 secs] [Times: user=1.08 sys=0.01, real=0.25 secs]
22.823: [GC [PSYoungGen: 4533K->96K(305856K)] 58910K->54473K(1004928K), 0.0020840 secs] [Times: user=0.00 sys=0.00, real=0.01 secs]
22.825: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54377K->54377K(699072K)] 54473K->54377K(1004928K) [PSPermGen: 36536K->36536K(204800K)], 0.2505380 secs] [Times: user=0.99 sys=0.01, real=0.25 secs]
23.077: [GC [PSYoungGen: 4530K->32K(305856K)] 58908K->54409K(1004928K), 0.0016220 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
23.079: [Full GC (System) [PSYoungGen: 32K->0K(305856K)] [ParOldGen: 54377K->54378K(699072K)] 54409K->54378K(1004928K) [PSPermGen: 36536K->36536K(204800K)], 0.2320970 secs] [Times: user=0.95 sys=0.00, real=0.23 secs]
24.424: [GC [PSYoungGen: 87133K->800K(305856K)] 141512K->55179K(1004928K), 0.0038230 secs] [Times: user=0.01 sys=0.01, real=0.01 secs]
24.428: [Full GC (System) [PSYoungGen: 800K->0K(305856K)] [ParOldGen: 54378K->54950K(699072K)] 55179K->54950K(1004928K) [PSPermGen: 37714K->37712K(204800K)], 0.4105190 secs] [Times: user=1.25 sys=0.17, real=0.41 secs]
24.866: [GC [PSYoungGen: 4280K->256K(305856K)] 59231K->55206K(1004928K), 0.0041370 secs] [Times: user=0.01 sys=0.00, real=0.00 secs]
24.870: [Full GC (System) [PSYoungGen: 256K->0K(305856K)] [ParOldGen: 54950K->54789K(699072K)] 55206K->54789K(1004928K) [PSPermGen: 37720K->37719K(204800K)], 0.4160520 secs] [Times: user=1.12 sys=0.19, real=0.42 secs]
29.041: [GC [PSYoungGen: 262208K->12901K(275136K)] 316997K->67691K(974208K), 0.0170890 secs] [Times: user=0.11 sys=0.00, real=0.02 secs]
Edited by: 807460 on Feb 6, 2011 8:28 PM

What do you see if you use the least number of options you need to start the application. I would try just
-mx1024M -XX:MaxPermSize=512M I would only add options which appear to improve performance.

What is quick upload configuration for downloads?

What is quick upload configuration for downloads? I cannot get downloads to open because of the box popping up wanting some kind of configuration.

I have the same question as nyswaner and have been using macs for the past 20 years. The problem just popped up recently. I can download but am unable to open the file. It asks for right clicking and selecting a favorite folder. Under Details (on the following screen) it asks for a Host, then wants a username and password. I'm having this problem on a home computer that is not connected to a virtual private network. I've been running Fusion5 (virtual machine) to comply with my organization's WindowsXP operating sytem, for a single application but deleted it as I can get the info now on my iPad and iPhone. Is there anybody out there who has the same problem and was able to solve it? The software I downloaded is for specific use with the Mac operating system and having to use a proprietary Windows browser to open Mac software can't possibly be true. BTW nyswaner, Parallels and Fusion are software applications that enable you to run Windows on your Mac computer in a "virtual machine"

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

Error in the configuration for sap logon tickets

Hi Forum,
I use Tcode crmd_order_bp to see the BP cockpit and the error message displays as
Error in the configuration for SAP logon tickets
But if I click "Yes", system displays cockpit.
How can I avoid this error.
Thanks in advance
Regards
Shridhar

You will still need to configure SSO (either by logon ticket or username/password). The data source access is done using the username/password configured in the UM Config dialog box.
I can see where you're coming from with your thinking, however logon-ticket-based SSO is probably the best approach.
Cheers,
Darren.

What may be the reasons for my iphone switching off all of a sudden and how do i prevent it?

what may be the reasons for my iphone switching off all of a sudden and how do i prevent it?

With the home page on display, in the menus select View, then Zoom and then Reset
For details on the zoom features see [[page zoom]] and [[text zoom]]

Where is the configuration for revaluation of FX to GL

we have a number of transactions in which a supplier in Germany packs product for us and sends that product directly to our Atlanta plant for storage. They invoice us in Palm Beach,FL for the product and we charge it to Manufacturing. That is an intercompany transaction. The original invoice is denominated in Euros and we never settle the intercompany transactions with Chicago so they stay outstanding forever. SAP does a revaluation entry every month and the FX effect hits our GL account xx100. That is a P&L account and affects our operating results. There should be no P&L effect to intercompany transactions. We have other intercompany documents with other of our entities, but SAP posts the FX effect on those to GL acct yy200, which is a balance sheet account and does not affect results.
We need these SAP monthly revaluations to post to yy200 and not xx100. Is it possible to configure SAP so that currency transactions related to intercompany documents post to GL account yy200 instead of xx100?
Gurus
Here is my question : How to proceed ? where is the configuration for revaluation of FX to GL Account?
Thanks in adavance
Satya

Well first of all to distinguish Intercompany FX transactions and other FX transactions, you should have a seperate document type for them and then based on the document type, you can actually write a validation/substitution rule to have those differences to the account you want.
Hope it helps - Let me know if you need more informarion.
Thanks,
Nandita

With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.

With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.

Where did you come up with the $700 figure?
Photography plan - $9.99/month or $119/year - Creative Cloud Photography plan : Adobe Creative Cloud
Single App - $19.99/month
Complete plan - $49.99/month or $599/yr - Creative Cloud free trial & plans : Adobe Creative Cloud
Ah - If you wish to cancel early yeah $74.99 which would total for the year at $899.88. But that final total would be if you canceled in the 12th month but if you plan on keeping it that long might as well go for the annual contract. Then cancel at the end of the term limit if you need to.
If you are not sure what to get, Either Elements as was suggested by Peru Bob or the photography plan.

What should be the procedure for export parameter in CATT

Hello Everybody,
I am working with CATT, and the transactions are ME21N and MIGO.
when i am executing the transaction ME21N i will get the Pur Ord Noin the message, and i would like to export Pur Ord No to the transaction MIGO as thr is one field named Purch.ord no in Migo.
what should be the Procedure for exporting a parameter?
Thanks,
Regards Afroz

Hello Afroz,
If you are using eCATT then following is the procedure of capturing messages in the two recording methods - TCD & SAPGUI.
=> TCD Recording Mode:
In TCD recording mode, after dobleclicking on Interface name from the TCD command in the editor on left side, just before the MSG folder DYNPRO folder will appear on right side.
-This DYNRPO folder contains the screen sequences contain the screen occurred during recording time. The last Dynpro of this folder contains the messages occurred during recording.
-Select this last folder & click on Simulate Screen icon of the same Interface editor. It will redirect to the screen where the message values exist. There select the Purchase Order Number and click on Read Field Value icon. Give the name of Export Variable.
The export variable will contain the value of the purchase order number, which can be passed to MIGO.
=> SAPGUI Recording Mode:
In the SAPGUI recording mode, the screen on which the message appeared will be used to capture the variable name, which is Purchase Order Number in this case.
If the Purchase Order Number is second variable of the message displayed(e.g. Purchase Number 2122323 Is Created)
then use the following code -
e.g.
MESSAGE ( MSG_1 ).
SAPGUI ( ME21N_4001_STEP_5 ).
ENDMESSAGE ( E_MSG_1 ).
Assing the value from the message to the export
parameter
P_EC_PurOrdNo = E_MSG_1-[1]-MSGV2.
There are total four MSGV1-MSGV4 variables. Dobule click on MSG_1 of the MESSAGE statement above. Putting the value in the export variable from the right message variable will give the purchase order number.This can be passed as MIGO.
Regards

Empties management: The configuration for Empties Management

The configuration for Empties Management path
IMG -> S&D -> Sales -> Emties Management not appearing in ECC 6.0.

HI,
http://help.sap.com/saphelp_rc10/helpdata/en/43/010e22ab24235de10000000a1553f7/content.htm
http://help.sap.com/saphelp_bev461/helpdata/en/bd/958a3938822a4de10000000a11402f/frameset.htm
KAPIL

What will be the cost for iphone 5 replacement which is in warrenty but accidentally damaged.not screen it's just back glass of camera,so what will be cost to fix it or replace the phone in indian rupees, USD will work.

what will be the cost for iphone 5 replacement which is in warrenty but accidentally damaged.not screen it's just back glass of camera,so what will be cost to fix it or replace the phone in indian rupees, USD will work.

If you are in India, contact your local service center for a price quote. I don't know if Indian service centers can replace just the back glass or if they will need to replace the entire iPhone. To locate a service center, see:
https://locate.apple.com/in/en/
Make sure you select "iPhone" for the product time. Only certain service centers can handle iPhones.
Regards.

What must be the configuration for EPMA profile to load a dimension

Similar Messages

Maybe you are looking for