What must I do to get the   sign in my iphone 4s calendar to add an event?

What must I do to get the + sign in my iphone 4s calendar to add an event?

Randers4, thank you for your assitance, you instructions worked perfectly...

Similar Messages

  • What must I do to get the netlet to load?

    Ok.. I didn't install our portal server so perhaps there were some configuration steps that may have been missed .. but ..
    Netlet is an option for my desktop. I chose it. I then go into edit mode and I try to set it up to telnet out to a remote server.
    I try getting it to allow me to ftp into the portal.
    It's always in the loading mode!
    Nothing I do seems to work...
    Can anyone suggest some simple steps that I can take to get this thing to work?
    would be much appreciated .. sincerely .. jesus ..

    For ex., use a telnet to test the netlet.
    Configure this using the netlet channel and do an edit and add the
    known telnet ( for ex., pick your unix machine where u installed portal server as a test case).
    Then from the browser perspective pick the Java Console. This
    will tell u the java exception thrown when there is an issue.
    otherwise this will tell u the netlet rule which is using etc.,
    and Portalserver admin guide is the best place to additional
    information if u land into any issues in configuring it.
    Keep in mind that current Portal Server 3.0 version doesn't support
    Java plugins like 1.3 etc., Hence the java console debugging. Which
    will tell u what version of java used with the browser.

  • I have been trying for three days to try and get this working , and tried a few of the forum suggestions already and this is just to try them ... so glad i haven't pais anything yet . i get the signed out loop no matter what i try

    i have been trying for three days to try and get this working , and tried a few of the forum suggestions already and this is just to try them ... so glad i haven't pais anything yet . i get the signed out loop no matter what i try

    What have you been trying for three days to try and get this working???
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • When pushing alt + L not the @ sign appears, but a turned L. What can I do to get the @?

    When pushing alt + L not the @ sign appears, but a turned L. What can I do to get the @?

    Tried it already, does not work for @. Any other ideas?

  • Iphone 4s coming friday, what is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across.

    What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.

    First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
    Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
    Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
    Please tell me if you have any problems with backing up.
    Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
    Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
    Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
    Please tell me if you need any help.
    I hoped I answered your questions and solved your problem!

  • On an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?

    on an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?
    I belive that the trigger is being changed on the io board, but cannot manage to reset it.
    The reset process takes in the order of 0.1 sec, and since this is a time critical application, i want to get the scanning function working again faster

    Dear Ian. Thank you for your reply. The problem appears to be that the scan trigger(s) are stopped, or something, by the use of the AI_setup instruction. The sytstem works perfectly until this instruction is used. My problem is in understanding what has happened since the help seems to give no detail on any interconnection between the scan system and the external analog trigger system. I have tried to reconnect the triggers, but so far unsucessfuly

  • HT4721 How do you get the @ sign on a Macbookair?

    How do you get the @ sign on a Macbookair?

    What nationality keyboard? On a UK Qwerty kb with an iMac it is Shift 2: @ - does that not work on a MBAir?
    Check System Preferences>Keyboard>Keyboard tab, tick 'Show keyboard & Character viewer in the menu bar', then select 'Show Keyboard Viewer' from the menu bar, press the Alt/Shift/Control keys and it should show where all the various characters are located.

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

  • MY KEY BOARD IIGHTS ARE ON  BUT NO MATTER WHAT I DO I CAN GET THE SCREEN LIGHT ON

    my key board lights are on., but no matter what i do i cannot get the screen of my mac pro on

    Apple computers: Troubleshooting issues with video on internal or external displays
    Scroll down to Reset the system

  • It keeps giving me an error message when I go to download my purchases. I follow the directions and it just keeps giving me the same error. What do i do to get the songs

    It keeps giving me an error message when I go to download my purchases. I follow the directions and it just keeps giving me the same error. What do i do to get the songs?
    It just keeps telling me they were inturupted but i didnt so anything. I want the songs I paid for.

    Yes its been cleaned out, i have tried many different things to try an fix it but still nothing. i just can't understand how it can be working perfect 1 minute then not working the next minute.  seems to be a common problem with no real solution.

  • My iPhone 5 is not catching up my website, although having a big screen... What does it need to get the pages in auto mobile queries converting?

    my iPhone 5 is not catching up my website, although having a big screen... What does it need to get the pages in auto mobile queries converting?

    You need to code your web site to recognize the mobile browser and send a page that's actually usable when it does.

  • I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

    That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
    You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
    If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

  • I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had.  I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

    I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had.  I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

    It has always been very basic to always maintain a backup copy of your computer.
    Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod/iphone/ipad:  File>Transfer Purchases

  • What do I need to get the 6.7 update [to read the CR2 canon raw files] installed in Photoshop elements 10 [new computer with Windows 8]?

    I downloaded the zip file for the 6.7 update and unzipped it. I double clicked on the .exe file and it would not install. What do I need to get the update installed?

    Is this the 6.7 camera raw updater you tried?
    It's specifically for pse 10 on windows.
    Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
    What camera do you have?

  • When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

    When I convert a PDF to a Word doc, it "converts" as a picture and I cannot edit the document. What can I do to get the PDF to convert properly?

    Hi conversionnewbie,
    Are you able to select the text in Word by triple-clicking inside the text box? (Sometimes text selections can be tricky in converted files.) If you can't select the text, then I'm guessing that the PDF was created from a scanned file (so the text becomes images). Make sure that OCR is enabled when you convert the file to Word. OCR is enabled by default in the ExportPDF web interface, but can be disabled in Adobe Reader. If you're converting to Word from within Adobe Reader, make sure that OCR is enabled and that the correct language is selected:
    Please let us know that works for you!
    Best,
    Sara

Maybe you are looking for

  • Sending Mail to Internet Address Maintained in Infotype 105

    Hi All, I have a requirement wherein I have to send mail to the Internet Address of the employee which is maintained in Infotype 0105. Now I have gone through the SDN where in they have said that using select or FM get the Employee details and pass i

  • Downgrade iPhone iOS

    I use Dad's old MacMini OS 10.4.11 + iTunes 9 for my music etc I have an iPhone 3GS which worked just fine & syncs with the mac. Two days ago I needed to print some photos so plugged into Dad's PC (XP + iTunes 10) to print. Great news! Upgrade availa

  • Restrict a field (0 to 100) in SM30

    Hi,        I have created a Z table and in that there is field with domain of type DEC (Length 5, decimals 2, output length 6). In this domain on value range tab, under intevals I have given lower limit as 0 and upper limit as 100.       I have also

  • GS70 laptop power setting issue (it does not save my setting even with admin)

    laptop is decent, but the power setting does not save when i (1) shutdown (2) go through fn + F5;power modes on msi gs70  I want to change simple power options such as: -do nothing when close lid -other etc in power options will revert back to origin

  • Generate Unicode text file

    Hi All, I am trying to create a unicode text file using OPEN DATASET which is to be fed to MDM for further process. I tried using the follow statement but no use, OPEN DATASET p_afile FOR OUTPUT IN LEGACY TEXT MODE CODE PAGE '1100' IGNORING CONVERSIO