What need to be done for CDC when transfer the application server to new?

we have a BO DI server in window, an application server JDE, and data mart in sql server for universe data. We set up the triggle based CDC in DI. Therefore, we extract change data from application database (oracle) to CDC table, then tranform the data to the sql server database to feed the universe data. We are moving our application server (JDE) to a new server, new hardware...etc. We need to certify the CDC in the new server database, but not sure what need to be done in the CDC part. The data has to do a full refresh then we need to turn on our CDC to the new server, where we change the configeration? Does anyone has such experience before?

sb92075 wrote:
Sunil F. wrote:
you need to change the location in /etc/oratab as well./etc/oratab file is NOT required to start or run Oracle RDBMSbut if you don't change it, then when the server is restarted you are reasonably likely to have the database running with the wrong binaries.
I'd also add that you should review and update any ORACLE_HOMEs located in your network configuration (wherever you host service resolution for oracle services). Specifically listener.ora and tnsnames.ora on the server, plus client connectivity as well.
Niall Litchfield
Oracle DBA
http://www.orawin.info/

Similar Messages

What need to be done to database when db starts up point to new ORACLE_HOM

Hi,
I have a database that will need to change to another ORACLE_HOME on the same box. The ORACLE_HOME release will be the same, 10.2.0.4 on AIX. What do I need to do to the database beside shutting it down, starting up after setting the .profile to point to the new ORACLE_HOME? Thank you.

sb92075 wrote:
Sunil F. wrote:
you need to change the location in /etc/oratab as well./etc/oratab file is NOT required to start or run Oracle RDBMSbut if you don't change it, then when the server is restarted you are reasonably likely to have the database running with the wrong binaries.
I'd also add that you should review and update any ORACLE_HOMEs located in your network configuration (wherever you host service resolution for oracle services). Specifically listener.ora and tnsnames.ora on the server, plus client connectivity as well.
Niall Litchfield
Oracle DBA
http://www.orawin.info/

Created a PDF and added sticky notes, saved and emailed for review, recipient could not see or read the sticky notes. What needs to be done for my sticky notes to be seen and read when emailed. Thanks

I scanned a map and printed to create a PDF document, at that point I added sticky notes of different locations with notes of descriptions, saved and email to client for review.
Client received email but when he opened the attachment, all he could see was the map and none of my sticky notes.
What needs to be done so the recipient can see my sticky notes and read the descriptions for each sticky note?

Hey roy,
Could you please tell me what is your Acrobat version?
Please ensure that recipient downloads the PDF and uses either Adobe Acrobat or Reader to open the sticky notes.
Regards,
Anubha

What needs to be done to rebuild a current Sharepoint 2010 Server farm to work as a Sharepoint 2013 Server farm?

Hello Community
    Currently I have a Sharepoint 2010 Server farm.
    One server contains the database and DNS server
because it is the the domain controller.
    The other server Contains the Sharepoint 2010 Server software
and is the the application server where applications such as Metadata,
UPs, etc, reside (including web applications with sites built with the UI).
    Now I am going to change to Sharepoint 2013 Server because currently
there is no newer version of Sharepoint available.
    I am ready to rebuild the current Sharepoint 2010 farm configuration into
a Sharepoint 2013 Server farm from scratch.
    The question is what do needs to be added and\or changed to make the current
Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
    Thank you
    Shabeaut

There is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
to SharePoint 2013 for more information about the process.
If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
12 GB memory
64-bit, 4 processor cores
80 GB for system drive
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

F4 help for file path in the Application server

Hi All,
i want to provide the F4 help so as to enable us to give the file path in the application server (AL11). I'm in version 4.0
Regards
Shekhar

Hi
Copy paste the following code and see the result
Here you can see 2 types of open dialogs
1. Directory View
2. File View
Use any one as per your requirement.
DATA : l_filetable TYPE filetable,
       l_rc TYPE i.
DATA: l_folder TYPE string,
      l_file TYPE string.
PARAMETERS: p_folder(100) TYPE c,
            p_file(100) TYPE c.
*Provide a Dialogue box for getting a folder path
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_folder.
CALL METHOD cl_gui_frontend_services=>directory_browse
    EXPORTING
      window_title    = 'Select Folder Path'
      initial_folder = 'D:\'
    CHANGING
      selected_folder = l_folder.
p_folder = l_folder.
*Provide a Dialogue box for getting a file path
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title      = 'Select a Text File'
      initial_directory = l_folder
    CHANGING
      file_table        = l_filetable
      rc                = l_rc.
Reward points generously
Regards
Akshay Chonkar
READ TABLE l_filetable INTO p_file INDEX 1.
CHECK sy-subrc <> 0.

Using HP8500 wireless with other Macs but iPad2 does not see the printer on the network .. what needs to be done for the iPad to see the HP printer?

iPad2 doesn't see HP8500 wireless printer .. other Macs (Air & Mini) have no trouble printing ..

Same with mine. MacBook and pc both print fine but not my ipad2.

I am unable to open I cloud with my apple I'd every time I try message comes that " max no of account have been activated on your I pad" what needs to be done,how can I delete the accounts which I had opened as I don't remember the I'd and passwords

Can any one help me on this

It seems that you've been trying to create Apple IDs (even if you thought you were just trying to use one to make an iCloud account) and you have reached the max allowed number of IDs you can create on the device (which is 4 or 5 as I recall). The only way to create yet another one is to use a different device or a computer. No other way around this.
If on the other hand you want to USE an existing one, go to Settings>iCloud and enter that ID.

Error when starting the Application Server

Hi..
I have a few problem..
I want to start the App/Portal Server.
/oracle/infs/bin
1)lsnrctl start - ok
2)sqlplus start -ok
3)oidmon start -ok
4)oidctl server=oidldapd instance=1 configset=1 start -ok
/oracle/infs/dcm/bin
5)dcmctl start -cl -ok
6)dcmctl start -ct ohs -ok
7)dcmctl start -ct oc4j -ok
but when i do step no 8)
dcmctl getstate -v
i got these error..
"See base exception for details.
Base Exception:
oracle.ias.repository.schema.SchemaException:Unable to retrieve the requested at
tributes:javax.naming.NoPermissionException: [LDAP: error code 50 - Insufficient
Access Rights]; remaining name 'orclReferenceName=iasdb.portal.upm.edu.my,cn=IA
S Infrastructure Databases, cn=IAS, cn=Products, cn=OracleContext'
See base exception for details.
$"
I tried to start the EM first in /oracle/infs/bin
emctl start
but, the EM didn't have any data (no cluster info, no infs info,no apps info, it is blank!!)
Plz Help me...thanks..

user536800,
A search of this forum's archives for the word "xerces" returns 75 hits.
Perhaps one (or more) of those postings will help you?
The way to integrate Xerces into OC4J differs, depending on which OC4J version you are using.
Forgive me, but I couldn't find details of the version you are using in your post.
I also believe the way to do it would also depend on the version of Xerces you are using, the JDK version you are using and maybe even on the platform you are on.
Again, forgive me, but I could find none of those details in your post.
Good Luck,
Avi.

What need to be done to use the cashflow report(T-code:S_ALR_87012271)?

Hi All,
Does anyone know what need to be done in order to use the cashflow report(T-code:S_ALR_87012271)?
Any specific configuration, modules and functions need to be turned on to use it?
Thanks,
CW

Hi,
You have to configure CFS in financial statement version(OB58).
Please refer some of the existing settings for CFS and you will have some idea
Regards
A

API for creating a directory in the application server

Hello,
Does anyone knows a way to create a directory in the application server? Something similar to
CL_GUI_FRONTEND_SERVICES but for managing files in the application server?
Thanks in advance
Diz IsMi

Actually, CL_GUI_FRONTEND_SERVICES=>Directory_Create works really good for me.
REPORT ZRICH_0001 .
data: path type string.
data: rc type sy-subrc.
path = '\172.52.72.651qfilesvr400S109XXXXusrsapTSTSYStest'.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_CREATE
EXPORTING
    DIRECTORY                = path
CHANGING
    RC                       = rc
EXCEPTIONS
    DIRECTORY_CREATE_FAILED = 1
    CNTL_ERROR               = 2
    ERROR_NO_GUI             = 3
    PATH_NOT_FOUND           = 4
    DIRECTORY_ACCESS_DENIED = 5
    DIRECTORY_ALREADY_EXISTS = 6
    UNKNOWN_ERROR            = 7
    others                   = 8
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Rich Heilman

I have just installed 10.7 Lion and get the following message when trying to open a Microsoft Office for Mac 2004 product "You can't open the application Microsoft Entourage because PowerPC applications are no longer supported." What needs to be done ?

What needs to be done to regain my Microsoft Office for Mac suite that I lost when I installed Mac os 10.7.3 Lion upgrade?

boyfromoz wrote:
Shootist007 wrote:
Or you could just wipe out Lion and restalled Snow Leopard. Then when you are in the market for a new computer, desktop of notebook, buy something other then Apple.
why would you say things like that here? if you are a windows one then stay there. but you are not polite or helpful and if can't use Apple i wonder why you would come here to tell all about your sad story. I don't understand that it has nothing to do with question asked.
I own, or should I say have owned, several Apple products. Including a new MBP.
I also use Windows.
I will say anything I like in an effort to help people overcome problems they are having with Mac's and computers in general.
Being a Apple Fanboy is not required for membership on this forum or trying to help other Mac users.
And just how is suggesting to remove Lion and to go back to Snow Leopard not helping the OP in his quest to make his already owned and paid for MS Office software work? If it is isn't broken stop trying to fix it. Snow Leopard is a fine OS. Lion is still in Beta, only Apple hasn't told anyone. And yes I run Lion on my new MBP but I also have a partition with Snow Leopard on it.
Thank you and have a great day.

Hi, We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

Hi,
We have an application built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
Is this default behaviour which cannot be changed or can it be configured to ask user preference?
When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
Please suggest what needs to be done.
Regards,
Pramod

Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
Regards.

Itunes stops working when accessing the store what needs to be done to get it working again?

itune stops working when accessing the store. What needs to be done to get it working again?

Hey Baitmaster61!
Here is an article that will help you troubleshoot this issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If you are still experiencing issues with reaching the iTunes Store, you may also need to reference this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

TS3274 Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

- First try clciking the Home button one and try again.
- Next reset the iPod. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then restore from backup
- Restore to factory defaults/new iPod

Ipad was disabled...it says connect to itunes. When connected to itunes it sayd enter the password on the ipad...what needs to be done?

My ipad was disabled. It says on it to connect to itunes...when connected to itunes,it says I need to unlock it and enter the password. There`s no slide bar to allow this action. What needs to be done? Please help

try restarting your computer and reluanching itunes. also here are the steps on restoring your iPad.
http://support.apple.com/kb/HT1808

What need to be done for CDC when transfer the application server to new?

Similar Messages

Maybe you are looking for