What needed for 7813R pwm i2c SPI

Hello,
we want to use the PXI-7813R 3M Gate Digital RIO (160 DIO) card to generate PWM signals, test I2C communication and use it for SPI testing/communication.
Perhaps also some conventional I/O testing...
They've told us that on the site www.ni.com/ipnet we can find IP to do this.
My question: do we need additional software tooling to use/program this FPGA? Or is just downloading some libraries via VIPM and "using" some vi's sufficient ?
thanks.

You will need to have LabVIEW, LabVIEW FPGA and the Xilinx tools which will be installed with the FPGA module.
You can find IP where you mentioned for SPI and I2C the generation of PWM you can find in LabVIEW Example Finder under Help in the toolbar. The general I/O testing will need more info to describe where to find info how to do it.
Best Regards
Jonas Mäki
Applications Engineering
National Instruments

Similar Messages

  • What needed for MBP 13" to LCD TV?

    OK, I'm a bit confused as to what to get to view video (and audio of course) from my 13" MBP to my Sony Bravia LCD TV. I could use an HDMI port on my Sony or perhaps the 15 pin VGA port too.
    Is there just one cable that is MiniDisplay out to HDMI in? I've tried finding something like this but it appears I need to connect 2 cables to accomplish this?
    Any suggestions most helpful. Thanks.

    This comes recommended by another user (eww) and fits your bill:
    http://kanexlive.com/products/item.aspx?id=3495
    Then use a regular HDMI cable into the TV

  • N80 - whats needed for setting up wlan

    HI,
    trying to save wap minutes, what hardware is needed to set up a WLAN in my home ?? to enable me to surf on my phone via wlan??
    Thanks in advance
    Gary

    26-Nov-2006
    06:35 PM
    petrib wrote:
    If your PC already has WLAN, and your PC also has a fixed/cable connection to the Internet, then it might be possible to make your PC a router (Windows' "Connection Sharing" feature + the WLAN in ad-hoc mode).
    I've never tried as I have WLAN access points/routers that I use, instead.
    Yes it is possible, have played about with mine and successfully used it. You will need to bridge the connections between your internet connection and your wifi connection on your laptop.
    Nowhere near as easy as using a router though.
    I have full End User experience of:
    5510, 3210, 3310, 3510, 3510i, N80, N80IE, 7610, 2610, 1208 and current E90.

  • Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • What cable for macbook pro needed to connect with LCD projector

    I ordered a Mini DVI to VGA adapter, but it doesn't fit into my laptop. What connection do I need for a connection

    if you do not have a Mini DVI, that leaves only about 80 models of MacBooks.
    Which one do you own?

  • What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

    What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

    Hi,
    just found your post...
    To install your HP1010 on Win7do the following:
    Start
    Devices & Printers
    Add a printer
    Adda local printer
    Use an existing port: DOT4_001 (Generic IEEE...)
    Next
    Pick HP from manufacturer
    Select HP LaserJet 3055 PCL5
    Next
    Name the printer something to your liking
    Finish (or so, just follow the prompts)
    Here you are!
    Works every time for me, never had a problem from any application.
    I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message.  Be with me...
    Matt

  • What technical components are needed for integration of SAP BI and BO?

    Hello,
    What technical components are needed for integration of SAP BI and BO?

    Hi,
    you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
    In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
    Please take again a look at the following link for more detailed information (from Ingo) on this:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
    Regards,
    Stratos

  • What type of hard drive enclosure do I need for my old hard drive?

    What type of hard drive enclosure do I need for the hard drive from my old macbook pro?  The graphics card doesn't work on the old laptop and there were some files that were not on my last backup that I transferred to the new macbook pro.

    Check eBay. Any 2.5" USB SATA HDD enclosure.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • What adapter do I need for my ipod Nano 7th Generation to connect to a Sony home docking station (30 pin). I purchased the one recommended (Lightning to 30 pin adapter), but it says 'this accessory is not supported by this device)?

    Could someone please tell me the correct lead I need for an Applie Ipod 7th Generation 16GB for a Sony docking station. I bought a Lightning to 30 pin adaptor that fits the dock but not the ipod (this was recommended to me by someone from the Apple shop believe it or not). I need one that will fit the ipod and then slot into the 30 pin dock. The dock pulls out and my old ipod (5th Generation) just slotted straight in, but this slot obviously doesn't fit. It would really help if someone can recommend what I need to use or even if there is one that just slots in or whether I need some sort of cable and can't use the docking station. I've had a lock at the Apple store but just keep getting confused about what does what and can't seem to see anything unless I need an additional cable to slot into the 30 pin adapter I already have?
    HELP - CONFUSED.COM!

    If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
    This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
    Is this what you bought?
    You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

  • What is the need for setting property data inside the JMSMesage

    Hi
    Could anybody please let me know
    *What is the need for setting property data inside the JMSMesage??
    For example i have a seen a similar example as shown ??
    I have seen a
    Message.setStringProperty("Sport","Basketball");
    and also please tell me how can the MDB recievies this property data ??
    Thanks in advance .

    raviprivate wrote:
    Could anybody please let me know
    *What is the need for setting property data inside the JMSMesage??
    For example i have a seen a similar example as shown ??
    I have seen a
    Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
    >
    and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

  • I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

    I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

    Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

  • What kind of charger do I need for a 17-inch Macbook Pro?

    I have a 4 year old Macbook Pro and the charger just failed on me. I'm looking on the wensite and I see Magsafe 1 and 2 and converters. What do I need for my laptop?

    This;
    http://store.apple.com/us/product/MC556LL/B/apple-85w-magsafe-power-adapter-for- 15-and-17-inch-macbook-pro?
    Ciao.

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

    All you need is an Ethernet cable.
    Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

  • What is the type of cable do i need for a macbook white to connect to a hdmi cable?

    what is the type of cable do i need for a macbook white to connect to a hdmi cable? This is quite a problem since macbook white is not in production anymore.

    First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.
    The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

Maybe you are looking for