What needs to be changed to run Weblogic as a service and not as an application?

The server is running Windows 2000. Weblogic was installed on the server as an
application and not as a service. We need Weblogic to run as a service, could
someone please provide me with information on the easiest way of doing this, as
we can not re-install the Weblogic at this point. Any assistance would be greatly
appreciated.

hi.
Run the installNtService.cmd script.
Regards,
Michael
Mariet wrote:
The server is running Windows 2000. Weblogic was installed on the server as an
application and not as a service. We need Weblogic to run as a service, could
someone please provide me with information on the easiest way of doing this, as
we can not re-install the Weblogic at this point. Any assistance would be greatly
appreciated.--
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

  • Running weblogic as a service on NT

    We are currently trying to run weblogic as a service on Windows NT. Yet the service
    has hung once and run out of memory once. The hardware and software specification
    is listed below.
    Hardware
    System     Intel
    CPU:     Dual 866 MHz or faster
    Memory:     500 MB
    Hard Drives:     2 x 10 GB RAID-1 System Drive
    Network:     Static IP allocation and TCP/IP network protocolTwo Fast Ethernet 10/100
    Software
    Windows NT 4.0 Option Pack Typical InstallBEA WebLogic Version 5.1 with Service Pack
    8 and JDBC drivers for MSSQL ServerJava 2 SDK Version 1.3.1 RC 2
    The WebLogic server has been using the srvany.exe and instsrv.ex utilities (part
    of the NT Resource Kit) . Note that it is necessary to use the srvany utility rather
    than the custom BEA service utilities in order to allow the passing of command line
    parameters to the JVM. An important JVM parameter is –Xrs which prevents JDK1.3
    applications which run as a service on NT from shutting-down when the user who started
    the service logs out. This problem does not occur on Win2K systems.
    1.     Set-up a ‘weblogic’ user account that is a member of the Users group
    and has explicitly assigned 'log on as a service' right.
    2.     At a command prompt install srvany with the command
    INSTSRV WGO_server c:\winnt\system32\srvany.exe
    3.     Use the services applet (in the Control Panel) to ensure that the service will
    run using the weblogic account and that the service is set for automatic startup
    4.     Use the Registry Editor REGEDT32.exe to configure srvany as follows:
    a.     Highlight HKEY_LOCAL_MACHINE\SYSTEM\CurrentContrelSet\Services\WGO_server and
    select Add Key from the edit menu.
    b.     The key to be added should have the name “Parameters” – the
    class field may be left empty.
    c.     Highlight the newly created Parameters key and select the Add Value option from
    the edit menu. The name of the value to be added is “Application” and
    the type of value is REG_SZ. When you o.k. these options, you will be asked to provide
    the string value representing the application to be triggered by servany –
    type in the path to the startweblogic.cmd file:
    c:\weblogic\WGO_server\startweblogic.cmd
    d.     With the Parameters key still highlighted, select the Add Value option from the
    edit Menu. The name of the value is “AppDirectory” and the type is REG_SZ.
    Set the directory in which the application runs by typing in the path
    c:\weblogic\WGO_server
    5.     To start the weblogic server, return to the Service applet in the control panel
    and start the service named WGO_server. To shutdown the service, first run the script
    c:\weblogic\WGO_server\shutdown to shutdown weblogic cleanly, wait a few moments
    and then stop the WGO_server service via the Service applet.
    If anyone has experienced a similar problem please let me know
    Thanks
    Jo

    I would look at all the other startup script you have on your machine already.
    They are usually placed in /etc/init.d and these files are often linking into /etc/rc3.d
    I suggest you google on how to setup a service for your flavour of linux as they are not all the same.

  • TS3276 I need to send a photo via email as an attachment and not it shown in the body of the email?

    I need to send a photo via email as an attachment and NOT have it shown in the body of the email?  Please help.

    To make attachments not appear in the body of the e-mail as a default, try using the Applications/Utilities/Terminal command below. I suggest copy and paste.
    defaults write com.apple.mail DisableInlineAttachmentViewing -bool YES

  • When I drag ANY JPEG into a new folder of ANY kind, I get an alias, not an original. And, when I drag aliases onto a  blank disk to burn it, I get burned aliases, NO originals. That's what I'm asking. How do you drag a JPEG and NOT get an alias?

    When I drag ANY JPEG into a new folder of ANY kind, I get an alias, not an original. And, when I drag aliases onto a  blank disk to burn it, I get burned aliases, NO originals. That's what I'm asking. How do you drag a JPEG and NOT get an alias?

    Finder Help describes how to move, copy etc.
    As well, Apple - Support - Discussions - Moving or Copying Files and ...

  • How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    How do you configure the iMac so separate users can access each other's files, especially iPhoto and iTunes? I need to be able to transfer media between two users and not just gain limited access using 'share'.

    See Terence Devlin's thorough explanation here.

  • My iphone is frozen on a screen that is displaying a plug and an itunes icon. I need my phone to work now. Im on call and not at phone. Please help asap

    My iphone is frozen on a screen that is displaying a plug and an itunes icon. I need my phone to work now. Im on call and not at phone. Please help asap

    you need to connect your phone to iTunes.  No way around it.

  • My iPhoto library won't open because "it first needs to be prepared," but running the iPhoto Library Upgrader does not change anything.  What gives?

    I'll try to be as detailed as I can:
    I have a mid-2010 iMac.  I backed-up and then wiped my Mountain Lion hard drive so that I could have a clean install of Mavericks.  I am now in the process of importing my backed-up files, like iTunes and documents, from my external back-up to my new Mavericks machine.  Everything in this process has worked so far.  I moved the iPhoto library over from the external back-up to the proper location (Users->Pictures->iPhoto Library).  Two hours later when the transfer was complete, rather than having a normol iPhoto Library icon (stack of pictures with a photo of a flower), the library appeared as a folder with a half done progress bar and an "x" close button in the corner. 
    This library would not open so I deleted it and started the whole thing over.  Two hours later, same thing.  I then restarted my machine and got a regularl looking iPhoto Library icon, but now when I try to open it I get a prompt that says "To open your library with this version of iPhoto, it first nees to be prepared: to prepare the library, use the iPhoto Library Upgrader avaliable from Apple."  I downloaded the iPhoto Library Upgrader from Apple, ran it, and it says that the library has been updated and can now be used.  But when I try to open iPhoto, I hit the same problem, iPhoto doesn't open and I instead get a prompt saying that the library needs to be prepared. 
    One more thing, when I run the iPhoto Library Upgrader, there is a un-progressing progress bar (a sideways barber shop poll) that says the program is building thumbnails, but then Upgrader gives me a prompt that the library has been upgraded (even though the progress bar is still cranking along).  PLEASE HELP.

    What version of iPhoto were you running prior to Mavericks?  First boot into Revovery volume (boot with the Command  + R keys held down) and repair the disk and disk permissions.  Then reboot back into Mavericks.
    Two hours later when the transfer was complete, rather than having a normol iPhoto Library icon (stack of pictures with a photo of a flower), the library appeared as a folder with a half done progress bar and an "x" close button in the corner.
    There was a problem with copying the older iPhoto library from the backup.  Delete the library and drag it once again from the backup drive to the Pictures folder.  Run the upgrader again. Is this what you see when your first launch the upgrader?
    OT

  • What needs to be changed if we change hostname in linux

    Dear all,
    I have a question and will appreciate for appropriate answer(s).
    My machine name was lxcms120.cern.ch and Oracle 10g DB was running fine on it (listener, DB, Enterprise Manager). It is not a production system rather a test system.
    Now, i changed its name to docms11.cern.ch
    I change hostname in listener.ora & tnsnames.ora and listener started successfully.
    I started db from sqlplus and it started without any complaints.
    Now, when i tried to start Enterprise Manager (emctl start dbconsole), it didn't and return this error.
    OC4J Configuration issue. /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_docms11.cern.ch_oralxcms120 not found.
    Now, i know that when the machine name was initially lxcms120, it was /localscratch/orahome/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_lxcms120.cern.ch_oralxcms120
    and if i go to that directory, i could see OC4J_DBConsole_lxcms120.cern.ch_oralxcms120 but of course there is no OC4J_DBConsole_docms11.cern.ch_oralxcms120
    My dbname instance is oralxcms120 and has nothing to do with hostname.
    So, what is the solution to the problem. Moreover, are there any steps to do while changing hostname of the oracle database like in my case which i can follow to make all required changes.
    Best regards,
    Anjum

    You will need to do a little more than just directory rename,
    From Oracle document,When the database host name (including the domain name) or the IP address changes, deconfigure and then reconfigure the Database Console with the repository create command. Run the following command:
    emca -deconfig dbcontrol db -repos drop
    emca -config dbcontrol db -repos create
    or
    emca -deconfig dbcontrol db
    emca -config dbcontrol db -repos recreate
    http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/structure.htm#CACBBFGI

  • Running Weblogic 8.1 SP3 and IPlanet 6.0 on same machine

    I have requirement to run Weblogic Platform SP3 and IPlanet 6.0 servers on same Solaris machine
    for a client of ours.
    Please let me if we can do this. What kind of issues we may run into.
    Thanks,
    Sanjay

    Hi
    Of course, you can install both at the same machine.
    Only remember the memory required ... and the real memory available ... this for don't have swap problems.
    Remember too if you are planning to create WLS clusters ... BEA recommends 1 cluster per CPU ... and reserve 1 CPU for the iPlanet web Server. Even, you can install all clusters and web server as your machine support ( under load, try to mantain the CPU usage under 70-80%).
    Jin

  • What is the best way to run internet explorer on Mac and IPad and is it safe to do so??

    I need to run internet explorer to access new billing software,  what is the best way to do so and is it safe to run this on macbook and ipad if possible??

    You can't run IE on an iPad and the only way to use it on a Mac, since it's been discontinued for years for the Mac OS, is to install Windows either via Boot Camp or via running Windows as a virtual machine using something such as Parallels Desktop (my personal preference).
    Clinton

  • Need Apache to only bind port 80 to one IP and not all

    So as the subject says, I need to have apache only bind port 80 on one IP address. I have a Wowza streaming server that also wants port 80 but for a different IP, but I can't get apache from taking all IP's. Any help would be great. Thanks!
    -Brian

    I have never seen this not work, but I'll take your word for it.
    If Server Admin isn't doing it then you'll have to look at your config files manually and change them if needed.
    If you're running Apache 2 then you need to look at /etc/apache2/httpd.conf and the files in /etc/apache2/sites
    For each file you're looking for you want to find either a <VirtualHost> or a <Listen> directive of *:80 and change it to to specific IP address you want it to use.

  • Change the Apple ID for a game and not lose the progress made?

    Short version of my question: can I change the apple id associated with a game to another one and not lose the progress made in the game thus far?
    Long version: when there were only a few iGadgets in the house, all games and music were downloaded through Alpha's apple id and the credit card tied to that account. Now, we two folks have multiple iGadgets between the both of us and Beta has her own apple ID. Because we only used one apple id  for so long, Beta has some games installed through Alpha's account and her own Beta account. Beta would now like to change the account the game PocketTimeSuck is associated with from Alpha's account to Beta's account without losing any of the progress made in this game which she has been playing for over a year.
    Is there any way of re-installing PocketTimeSuck onto Beta's device under Beta's apple ID and maintain the progress in the game she has made after installing it under Alpha's apple id? Alpha would like to start playing PocketTimeSuck but cannot install it under her own apple id because it comes with all of Beta's progress.
    (Also, if this is not the right forum, please let me know where I should post this question. Don't flame me, just tell me.)

    I'm getting confused by the Greek alphabet here so I will explain it this way and hope I understand what you are asking.
    Beta has been playing a game that she downloaded using Alpha's ID but now Beta would like to transfer the game and all of its progress to her own ID. That is not possible to do. The game was bought with Alpha's ID and is now associated with that ID and that progress is part of Alpha's backup.
    Alpha now wants to play the game under her own ID but the game is associated with her ID already. If she wanted to, she could just pick up where beta left off and leave Beta out in the cold. Somehow I don't think that is a good solution for either Alpha or Beta.
    Alpha should probably create a new Game Center account and start all over again with her own Game Center account. Beta will obviously have to do the same thing if she wants to play this game using her own Apple ID on her own iGadget.
    So if I do understand correctly, Alpha and Beta will both have to start over again. Howver, I could be confused because this is all "Greek to me".

  • How do I change a font for a specific widget and not my whole site?

    I recently added an affiliate link to my site, and the widget they provided is referencing my CSS text style sheet.
    type="text/javascript"
    The problem is that the text on my site is white, and the search box in the affiliate box is white, so you don't see anything in the text box unless you highlight the text. I changed the font color on the affiliate widget on their site, but it still comes up white.
    I did see a discussion where they suggested changing the font family, which may be a start. I'm wondering though how can I change the style for just this one reference and not my whole site without changing the code I was provided from the affiliate. Perhaps I need to add something to my style.css?
    Thanks!

    You might try inline CSS styles in your widget HTML code but without seeing your page, it's impossible to be more specific.
    Nancy O.

  • Running WL as NT Service is not Creating Connection  Pools?

    We have something very strange happening here. We recently installed Weblogic 6.1 sp 4 on an WinNT 2000 box and installed our application. We are connecting to an Oracle 8.1.7 database using the Oracle 8.1.7 client drivers. We configured our connection pool via the Web Console. We also installed our application to run as a NT Service using "beasvc.exe" utility.
    When we run our application after starting Weblogic from the commandline, our application runs fine. It creates the Oracle connection pool and everything is great.
    However when we run our application by starting it under the NT Services window, our application fails to start the connection pool. Looking at all the logs, I don't see and errors or exceptions being thrown. I did notice that the connection pool was not created. But again, no errors were thrown.
    Has anyone seen this behavior? To make things more confusing for me, this whole solution is working fine on another WinNT 2000 box with the only difference beint that we are using Weblogic 6.1 sp2. Anyone have any ideas??? Also, running the NT Service version of Weblogic in debug mode also worked!

    It takes the Oracle service quite a bit of time to start up. Make sure that you
    set up the DependsOnService correctly in your registry so that Oracle comes up
    fully before launching WL.
    Paul
    Clyde <[email protected]> wrote:
    We have something very strange happening here. We recently installed
    Weblogic 6.1 sp 4 on an WinNT 2000 box and installed our application.
    We are connecting to an Oracle 8.1.7 database using the Oracle 8.1.7
    client drivers. We configured our connection pool via the Web Console.
    We also installed our application to run as a NT Service using "beasvc.exe"
    utility.
    When we run our application after starting Weblogic from the commandline,
    our application runs fine. It creates the Oracle connection pool and
    everything is great.
    However when we run our application by starting it under the NT Services
    window, our application fails to start the connection pool. Looking
    at all the logs, I don't see and errors or exceptions being thrown.
    I did notice that the connection pool was not created. But again,
    no errors were thrown.
    Has anyone seen this behavior? To make things more confusing for me,
    this whole solution is working fine on another WinNT 2000 box with the
    only difference beint that we are using Weblogic 6.1 sp2. Anyone have
    any ideas??? Also, running the NT Service version of Weblogic in debug
    mode also worked!

  • Changing the Condition value in Quatation only and not in Order

    Hi Gurus,
    We have a Requirement from Client in which the Client should be Able to change the condition Value PR00 in the Quotation and not in Sales order......can someone please let me know how's that possible?
    Because if we try to make Changes in Condition Type in V/06 it will also allow changes in Sales Order....

    Hi
    You can use user-exit USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
    IF VBAK-AUART = (Your quotation type)
    LOOP AT XKOMV.
    IF XKOMV-KSCHL = 'PR00'.
    SELECT * FROM T685A INTO TABLE I_T685A WHERE KSCHL = 'PR00'.
    READ TABLE I_T685A WITH KEY KSCHL = XKOMV-KSCHL.
    I_T685A-KMANU = 'C'.
    MODIFY I_T685A INDEX SY-TABIX.
    MODIFY T685A FROM TABLE I_T685A.
    REFRESH I_T685A.
    ENDIF.
    ENDLOOP.
    like this discuss with your abapper and build the logic
    regards
    Prashanth

Maybe you are looking for