What needs to be confiugred in the dhcpd.conf file to support POAP?

Looking to use the same script poap_script.py, to auto provision my nexus 9k switches but I did not see what the dhcpd.conf should look like. what dhcp options do I need to set to get this feature working?

Similar Messages

When I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

when I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

In the Users & Groups pane of System Preferences.
(66105)

[solved] No dhcpd : No /etc/dhcpd.conf file

I've managed to get the KDE desktop running, but ever since starting KDE, I haven't been able to connect to anything online. When I tried to check and edit the /etc/dhcpd.conf file, that file doesn't exist. Looked at the Beginner's Guide but didn't see where I skipped whatever I should have done to make the file. Install worked great, so dhcp worked for that.
What do I do to get dhcp to work? Checked /etc/rc.conf and eth0="dhcp" is uncommented.
Last edited by pottzie (2010-05-14 05:11:38)

What do you mean by this?
wrote:Right now I have three, "network netfs crond," "network crond alsa," "and dbus hal networkmanager alsa crond kdm." Hal's seemed kinda "maybe-ish," as when I entered what I thought was suggested, sometimes nothing happened, sometimes some things did
If those are what you are placing in the daemon section of your /etc/rc.conf then that's probably your problem. Don't use networkmanager daemon unless you have 'networkmanager' and 'network-manager-applet' installed.
Try this
(hal syslog-ng network netfs crond alsa)
Look here for network configuration
http://wiki.archlinux.org/index.php/Beg … NG_Section
And here to start KDM using /etc/inittab instead of /etc/rc.conf
http://wiki.archlinux.org/index.php/Dis … mmended.29
Have Fun!

Problems modifying the httpd.conf file

We are running Flash Media Server 4.5 on Windows Server 2008. We want to move the vod folder which by default is in webroot. We create a new vod folder and then modify the httpd.conf file so that it points to the new vod location. We then stop and restart the Flash Media Server service. However, the server acts like the old paths are cached somewhere in the system. Videos in the new vod folder do not work. Videos in the old vod folder open even though the httpd.conf file was modified.
We made sure that the client browsers on which we tested this had their cache cleared.
Anyone have any ideas what might be going on here?

Thanks for your reply! I tried restarting the FMSHttpd service separately. Still encountering this issue, however.
Here's what we are doing:
1. We create a new vod folder.
2. We modify the httpd.conf file in Flash Media folder -> Apache2.2 -> conf so that it points to the new vod location. For example, we make a modification to HttpStreamingContentPath like the following:
<IfModule jithttp_module>
<Location /hds-vod>
    HttpStreamingJITPEnabled true
    HttpStreamingContentPath "..\..\[new vod folder]"
    HttpStreamingJITConfAllowed true
    JitFmsDirPath ".."
    Options -Indexes FollowSymLinks
# Uncomment the following directives to enable encryption
# for this location.
#   EncryptionScope server
#   ProtectionScheme phds
</Location>
</IfModule>
3. We restart the FMSHttpd service.
After doing this, we find that the path to the old vod folder is still working. Videos in the new vod folder don't open as expected.
Are there any other steps that we should be taking? Many thanks for any help.

Securing the JASS CONF file

Hi,
I have put the JASS conf file as a resource in a signed JAR file. I did this so someone cannot alter this file. I also set the location of the file in the code right before I use it by setting the environment variable java.security.auth.login.config. Can anyone find a hole in this technique? The other option is to set the location as a URL on the web server and set the location of the file by using the environment variable java.security.auth.login.config.
Thanks,
- Bob

Thanks for your reply. Do you have any specifics on
how the JAAS conf file in a signed jar could be
hacked.The security issues of client-side JAAS have been brought up several times in this forum. Securing the config file as you do it eliminates the easiest way of replacing a login module on the client, but I remember another forum message where the author replaced the related login module in rt.jar by his own, malicious implementation. You cannot prevent that with your approach.
Another other issue (not security-related) with the client-side JAAS config, delivered in a signed JAR, is that you are giving up one key advantage of JAAS, the ease of exchanging the authentication mechanism.
Accessing it via a (secure) web connection from the server is a way to address that, though, as you suggest.

Error after Installing and updating the DADS.CONF file

I was able to get all the software installed for AE 3.0.1 and open the HTTP Server prior to updating the DADS.CONF File.
So far I have not been able any errors in the Apache/Apache/logs directory that point to the issue.
When I put the following DADS.CONF file in place:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "c:\oracle\product\10.2.0\db\Apache\Apache\images\"
AddType text/xml xbl
AddType text/x-component htc
<Locations /pls/apex>
Order deny, allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString ASGUSMAUDV01:1521:APPEXP ServiceNameFormat
PlsqlNLSLanguage AMERCAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword apex
Allow from all
</Location>
I cannot not even access the HTTP Server using the default connect sting. Any help in looking over the DADS.CONF file is appreciated.
Thanks

Contents of the ERROR.LOG
[Tue Aug 21 12:39:44 2007] [notice] FastCGI: process manager initialized
[Tue Aug 21 12:58:33 2007] [notice] FastCGI: process manager initialized
Both of these were using the blank DADS.CONF
Access.log (Blank DADS.CONF)
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET / HTTP/1.0" 200 15062
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/upperbox.gif HTTP/1.0" 200 153
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-green.gif HTTP/1.0" 200 952
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/green-content.gif HTTP/1.0" 200 809
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/blue-content.gif HTTP/1.0" 200 37
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrnse.gif HTTP/1.0" 200 148
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asytrsm.gif HTTP/1.0" 200 924
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrtb.gif HTTP/1.0" 200 901
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asysrt.gif HTTP/1.0" 200 1015
162.74.53.183 - - [21/Aug/2007:12:40:37 -0400] "GET /Tab_files/asylrhs.gif HTTP/1.0" 200 910
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/rhshadow.gif HTTP/1.0" 200 59
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asylttb.gif HTTP/1.0" 200 863
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asysrb.gif HTTP/1.0" 200 923
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/welcomeHTTP.gif HTTP/1.0" 200 2780
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/bisspace.gif HTTP/1.0" 200 43
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asybase.gif HTTP/1.0" 200 49
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/tree_document.gif HTTP/1.0" 200 97
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/art3.gif HTTP/1.0" 200 18752
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/lowerbox.gif HTTP/1.0" 200 150
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/relatedapps_cctitle.gif HTTP/1.0" 200 279
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/slieghright.gif HTTP/1.0" 200 69
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /Tab_files/asytlse.gif HTTP/1.0" 200 830
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/home_banner_2.gif HTTP/1.0" 200 6505
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/portals.css HTTP/1.0" 200 14795
162.74.53.183 - - [21/Aug/2007:12:40:38 -0400] "GET /ohs_images/space.gif HTTP/1.0" 200 43
I have found no other errors.

I need to download the httpd.conf file included in Yosemite update.

Where can I go to re-download the version of the httpd.conf that is included with the Yosemite update. Yosemite upgrades to a later version of Apache, and it puts a new httpd.conf file on the machine. When I update, my localhost server stopped working, and in my attempts to get it working again, I accidentally overwrite the file. So, I would like to get my machine back to the point of the update, so I can do a better job of correcting the problems, and getting localhost working again. Does anyone have a URL or anything I can go to to get a fresh version of httpd.conf for Yosemite? Thanks very much.

Yes, somebody could, but that is illegal. I'm sure you can understand that given this site is Apple's.
You can extract what you want from the installer package if you know how to Pacifist and have a copy of the installer application. Or if you own another computer running Yosemite, then you can get a copy from it.
If you ask someone to send you a copy while on these forums, then it's likely the moderators will dismiss you for the violation. I understand your situation, but no one here can help you without it causing a stink. I hope you understand.

Where is the ojsp.conf file located

The tutorial is kind of misleading. The jsp file is ready and the tutorial tell me to do the following steps
Before you can run the application you need to make sure that your HTTP server is configured appropriately. Perform the following steps:
1. Edit the ojsp.conf in notepad. This file is typically found in the <ORACLE_HOME>\Apache\jsp\conf directory. Add the following alias:
BUT I DO NOT FIND ANY ojsp.conf file at all. I searched for it too. How to go forward on this.
Secondly my apache server is up and running when I hit http://hostname:7777
now under which directory should i place the folder containing the jps on the server to run the application
Thanks in advance

Hi Mthompson,
Look at this on how to create the log file.
http://winrichman.blogspot.com/search/label/xdodebug
am sure, you did not create the email/smtp configuration, thats why you see this error.

Changing to 64 bit soon anyone know the important conf files to bakup?

hello (:
been running arch for nearly half a year now
just got my ram upgrades..
Was thinking of changing to arch 64 bit
Any one know what conf file to backup? ..can help me on this please ?(:
xorg.conf
pacman.conf
any more to back up ..?
um..oh ya .. is it possible to migrate a system architecture ? like changing 32 bit to 64 bit?

maybe /usr/share/{icons,themes} too
also, if you're running a desktop machine, you may consider installing a 64bit kernel on your 32bit arch [ http://bbs.archlinux.org/viewtopic.php?id=66660 ] so you can use skype, google gears, google earth, wine, firefox with enabled tracemonkey without tricks. no point for 64bit on the desktop ATM IMHO.

Error in the isqlplus.conf file?

Is there anyone else out there that gets this message? Each time I try to run my HTTP server to access iSQL*Plus, I get:
"Syntax error on line 92 of c:/oracle/ora92/sqlplus/admin/isqlplus.conf: FastCgiServer: redefinition of a previously defined FastCGI server "c:/oracle/ora92/bin/isqlplus"
Does anyone know how I can adjust this config file, or otherwise fix this problem?
Other than that, the Enterprise edition is up and running, including the SQL Plus app.
Any advice is greatly appreciated.
Thanks!
Eric

Hi Alison,
Thanks for the response! Unfortunately, I tried both of these, and neither seems to apply:
http://otn.oracle.com/support/tech/sql_plus/htdocs/runtime.html#isql_duplicate_entriesAt first, I thought this would be the problem, since I installed twice, but there was only one oracle_apache.conf file in the directory...
http://otn.oracle.com/support/tech/sql_plus/htdocs/runtime.html#isql_mutex_errorThis one actually talks about a different config file. I'm getting errors on my isqlplus.conf file. It's saying that there's an error b/c of "FastCGIServer: Redefinition of a previously defined Fast CGI Server" Here's what the config file looks like on that (in relevant part):
# Maps all virtual paths beginning with "/isqlplus*" to the iSQL*Plus
# FastCGI application
<IfModule mod_alias.c>
ScriptAliasMatch ^/isqlplus(.*) C:\oracle\ora92\bin\isqlplus
ScriptAliasMatch ^/isqlplusdba(.*) C:\oracle\ora92\bin\isqlplus
<Directory "C:\oracle\ora92\bin">
AllowOverride None
Options FollowSymLinks
Order deny,allow
Allow from all
</Directory>
</IfModule>
The other reference to the FastCGI server is here: <<#
# Setup the iSQL*Plus FastCGI application.
<IfModule mod_fastcgi.c>
FastCgiServer C:\oracle\ora92\bin\isqlplus -port 8228 -initial-env iSQLPlusNumberOfThreads=20 -initial-env iSQLPlusTimeOutInterval=30 -initial-env iSQLPlusLogLevel=off -initial-env iSQLPlusAllowUserEntMap=none -idle-timeout 3600
</IfModule>
Not sure about where else this FastCGI Server might be called, but it looks like one of the definitions is typographically different from the other. Could this be the issue?
Eric

What need to be transport to the production

Hi
I have done config of Service Desk and it is working in Development i had transported all the request created when the time of Customization. When i login to Production and type DSWP it is saying the no solution exist.
What are the other customization i need to transport in case of solution.
Point will be rewarded for the helpful answer
Thanks in advance

Hi Raghuram
I ran this transaction. when i ran this in Target systems when i click on sollution it is getting hanged.
When i tried in Source system it is
"Service cannot be reached
What has happened?
URL http://sapds1ci.zrh.swissre.com:8020/sap/bc/webdynpro/sap/dswp_su_solution_transfer_app call was terminated because the corresponding service is not available.
Note
The termination occurred in system DS1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:sapds1ci_DS1_20-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team "
Can you please tell me where i need to Run this transaction?
Thanks for your respose

What needs to be running on the machine to be controlled?

I've just bought a copy of ARD 3.3 and I'm confused: do I need to have it running on my desktop at work, if I want to control it via ARD from my laptop at home? I install it on the client or also on the machine to be controlled remotely? Is there a server portion? Where do I indicate that I'm allowing my desktop to be controlled by ARD?
thanks,
Mike

The client software is pre-installed on all Mac OS X systems. You turn it on in System Preferences -> Sharing -> Remote Management.
You'll need to install the Admin application on whichever machine you wish to control from (sounds like your laptop).

Using HP8500 wireless with other Macs but iPad2 does not see the printer on the network .. what needs to be done for the iPad to see the HP printer?

iPad2 doesn't see HP8500 wireless printer .. other Macs (Air & Mini) have no trouble printing ..

Same with mine. MacBook and pc both print fine but not my ipad2.

When user click on Submit in the salesquote then this submit action needs to be captured in the BeforeSave script file

Hi Expert,
Explanation:
In the sales quote there is a Submit in the Action Menu, so when a user click on the submit button then sales quote approval process triggers and
sales quote saved with Approval status as "In Approval" .
Requirement: Each time user click on the submit of sales quote then we have to record this action and update our BO for further calculation.
Issue: All BO elements in the ActionValidation-Submit script file are accessible but they are read only so can not be modified.
          So when you click on the Submit then immediately after submit action event beforesave gets trigger, so we build logic here but issue is that we           are not able to segerate this save even, I mean which SAVE is coming from the EXPLICIT save button on the UI or which save being triggered           from Submit Action.
Resolution tried: We found only one script for the submit action ActionValidation-Submit script file so we implemented this script but here all BO                          elements are read only, we can not modify those elements.
                         Even we are not able to return any variable on the validation submit script. so only we can return true/false that says validation is                          success or not.
My Question : How to capture the information in the event before save when user click on the submit on the sales quote.
                         So other than valiation script file is there any other appraoch by which I can acheive this. even in the global variable "this" I also dont                          find any varaible that is setting as true/false that refers to action triggers on the sales quote.
Thanks
Asaad

Thanks Meghana.. Appreciate your input.
We are doing this but the issue we are encountering is after the submit if other user changes sales quote and click on the SAVE button then we dont want this save from SAVE button on UI, so always whenever user click on the submit from action menu in the sale quote then we need to capture user information at the submit click.
Thanks
Asaad

(Need Help) how to clear the recently opened file list on Flash Player 11?

excuse me pals, may i ask how to clear recently opened file list under "File" tab on Flash Player 11 (the standalone player) ? i've tried to browse my registry but i can't find the solution (and i can't find the .mru files containg the list). my OS is Windows 7 32bit, i hope i can find solution here

I found it in the Windows registry under HKCU\Software\Macromedia\FlashPlayer

What needs to be confiugred in the dhcpd.conf file to support POAP?

Similar Messages

Maybe you are looking for