What network audio sounds systems (e.g. Sonos) are recommended to work well with Macs?

I'm looking to replace my audiophile stereo system with a network audio system at home. Had NAD components with English Epos hand-made speakers that sounded great, but very immobile. I need speakers in each room of the house that can be networked, but which sound good. Can anyone recommend a good system? I've heard that Sonos doesn't play iTunes and doesn't sound very good anyway compared to more high-end wired systems.
Have a MacBook Pro and a MacBook Air with Time Capsule router and Airport Express unit. All music on iTunes.

1) How does Final Cut Pro 6 handle native HDV?
Just like FC5.... no worries
2) Is it beneficial to convert to Pro Res 422
Just like the Cineform codec you will benefit from an all i-frame codec when working with titles and graphics. I wouldn't recommend capturing native then converting to ProRez as this will take an extremely long time. Many have found editing native up until the compositing then dropping the sequence into a ProRez timeline to render. I prefer to uncompress the HDV with hardware into a capture card and transcode on capture in real time. Depending on the flavor of HDV and the equipment you use you can probably find a method for this. I shoot run & gun field work on to tape, then with the deck I can export via HDMI and together with another product from Convergent Design it is converted to HD-SDI in the a Kona LHe into FC. The benefit for me is the all digital decompression from 1440x1080 4:2:0 to a 1920x1080 4:2:2 uncompressed HD-SDI signal to use anyway I need to. As to which level of PR I can't comment but I have used the lower level and it looks great. As to raid setup I can recommend www.maxupgrades.com to help you add two - four more drives internally for unbelievable speed and expanded storage space you will want. The owner (Syed) will give you all the support you need to take advantage of the Mac Pro capabilities for a low cost high performance raid solution. Sounds like you have a great setup in mind, you may want to look into the Kona LHe capture card for capturing and monitoring and a Convergent Design product like the HD-Connect SI or MI depending on the deck you are using. If you need broadcast quality monitoring look into the Matrox MXO.
Good Luck
Z1

Similar Messages

Bluetooth can find samsung sound bar but cannot keep the contact iPhone works well with s sound bar

I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
I can connect to samsung soundbar with my mac but the connection drops immediately. Please help

USE this
Search Terminal (on your tool bar on the top right hand side)
Paste this code:
defaults write com.apple.BluetoothAudioAgent “Apple Bitpool Min (editable)” 40
you can delete the number 40 and add any number between 40-60 (trial and error)
i have a samsung soundbar and i used 54 works and sounds great!!!!
http://www.youtube.com/watch?v=OJkx36m69Y4

Beats-Audio / Sound System Enhancement dv7 / HP Envy 15

Beats-Audio - Sound system Enhancement
Test system
dv7t – 6100 Quad / Windows 7- 64bit
Beats-audio
Introduction - Cave Sound Caper
Edits 29-Nov-2011
This is a re-write of this document.
Parts One and Two have been flipped. It's a work in progress.
The purpose of this Post is to provide a method to enhance the sound coming from your onboard beats-audio speakers. The quality of the sound should improve - more importantly, MORE sound should be available. This is important if your system is suffering from lack of enough sound from the onboard speaker system.
This process does not make use of the Loudness Equalization enhancement. I tested the Loudness Equalization enhancement (for a different purpose). Setting the enhancement on my test system and then switching the enhancement off resulted in the “Low Sound” syndrome. It took some amount of work to recover from that mess. The Loudness Equalization enhancement, in this author's opinion, is to be avoided unless its use is necessary.
FLIPPED:
The original intent of this procedure has been to provide a means to increase the amount of sound available from the onboard speakers on notebooks that are equipped with beats-audio IDT sound drivers. The “Pre-work” on my original post was overwhelming the intent. If your system is healthy, and the only reason to read this document is to enhance the amount of sound from the speakers, there is no need to hash through the work to fix your IDT driver installation. I’ve moved that section to the end – IDT installation and other work has become Part Two.
You must have your IDT HD driver successfully installed into your system.   The proper IDT HD driver contains the beats-audio interface.
Where to Start?
If you have “No Sound”, the Enhancement process may not work for your system. Please take a look at Part Two and decide whether any of the steps in that section apply to you. It is not my intention that you waste your time trying things you’ve already done over and over to regain the sound on your system. There are many posts on the forum on how fix “No sound”. This post addresses only a couple of “No sound” issues.   There is one slight possibility – see the section about the controls in iTunes – make sure your sound players volume controls are not mis-matched – and make sure you didn’t turn something OFF by accident. If you turned off the sound while watching a movie and now the HDMI sound is off - Poof! You might not have any sound – anywhere. It's just something to check...
If you have “Low Sound”, you might consider reinstalling your IDT driver to see if the issue can be corrected: IDT reinstallation is described in Part Two.
SideBar: As of 24-Nov-2011
If you have a dv7t: check on your HP Software and Driver website for a new IDT HD audio driver. Depending on your model, there may be a new version of the IDT driver, BIOS, and other important updates.
Part One
Some Setup Checks and on to the Enhancement
Make sure all basic Sound settings are set to “Default” to start.
Portions of this procedure are "not of my invention". Full credit will be given later in the Post. This section explains how to increase the amount of sound coming from the onboard speakers. It also attempts to give you a bit of control over the kind of sound coming from the speakers that you may not have at the present. Beats-audio is great; frankly, though - it's made for external powered speakers or headphones... what you get from the speakers on the notebook leaves something to be desired.
A while back I found a very interesting post on the topic of increasing the sound from the onboard speakers. The post was originally written for the HP Envy15. I believe the post has merit - Part One of this procedure is based on that original post.
I tested the suggested combined actions – it does work (at least on a healthy system). The sound quality showed improvement over the standard “out-of-the-box” beats-audio setup and the quantity of volume increased. In other words, this procedure makes the sound coming from the onboard speakers louder without the use of the Loudness Equalization enhancement setting.
I would suggest trying this “Enhancement” under the following circumstances:
Sound Quality is Poor, or the amount of sound from the speakers needs improvement
Sound is quantity “LOW”*
Sound is absent AND you believe the absence is NOT due to hardware failure.** See note on iTunes.
NOTES:
* If your LOW sound issue is severe, it may ONLY respond to using the Loudness Equalization enhancement, in which case this procedure is not recommended for your use. The two are not compatible. See Part Two.
** If there is NO sound on your computer, it’s possible that completing this procedure may not result in any improvement. See Part Two.
Sound Controls – iTunes, Media Player
I would add to the emphasis on checking the volume on one’s iTunes setting. If iTunes volume is turned down, the notebook’s speakers will respond to that – turn up the volume in iTunes without adjusting the volume in the volume mixer and the sound on the notebook will not increase properly (or will suddenly jump). It’s a juggling act and one that must be taken into account when the sound is being reset.   Additionally, if you have other audio players on your computer – in addition to those mentioned in the post – be sure to check them for volume controls: it is important during a sound reset that all the sound players be in sync. If you miss this, you may not get your sound back.
Check for this mismatch in sound volume controls if you do not have sound or if you did have sound and, at some point you turned OFF your sound while watching a moving, a DVD, a something on HDMI controlled audio - and suddenly - you do not have any sound. Sound controls get tangled up. Sometimes you just have to unplug it, but you do have to check the controls.
Sample Rate and bit Depth
I do not use the suggested Sample Rate and bit depth of 24bit 96000 Hz. My system cannot tell the difference and defaults everything to 16bits – my recording equipment cannot discern the difference.   My ears lack sample rate sophistication.   I’ve left my dv7t Quad sound, Default Format (sample rate bit depth) at 16bit, 48000 Hz (DVD Quality). Sounds fine and it’s where most of my crummy recordings are set anyway. Don’t lose sleep over this one.
Where’s my Taskbar ICON?
A couple of HP forum posts have mentioned the loss of the beats audio icon from the Taskbar tray – the icon should restore itself if one can force the IDT driver to reinstall. Without the IDT driver, beats-audio is not going to work. Assuming the driver has installed and one can reach the beats-audio panel from the Control Panel, THEN it’s possible that for some weird reason the Taskbar icon didn’t reset. It might be possible to try and force a reload of the beats panel controller into the Taskbar. I think this is the file.
For a 64bit system:     C:\Program Files\IDT\WDM\sttray64.exe
The Original Post and Credits:
The original procedure and excerpts from that Post follow. Edits have been made to make it easy to read and to follow. The credits and original link are at the bottom of this page. My thanks go to JJ and JJ’s HP Envy15.
From the Original Post:
Originally Posted by bigcat400
I find the volume on this machine extremely low. Unless the room is totally quiet I can't hear a thing. Is this normal on this system, or could it be a driver issue? I am running the latest sound driver from HP's web site.
From JJ:
It took me awhile but I now have the sound level about 3x what it was to start with. Try these tweaks:
Sound Enhancement Procedure
Control Panel > Sound > Playback > (Highlight) Speakers and Headphones > Configure
New Window ‘speaker setup’ > Test (should hear sound L/R) > Next >
           UNCHECK ‘Front left and right’ (if checked) > Next > Finish
Sound > Playback > (Highlight) Speakers and Headphones > Properties >
            Enhancements > bass boost > settings > 80 Hz / boost 3db > Apply
             Tone Controls > Bass +1 Treble +3 > Apply
             Advanced > Default Format > 24 bit 96000Hz > Apply
NOTE:
After this DO NOT use the Beats control (Fn + B) or it will reset the tone controls.
HP dv7(t)
Taskbar > beats-audio panel
OR
Control Panel > Beats Audio Control Panel
        Listening Experience > Graphic Equalizer > Custom
        -1, +8, +10, +8, +9, +9, +9, +8, +9
Remember that these are suggestions – start here and re-adjust later as desired.
LEFT SIDE
Make sure Beats Audio is CHECKED
        Click the “Music” radio (round) button
        65, 65, 85, 65, 65
NOTE: The Left Side settings are somewhat arbitrary. The “Center” setting is higher – this provides the most sound and should be set higher at least initially for testing, especially if your system has sound issues.
The next section is partially excerpted from the original Post – Remember: JJ’s post was written for HP Envy15 – please adjust your results accordingly. Edits have been made for readability.
Control Panel > Beats Audio Control Panel
Playback > Speakers and headphones > Arrow above Speaker symbol and Select Small Speakers
Select Equalization> Select 'custom'>
Adjustments for this are mainly to boost the signal level in the preamp so we get higher volume while not distorting the sound from the tiny built in speakers.
My setting values are as follows: left to right;
-1, +8, +10, +8, +9, +9, +9, +8, +9, +10
MAKE SURE TO CLICK SAVE WHEN DONE!
Note: Do not crank up the Bass (31hz) control or it will overload the speakers which can't reproduce this anyway, you can even turn down more if you have distortion at high volume.
Check that the slide controls for 'master' and 'speaker symbol' are all the way up.
This should make a big difference in sound volume and quality, and there is one last way to get louder sound. Depending on what you use to play back your audio you can adjust the program’s sound settings or EQ controls also.
In iTunes the EQ has a 'preamp' slider which I boost to about +6, this increases the output level while leaving the EQ settings alone (make sure to check the turn EQ on box).
Windows media player: you have to raise all EQ levels equally (not too much) to boost without affecting sound quality.
In general it is not a good idea to use more than one EQ system in an audio signal or you get more distortion, so don't adjust the EQ curves or bass/treble on more than one device. I chose the Beats / IDT EQ to make the tonal adjustments because it is the audio driver program and preamp that outputs to the speakers, so it should have the best sound quality.
Any adjustments before the preamp that add distortion will just be amplified, so go easy on adjustments in your play back programs.
Finally, when you play your audio,
Sound > Open Volume Mixer >
Make sure to click the Sound logo in the Taskbar so the slider pops up>
Click ‘mixer’ then you should see all the sliders for your devices;
You can independently adjust the levels for the right mix.
If you open the Beats panel and minimize it then a mixer slider also shows for this and you can dial in the effect of the EQ settings.
Headphones:
One last thing; When listening to headphones you will need to increase the bass EQ setting (since headphones can reproduce the low frequencies) in the Beats panel or I just change the drop down selector to the one with a flat curve (beats studio I think) -- the volume for my headphones was not an issue so I defeat the EQ for better sound quality.
Whew. I Didn't think it was this complicated when I started typing....
Hope everyone enjoys better sound with this.
JJ
ENVY 15 l i5 540M l ATI 5830 GPU l 8GB DDR3 1333 l 2 x 160 GB SSD l 1920x1080 glossy l Win7 Pro l 10,273 3Dmark06   Last edited by JJB : 12-27-2009 at 03:41 PM.
End of Excerpted Post
Credit belongs to the original author of the original procedure:
JJB from HP beats-audio / Sound Reset Procedure
Part Two
Loudness Equalization – and the LOW Sound Result
I was testing the system sound… CD playing in the background: Sting “If on a Winter’s Night” 02 Soul Cake playing through iTunes – standard speakers-headphones (beats-audio coasting along).
Sounds -> Playback Devices -> Speakers and Headphones -> Properties -> Enhancements
I have rewritten this part three times trying to get it right. Here’s the gist:
I switched on the “Loudness Equalization” enhancement. The sound jumped; it was loud and distorted. I switched the enhancement off – the sound dropped off and didn’t come back. I turned up the volume (with the slider) and down and up and down – and I was hearing Less and less sound from the speakers: “Low Sound Syndrome”: I was hearing what would be expected at setting of 7%. Well, that sucks. (Technical term.)
Based on this experience, I hypothesize that it’s possible to lose one’s sound entirely just by initially adjusting this one enhancement and then losing control over the ensuing ever diminishing returns. I didn’t continue to test this into a theory. It’s a hypothesis. If I had an extra dv7 sitting around, I might sacrifice it on such testing. I gave up right away and went into recovery mode while I still had some sound.
Recovery:
After the Loudness Equalization was turned off,
Recovery Attempts to recover normal sound levels included:
Resetting all Sound to Default settings,
Installing the driver from the webpage (standard load – download, double-click and install), reboot,
“Hard Reset”.
It was finally necessary to force load the IDT HD driver to recover the sound to its normal levels; that is, the driver was Uninstalled and allowed to reinstall at boot. (“Local” install from the Device Manager also works.)
Commentary:
I did not bother with a registry cleaning at this point - it may have made a difference, though it's unlikely since the driver needed to be completely reset by this time. I advocate registry cleaning! Bad things happen to good computers because of a dirty registry. Use your favorite or download CCleaner (free).
Try a Driver Update:
You can always check for Driver updates here – If the driver does update - you may be done with this part. Check the sound and proceed to "Enhancements".
At the Right-Click > Update Driver Software
Audio Driver “Uninstall”
Control Panel -> Device Manager -> Sound, video and game controllers
          Right-Click IDT High Definition Audio CODEC -> Uninstall
You have a choice at this point
If you do not have the means to replace your driver,
THEN do not delete your driver from the computer
OR - If you believe the driver is not working at all,
And / Or you have tried the standard Uninstall/self-install method previously without results,
AND You have the means to REINSTALL that driver from scratch*
Then you may delete the driver -
*Driver Installation From Scratch Requires the following:
You have your IDT HD driver on your computer as a sp*.exe file, for example, in Downloads
Reinstall with Boot:
Shut down the system
Reboot
The driver may install itself at login as the system scans for hardware changes
OR
Reinstall WITHOUT BOOT - Initiate the scan for hardware changes:
Right-Click on the IDT driver , > "Scan for Hardware Changes"
--> Check your sound at this point. It's possible that the driver has in reinstalled itself.
Manual Driver Installation - Comments:
There are a couple of paths used to get the IDT driver onto your system. You can download it from your HP Software and Driver website. You may have been given the path to your IDT driver at the HP ftp softpaq site. The package is downloaded as a sp*.exe file.   You may download the software as often as you need it. Make sure you have the package downloaded before you delete your driver.
Once you have downloaded that package onto your system, the original sp* file will stay intact. As long as you do not delete it, you can reuse it. Once you do install the driver onto your system, an installation directory is created in C:\SWSetup, named the same as the sp* file (without the .exe extension).
In C:\SWSetup\sp* are all the files necessary to reinstall your driver. If you install the software from the sp*.exe file in your Downloads folder, the new installation will ask you whether to overwrite the data in the SWSetup/sp* with the contents of the .exe package – do it. The reinstallation is just unwrapping and redistributing what’s in the .exe file into the same SWSetup/sp folder.
If the "Driver Store" is removed, that is, if the driver package is ever removed from C:\SWSetup, you can reinstall from the sp* file as long you you have it in your Downloads folder - it will recreate that SWSetup/sp* folder.
What about Versions?
Latest is Usually best. If you are concerned AND you think you may not be able to get another a copy of an older driver that is in C:\SWSetup\sp*, make a copy of the folder before uninstalling any driver or making any changes.
Installation from the Original sp* package
Find the sp* file on your system. It will be most likely be located in your “Downloads” folder.
Simple Driver Installation from the 'Saved' installation sp* file:
Close everything that isn’t needed, browsers, games, windows…
Right-Click on the installation package (the sp* file), Select 'Run as Administrator' and start the installation
Answer any questions…and follow the instructions
or...
Installation from the Device Manager
If the driver software is still on the system from a previous installation, it is located in C:\SWSetup
You can tell the Device Manager to access the package on the system:
Control Panel > icons > Device Manager > (Highlight) IDT High Definition Audio CODEC >
                      Right-Click > Update Driver Software > Browse my computer for driver software
                      Browse to C:\SWSetup\sp*
                      Be sure the “Include Subfolders” box is CHECKED
27-Nov-2011
Audio Services Check / Restart
This section is not strictly part of the "Enhancement" procedure. It has been included because it is necessary that these settings be correct so that the sound can function properly. If you are not having sound issues, skip this part...
Check system Services to make sure that your sound related services are running as they should.
Restart each service (except as noted): Right-Click > Restart
Control Panel -> icon -> Administrative Tools -> Services > bottom of page > Standard (optional - makes it easier to column sizes)
Sound services must be showing as
Status = Started
Startup Type = Automatic
Sound Services:
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
Power (check only)
RPC (check only)
That’s it.
It’s a matter of tweaking the settings to get results. Do not forget that that Left/Right Speakers setting is turned off in Speakers Configure. It’s not a big deal (assuming this works), but it’s DIFFERENT and it needs to be kept track of.
I hope this helps your sound work better!
Kudos are Earned!
Kind Regards,
Dragon-Fur

Nice extensive research on reseting Beats Audio on the HP laptops.
Just bought the Envy 17t-3000 and I updated all the drivers via HP Support Manager.
BEFORE the update, the Beats Audio worked well..
1. Press the dial and the popup box comes up ~3 secs
2. Volume indicator swirl appeared to show volume level
AFTER the update, something changed the Beats Audio... had to re-install the latest driver from HP website (even after contacting HP Tech support via chat and email several times)...
1. Press the dial and the popup box comes up ~10-12 secs now!
2. Volume indicator swirl DISAPPEARED so volume level indicator is GONE
Sure the sound works but NOW I do NOT know or remember the volume level whenever I listen to music.
You can barely tell on the Windows Speaker icon on Icon bar since 2 sound waves indicate at least 50% sound level but that's it!
I have the following softwares and checked their settings and set them all at 50% and use the Beats Audio dial to control the volume whenever the programs are used:
1. WinAmp
2. VLC player
3. MPC
4. WMP
No matter what I try, it appears that the Beats Audio Volume Control Swirl Indicator is GONE! Worse, there's NO Windows volume control indicator unless leave the Volume Mixer open!
Anyone know how to fix this problem and bring Back the Audio Beats volume indicator??
Thanks!

HP Pav dv7t-6100 CTO w/Beats Audio sound system reverberates at levels above 50%.

HP Pavilion dv7t-6100 CTO Entertainment Notebook PC with Beats Audio sound system havingf volume distortion issues. At levels above 50% everything has ab reverb effect that gets worse the louder the volume. Using Win 7 Hm Prem.
This question was solved.
View Solution.

Issue resolved itself.

No sound but it works well with headphone

Dear all,
Can anybody fix my problem. I bought iPad 1 year 8 days back. My iPad external speaker has stopped working.however it works well with headphone. I have tried all methods like holding home and sleep button for ten seconds,reset to factory setting,all other trial given in differ
ent forum but in vain. Now can anybody tell me what shall I do. Also since it is more than 1 week after expiry of warranty will apple help me to fix the problem.

Satellite 1710CDS
just upgraded to windows xp.
Even if you max out the memory to 160 MB, it's too small for XP to run properly. Not surprised you can't locate drivers for XP.
You can, however, find the drivers for Windows 2000 (which I prefer to XP anyway). The sound driver is included.
Go to the Canadian download site and look up the Satellite 1710CDS.
-Jerry

What dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

what dj mixer will work well with my iMac os x lion 10.7. I have installed virtual dj and djay apps.

Hello. I was wondering what version of xcode may be installed on an old powerpc powerbook G4 with mac os x 10.4.11. What version? where may I download it from? Thanks a lot!

Hello friends
I was wondering what version of xcode may be installed on a powerpc PowerBook G4 laptop with Mac OS X 10.4.11. What version would work on it? Where may I find it? I use the X11 package a lot.
Thanks a lot!

You can download it for free from the Apple Developer Connection web site, but you have to have a membership. Go to this page:
http://developer.apple.com/products/
Scroll down to the bottom of the page and the bottom right choice is the free online membership. Once you're signed up, you can log in and Download the Xcode tools. There will probably be several to choose from, including Xcode 3 and Xcode 2.5, so make sure you get the right one.

Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut pro would work well with it? many thanks

Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut Pro series would work well with this set up ? regards

How much Ram? Final Cut Pro X is the only version curently developed and is available on the App Store.

We have moved to another city and we would like to communicate to our friends and family back home via Skype. What webcams work well with our home computer, a vintage 2005 Mac mini with Mac OS X, version 10.5.8?

We have moved to another city and we would like to communicate to our friends and family back home via Skype. What webcams work well with our home computer, a vintage 2005 Mac mini with Mac OS X, version 10.5.8?

You 2005 mini shipped with a PowerPC G4 CPU ranging between 1.25 and 1.5 (late sept 2005) Ghz. PowerPC is not Intel. This mini will not run current releases of Skype for the following reasons:
The current version of Skype claims support for OS X 10.5.8 -- but wants a 1Ghz Intel processor just for voice calls. Their recommendation for video calls is a 1.8Ghz Core 2 Duo Intel CPU and a broadband connection of at least, 4Mbps down and 512Kbps up. Skype requirements.

The App Nike Running is not working well with my Ipod touch 5 th generation It always gives me the wrong distance and velocity. Is it normal? What could I do?

The App Nike Running is not working well with my Ipod touch 5 th generation It always gives me the wrong distance and velocity. Is it normal? What could I do?

Are you using the shoe sensor?
Try:
http://www.apple.com/support/nikeplus/troubleshooting/

What external drives work well with a late 2011 MacBook Pro? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also should I avail myself of something that works with Thunderbolt or Firewire?

What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

I have aMacBook Pro with Mountain Lion operating system. Does MacKeeper work well with this Operating System

I have a MacBook Pro with Retina Display. My operating System is Mountain Lion 10.8.5 Does MacKeeper work well with Maontain Lion 10.8.5 and provide good Virus protection? Appreciate the support.

The Hatter:
Thanks for the input. So far the responses I've received are all the same. I will not be purchasing MacKepper.
Beracha007

What's your sound system ? Home Theater ? PA ? other options ?

Please chime-in and post your system even if you have no other comment .
I just ordered the supped-up iMac and Logic Pro and I am excited to get started .
Now I'm just using my old Pioneer stereo system which really puts out but it's a mess of wires and I would like to get a new system .
Option #1) I'm looking for a small PA like the Passport 150 . Anybody ever use their pa for sound ? What about the Bose Column PA's ?
#2) There are lots of home theater systems in all price ranges since logic does surround sound .
#3) Pro studio speakers . I don't really see why they cost more ??
As a horn player I do like to turn up the volume sometimes to play-along so little computer systems (even really good ones) would probably not do .
Powerbook eMac Mac OS X (10.4.6)

Pro studio speakers . I don't really see why they cost more ??
well this is a pretty simple one.. because studio monitors are actually a great deal better than home theatre speakers, in terms of faithfull reproduction of sound.
fact is, most sound systems for the domestic market are not much more than cheap components put together in nicely designed boxes. the boxes range from nicely designed to very nicely designed, and some high end ones are even extremely nicely designed.. boxes. made of either nice wood, very nice wood or extremely nice wood. then, you print a pretty, lifestyle-ey brochure, full of fancy looking diagrams and lots of talk of acoustics and transducers. these brochures range from nice to very nice to extremely nice, depending on how much you want to sell the system for, targeting exactly the kind of living room that it is designed to look good in.
if you want to use logic to record and produce music properly, you'd be better off going for monitors that are intended to let you hear what is going on as best as possible, as opposed to a system that is designed to give as exciting a listening experience possible for watching DVDs in surround, while looking well-coordinated with the sofa. the studio monitor market is pretty broad right now, there is a good choice of very decent powered monitors available at fair prices.

Extended router's network for Airport extreme. Works well with MacbookPro. I can print with notebook with XP SP3 and, I can see the USB-harddisc in the Airport service program but, I cannot use it. I have set filesharing etc. What do I do wrong?

I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Which version of Adobe Flash works properly with Mac operating systems?

http://www.youtube.com/watch?v=no0Fn_gIoCo
On Xat Flash Chatrooms it freezes. I thought Adobe Flash Beta 12 would fix my problem of the chats animations and chat freezing but it only temporarily fixed it because when I rebooted my Mac it still freezes the animation and chat! The latest versions of Adobe Flash non-beta Adobe Flash 11 something freezes too! Which specific Version of ADOBE Flash works properly on Mac OSX? NONE?
I'm on Safari Browser and Mavericks 10.9 OSX.
Specs:
Haswell 3.4ghz
graphics card: gtx 760
4 gigs of ddr3 ram
Macbook 2009: My other mac that does it too
Intel duo 2 core 2.13ghz
4gigs ddr2 ram
I believe my macbook is running Nvidia 9400m 250mb card
So each Mac that has had this problem is running Nvidia tho I don't know if thats the problem and I doubt it is. I'm sure it's a bug in Adobe Flash and Apple not caring enough to address the problems with Adobe Flash not working properly. If the two companies can't get a long, then why doesn't apple spend a little bit of money making their own compatible Flash for their safari browser?
My friend who is a girl that I talked to on Xat said that she has a Macbook I think from 2010 or 2011 running Mavericks and her Macbook does not freeze. Is there an explanation to why my Macbook 2009 freezes in Adobe Flash and if there's a solution to it? Is her Macbook running ati card maybe?
This is becoming very frustrating, so I need a solution. It does this on my Macbook and my Desktop Mac both which have Nvidia gpus.

The latest Flash 11 works fine for me on Mavericks, on every site that plays videos.
I have no idea what Xat Flash Chatrooms is (and really have no interest), but it sounds like the issue is with that site, as Flash in general works for literally tens of millions of people on most other sites.

What network audio sounds systems (e.g. Sonos) are recommended to work well with Macs?

Similar Messages

Maybe you are looking for