What NI hardware to use?
Hi,I want to build a system which collects the pressure data at 10MHz sampling rate.
I have checked with NI and I got that the C-series modules wont go at that high speed.
Can anyone suggest what NI hardware should I use to meet my requirements.
Thanks,
Ninad Regundwar
Thanks,
Ninad Regundwar
Junior Engineer | ARAV Technologies | www.aravtech.com
You may consider using digitizer, http://sine.ni.com/np/app/main/p/ap/mi/lang/en/pg/1/ps/30/sn/n17:mi,n21:40/.
Similar Messages
-
hardware test using an external optical device (iMac) on macbook pro 9 years old via firewire. What to do? and how to do it?
I thiunk the graphic card is defective and need to run hwtYou don't.
Need a internal optical drive and the Hardware Test on disks is old and outdated anyway.
Your machine has lasted a long time, congratulations, they usually only last about 4-5 years.
They get clogged up with dust and overheat, kills the video card, there is nothing you can do as it's hardware damage over time. -
FAQ: What system hardware should I use for Photoshop?
We all know we can find the Minimum System Requirements on the side of any software box. For the most recent version of Photoshop you can check the Tech Specs. If you'd like info on the older versions, you can check here.
What does it mean if your computer meets the Minimum System Requirments? Well, you'll be able to install and launch the software without an error. Not meeting some of the minimum requirements could result in a hard or soft stop when installing. A hard stop prevents the installation from continuing because critical requirements are not met. A soft stop is a warning that you may encounter issues if you continue, but you can make that judgement on your own.
But meeting the minimum requirements isn't necessarily give you a happy experience with Photoshop, especially if you work with large file normally. We normally don't make recomendations on the type of hardware you use on your system. We've changed our minds. Here is a list of recommendations for Good, Better, and the Best systems:
System and hardware recommendations: Beyond the minimumHello Brinmr,
i do not hava license for matlab so i can not test it.
On this page you found the supported NI hardware and here is the information the 6008 can be
used in session mode Supported Hardware - National Instruments- NI-DAQmx
and if i understand the function startForeground correct is this a session mode function.
You can made some tests with a simulated 6321 or 6251, but if this also not works then you should contact
the mathworks to ask them how you should implement your functions with mathlab.
best regards
Alexander Glasner
AE NIE -
What's hardware should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?
What's hardware or software should upgrade for Using Premiere CS4 to editing (AVCHD)m2ts file?
1st question: when i try to do editing by using Premiere CS4 AVCHD sequence timeline, the edting monitor seems not smooth (like wearing goggles) & delay, and when i use AME to encode m2ts file (which not yet edit) to AVI file (about 1 hour), it take 2h 13min to finish, is it normal?
2nd question: i use mpeg2 HD 1440 file to do eding, the edting monitor also not very smooth but better than using m2ts file, after editing done, i try to encode these mpeg2 HD 1440 file (which edited about long 1 hr) to a New file mpeg2 1440 X 1080i HQ or even mpeg2 Pal DV HQ file, the encoding was not runthe encoding after wait for half an hour. How many hours it take usually????
3rd question: i use m2ts file video file to export as a Bitmap, 1 frame 1 picture bitmap, it take long time too, about 1 or 2min to finish encoding, if i export more than 1 picture, it take even more time, i have experienced it, 3 or 4 pictures need about 10 or 15 min to finish encoding. i used to using mpeg2 HD 1440 file (which edited file) to export frame as picture, it not run the encoding at all. WHY ????
i'm new in Premiere CS4,so i got many question about Premiere CS4, usually i use Premiere Pro 1.5 version
my computer is: Intel (R) Core (TM) 2 Duo CPU
E7400 @ 2.80 GHz
2.80 GHz, 2.00 GB RAM
Graphic Card: ATI Radeon X1650 series
2 Hard Disks in my computer (C Drive is 300 GB (not sata) , D Drive is 500 GB sata)
4th Question: Premiere CS5 & Premiere CS4 which one is better ???
5th Question: What's different ATI Radeon and NVIDIA Card, which is better, which u suggest to. What is different Graphic Card and Video Card ?? Should i install HD Video Card ????I don't think a core-2 will work very well with AVCHD... you need at least an Intel i7 920... or whatever is current
My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built... since the GTX 285 is no longer sold, I would now go with a GTX 460 or whatever is the current "best bang for the buck" - AND I would buy 4Gig-by-3Sticks memory to be able to expand from 12Gig to 24Gig if needed
For my home hobbyist, family movies (which means that I am not trying to recreate Star Wars with video effects or many layers) AVCHD editing is "as smooth as spreading warm butter on hot toast" (also the MP4 video from wife's Flip camera)
My 3 hard drives are configured as...
1 - 320G WD Win7 and all programs
2 - 320G WD Win7 swap file and PPro projects
3 - 1T WD all video files... read and write -
The iphone 4s has a slot on the left side of the hardware? What type of slot is it and what can it be used for?
The slot is on the right side and it's for the SIM card.
-
Can anyone tell me how to find what OS I'm using on the Mac?
Tiger or Leopard?
Also, how do I update from 10.6.8 to the latest version?Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
You current OS X version number will be shown as I've marked.
OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
Whether or not you can go to the latest OS X version depends upon your hardware -
You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater. -
I am using Linux mint 12 with firefox.
Everytime I try to type something in the search box a further box appears to tell me this is a JSON file and what program should I use to open it.
This has only happened since reinstalling my system a couple of weeks ago.
I am not really interested in what a json file is I simply want to get rid of this pop up box.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*[[/questions/921535]] -
I want to clean all of the cookies and bugs that are in my computer causing it to be slow. What program should I use that is safe and won't mess up my computer?
Problem description:
I would like to clean up my computer. Its beginning to run slow and I believe cookies and bugs are apart of the reason.
EtreCheck version: 2.0.6 (91)
Report generated October 26, 2014 at 4:59:31 PM EDT
Hardware Information: ℹ️
MacBook Air (13-inch, Early 2014) (Verified)
MacBook Air - model: MacBookAir6,2
1 1.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel HD Graphics 5000 -
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 13 days 2:41:41
Disk Information: ℹ️
APPLE SSD SD0128F disk0 : (121.33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 120.47 GB (70.38 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. iPhone
General USB Flash Disk 16.13 GB
S.M.A.R.T. Status: Verified
MSD (disk1s1) /Volumes/MSD : 16.13 GB (11.18 GB free)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] foo.tap (1.0) Support
[loaded] foo.tun (1.0) Support
Startup Items: ℹ️
tap: Path: /Library/StartupItems/tap
tun: Path: /Library/StartupItems/tun
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Daemons: ℹ️
[failed] com.apple.wdhelper.plist
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.perion.searchprotectd.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[running] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.jdibackup.ZipCloud.autostart.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins: ℹ️
TroviNPAPIPlugin: Version: 1.0 - SDK 10.9 Support
Safari Extensions: ℹ️
Trovi Search for Safari (Disabled)
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
53% mds
9% WindowServer
3% mds_stores
3% storeagent
2% hidd
Top Processes by Memory: ℹ️
920 MB mds
31 MB com.apple.WebKit.WebContent
30 MB Messages
29 MB Safari
21 MB WindowServer
Virtual Memory Information: ℹ️
31 MB Free RAM
713 MB Active RAM
681 MB Inactive RAM
1.09 GB Wired RAM
17.85 GB Page-ins
1.95 GB Page-outs -
Hardware identification using Java-application
Hi,
please help me! I would like to get some hardware-specific information using a Java-application? Is it possible?
Thanks everybody,
dzsitterProbably not, in pure Java. Depends on what the "hardware" is that you had in mind.
-
How to tell what recovery point was used for restore
Is there a way to determine what recovery point was used for a restore after the restore was started.
The question comes from the experience of having a package installed but not being able to build it from the same PKGBUILD (due to nontrivial issues). The package must have been built successfully by *a* build system, so ideally one would want to replicate that build. The relevant differences I could think of are the compiler flags and to a lesser extent the hardware build platform.
You should describe these supposedly non-trivial issues. I've never experienced what you describe in my years using Arch, nor have I ever heard it suggested that the famously vanilla Arch packages are built using some sort of unconventional compiler flags. I have heard multiple developers say using highly modified CPU optimizations and modified linking and such are mostly pointless, however. So I'd bet a week's pay that the build system uses vanilla GCC with the default settings. Why would the thing that actually builds Arch Linux be the one part of the Arch ecosystem that doesn't abide by the Arch standards? Why would only some packages have library linking problems and such when all packages are built on the same machine against the same library versions---and thus the conditions resulting in a failed build would be identical to those in a successful build? I could be wrong, but I think you're on the wrong track. The quickest way to find out is to describe what the real problem is, not what you imagine the solution to be. -
What is different between using Scriptlet and VBA
Did any know what is different between using "Insert test Scriptlet" and VBA (on Cusom Page Programmability node)?
It?s really the environment used. Scriptlets are Microsoft VB Script which is a loose scripting environment with no variable declarations, no intellisence, microhelp, etc. VBA is actually the full VB6 for applications language environment that provides a very helpful integrated development environment, variable declorations, library references, intellisence and more. VB Script generally uses less system resources, but with powerful hardware today we find that VBA meets all our needs. VBA Also easily allows the use of global modules and class files.
-
Oracle Application Hardware Migration using Acronis
Hi,
I’m an Oracle Applications DBA and would really appreciate some other DBA input on the following question.
I have a customer that uses Acronis to backup,restore and image Oracle Applications. Their current instance (11.5.6) is running on really old kit. As a test the windows guys have restored oracle Apps onto a brand new server and started the services. This has worked, which is to be expected (that’s what Acronis does).
My question is “Does Oracle support this method of hardware migration using Acronis”. My understanding is that for hw migration either autoconfig or export+import were the only Supported options.
I know that 11.5.6 is unsupported and come to mention it so is their OS and the fact that they use images as clones. This aside I would be interested in other opinions on weather Acronis is strictly for restoring/imaging a duff system or in fact weather it would be supported by Oracle for Hardware migration. ( With some reasoning please).
I have checked metalink with only one hit (643276.992) but this does not directly answer my question
Thanks in advance to anyone who can reply to this.
Cheers
JamesYes you will be able to do that (migrate/upgrade your 10g Forms & Reports applications to 11g Forms & Reports) and deploy on Oracle Fusion Middleware 11g.
Note that FMW 11g release having Forms & Reports is not yet out. I am not sure about the exact time frame but it is expected to be out sometime this calendar year.
Thanks
Shail -
ACE 4710 what are these ports used for?
Hello, what are these ports used for please? What can I do with them?
Thank you
Sent from Cisco Technical Support iPhone AppHi Bilal,
They are reserved for future use. Please have a look at the link below:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/4710/hardware/installation/guide/Overview.html#wp1043136
Regards,
Kanwal -
"Windows Setup could not configure Windows to run on this computer's hardware" error using MDT
Good day. I am using Microsoft Deployment Toolkit to deploy images to a group of ClearCube R3080D bladed PCs. Below are the server details:
VMware virtual server with Server 2008 R2 Enterprise Service Pack 1
Microsoft Deployment Workbench Version 6.1.2373.0
Management Console 3.0 Version 6.1(Build 7601: Service Pack 1)
Windows Deployment Services Version 6.1.7600.16385
The image I am deploying to the blades is that of Windows 7 Enterprise x64 Service Pack 1 with Office 2010 and a few other third-party applications.
I have pushed this image to literally hundreds of blades successfully. I had a problem with one blade and found that the HDD was faulty. I RMA’d that HDD and installed the replacement. I pushed the same image to the blade and it works fine to the very end
then I receive the error ”Windows Setup could not configure Windows to run on this computer’s hardware.”
I have checked the BIOS configurations on this blade and they are identical to those of several known good blades. In fact, I swapped HDDs between a known good blade and the blade in question. The problem seemed to follow the HDD. Therefore, I assumed that
ClearCube sent a faulty HDD. I had the identical problems with a second HDD from ClearCube so I’m sure that the HDD is fine.
I have read through http://support.microsoft.com/kb/2466753
as well as many other questions posed by other folks and I have yet to find a good solution.
Again, this image works on all other blades that are of the same model and the HDDs are also of the same model. I'm quite confused!
TonyTony?
What are you doing posting the same question 5 times, within 3 hours???
http://social.technet.microsoft.com/Forums/en-US/67f72721-da1b-42bc-b373-9064fe1a8245/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/9e7ca626-5b67-4a3f-ade0-4bac767e060f/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
http://social.technet.microsoft.com/Forums/en-US/8c508acc-ad40-4608-911c-fbfbc5e293fe/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdthttp://social.technet.microsoft.com/Forums/en-US/a8a98fce-0ddf-4a59-ba8a-9acab7de0c5e/windows-setup-could-not-configure-windows-to-run-on-this-computers-hardware-error-using-mdt
If this post is helpful please click "Mark for answer", thanks! Kind regards -
What cable can I use to transfer old VHS tapes from my VHS player to my new IMac and IMovie (VHS to DVD transfer)? And where would be the best place to purchase such a cable? My VHS has only coaxial or RCA plugs as outputs. The IMac has firewire cable inputs.
Fixit2at,
Welcome to the Discussions.
It's more than just a cable you need.
To go from VHS to iMovie requires converting an analog video signal to digital.
Some miniDV cameras have an analog/digital pass through mode. If you have access to such a camera, that may be a solution.
If not, you'll need some hardware, such as this:
http://www.canopus.com/products/ADVC55/index.php
or
http://www.canopus.com/products/ADVC110/index.php
Matt
Maybe you are looking for
-
How can I share my photos with family with text to ID the photo
I have our families' photos on CD/DVD/my Mac's but I would like to share them with the rest of the families by way of CD/DVD. I'm also probably the only one in my family who could id the subjects in the photo's......how can I use text ON the photo
-
My apple tv is not picking up my iTunes library?
I have my Apple tv all setup and working. it's connected to my wifi. However, it is not picking up my Itunes library. I have the right I.D. and password on. I've turned on home sharing on all my devices. I've reset my router and even turned of my fir
-
I exported a video from FCP 7 as a .mov with chapter markers to use in DVD studio pro and it gives me this error: Help =[ Process: DVD Studio Pro [1263] Path: /Applications/DVD Studio Pro.app/Contents/MacOS/DVD Studio Pro Identifier: com.
-
How much does it cost to use FaceTime?
I have unlimited 3G access on my iPhone. Using FaceTime, will it cost like a normal phone call or will no additional costs apply? Either way, when connected to wifi, it is for free? Thanks!!
-
What makes the separation in VL10X ?
Hi ! It would be big help if you could help me with stock transfer document (sorry, I don't know how to say in English) made by ME21N. I made 2 stock transfer documents by ME21N ,and tried to make delivery document by VL10X, with the idea that I coul