What Novell Client to use in SLED11?

Hi!
Im very confused now!
I have SLED11 64bits version. I installed the Final Relase of Novell Client 2.0 SP2 64bits version. Novell require the 64bits version on 64bits OS or the GUI-Login will not work.
The problem is that I need to use IDM Designer and it seems to not work with the 64bits version of Novell Client.
So i was checking and i see there is an BETA og Novell Client 2.0 SP1, but isnt the final release og 2.0 SP2 a newer version? How can the BETA be SP1 and the final release SP2?
Now it looks like a have to downgrade SLED11 to 32bits and use the BETA of Novell Client since somone get the Designer to work in this enviroment.
Anyone?

On Thu, 14 May 2009 07:06:01 +0000, ronnys wrote:
> So i was checking and i see there is an BETA og Novell Client 2.0 SP1,
> but isnt the final release og 2.0 SP2 a newer version? How can the BETA
> be SP1 and the final release SP2?
Ignore that. The only version of the client you can use with SLED11 is
NCL 2.0 SP2.
> Now it looks like a have to downgrade SLED11 to 32bits and use the BETA
> of Novell Client
No, you would use the 32-bit version of NCL 2.0 SP2.
Joe Marton
Novell Knowledge Partner
SUSE Linux Enterprise 11 is ready for action.

Similar Messages

Product type 56A - what do clients use as the underlying

Hi All
I now understand that you associate some borrowing transaction type/product type combination to product type 56A as a facility in the 'Admin' tab.
The question I have is what do clients normally use as the product type/transaction type combination for these facilties? Do they do like a 0% interest 55A/200 or do they set up a fixed interest 55A/200. I mean I am not sure what to advise the client of mine to use. What product type to use, where to give the injterest (in the 56A or the underlying product type)
Your thoughts & inputs are appreciated.
Thanks
Regards
Morgan

Hi Morgan,
just to add a few words to what mentioned by Ravi.
Facility or credit line is a kind of guarantee, that you as a borrower will be able to borrow some maximum agreed amount of funds during certain period of time. And, of course, usually you need to pay certain price for that. Pricing itself really depends on competitive environment.
So, overall you have 2 type of expenses:
--- interest expenses on facility/ credit line (Product category 560);
--- interest expenses on real borrowing/ drawing (earlier mentioned instruments fixed-term deposits, interest rate instruments, etc.). Usually, interest rate here depends on number of factors, like credit quality of borrower, benchmark yield curve for specific currency, etc., and is almost >0, cause money has certain price.
hope this will help you.
Rgds,
Renatas

Novell client for linux - scripted install and configure

the novell client is included in SLED11 SP1
the configuration files are in /etc/opt/novell/ncl (esp login.conf)
I want to script the configuration of the novell-client. Some of the things the interface yast - Novell client does, is:
modify /etc/pam.d/gdm
create /lib/security/pam_ncl_autologin.so
... and maybe more....?
according to Novell Documentation there should be a make_novell-client-conf_rpm Bash script but i cant find it in any of the recent clients (download) nor on the SLED installation.
I think just copying pam.d files and the .so file will work, but might cause troubles in the long run.
What should i do to create these by script?

Originally Posted by lowalcohol
assuming this will do the same as installing it from yast - software, the client is not configured (tree, context, slp) and lacks key files such as /lib/security/pam_ncl_autologin.so needed for integrated login.
/lib/security/pam_ncl_autologin.so is updated by the post processing inside the rpm's. We don't need to do anything. however there is much to do. i'll show what i do. You need to change the variables and entries to suit your env.
create a repo on a build server using the following in fstab
Code:
/srv/www/htdocs/iso/novell-client-2.0-sp2-p2-sle11-i586.iso /srv/www/htdocs/novcli2.sp2/i586 iso9660 user,auto,loop,uid=30,gid=8 0 0
/srv/www/htdocs/iso/novell-client-2.0-sp2-p2-sle11-x86_64.iso /srv/www/htdocs/novcli2.sp2/x86_64 iso9660 user,auto,loop,uid=30,gid=8 0 0
add a repo to the install
zypper -n ar --refresh http://build/novcli2.sp2/$PROC "Novell client 2"
add in bits for ldap
Code:
cd /tmp
wget $WEBPATH/ldap.tbz2
if [ -s ldap.tbz2 ]; then
cd /
tar xjvf /tmp/ldap.tbz2
cd /tmp
fi # if [ -s ldap.tbz2 ];
echo '+::::::' >>/etc/passwd
echo '+' >>/etc/shadow
echo '+:::' >>/etc/group
ldap.tbz2 contains the following after they been changed by 'yast ldap'.
\etc
\etc\ldap.conf
\etc\nsswitch.conf
\etc\openldap
\etc\pam.d
\etc\openldap\ldap.conf
\etc\pam.d\common-account-pc
\etc\pam.d\common-auth-pc
\etc\pam.d\common-password-pc
\etc\pam.d\common-session-pc
add in the client
Code:
zypper --no-refresh --no-gpg-checks -n in -l -t pattern novell-ncl
#lock the files to protect them from future 'zypper dup'
zypper al nici64 novell-client novell-client-script novell-konqueror-plugin novell-nautilus-plugin novell-nmasclient novell-novfsd novell-qtgui novell-ui-base novell-xplatlib novell-xtier-base novell-xtier-core novell-xtier-xplat yast2-novell-client
chkconfig micasad on
configure the client
[CODE]
sed -i s/";net.slp.useScopes.*"/"net.slp.useScopes = FRED, LARRY"/ /etc/slp.conf
sed -i s/";net.slp.DAAddresses.*"/"net.slp.DAAddresses = 10.251.1.99, 10.249.1.99"/ /etc/slp.conf
mkdir -p /etc/opt/novell/ncl
echo Allow_Integrated_Login=true >/etc/opt/novell/ncl/login.conf
echo Default_Tree=XXXXX >>/etc/opt/novell/ncl/login.conf
echo Default_Context=XXX.XXX.XXX >>/etc/opt/novell/ncl/login.conf
echo Default_Server=servername >>/etc/opt/novell/ncl/login.conf
echo DHCP_Tree=true >/etc/opt/novell/ncl/protocol.conf
echo DHCP_Server=true >>/etc/opt/novell/ncl/protocol.conf
[CODE]
(reboot)
These are files installed during build stage, but are used when the client logs in.
in /etc/skel/.novell/ncl, i have a copy of StartupLogin.conf as StartupLogin.conf.new
this file has information in it, but it will be wiped.
in /etc/skel/.kde4/Autostart/logon.sh, i have
Code:
if [ ! ~/.novell/ncl/StartupLogin.conf.new ]; then
mv ~/.novell/ncl/StartupLogin.conf.new ~/.novell/ncl/StartupLogin.conf
FDN=`ldapsearch -x -h 10.251.1.99 -b ou=its,o=fca | grep -i 'dn:' | grep -i $USER | grep -iv workstation`
CONTEXT=`echo $FDN | cut -d, -f2- | sed -e 's/ou=//ig' -e 's/o=//ig' -e 's/,/./ig'`
sed -i "s/UserName.*/UserName = $USER/" ~/.novell/ncl/StartupLogin.conf
sed -i "s/FDN.*/FDN = $FDN/" ~/.novell/ncl/StartupLogin.conf
sed -i "s/Context.*/Context = $CONTEXT/" ~/.novell/ncl/StartupLogin.conf
sudo /bin/update_login.conf.sh $CONTEXT
fi # if [ ! ~/.novell/ncl/StartupLogin.conf.new ];
/bin/update_login.conf.sh has the following and has '%users ALL=(root) NOPASSWD:/bin/update_login.conf.sh' added to /etc/sudoers
Code:
if [ ! -z "$1" ];then
sed -i "s/Default_Context=.*/Default_Context=$1/" /etc/opt/novell/ncl/login.conf
fi
So far this is working well.
The novell login needs to be run once, and on the advanced tab, have the session saved. This then auto runs afterwards for each logon.
as a troubleshooting tool, I :
Code:
cp /etc/etc.1
rsync -avP etc* my-pc:/tmp/
i can then use krusader to compare files (on my-pc), but most importantly, after doing something (eg yast ldap). rerun the rsync line and and it will tell exactly which file(s) changed, so you know which ones to check/keep/alter/etc
hope this helps.
ph

Radius and the Novell Client

Is there any capability for the Novell Client to use radius authentication.
We're putting in Cisco Clean Access and we'd like a pass through
authentication. Clean Access already uses LDAP/eDirectory for
authentication. We're not crazy about using Secure Login as that has seen
more than afew issues for us.
Any ideas? Perhaps a BorderManager widget somewhere?

> Is there any capability for the Novell Client to use radius authentication.
>
And what has thid got to do with Queue-based printing?? ;)
Try the client forum.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

What query should I use to find all versions of Office 2013 64-bit installed on client computers?

What query should I use to find all versions of Office 2013 64-bit installed on client computers? Could someone create a custom query? I need all of the client computers names and which ones have any Office 64-bit components. Thank you so much! I really
appreciate it!

Hi,
You could edit the following query to meet your requirement.
SELECT     dbo.v_R_System.Name0, dbo.v_GS_OPERATING_SYSTEM.Caption0 AS [Operating System],
                      dbo.v_GS_OPERATING_SYSTEM.CSDVersion0 AS [OS Service Pack], arp.DisplayName0,
                      CASE WHEN arp.version0 LIKE '11.0.6361.0' THEN 'SP1' WHEN arp.version0 LIKE '11.0.7969.0' THEN 'SP2' WHEN arp.version0 LIKE '11.0.8173.0'
THEN 'SP3' WHEN
                       arp.version0 LIKE '12.0.6215.1000' THEN 'SP1' WHEN arp.version0 LIKE '12.0.6425.1000' THEN 'SP2' WHEN arp.version0 LIKE '14.0.6029.1000'
THEN 'SP1' ELSE '' END
                       AS 'Service Pack', arp.Version0
FROM         dbo.v_Add_Remove_Programs AS arp INNER JOIN
                      dbo.v_R_System ON arp.ResourceID = dbo.v_R_System.ResourceID INNER JOIN
                      dbo.v_RA_System_SMSInstalledSites AS ASSG ON dbo.v_R_System.ResourceID = ASSG.ResourceID INNER JOIN
                      dbo.v_GS_OPERATING_SYSTEM ON dbo.v_R_System.ResourceID = dbo.v_GS_OPERATING_SYSTEM.ResourceID
WHERE     (arp.DisplayName0 LIKE '%Microsoft Office%edition%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2007%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Standard 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Enterprise 2010%' OR
                      arp.DisplayName0 LIKE '%Microsoft Office Professional%2010%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office 2000%' OR
                      arp.DisplayName0 LIKE 'Microsoft Office XP%') AND (arp.DisplayName0 NOT LIKE '%update%') AND
                      (arp.DisplayName0 NOT LIKE '%Microsoft Office XP Web Components') AND (dbo.v_R_System.Operating_System_Name_and0 NOT LIKE '%server%')
AND
                      (arp.InstallDate0 NOT LIKE 'NULL')
ORDER BY dbo.v_R_System.Name0, arp.DisplayName0, arp.Version0
Full details:http://social.technet.microsoft.com/Forums/systemcenter/en-US/7baeb348-fb63-4115-8d76-2c884d18f708/sql-query-to-check-ms-office-service-pack-level?forum=configmgrreporting
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What software usual is used to create installation package for client appli

What software usual is used to create installation package for client application?

>
I mean the software that installed my application on client's machine. E.g. by click button Next, Next ...>Try clicking some of the 'buttons'(1) on the [webstart API examples|http://pscode.org/jws/api.html] page.
(1) They are not HTML buttons, but links stylde to look vaguely like buttons. HTML buttons can be used just as easily, see [Launch JNLP App - launch style|http://pscode.org/jws/launch.html] for an overview of different launch styles.

What is the Oracle 10g services in client-side use?

What is the Oracle 10g services in client-side use?--------No188

Hi,
Don't you think that including the question number tips-off people that this is course work?
Anyway, Google can be very helpful for finding answers to your Oracle questions. Check this out:
http://www.dba-oracle.com/t_google_keyword_searching.htm

What lite client installation i should to use for OraOLEDB.Oracle

I have code in VBScript and connection opens when i use oracle full installation, but when script is used on another client machine installation should be compact. What I should to use for it? I try ODAC xCopy but when i installed oledb with instant client i got "General run error" when script try to open connection. Also I registed manualy OraOleDB11.dll becouse it not registred by xcopy installation.
strCon = "Provider=OraOLEDB.Oracle; Data Source=(DESCRIPTION =(ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = 1521)))(CONNECT_DATA =(SERVICE_NAME = serviceName)));User Id=userID;Password=passID;"
Set objCon= CreateObject("ADODB.Connection")
objCon.Open strCon
msgbox objCon.State

There are two configsets by default. Configset 1 is
for synchronization and Configset 0 is used by
provisioning (again, these are default settings).
You cannot have two odisrv (Provisioning and Synch)
with the same instance #.
So, instance 1 could be Provisioning and instance 2
could be Synch.
Have you setup your synchronization mapping files?
I would suggest you use the DIPTester utility to
setup the synch. It might also be helpful to post the
commands and the odisrv* logs (not the full dump, but
the last snippet).Well I was trying to use ConfigSet 1 for synchronization but it either wouldn't let me because of how it is designed or I had screwed it up at that point since I didn't know what numbers to use for anything and it prevented me from using Set1 because of that. In the end I created a ConfigSet 2 and was able to get another instance of ODISRV running with that. That finally got the sync working on a scheduled basis. I'm now trying to get SSO working between OID and ADS and it seems that OID is too stupid to know that a user exists. I log onto the Windows PC into the domain and attempt to go to http://ssoServer.com:7778/pls/portal and login and I get an authorization denied message.
I have debugging turned on as much as I can and the defaultIsland log file (forget the full filename but its an OC4J file in $ORACLE_HOME\opmn\logs directory). It says that I was denied access because the user could not be found and yet I see the user in the directory tree and it comes back in a search as well. The krbprinicipalname, uid, and orclcommonprinicipalname (I think that's what it's called) are all the same ([email protected]) and the orclusersearchbase is set to dc=mycompany,dc=com so I don't know why the account can't be found.
ANy ideas on that issue?

Novell Client for Linux 2 beta & VMWare - bridged only?

OpenSUSE 11.1 with Novell Client for Linux 2.0 SP2 beta.
OpenSUSE is installed as a VMWare Workstation guest using NAT. When attempting to use contextless login, the Novell Client hangs. If you disable contextless login and then browse to the right context, you can login OK.
If you change the virtual NIC from NAT to Bridged, contextless login works fine. If at all possible, we need to use Bridged instead of NAT (long story).
Any idea what could be the problem? From what I can tell, SLP, DA, etc are set correctly, but I could be wrong.
Thanks.

Originally Posted by Thorsten Kampe
* mlazovjp (Mon, 14 Dec 2009 18:56:02 GMT)
> OpenSUSE 11.1 with Novell Client for Linux 2.0 SP2 beta.
>
> OpenSUSE is installed as a VMWare Workstation guest using NAT. When
> attempting to use contextless login, the Novell Client hangs. If you
> disable contextless login and then browse to the right context, you can
> login OK.
>
> If you change the virtual NIC from NAT to Bridged, contextless login
> works fine. If at all possible, we need to use Bridged instead of NAT
> (long story).
>
> Any idea what could be the problem? From what I can tell, SLP, DA, etc
> are set correctly, but I could be wrong.
Use NAT only if you need NAT - otherwise use bridged.
Thorsten
I was afraid that someone was goign to say something like that :)
We use port security hardware on our network, which will disable a port on the switch if it detects multiple MAC addresses on the same port. A virtual machine's bridged networking sets port security off and disables the port, so we have had to resort to NAT for all virtual machines. We can ask for exceptions to be made for a subset of our lab computers, but that is not an ideal solution.
Not only is that extra overhead for us to manage these exceptions, but we will not be able to realize our long-term goal of providing the virtual machine to our students to use on their personal notebooks since we cannot provide them port security exceptions.
I am still having problems grasping the reason that a contextless lookup (via LDAP, I assume) would misbehave while coming from a NATted connection but a bridged connection works fine on the exact same virtual machine. Shouldn't the communication between the VM and the LDAP server work properly either way??

Novell Client 2.0 SP1(IR6) - TID 7008266 - Service/eDir Auth

Shaun et. al.,
I like what I'm seeing in the Novell Client 2.0 SP1 (IR6) release notes.
Tree or Server Not Found on login immediately after powerup is supposedly fixed with this release (a big problem with us).
Can you confirm that TID 7008266 is part of Novell's solution to the issues posed by installing as a Dynamic Administrator / System Account?
(mapping drives, etc).
pitcherj

Well, I think the efforts are completely disconnected.
The Client2 Efforts are nothing to do with ZCM.
I'm aware of the Interactive Services Detection defect and this would
not relate to that in any way. Nor would the Dynamic Administrator
inherit any rights defined by the Client2 Feature.
In regards to the SYSTEM process, it may but I have not tested nor do I
believe anyone in the ZENworks group has done so. However, I think it
would stand a decent chance of working. Of course it would require the
use of a UNC Path, and not drive letters.
On 4/7/2011 12:36 PM, pitcherj wrote:
>
> Craig,
>
> I realize it's not DIRECTLY related to Dynamic Administrator, but I do
> have a SR in with Novell on this (the interactive services detection
> dialog, etc) and they said they were working on an alternate solution
> that would potentially allow users to see the UI of an installer.
>
> (Currently I have to make sure to start the ui0detect service since
> most of the time that service is not active on our user's workstations,
> so they have no way to view the progress of an installer other that the
> ZENwork progress bar)
>
> pitcherj
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Windows 7 with MDT - Novell Client / Zen Agent?

Been creating my Windows 7 reference image using Microsoft Deployment Toolkit (MDT - pretty cool). I'm wondering if any of you do the same, and if you do, do you include the Novell Client in the image? what about the zenworks agent? If so, what techniques are you using to install.. etc.
Thanks!

Originally Posted by joebrug
Been creating my Windows 7 reference image using Microsoft Deployment Toolkit (MDT - pretty cool). I'm wondering if any of you do the same, and if you do, do you include the Novell Client in the image? what about the zenworks agent? If so, what techniques are you using to install.. etc.
Thanks!
You can use this during your sysprep process that way it does not matter if it is installed or not.
zac fsg -d
:: THIS WILL ALLOW A NEW GUID TO BE CREATED IN ZEN AFTER REIMAGING
del "C:\Program Files (x86)\Novell\ZENworks\conf\deviceguid"
del "C:\Program Files (x86)\Novell\ZENworks\conf\devicedata"
del "C:\Program Files (x86)\Novell\ZENworks\conf\*.sav"
del "C:\Program Files (x86)\Novell\ZENworks\conf\Guid.txt"

Import Novell Client ADM to Zen 10

What is the secret to creating a Policy in Zenworks 10 that controls the Novell client? I do not see any place that I can import an ADM file and then create a policy using it.
Another question is will the client ADM file 4.9 work for the Vista 64 Novell client? If not, is or will there be one soon for Vista?
Thanks

There is demand...I hope at least. We are in the process of rolling our Vista 64 Business because of an CAD application, Revit, that just needs the extra resources. We held off as long as we could but were forced to move on. We have the Novell client loaded and all works fine, but we would just like to turn off some of the Novell options the client installs. We also had to upgrade to Zen 10 for the Vista support. If you do an update to the adm file, please let me know!
thanks.
Originally Posted by spond
Txrjohnson,
What Andrew said :)
> Another question is will the client ADM file 4.9 work for the Vista 64
> Novell client? If not, is or will there be one soon for Vista?
>
You could ask the author... oh wait, that's me - I hadn't planned to,
but I could try to find time if there was demand...
Shaun Pond

Automatically login zenworks without Novell client.

I want to setup a computer that will automatically login to windows and to
the ZENWorks agent (even if just to workstation) and then run the NAL as the
windows shell. Also, we did not want to have the Novell client installed on
the machine.
I have figured out how to get the shell to work, but I can't seem to get the
Zen agent to automatically logon to the workstation. I attempted to use the
steps in TID10094960, but the zenworks agent login still comes up. I haven't
yet put the windows credentials into the registry so that it can
automatically login, do I need to do that at the same time?
We're trying to make a machine that will only allow the programs to run that
are presented by the NAL window and for the computer to login automatically
to the point where the icons are displayed.
Any help would be appreciated.
Thanks..
Brian W.

so let me see if I got this right...
If I want to get applications I need to authenticate a user. So, if the
following are set then it should work.
1. Do not install Novell client.
2. Create a user in NDS that I can create a local user account for. Then I
set the workstation for automatic login to windows using the a local account
with the credentials for the NDS user.
3. Set the Zenworks agent for PASSIVE login (this is the default?) Can this
be changed somewhere if I already installed it, I read lower in the document
you posted that you need to uncheck a box in the installation, can I change
this option after the fact if I installed it wrong?
4. Setup NAL as the shell.
This will allow the any user of the workstation to use only the available
icons and will allow me as an administrator to distribute them using the
NAL.
Thanks for your help
BW
"Jared Jennings" <[email protected]> wrote in message
news:pan.2006.04.29.00.13.16.590037@SPAMmyrealbox. com...
> Brian W,
>
> Well, as long as the workstation is imported, it doesn't matter what user
> is authenticated at the worktation. The application objects should be
> displayed.
>
> Try setting the Zenworks agent authenticate to passive.
> Take a look at this piece of the docs.
> http://www.novell.com/documentation/...l.html#agt1hcc
>
> --
> Jared Jennings
> Data Technique, Inc.
> Novell Support Forums Sysop
> http://wiki.novell.com
>

Novell Client for Linux causes Excel/Crossover to lock on file open

When using Microsoft Office with Crossover, if I access a mounted NetWare
drive using Novell Client for Linux it causes the office Open dialog to lock.
The same action with an NCPFS mount works ok.
Of course I understand if having Office/Crossover working is not exactly a
priority but my company will need it if we are to migrate to NLD

Malt,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Trying to Deploy Novel Client 2 ADM

I am trying to use the Novell Client 2 ADM to limit what my users can do via the Novell Client (we are a public school district.) Specifically, I am trying to disable the Novell Utilities, the Browse To, and the Properties dialogs. When I used the ADM in my Group Policy, and applied it to my users, nothing changed. I then tried to create a bundle to push out the registry edits that would make the changes, I was able to see that the changes took effect, but they took effect on all users who logged in to the computer instead of just to the specific users I wanted.
I know that this is probably an easy fix, but I have been struggling over this for 2 weeks now, and I am no closer to a solution than I was before.
Thank you for any assistance you can provide me.

Billupp,
> I was able to see
> that the changes took effect, but they took effect on all users who
> logged in to the computer instead of just to the specific users I
> wanted.
They are global yes, so you must run the edit for every user that logs
in, always.
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

What Novell Client to use in SLED11?

Similar Messages

Maybe you are looking for