What O/S required...
Hi John,
I am having Windows 2003 SP2 operating system. Is Hyperion EPM 11.1.1 supported by this O/S?? Or I strictly need Windows 2003 SP1?
Thanks.
Hi John,
thank you again. Actually you know I installed everything aon Windows XP system and I worked properly. I even accessed shared services console and Essbase had no problem as well. But suddenly I am having this problem shared services. I get the whole thing from your reply that my O/S is the main issue. Means in XP there is no guarantee that if the EPM system runs today it certainly will run tomorrow.
Anyway, thank you.
Thanks.
Similar Messages
-
Change Individual Material - What are the required parameters?
All,
I've just started using ES Workplace to test out some of the packaged SAP services. I've been able to successfully use the "Find Material Basic Data by Elements" service to search for materials. But now I'm having trouble with the "Change Individual Material" service and getting it to do anything. Specifically, I can invoke the service from WS Navigator and it says that it executed successfully but the fields that I was attempting to chagne are not changed on the material.
So, I have two questions:
1.) Where is the documentation for each service which defines which fields are reqruied for the service method to execute successfully? I don't see it anywhere.
2.) For this service in particular, what fields are required for the service to execute? Say, for example, that I want to change the volume of a material. Which fields need to be populated?I can see some sample test data is also given there, please see link posted in previous post (but for ERP).
Regarding your question about so many fields required to update certain data then please remember these services are created to be very generic so you pass lot of data which you may not want to update but only change field which you want to update and it should work.
Same service you can use to update different attributes of Individual Material.
One more thing, you are reading data using material service and trying to update individual material, is it correct? i thought they are two different thing.
Regards,
Gourav -
Cant figure out how to install vcenter, or even what OS it requires, help!
Unfortunately, the excellent vsphere windows client has now been discontinued (or at least we assume it has because we get error message "you have restricted editing capabilities on a virtual machine of version 9...). So now we have to figure out how to get the web client.
We don't want to install vcenter, due to the unnecessary complexity and cost, but it looks like we have to.
Unfortunately, I cant find out how to install vcentre - I found a page with the prerequisites, but It didn't mention the most important piece of information - what OS it needs, nor how to actually install it from the iso.
We are using vmware essentials kit on a single host. We dont have any windows server licenses, so if vcenter requires this, vmware is out, unfortunately.
what OS is required for vcenter
is vcenter free?
Do we need vcenter or vcenter server, or are they the same?
how do we get it?
How do we install it?
How do we access the web panel?
Where is the documentation? We have spent some considerable time looking for it. The nearest is this page:VMware vSphere Documentation which is for vsphere, not vcenter, and only includes info about the vcenter appliance. On this page is a documentation link to the right, but vcenter is not included in the list of products - its like it doesn't exist.
Why do vmware make it so hard to use vsphere now? Why doesn't sphere simply come with vcenter, as it cant work without it now, or at least offer it as an option when installing vsphere. It must be a show stopper for many people like us who want to evaluate vmware to virtualise a hand full of non HA environments, but get stuck at this point.Just to clarify, vSphere is a suite of products that includes vCenter, ESXi (The hypervisor) and a whole range of other products.
There is a free version of the ESXi hypervisor but it is limited in features and you get basic management options, no vCenter server to manage multiple hosts so you can't use HA, vMotion, DRS etc etc
The reason for the lengthy installation documentation is that customers have a wide range of requirements, however most will probably opt for the "simple install" option!
Documentation wise, I prefer the HTML version which you can easily search / browse: vSphere 6.0 Documentation Center
1) vCenter requires Windows Server, however you can also use the Linux appliance, saving a windows license. This is much improved in recent years however is still missing some functionality such as Update Manager that some customers will use.
2) No, you need a license for vCenter, it manages your ESXi hosts and manages your virtual environment. See: Compare VMware vSphere Editions and Kits Comparison | United States
3) vCenter / vCenter server are the same thing
4) You need to purchase it, or use a free 60 day evaluation
5) As per the documentation above. The simple install is your best option to get it instaled in 30 minutes, or try the appliance version (Import it onto a host, boot and follow the instructions, database is included, very easy to deploy and no additional licensing costs)
6) Via https://vCenter-Hostname:9443
7) As above -
What are the required settings for Quality Certificate
Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
ThanksSettings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009 -
What step is required for open sap in browser (internet explorer)
Hi All,
What is configuration is required for open sap in internet explorer,
i want to open sap gui in browser, for that what customizing is
required?.
i have ecc 6.0.
Thanks & Regards
ArpitHello. This blog are for 640 release, but the main steps are same, activating in SICF , publishing in SE80 , check ICM, after test service in same SICF -->
sap/bc/gui/sap/its/WEBGUI.
Running your first ITS WebGUI application in SAP NetWeaver 04 ABAP Edition - NSP
Regards. -
After updating to OS X Mountain Lion, there is a password locked pdf document in the Downloads Stack. Does anyone know what password is required to access this file?
Hello, if your install disk is locked (I assume with FileVault) there is no way to change the password. If it weren't locked there were at least two solutions. As far as I know, the only solutions now are:
- contact your dad
- erase and reinstall the OS X clean
Let us know. -
hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishnaHi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM -
What cast is required to run this code ?
public class tempClass {
public static void main(String[] args) {
Object object = new Object();
double goodBoy[] = new double[10];
double badBoy[][] = new double[1][10];
goodBoy[0] = 1.0;
goodBoy[1] = 2.0;
goodBoy[2] = 3.0;
goodBoy[3] = 4.0;
goodBoy[4] = 5.0;
goodBoy[5] = 6.0;
goodBoy[6] = 7.0;
goodBoy[7] = 8.0;
goodBoy[8] = 9.0;
goodBoy[9] = 10.0;
object = goodBoy;
badBoy = object; //what cast is required here ?
System.out.println(badBoy[0][1]);
}you also might consider this, which seems like it might meet the original intent better:
public static void main(String[] args) {
double goodBoy[] = new double[10];
double badBoy[][] = new double[1][10];
goodBoy[0] = 1.0;
goodBoy[1] = 2.0;
goodBoy[2] = 3.0;
goodBoy[3] = 4.0;
goodBoy[4] = 5.0;
goodBoy[5] = 6.0;
goodBoy[6] = 7.0;
goodBoy[7] = 8.0;
goodBoy[8] = 9.0;
goodBoy[9] = 10.0;
badBoy[0] = goodBoy;
System.out.println(badBoy[0][1]);
} -
What config is required to set up Transportaion planning for the delivery?
Hi experts,
I am trying create shipment for delivery.It not picking the delivery for shipment.I checked the status in delivery and Transportaion planning is not showing as 'A'.What config is required to set up TP for the delivery?
Please adviseplease define your transportation planning point , shipment type
u can define ur transportation planning point in IMG- enterprise structure - Logistics execution
and shipment type u can define under IMG- Log Execution - shipment - define shipment types
Maintain ur delivery type etc relevant for transportation in
IMG- logistic execution- shipments-maintain transportation relevance
Pls do reward if this information is of helpful to you
regards
AMI -
What cable is required to tether from Iphone?
Hi there i will be receiving my Ipad next week and will be looking to tether my 3G signal from my Iphone. Can anyone confirm what cable is required so i can plug the Iphone into the Ipad and use the signal.
Thanks in advance.
AndyBesides the Bluetooth and the WiFi way described above, you can use USB, i e the cable that comes with your iPhone and connect it like if you were to sync with iTunes or something.
Then it does use the computers battery though. If you have a laptop which is not connected, that will "drain" a little bit from the computers battery. If you are connected to power then there is no "issues" what so ever.
Happy tethering!
"So i can tether my 3G signal on my Iphone 4 to my ipad when i am not in a wifi area correct?"
Indeed you can! But not with any cable as far as i know. Bluetooth or Wifi!
Message was edited by: Tobias Ahl with more CORRECT tethering answers
Message was edited by: Tobias Ahl Wo did not read it all! -
What hardware is required to activate application like Cisco Unity Connection ?
Please I need your help,
What hardware is required to activate application like Cisco Unity® Connection ?
Thank youIn addition to great reply (+5), basically this is similar to CUCM which you need to have in order to run Unity Connection (or you could have CME). So, if you have CUCM running it will be very similar concept. If this is new install you want to definitely go the virtual path.
HTH,
Chris -
What equipment is required to calibrate PXI cards.
I need to know what all is required, hardware and software wise, for me to calibrate the following NI items in my cal lab:
PXI-1045, PXI-6508, PXI-6552, PXI-8331, and PXI 6251.
What I have now is an old version 2.0 of Calibration Executive and the software that came with these cards (NI-488.2, GPIB-VXI/C Legacy Documentation and NI-VISA Libraries Version 3.0). My software guy also has the NI Developer Suite from 2003. In the lab we have calibrators (5700,5720,4708,9500) and meters (34401,3458,1281,8508) and scopes (TDS) and PC controllers running XP with NI PCI-GPIB cards.
I realize I will need to get an upgrade for the Cal Exec, I need to know what all else is required to decide if it is going to be justifiable to gear up for this capability. Any information, including prices, is appreciated.Hi Poornima -
The SCXI chassis and equipment are used to condition signals sent to and from the DUT. After being conditioned, the signals are sent to your DAQ device to be digitized and read into the computer. As such, the SCXI chassis only needs to be cabled to the DAQ device. You can do this using a shielded E-series cable (SH68-68-EP) and an adapter block (SCXI-1349). These will connect the leftmost device in your SCXI chassis to your DAQ card, which must reside in the rightmost slot of your PXI chassis. There is detailed information about SCXI connections in the "SCXI Quick Start Guide", which can be found in the Start Menu documentation for DAQ.
The GPIB connections will be made in your PXI chassis. Either the embedded controller of the chassis or a PXI-GPIB card will have the port connections needed.
There are also detailed text instructions for making the connections in the "Calibration Executive Help" file, which you can find in the program's Start menu group. Inside this file, browse the tree to "Device Calibration Procedures » Modular Instruments » High-Speed Digital". The instructions given here explain step-by-step how to connect your equipment for both scenarios (combo chassis and separate SCXI chassis).
David Staab, CLA
Staff Systems Engineer
National Instruments -
What steps are required to configure the Payroll Tax ( USA)?
Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.Khi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring -
What is setting required for Price Contol do the optional entery in master.
Hi SAP EXPERT,
What is setting required for Price Contol do the optional entery in Material master ?
Regards
Mahendra
Edited by: MAHENDRA NAVALE on Aug 27, 2011 2:23 PMHI
In general in the material master record you can, hide display or optional for a field, but there are certain feilds should be mandatory for material creation,like base unit of measure,material description,and price contro,l valuation price,valuation class,without this you cannot create a purchase order.
If you dont want to the price control means go for mateial type non valuated material NLAG. because the price control is mainly linked with the material valuation. based on the the price control the price difference will post either sock account or price difference account.
Goto>MM>LOGISTICS GENERAL>MATERIAL MASTER>FEILD SELECTION >ASSIGN FEILD SELECTION TO FEILD SELECTIN GROUPS(OMSR) >CHECK YOUR FEILD REFERENCE FOR PRICE CONTROL (MBEW-VPRSV) FEILD REFERNCE GROUP IS 32* > AND GOTO MAINTAIN FEILD REFERENCE FOR DATA SCREENS (OMS9) >ENTER YOUR FEILD SELECTIN GROUP 32 (PRICE CONTROL )AND CHOOSE MM01 MAKE IT FROM REQUIRED TO OPTIONAL.
Thanks
Edited by: Nijamudeen**MM on Aug 29, 2011 10:19 AM -
What is the required hardware to control AMC servo amplifier model 30A20AC?
Hi everybody,
What is the required hardware to control "Advanced Machine Controls" servo amplifier Series 30A-AC, model 30A20AC?
The interface hardware should connect to a laptop, and run in real-time.
Tnank youHi Nkhbeik,
I went to ni.com/motion >> choose NI Motion Hardware. I then filtered out the hardware that did not support Real-Time by clicking on Real-Time on the left hand side of the page. There are a number of results returned. Depending on how many axis you need, you can filter the results further. Any of the results can be used with the appropriate connector, either a cRIO chassis (for the 9505), a PXI Chassis (for PXI formfactor), or a PCI Extension device for a PCI card. I hope this helps!
Kristen H.
Message Edited by Kristen H. on 06-08-2009 01:22 PM -
What are the required things to do the debug?
hi Experts,
What are the required things to do the debug?
thanks in advance
sekharHi,
There are different ways to go in debugging mode.
One way is to go to the transaction and put /h + enter in the top blank space.
The other way is to but a breakpoint in your program.After you execute the program,it will stop at the breakpoint and go into debugging mode.
The thirdway is to write break-point in the code at a specific point.On execution it will stop at that point.
A fourth way is to write break (your user id).It will stop only for you and then you can debug it.
Hope it was useful.
Thanks,
Sandeep.
Maybe you are looking for
-
Ink system failed Error:Oxc18a0101 on photosmart D7160
Changed the ink cartridges and got Ink system failure. Unable to print. Error: Oxc18a0101 Printer not that old and not used that much. Turned power off then on again did not help. Unplugged power and USB also did not help. Looking for help!!!
-
Created a batch and scheduled the report from Workspace to run. Scheduled batch ran successful but the Email is not generated for the user though we have provided the valid email address. Is this is known issue?
-
How to download a file from a link within an AIR application ?
Dear friends, I have created a simple AIR app with Flex, where it basically navigates toa specific URL. It works fine, all the links, and so on... however, when I need to click a specific link to download a file (DOC, XLS, PDF) from it... it just do
-
I am using an iMac with OS 10.9.4, Mail 7.3. My mail trash file contains multiple copies of partially complete messages I've sent. This problem seemed to begin when I began using "Maverick".
-
During upgrade, will it keep all apps?
If I upgrade to Leopard do I need to reinstall all my applications including Parallels? I currently have Max OS X version 10.4.11.