What on Earth is this noise (pic & mp3 included)!!!

I just did an offline bounce of a string part and Logic has fired a nasty burst of noise in the middle of it. I've never ever seen this kind of behaviour on an offline bounce...?!
Pic: http://www.flickr.com/photos/76366061@N00/4080438540/
Audio: https://www.yousendit.com/download/TzY2QmtTeFUwZ2tLSkE9PQ *(WATCH YOUR SPEAKERS THIS IS LOUD!!! TURN DOWN!!!)*
After using Logic 9 on my G5 for a few days now, I'm starting to wander whether it's up to the task. Despite my initial thoughts, I think it is running slower and the CPU is definitely higher. Still, I can't explain this though. A little worrying.

Hi Christopher,
Well aside from the processor icon you also have one for ATI. You didn't happen to have have followed this thread by any chance?
Jrsy

Similar Messages

  • "Premiere PRo has encountered an error" What on earth is this.

    I made an edit and it gave me this and forced me to shut down.
    I restarted and tried again same thing.
    What is this?
    I updated the mac a couple days ago.
    WHAT ON EARTH IS THIS.
    I need to get back to work for a deadline/
    Please Help.
    Thanks in advance

    Sucks, don't it?  It's a not helpful error message.
    Sadly, rebooting your Mac often is required to get work done in Pr these days.  You could also try deleting your prefs, and searching for and quarantining corrupt media.
    I believe corrupt media or corrupt projects are the major source of crashes on the Mac side.
    And since you're on a Mac, run Disk Warrior and Repair Permissions after all OS upgrades and software installs.
    And when you're editing, set your Auto-Save frequency to a short interval, and increase the number of saved projects to 100 or so (I have mine set to 1000.), OR Increment and Save As often.  This might save you from losing entire projects to project file corruption, as has happened to me.  I have a thread similar to yours now because Pr won't open projects that have been corrupted.  I learned about multiple versions the hard way.

  • I got this message:" Software Update Update failed Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." What on earth is this about? I am not computer savy.

    I got this message:" Software Update Update failed Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." What on earth is this about? I am not computer savy.

    taken from https://support.mozilla.com/en-US/questions/826858:
    ''This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file all.js or firefox.js''
    ''Download a fresh Firefox copy and save the file to the desktop.
    Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html ''
    ''Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.''
    ''Do not remove personal data if you uninstall the current version.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.''
    ''Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.''
    ''If the problem persists See also:
    https://support.mozilla.com/en-US/questions/815130?page=2#answer-185385''
    Check and tell if its working.

  • What on earth is this new $30 upgrade fee?

    Talk about being nickel and dimed to death! They get us to sign up for 2 more years in exchange for the lower price on the phones. How on earth can they justify charging $30 for the "privilege"?  Shameful!

    You are free to do as you wish. You asked a question. I answered.
    I am a smart shopper and that is why I won't buy a used device from some random stranger on ebay. I will buy it from VZW or Best Buy where I know I will get a warranty against defects. You won't get a newer iPhone or Galaxy device for less than the price of a brand new subsidized once INCLUDING the $30 upgrade fee.
    iPhone
    http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313.TR11.TRC1.A0.H0.Xverizon+iphone+5s&_nkw=verizon+iphone+5s&_sa…
    Samsung GS4
    http://www.ebay.com/sch/i.html?_odkw=verizon+iphone+5s&_osacat=0&_from=R40&_trksid=p2045573.m570.l1311.R1.TR11.TRC1.A0.H…
    VZW had had Technicians in their stores prior to September of 2012. These employees provided 15 minute 1 on 1 sessions to learn the basics of your new phone. VZW started their workshops around August of 2012, 4 months after the upgrade fee was introduced. These workshops are attended by large numbers of groups.
    I also said that VZW is a for-profit organization but so is AT&T and Sprint and T-Mobile. They will all do what they need to to make money. Looks like VZW has found a way to maximize the services they provide to us while paying little out of pocket to do so while still charging us a fair price to obtain those service. That's what making a profit is.
    Sprint's customers are saying the same things you are:
    Sprint Community: Device Upgrade Fee
    Oh, look at that...so are AT&T's customers
    Charged for UPGRADE? - AT&T Community Support
    So where did you get the information that not every carrier is charging it. Only T-Mobile doesn't charge the upgrade fee and that is because they don't do contracts. They force you to buy the phone at full retail but they charge you a fee for being on the Jump program of $10 a month. http://www.t-mobile.com/phone-upgrade.html
    This does include insurance of $8 (they're forcing you to take it). That means $2 a month goes to be on their no contract. That's $36 per year. More than the $30 VZW want you to pay to take their 2 year contract or $15 a year.
    So I would say no, you haven't educated yourself and are obviously not aware that there are fees for almost everything. Oh wait. Except VZW Edge. No fee for program like T-Mobile and, like I said, you may qualify for incentives with VZW for being an Edge customer.

  • What on earth is this thing?

    The thing that came with my new nano. Its like a dock, but its only the top half. It looks like this:
    http://img153.imageshack.us/img153/3209/photo18pz6.jpg
    I'm so confused.

    not for the old dock, it is for the 'universal dock'...
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/2.RSLID?mco=E F6079DD&nplm=MA045G%2FA

  • What on earth do I do with this?

    Hi everyone-
    So, my computer keeps shutting down spontaneously on me. All of a sudden, my screen will fade to gray and I'll get a "you need to restart your computer" message with a big power button icon in the background. Here's what I get when I restart my computer:
    Interval Since Last Panic Report: 330719 sec
    Panics Since Last Report: 1
    Anonymous UUID: 52666B2F-6462-4963-AC8F-3CC6FC3C9077
    Mon Oct 26 07:08:23 2009
    panic(cpu 0 caller 0x2a6ac2): Kernel trap at 0x0181b835, type 14=page fault, registers:
    CR0: 0x80010033, CR2: 0x0690eba1, CR3: 0x3ef2c000, CR4: 0x000006e0
    EAX: 0x00009ef1, EBX: 0x00024959, ECX: 0x06904cb0, EDX: 0x06904c9c
    CR2: 0x0690eba1, EBP: 0x2a86b898, ESI: 0x00009f05, EDI: 0x06904cb0
    EFL: 0x00010202, EIP: 0x0181b835, CS: 0x00000008, DS: 0x06900010
    Error code: 0x00000002
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x2a86b6a8 : 0x21acfa (0x5ce650 0x2a86b6dc 0x223156 0x0)
    0x2a86b6f8 : 0x2a6ac2 (0x590a50 0x181b835 0xe 0x590c1a)
    0x2a86b7d8 : 0x29c968 (0x2a86b7f0 0x2a86b90c 0x2a86b898 0x181b835)
    0x2a86b7e8 : 0x181b835 (0xe 0x48 0x10 0x1810010)
    0x2a86b898 : 0x181884b (0x6904c9c 0x324a5336 0xe 0x56c0)
    0x2a86b958 : 0x1814742 (0x2a86b9ac 0x2a86b9b0 0x2a86b9b4 0x2a86b9a4)
    0x2a86b9d8 : 0x315fa1 (0x0 0x5bb8604 0x2 0x2a86ba3c)
    0x2a86ba58 : 0x32b403 (0x5bb8604 0x2 0x324a5300 0x86e5ea0)
    0x2a86ba88 : 0x34a20c (0x5bb8604 0x2 0x324a5300 0x86e5ea0)
    0x2a86bc08 : 0x35108e (0x324a5300 0x1 0x0 0x2a86bc54)
    0x2a86bc88 : 0x352994 (0x1 0x0 0x0 0x0)
    0x2a86bda8 : 0x357400 (0x8448abc 0x246 0x2a86bdf8 0x2115a9)
    0x2a86bdc8 : 0x35744a (0x6339ea0 0x1 0x2a86bde8 0x29f596)
    0x2a86bde8 : 0x4ab6f7 (0x8448848 0x2 0x400000 0x83ffd74)
    0x2a86be08 : 0x4ad69f (0x8448848 0x9 0x0 0x3541f6)
    0x2a86be68 : 0x4ad84e (0x8448848 0x1 0x3 0x20fd81)
    0x2a86be88 : 0x469be6 (0x8448848 0x2a86bed8 0x2a86bef8 0x216129)
    0x2a86bef8 : 0x46b9dc (0x5b3b380 0x83ffd40 0x6d782a0 0x0)
    0x2a86bf38 : 0x46baad (0x0 0x30 0x2a86bf5c 0x1)
    0x2a86bf78 : 0x4ed85f (0x6d782a0 0x5f4c648 0x86d62a4 0x0)
    Backtrace continues...
    Kernel Extensions in backtrace (with dependencies):
    com.cisco.nke.ipsec(2.0.1)@0x1812000->0x1880fff
    BSD process name corresponding to current thread: Safari
    Mac OS version:
    10B504
    Kernel version:
    Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
    System model name: MacBookPro4,1 (Mac-F42C89C8)
    System uptime in nanoseconds: 220715774567121
    unloaded kexts:
    com.apple.iokit.IOUSBMassStorageClass 2.5.0 (addr 0x2a86b000, size 0x45056) - last unloaded 185111427725247
    loaded kexts:
    com.cisco.nke.ipsec 2.0.1
    com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 184079603849386
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleHDA 1.7.4a1
    com.apple.driver.AppleIRController 161
    com.apple.kext.AppleSMCLMU 1.4.5d1
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AppleUpstreamUserClient 3.0.5
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.0
    com.apple.driver.AppleBacklight 170.0.2
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.AppleLPC 1.4.6
    com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
    com.apple.GeForce 6.0.2
    com.apple.driver.AppleUSBTCButtons 1.8.0b4
    com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
    com.apple.iokit.SCSITaskUserClient 2.5.1
    com.apple.iokit.IOAHCIBlockStorage 1.5.0
    com.apple.driver.AppleAHCIPort 2.0.0
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.iokit.AppleYukon2 3.1.14b1
    com.apple.driver.AirPortBrcm43xx 410.91.20
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.driver.AppleFWOHCI 4.3.4
    com.apple.driver.AppleHPET 1.4
    com.apple.driver.AppleIntelPIIXATA 2.5.0
    com.apple.driver.AppleUSBHub 3.7.8
    com.apple.driver.AppleUSBEHCI 3.7.5
    com.apple.driver.AppleUSBUHCI 3.7.5
    com.apple.driver.AppleEFINVRAM 1.3.0
    com.apple.driver.AppleRTC 1.3
    com.apple.driver.AppleACPIButtons 1.3
    com.apple.driver.AppleSMBIOS 1.4
    com.apple.driver.AppleACPIEC 1.3
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
    com.apple.security.sandbox 0
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.0.11
    com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
    com.apple.driver.DspFuncLib 1.7.4a1
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.iokit.IOSurface 73.0
    com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
    com.apple.iokit.IOSerialFamily 10.0.2
    com.apple.iokit.IOAudioFamily 1.7.0fc16
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.7.4a1
    com.apple.iokit.IOHDAFamily 1.7.4a1
    com.apple.iokit.AppleProfileFamily 40
    com.apple.driver.AppleSMC 3.0.1d2
    com.apple.driver.IOPlatformPluginFamily 3.4.0a20
    com.apple.nvidia.nv50hal 6.0.2
    com.apple.NVDAResman 6.0.2
    com.apple.iokit.IONDRVSupport 2.0
    com.apple.iokit.IOGraphicsFamily 2.0
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.2.1f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
    com.apple.iokit.IOBluetoothFamily 2.2.1f7
    com.apple.driver.AppleUSBMultitouch 200.20
    com.apple.iokit.IOUSBHIDDriver 3.7.5
    com.apple.driver.AppleUSBMergeNub 3.7.5
    com.apple.driver.AppleUSBComposite 3.7.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOATAPIProtocolTransport 2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
    com.apple.iokit.IOAHCIFamily 2.0.0
    com.apple.iokit.IO80211Family 300.20
    com.apple.iokit.IONetworkingFamily 1.8
    com.apple.iokit.IOFireWireFamily 4.1.7
    com.apple.iokit.IOATAFamily 2.5.0
    com.apple.iokit.IOUSBUserClient 3.7.5
    com.apple.iokit.IOUSBFamily 3.7.8
    com.apple.driver.AppleEFIRuntime 1.3.0
    com.apple.iokit.IOHIDFamily 1.6.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 281
    com.apple.iokit.IOStorageFamily 1.6
    com.apple.driver.AppleACPIPlatform 1.3
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.27f2
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.91.19)
    Bluetooth: Version 2.2.1f7, 2 service, 1 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS542520K9SA00, 186.31 GB
    Parallel ATA Device: MATSHITADVD-R UJ-867
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0230, 0x5d200000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    What on earth does this mean? It keeps happening and I'm worried something's really wrong with my poor computer.
    Thanks!

    This is a kernel panic, which indicates something is wrong inside your Mac (probably bad RAM). Read this document for steps to troubleshoot a kernel panic: http://www.thexlab.com/faqs/kernelpanics.html

  • HT5527 But what on earth can I use this storage for?

    I got the email this morning. It's somewhat annoying that I've just signed up for iTunes Match and will have to pay for that when I could have opted to just send my music to the cloud, which I thought was going to be reduced to 5gb.
    So I'd like to find out what I can use this free space for.
    When I had an iDisk I used it to store work files so they were easily available at work and at home. I also put treasured photos and documents for the family to see there. I often used it to store scores of music I've written to add another layer of security in case everything got lost this end in case we got struck by lightening or something. I'm not sure how much of that I'll be able to put in iCloud storage now.
    So far I'm using it for email and calendar and I'm using a very small amount of space. I've paid for iTunes Match, which is considerably bigger. Perhaps I could put my audio books in there? I'm still not going to use 55GB.
    The only real use I can see for it would be to email all my important documents such as the music notation scores to myself - and then I suppose I will have put them into the cloud. But if I'm going to lose it all in a year's time I'm not sure I want to go to all that trouble.
    Any other suggestions would be gratefully received.

    So really, they can offer us 55GB of space for a year, which seems a very generous offer given that they are not charging well over £100 as I used to pay for my maxed out iDisk. But there's probably not a single user who is going to fill 55GB with the kind of documents that can be stored there. Only photographs could fill that space; and even then it would take a massive amount of those to use up 55GB.
    And having found every last word processing document and photograph I can lay my hands on to fill the space, would it be worth it if I knew that at the end of the year I'd have to remove it all and back it all up somewhere else?
    One wonders why they bothered! It is no replacement for my iDisk. Now if we have a flood or a fire, I've lost the lot, no matter how much backing up I've done. Unless I turn to DropBox, that is. Maybe I will. What Apple has done is handed me a huge trunk and told me I can keep only unboxed cufflinks and earrings in it for a year, while I'm desperately looking around for somewhere to put my boots!
    Thanks for the comments, guys. I think you'll agree with me that this is a statement of bewildered disbelief rather than a problem and that there's no solution unless Apple changes the way iCloud works.

  • What's this noise?

    I was just working a game from dashbrd for about 45" and all of a sudden a major fan powered up and ran for 25 seconds & then faded out??
    what's up? this has never happened b4. i hope it is not signs of things to come!!

    I think that is overkill, especially if you use it a lot. I put mine to sleep every night, sleep 6 to 8 hours and wake it up or it wakes me up if I set the iTunes Alarm. (Which is a cool little app.) I have been doing that with my Macs for nigh unto 12 years, never had a repair, never had a breakdown.

  • What is up with this mysterious battery??

    So, I recently asked about a battery which is not charging.... it's plugged in, shows the charging symbol on the screen. I reset the SMC (or whatever) , and after two times, it worked and the battery charged like normal. But now, it's doing the same thing, and after reseting that thing at least 4 or 5 times over the last two days, still the battery is not getting charged. And this time there is a very, very faint green light on the charger. The light on the charger also is staying on even when it is unplugged from the computer.
    Strangely enough, the battery was at 14%. I unplugged it for about 15 seconds to look at the charger, and it went up to 16%. As soon as I plugged it back in, it went to 15%.
    It's really confusing.... the battery is in good quality (except that it's a little bit swollen). Any suggestions how to get it charging again? Apple store is not an option right now, at least for the next month.
    Actually, something bizarre just happened. In the time it took me to write this just now, all of a sudden the amber light goes on, and it shows that it is charging again like normal. Anyone have any idea WHAT ON EARTH is wrong with this battery???
    Here's the info (taken before it started to mysteriously charge again) :
    Battery Information:
      Model Information:
      Serial Number:       
      Manufacturer:          DP
      Device name:          ASMB016
      Pack Lot Code:          0002
      PCB Lot Code:          0000
      Firmware Version:          0110
      Hardware Revision:          0500
      Cell Revision:          0102
      Charge Information:
      Charge remaining (mAh):          680
      Fully charged:          No
      Charging:          No
      Full charge capacity (mAh):          4414
      Health Information:
      Cycle count:          247
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          -14
      Voltage (mV):          11229
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          70
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          70
      Automatic Restart On Power Loss:          No
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Wake On LAN:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          15
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake On AC Change:          No
      Wake On Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      Charging:          No

    Battery is 3 - 4 years old, as old as the computer is. I was doubting whether it was the battery or the charger, because the battery information says the battery is good.
    Also, thanks for that tip. I don't know anything about computers, I only started going on here when I had this battery problem and don't live near a store.

  • Encoding 320 kpbs vbr = 320? what's wrong with this picture

    Hi,
    I notice something peculiar about encoding with iTunes at 320 kbps vbr.
    When getting info in iTunes on the converted mp3 file, it shows as 320 kbps. What’s peculiar about this is, setting the bit rate to 320 means 320 is the highest possible rate - when needed. The more silent parts of the audio file are going to be less; therefore I should be getting an average number, say 276. This occured with a batch of different songs, so it's not the audio files.
    As a test, I also use BarbaBatch and do not have this problem. I encoded at 320, and ended up with 276.
    Is there a utility to do an analysis on the existing 320 files to determine what the actual encoding is? Perhaps iTunes doesn't correctly display the actual bit rate, but rather what my custom setting was. That would be consistent with itunes get info not even showing VBR in the get info window too.
    Thanks,
    Jeff
    G4, 1.4 GHZ, Mac OS X (10.3.9)

    Hi NoName,
    Thanks again. Okay, I looked at the properties and it’s the same as the status bar, 320 k. I appreciate your continued insight and effort and will have to defer trying to figure this out. Only because in the past month I went ahead and migrated much of my CD library onto disk using the iTunes custom settings.
    I was decisive about using VBR, rather then CBR, for compatibility reasons. BarbaBatch, if you’re not already aware has a robust conversion set offering both VBR and CBR. My decision was based on using 320 because it sounds warmer to me then 192 or 256 at times.
    I also decided to use iTunes for workflow purposes. With iTunes, all I have to do is insert the CD and wait for it to Eject. Not bad for ripping 200 CDs to disc. Knowing there are actually better converters out there, well they don’t ‘get track names’ and compile everything into organized folders, and eject the CD, like iTunes. So it was a workflow over quality conversion, which I’m still happy with. Contrary to common concerns, I’m not the least bit concerned about disc space. I would just purchase another Drive!. Also, I used VBR knowing it creates smaller file sizes and found anomalies when not using VBR on 320. At times I would get a compressed sound without VBR. So it worked to some advantage. I realize this is the point in our thread where things become subjective too. If I had a couple of terabyte discs, and was picky enough, I’d keep the audio files in their native 16 bit format.
    Back to the original concern, I’m just wondering if what I’m experiencing is normal, and it’s all about how iTunes creates tags. They’re just too general, not showing me what the ‘actual’ bit rate is.
    Thanks and good luck with your work over there. It’s sounds like we are both Mac and PC’s users, so your recommendation about foobar is helpful and when I get more time I’ll obtain some of the other plugins that might be helpful in analyzing the files.
    Jeff
    G4, 1.4 GHZ, Mac OS X (10.3.9)

  • What keeps making the cyclical noise while in sleep.  Sounds like iMac is loading a graphic or different screen.

    What keeps making the cyclical noise while in sleep?  Sounds like iMac is loading a graphic or different screen.  Does it periodically while in sleep mode.  How do I correct this?  Just started doing it in the last few months.

    I finally figured out how to fix this.  First I reviewed "Mac OS X: Why your Mac might not sleep of stay in sleep mode."  I noted the bullet:  "Do you have any other external USB or Firewire devices connected?"  I have an CP685AVR for a UPS for my Mac.  I replaced the battery a few months ago.  I also hooked up Apple's 'Energy Saver' power management software to the CP685AVR using the USB connection.  I disconnected it, and that solved the problem.  I still have the UPS and battery back-up; I just can't "monitor" the battery.  What's to monitor?  It always said the battery was 100% charged even right up to the time the previous battery failed.  Thanks for listening, uh... reading.

  • What on earth is going on with my connection?!

    So, Infinity installed and activated on Tuesday (18/10). OR Engineer informed me I was the first to have infinity installed on the Peterborough Central (01733) exchange so whether this has contributed to the problems I am experiencing and about to enlighten you with I do not know but anyway..........
    Day 1 - Installation went a treat. Engineer arrived at 2pm and was gone within the hour. Took my first BT Speedtester test @ 4pm and results were as follows:
    Date                            Download       IP Profile                   Upload            IP Profile
    18/10/2011 16:00       34025 Kbps     38718 Kbps                 7757 Kbps       10000 Kbps
    Internet was used up to around 11pm without any problems before I called it a night.
    Day 2 - Woke up in the morning, turned on PC, opened IE9 and could not browse any pages. Just a blank screen with the little loading icon spinning in the tab at the top of the page. Thought nothing of it, went to work, came home around 7pm, turned on PC, opened IE9 and same again. Could not browse one single page. Phoned BT India, explained all the lights on my HH3/modem were working as they should and both my PC and Hub manager confirmed I was connected to the Internet. We proceeded to reset IE9, done a factory reset on the HH3, even tried my laptop (both wired and wirelsss) to see whether I could browse any pages but none of this worked. India said they would do further checks that night and call me back by 9.30pm. They never did, I accepted defeat and went to bed.
    Day 3 - Woke up around 4am, decided to try IE9 and heaven above, I was able to browse the internet again! Went back to bed, got up, went to work, came home in the evening, turned on PC, opened IE9 and again all was great!!  BT Speedtester tests taken that day were as follows:
    Date                            Download       IP Profile                   Upload            IP Profile
    20/10/2011 04:30       34550 Kbps     38718 Kbps                 8253 Kbps       10000 Kbps
    20/10/2011 19:05       26370 Kbps     38718 Kbps                 8010 Kbps       10000 Kbps
    Day 4 (yesterday) - Turned on PC for first time at around 4:15pm and for the first 3 hours all was great. Then the **** hit the fan again and all of a sudden, whilst pages were loading, they were literally taking minutes. Some simply wouldn't load at all! Phoned India again, was informed I had a fault on my line and an engineer would contact me. BT Speedtester tests taken that day were as follows:
    Date                            Download       IP Profile                   Upload            IP Profile
    21/10/2011 16:40       14462 Kbps     38718 Kbps                 4469 Kbps       10000 Kbps
    *21/10/2011 21:40      579 Kbps        38718 Kbps                 2871 Kbps       10000 Kbps
    *Test taken in the midst of all the troubles.
    Day 5 (today) - OR Engineer arrived at around 8.30am without prior notice. He does a line test and all was ok. He had a text message on his mobile that said I should be receiving the full 40mb down / 10mb up. I turned on PC, opened IE9 and surprise surprise all was working as it should again. Because of this, the OR did not conduct any further checks, said 'if it ain't broken don't fix it' and left! All seemed good until 3.30pm when pages were again becoming painfully slow. I again phoned India who said they'll send another engineer out to me in the morning.  Anyhow, this continued until 11.30pm (40 mins ago as I write this) when everything started to work as it should again!?! BT Speedtester tests taken today were as follows (I could not take any other tests in between as the internet was simply too slow to cope):
    Date                            Download       IP Profile                   Upload            IP Profile
    22/10/2011 09:30       35671 Kbps     38718 Kbps                 8136 Kbps       10000 Kbps
    22/10/2011 12:15       35816 Kbps     38718 Kbps                 2168 Kbps       10000 Kbps
    22/10/2011 15:15       33660 Kbps     38718 Kbps                 8185 Kbps       10000 Kbps
    22/10/2011 23:35       35565 Kbps     38718 Kbps                 8228 Kbps       10000 Kbps
    So what on earth is going on here?! I know it's not the PC, I don't believe it's the equipment (hardware or software).  It's like someone turns a switch on and off as and when they'd like my broadband to work?! I have practically sat at the PC for 8 straight hours trying to load pages to no avail (or at least taking far too long to load) then suddenly out of nowhere, it starts to work as normal again?!
    If it's working in the morning when the engineer arrives what's he going to do? Absolutely nothing! I don't need to be Einstein to know that come the afternoon it'll go down again!
    Has any of you ever experienced anything like this?  Please say you have and if so how on earth did you rectify it (assuming you have)?!
    Any advice/help would be gratefully received.
    Many thanks.
    Paul
    You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010

    Really pleased to hear that mate, even if it isn't really the outcome you wanted.
    Of course it could well be either the HH3, hub or both. Personally, I don't think it is as like I mentioned in my opening post, it's like somebody switches a button on and off as and when they want me to use broadband. Take yesterday for example, from 8.30am-3.30pm the internet was working perfectly. From 3.30pm-11.30pm, I struggled to do any browsing as pages were that slow. From 11.30pm onwards and as I write this at 7.30am, it's working perfectly again.  And I bet you now at some stage this afternoon, it will practically come to a complete standstill again.
    Engineer arriving between 8am-1pm but if it all looks good, what can he do?! I need them to be here when it's not working properly. Given I'm in the 10 day training period, I've tried to use the internet as much as possible as suggested. Perhaps in my case this is having a reverse effect and slowing me down or throttling me instead?!  It has to be something between the exchange and cabinet or a fault at both as the only things that have changed my end are 1. The face plate to the master socket, 2. the HH3, 3. the modem and 4. the cables attached to both and given one minute my broadbans is fine and the next it practically stalls, I think the issue rules out any hardware/software fault.
    But maybe chasing this equipment is worth a try?
    You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010

  • What on Earth??? iTunes won't start

    I have installed iTunes on my computer (running XP service pack 2) and get the following error
    iTunes has encountered a problem and needs to close. We are sorry for the inconvenience
    Then it doesn't do anything else - just the 'do you want to send a report' thing. What on earth is going on?

    I'm having the same problem. I have reinstalled both iTunes and Quicktime and iTunes still won't run. When I go into Quicktime and click on the Audio Tab I get the following:
    Buffer Overrun Detected
    C:\windows\system32\rundll32.exe
    A buffer overrun has been detectd which has corrupted the program's internal state. The program cannot safely continue execution and must now be terminated.
    Any idea on how to fix this problem?

  • What on earth is the "click me" lego man on the home page and why doesn't it do something when I click?

    What on earth is the "click me" lego man on the home page and why doesn't it do something when I click?

    The Click Me logo is part of the Humble Mozilla Bundle promotion - once clicked you should be able to control the character with the "WASD", and "IJKL" keys.
    Quoting '''the-edmeister''' from https://support.mozilla.org/en-US/questions/1025706
    That Click Me game is part of the Humble Mozilla Bundle promotion on the default Home Page [about:home], that loads from the Mozilla servers in the "Brand Logo" (DIV) section of about:home. A feature that was first used in Firefox 29 [IIRC] just prior to the start of the Olympic Games.
    Also, part of that promotion is addressed in the "Snippet" below the Search Container on the about:home page.
    If you want to block the "Brand Logo" section (and the "snippet" below the Search container) from ever being seen again, you can install Stylish and this UserStyle. https://userstyles.org/styles/104673/about-home-hide-snippets-and-hide-brand-logo

  • OMG! ..what on Earth is going on with Version?

    OMG!!! ...I've never experienced anything like this in my 49 yrs dealing with customer service.
    I will try and make this as quick and least painful to read.
    First, I'm a recently returning customer after leaving Verizon for over ten years.
    My wife works from home so I needed the caller ID to reflect her name not mine so she called to have it changed. What Verizon did was cut my services for a full day to transfer the account to her name. Why they had to go this route to simply change the caller ID name is beyond me. Anyway, we got our services back and were happy to put that frustration behind us.
    Little did I know this was just the start of the worst business dealing with a service provider in my life. Apparently there was a small balance of $51.43 left in the old account. I paid that balance in full. However, that balance was transferred to my new account despite it being paid.
    Guess what? ...they cut my services because of that same $51.43. Okay, at this point I'm a little angry but sure that once I point out the billing error this problem would go away. After spending 45 minutes on the phone with billing they told me they transffered the paid balance from the old account to the new account and all should be good.
    Guess what? ...they cut my services again because of the same $51.43. (right in the middle of watching a Verizon rented movie) At this point, I'm beyond a little frustrated . I had to pay the same $51.43 to get my services restored until I could call during business hours. After another 45 minutes on the phone with billing, they refunded my $51.43 and assured me this issue would go away.
    Guess what? ...they add the same $51.43 back on to my bill and start sending me past due notices.
    At this point, I'm ready to through in the towel and switch services. I contacted billing again and asked to speak to a supervisor. After being on hold for 20 minutes, I spoke to a supervisor named Ashley. She was very nasty and did not care two cents about my issues and said I needed to speak to the accounting department. She put me back on hold and when I got to the accounting department she said I had to resolve the issue with the billing department. Are you kidding me???
    When I refused to be transferred back to billing she said that she would have her supervisor contact me. I'm not holding my breath that they will call me back. 
    What am I to do? Will this issue ever go away? How can a service provider be so horrible to deal with, and why can't they fix such a simple error?
    I have recorded every single phone conversation with customer service. If they don't get back with me and resolve this issue once and for all I will be switching services.
    Again ...OMG!!! ...what on Earth is going on with Verison and their customer service? 
    -Manny

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

Maybe you are looking for

  • Java no longer works

    i am using "stable" archlinux (not using testing) and in past few days there has been a lot of upgrades in core,extra,community (xorg server, intel drivers, hal etc....) but today i've realized i can't run any java application anymore ...i am using j

  • URL longer than it needs to be.

    I've created a web site, www.shadyhollowstingrays.com.  The name of the site in iWeb is Shady Hollow Stingrays.  For some reason iWeb has created a folder at the root of my site called shady_hollow_stingrays so now every URL is longer than it needs t

  • Portal: Password reset and unlock User via UME?

    I'm new to Portal and SAP.  I'm trying to find options to have a username unlocked and password sent to user based on a userid from our Portal logon page. The end user needs only to know their user ID, and based on this user ID I need their username

  • Deleting network conection from airport inabled Imac

    I'm tying to figure out how I can completely remove a network connection(s) from my Intel based mac. I've done the configure thing and deleted that part but it still shows up when I turn on the airport. If you go into the network location for airport

  • Uninstalled Akarmai Download Mangerer, how do i get it back?

    I accidentally uninstalled it when cleaning out my computer. I realized this when I tried downloading/installing Premiere Elements. When I did that, it only saved its folders in 7zip format, and I can't use the program. How do i get back Akarmai so i