What .ora file is required for client?

what .ora file is required on client side in order to connect to oracle database server? can we connect to db server without any .ora file? such as tnsname.ora, or even sqlnet.ora, etc.

That depends on a variety of factors, among them
- What version of the Oracle client you are using
- What tool you are using to connect
- How complex your database environment is
- Whether you are using local naming or are using something like Oracle Internet Directory
A basic install of the 11g thick client, for example, creates a sqlnet.ora file for you that enables the EZConnect syntax. Assuming your tool supports EZConnect, and your database configurations are simple enough to be able to use the EZConnect syntax, no additional configuration would be required. If you are using a tool to connect to Oracle that uses the thin JDBC driver, you need no client-side configuration-- your tool will prompt you for a JDBC URL (or information to generate a JDBC URL) that connects to the database.
On the other hand, in most cases, you generally want to configure a tnsnames.ora file on the client.
Justin

Similar Messages

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • ...recommended system & hardware requirements for clients P6 8.2 Clien&Webs

    What are the recommended system & hardware requirements for clients P6 Professional and Client Web for P6 8.2 ???
    I need to know the recommended systems & hardware requirements for clients P6 Professional and Client Web for P6 8.2
    I mean what kind of processor, memory ram minimum and maximus to run or to deploy P6 Professional Client from P6 8.2 version and the requeriments to run the P6 8.2 Web application.
    I need like a chart (not necesary) with the most common configuration with hardware and software like the example below
         SO     Ram     Hdd     Processor
    P6 Professional 8,2     Windows Xp Sp3     4 Gb     2 Gb +     Core2Duo 1,8 +
         Oracle Linux     4 Gb     3 Gb     Core2Duo 1,6 +
    P6 Web 8,2     Windows Xp Sp3     4 Gb     2 Gb +     Core2Duo 1,8 +
         Oracle Linux     4 Gb     3 Gb     Core2Duo 1,6 +
    Because all information I saw it´s about Server (Database, Server Application and others) and not very clever about P6 8.2 Client and P6 8.2 Web.

    I haven't seen PC requirements for a Win workstation per se either. Here are the only 8.2 client requirements I can find.
    Supported Configurations for Client Modules
    For Clients Accessing P6
     Microsoft Internet Explorer (IE) 8, IE 9, Firefox 8+, Safari 5.1.x+, Chrome 15+
     Sun JRE (the required version will install automatically with P6); Always install the latest supported patch update with security fixes
     TCP/IP network protocol
    For Clients Accessing P6 Progress Reporter
     IE 8, IE 9, Firefox 8+, Safari 5.1.x+, Chrome 15+
     Sun JRE (the required version will install automatically with P6 Progress Reporter);
    Always install the latest supported patch update with security fixes
     TCP/IP network protocol
     Optional software:
     Java Access Bridge 2.01 (for 508 accessibility)
     P6 Progress Reporter has been tested with the following technologies:
     JAWS® for Windows screen reading software, version 7.0
     ZoomText Magnifier 9.0
    For Database Clients Running P6 Professional
     Database client release 11.1.0.7.0 is supported for Oracle 10gR2, Oracle 11gR1
    databases and 11.2.0.2.0 for Oracle 11gR2 (required only for Oracle databases and
    supports only the 32-bit version).
     TCP/IP network protocol

  • What are the Things required for BI 7.0 Implementation project

    Hi Friends,
                      Can any one suggest me
    1.What are the Things required for BI 7.0 Implementation project?
    2.System Configurations & Hardware Components?
    3. Any additional steps...
    plz suggest me.
    Regards

    Hi lakshmi,
    http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    https://wiki.sdn.sap.com/wiki/x/JYk
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • What are the infotypes required for maintaining benefits....

    Hi
    Please help ...
    What are the ingotypes required for maintaing benefits....

    Hi Srikanth,
    Please find below the list of Infotypes required for maintaining benefits:
    1. General Benefits Information (Infotype 0171)
    2. Adjustment Reasons (Infotype 0378)   
    3. Health Plans (Infotype 0167)  
    4. Insurance Plans (Infotype 0168)  
    5. Savings Plans (Infotype 0169)  
    6. Flexible Spending Account (Infotype 0170)  
    7. Miscellaneous Plans (Infotype 0377)  
    8. Family/Related Person (Infotype 0021)
    There are also other benefits infotypes e.g. Stock Purchase Plans (Infotype 0379), Credit Plans (Infotype 0236) and many COBRA and retirement plan infotypes but these are used based on the company requirement.
    I hope this helps.
    Regards,
    Anand Jalan
    Edited by: Anand Jalan on Jan 6, 2010 9:50 PM
    Edited by: Anand Jalan on Jan 6, 2010 9:52 PM

  • What are the jars required for prepare portlet tool?

    what are the jars required for prepare portlet tool which converts portlets to .portlet.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the roles required for MSS

    What are the roles required for MSS in R/3.
    I have created ESS roles. But need to find for MSS.
    I am able to see the PERNR in ESS on portal which created in R/3.
    I need to get my staff on portal.
    What config is required for this.
    MSS User.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What all the prerequisites required for Combined Delivery &Invoice Process

    Dear Guru's
    Can you please educate me what all the prerequisites required for Combined Delivery Process(VL10A / VL10C) and Combined Invoice Process?
    Regards,
    Varma

    Hi ,
    For combined delivery you have to make some settings
    In the customer master XD01/VD01 in the shipping tab you have to check the ORDER COMBINATION  in the SHIPPING TAB
    In the COPY CONTROLS from Order to Delivery in VTAL at the Header you have to maintain the COMBINATION REQUIREMENT  as 051
    And also the data like
    INCO TERMS,
    SHIP TO PARTY
    DELIVERY DATE
    ROUTE
    SHIPPING POINT
    should be same for all the Orders
    To combine the Deliveries into Invoice
    you have to maintain the copy controls from DELIVERY TO BILLING in VTFL at the item level as 003
    And also certain data like
    PAYMENT TERMS
    PAYER
    BILLING DATE
    ACTUAL GI DATE
    INCO TERMS
    should be same for all the deliveries
    Please revert if you need any more
    regards,
    santosh

  • What are the system requirements for iMac for Photoshop CS6?

    What are the system requirements for iMac for Photoshop CS6?
    Just installed it and get a message saying it doesn't work on "this type of Mac".
    I have an iMac a few years old.....and Dual Core.

    System requirements | Photoshop

  • What SAP modules are required for insuance sector

    what SAP modules are required for insuance sector

    Hi,
    Following authorizations are required to be able to use all the functions of Support Package Manager:
    S_CTS_ADMI
    S_TRANSPRT
    Additional objects required and which can be used to restrict further the functionality are:
    S_C_FUNCT
    S_CTS_ADMI
    S_DATASET
    S_GUI
    S_RFC
    As available in the SAP help,standard SAP S_A.SYSTEM contains all necessary access for importing support packages.
    Regards,
    Nagendran

  • What authorization object is required for MIME repository objects?

    Hello
    Can someone tell me what authorization object is required for displaying MIME repository objects?
    Thanks,
    József.

    Hi,
    This thread may help you.
    Re: Authorizations for stylesheets/MIME?
    Thanks,
    JituK

  • What are the network requirements for the Remote Panel Server?

    What are the network requirements for the Remote Panel Server?
    I've been trying for a while now to setup a Remote Panel.  I can connect to my computers remote panel from other computers on my LAN but nowhere else.  
    When ever I use the web publishing tool it gives me a URL in this format:  http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
    When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
    "Connecting to remote panel server...
    Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi.  Is there some network or firewall setting I'm not seting?  Could it be my server or router or private network?
    My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet.  Is that even passable?
    Solved!
    Go to Solution.

    Over_Nyquest
    Have you enabled the Remote Panel Server in the Web Server options on the server?
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • What are the specific requirements for scalability?

    Hi
    what are the specific requirements for scalability?
    for a share point  internet portal
    adil

    Hi  Adil,
    According to your description, my understanding is that you need to know about SharePoint Scalability.
    For your issue, please have a look at the blog:
    http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
    https://www.linkedin.com/today/post/article/20140610232851-17468776-scalability-planning-in-your-sharepoint-2013-office-365-roadmap
    http://www.slideshare.net/garthluke/effective-sharepoint-scalability-management-to-blob-or-not-to-blob-thats-the-question
    http://download.microsoft.com/download/7/F/0/7F069D0B-B6BD-4692-868B-E8555BB72445/LargeScaleDocRepositoryCapacityPlanningDoc.docx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

Maybe you are looking for