What order do I reinstall drivers, hardware, and software?

I have had to reinstall Windows 7 on my Pavilion dv6-6c13cl. I would like to know what order do I reinstall the drivers, software and hardware?
I tried to reinstall yesterday and I couldn't reestablish an internet connection with Wifi. Your help would be greatly appreciated.
Thank you,
HH1238
This question was solved.
View Solution.

Hi:
The only drivers you need to be concerned with installing in a particular order are:
1. Install the AMD chipset driver and reboot.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
2. Install the graphics driver and reboot.
3. Install the audio driver and reboot.
4. Install the ethernet driver.
Then you can install whatever drivers you need and then install whatever software you want.
Wireless card:
The parts list indicates your notebook has a Realtek 8188GN PCIe Half MiniCard (HMC) WiFi adapter - 802.11b/g/n 1x1.
This would be the driver you need for that device.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105197-1&cc=us&dlc=en&lc=en...

Similar Messages

What is the best setup (cords, hardware and software) for converting tape cassettes to mp3 using iMac?

I have a huge collection of tape cassettes that I want in my iTunes library. I want to know what the best cords, hardware (type of Tape cassette player/recorder) and software to use.

It depends on what kind of inputs your Mac has:
If your iMac is a 2012 or older model it probably has an audio line input, in which case you can directly connect your tape deck outputs to your iMac. Generally this requires a cable with 2x RCA male connectors on one end and 1x 1/8" (3.5mm) stereo male connector on the other end.
If you have a more recent iMac that does not have a line input you will need to get a USB audio interface like a Focusrite Forte, but in these cases you will need to pay attention to the kind of cable inputs the USB device has.
In both cases you will need recording software. There are many choices. I have used Sound Studio with great success for tapes, vinyl and live recordings. (Note: if you are using a USB audio interface it may come with its own recording software.)
Pay attention to whether or not your tapes were recorded with or without Dolby B or C noise reduction; and also whether or not your tape deck supports none, Dolby B or Dolby C - getting each tape matched with your deck settings makes a big difference in the results. And depending on how quality conscious you are you may also want or need some noise reduction software, in which case I suggest looking at Wave Arts MR Noise, SoundSoap or Audacity.
You might also consider just purchasing selected CDs instead of investing in all the work required to set up, record, edit & clean up recordings from some of your old tapes.

MSSP:What is needed in terms of hardware and software?

What is the best state of the art infrastructure needed for an MSSP and what should I pay for services?

In fact having checked out a number of videos on Lynda.com, Illustrator is what I want. It was never about html - that already forms part of what I am already doing. As to mailchimp - I know all about that and don't like it and don't need it - the method I currently use from Dreamweaver to email works great.
The question was always about graphics and text for the web and a desire to have the same layout and quality as InDesign - I probably just didn't ask the right question.
Thanks as always.

What is the latest information about hardware and ...

Hello everyone,
Please tell me, What is the latest information about hardware and software upgrade...?

That would be the Mac Pro 4,1 model released in 2009. I would add that if you are buying one, that model is superior to the previous 2008 model and allows much larger and cheaper memories.
Mac Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
Mac Pro (Mid 2012)
Jun 2012
10.7.3
10.8, 10.8.3
11D2001, 12A269, 12D78
Mac Pro (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3
10F2521, 10F2554, 11A511a, 11C74, 11D2001
Mac Pro with Mac OS X Server (Mid 2010)
Aug 2010
10.6.4
10.7, 10.7.2, 10.7.3 (Server)
10F2522, 11A511a, 11C74, 11D2001 (Server)
Mac Pro (Early 2009)
Mar 2009
10.5.6
10.6
9G3553, 10A432
Mac Pro (Early 2008)
Jan 2008
10.5.1
10.5.2, 10.5.4
9B2117, 9C2031, 9E25
Mac Pro
Aug 2006
10.4.7
10.4.8, 10.4.9, 10.4.10, 10.5
8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

What hardware and software is needed to use share point 2010

Please if enyone could help!
I want to become familiar with the advantages of using excel for example simultaneusly with other users, shere point does it best for us yes??? What do I need to install or what hardware is needed to do that?
Thanks,

Here are the hardware and software requirements for SharePoint
http://technet.microsoft.com/en-us/library/cc262485(v=office.14).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Update hardware and software Qosmio G30-198 for hight performance

Good morning,
I have a Qosmio G30-198.
I Have to use Autodesk Civil 3D program in the laptop.
It is a CAD program that requires a lot of ram and a high speed data transmission with the HDD's.
For this, it is absolutely necessary to update hardware and software for to use Civil with good performance.
I need to buy and install SSD HDD, install more RAM (what is the maximum allowed in this computer?) and I need to install Win 7 Professional 64 bit.
Please,
if someone can tell me how I can further improve performance of the laptop, please tell me.
I do not know what steps I have to keep.
Can you help me?
Thank you so much.

>.. what a disappointment
Why? How old is your notebook? At this time 4GB was the same when you use 8GB today.
We have mobile machines with limited upgrade possibilities.
> It is better to install hardware or soft ware? (Win 7 Proffesional)
To be honest I dont understand this question. You should upgrade RAM to the maximum level and install Win7. Im pretty sure it will work well on this old Qosmio.
If you need your notebook for some specific operations like usage of Autodesk Civil 3D program you dont even need all drivers or specific Toshiba stuff. the main thing is you have most important drivers, tools and utilities.
> I read in a post that it is necessary to change the video driver and install a diferent that the original one.
Fact is that Toshiba recommends usage of own drivers only. Toshiba offers tested and adapted drivers for usage on mobile machines. These different drivers can help notebook owner to have better graphic performance and this new driver will force graphic card to offer more power but at the same time you must understand that more performance results with more heat. Due to specific design it is very risky for notebooks.
Have you ever cleaned up your notebook? I can imagine it is pretty much dust inside.
> Do you think if I install G50 driver it will work in my G30?
Unfortunately I cannot comment this. Just be careful with this.

Is the Hardware and Software enough/good for my needs

I've been reading these forums and a few others and am concerned about somethings and hope some of you can help with these concerns:
Some background and info:
1. I've ordered a Dell XPS 720 H2C which as a Intel Core2 Extreme processor QX6700 (3.46GHz,,Overclocked) w/Quad Core Technology and 8MBcache, 4 GB RAM, Dual 768MB NVIDIA GeForce 8800GTX, 1.5TB RAID 0 HDD and a secondary 500GB SATA 3GB/s (No option for a RAID 0 secondary HDD, Windows VISTA ultimate OS.
2. Will be buying/upgarding the Production Premium CS3 package. (currently only use PhotoShop CS3 and Flash CS3).
3. I have a Canon XH A1 prosumer video camera (I'm an amature photographer/videographer not a professional. Software is my forte).
My questions at this moment are to do with hardware software capabilties and workflow.
My first project (of many I hope) is a make some corporate videos in HDV format for online marketing purposes (kind of like the videos Adobe have for CS3 - http://www.adobe.com/creativelicense/) and possibly to produce DVDs of the same.
My first question is; Given the hardware and software, will I be able to do what I need? I really hope I don't have to go buy any more hardware. I don't mind having to do one or two more steps. to achieve the end goal (initially).
Starting with the mode to shoot in (for the purpose stated above), what is my workflow going to be?
i. What is the best mode to shoot in? (24f, 30f, 60i)
ii. How do I get the video from the MiniDV tape onto my HDD and then into Premier Pro.
iii. I need to be able to compisite multiple HDV clips to produce the final cut. Is the hardware and software good for this? On a scale of 1 to 10, what can I expect in terms of productivity.
I've heard elsewhere that Premier Pro just don't produce true HD quality results. Is this earlier versions.
What format/compression and dimension is the best for online viewing (I want to retain the HD quaility as far as possible.)
Thank you all for listening and hope to hear your opinions.
Shiv.

Steven,
Thank you for your quick reply and information there in. The video is very nice too. Great angles and composition.
So I guess, I'm going to have swap my drive and re-install my OS when the machine arrives.
I'm not going to be able to capture directly to my desktop (due to poratability reasons). So is there I way in Premire CS3 to uncompress the HDV from the camera and store it in my HDD in uncompressed format? I don't mind having to do this extra step each time if the post production experience is going to be better.
I've heard a lot about Aspect HD from you and others here as well as other forums. I'm not very video savvy yet and don't understand a lot of the vocabulary used :). I've been to their website and don't get what their products are supposed to give me either (I guess their audience understands exactly what they are saying).
What I do get is it decompresses the MPEG 2 to saves it to yout HDD for editing purposes. However, I would have thought the Premier Pro CS3 would have that capability as part of the product, no?
I'd also like to use footage that is not HDV as well as photos/images (composits) but still retain the final cut to be HDV quality. Is this possible and if so, what does it do to the editing experience/performance?
Will I be able to output the final cut back to my camera's Mini DV tape (without having to buy Aspect HD)?

Access to hardware and software inventory?

It seems that as soon as I make someone an administrator in the ZCM console, they get access to all the detailed hardware and software inventory of all devices. Is this true and if so, is there a way to deny it?
What I want to be able to do is allow someone to manage bundles but not have access to the detailed hardware and software inventory of all the devices. Is this doable? I tried various combinations of deny rights but can't seem to get it to work.
thanks for any help
Arend

axteraa,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Idea to store daily data of hardware and software requests submitted

Hi All,
suggestions to allow users to input and store basic data such as date, amount of hardware and software requested per day, etc.
Ideally present it a viewable format, i.e. a chart
I'm thinking a custom list is sufficient but looking to see if anyone else has implemented something better?
Thanks

A custom list would do, you can then use either Custom Views, Excel, REST + jQuery, Custom code or any of a dozen other options to display the data in a nice manner. It all depends on what your users need to see.

Hardware and Software inventory data shows blank in SCCM 2012

Hi All,
I have this issue. When i try to view the inventory data for hardware and software it shows blank data. Below is the screenshot of that. Mine is a lab setup and i have only 2 clients configured.
I am using the default client settings which comes with priority of 10000. I altered the inventory setting to pull .dll and .exe files with changing the interval. But still the same issue. I analysed the InventoryAgent.log and found the below error on both
the clients.
Inventory: 1 Collection Task(s) failed.
InventoryVersionNumber for '{00000000-0000-0000-0000-000000000003}' not found.
CInvState::CheckInventoryAgentConfig: Get() failed: 80041002
Can any one please help.
Gautam.75801

Hi Garth,
A reboot just fixed the issue on that system in which the options are not coming to run the setup manually.
As i had hibernated the VM's and the server in which those options were not coming is the physical box hosting the VM's (SCCM server and one more client). The physical box is also acting as a client and the SQL server holding the SCCM Database.
Now things which need to be troubleshooted are:
1. Why is it Hardware inventory report appearing after running the setup manually and not appearing automatically.
2. The software inventory report is not appearing at all even after it is being run manually.
Below is the screen shot of the default client settings policy i am using.
Software inventory:
Hardware inventory:
My LAB setup is as follows:
SCCMSVR.labtest.com - Is the SCCM server and Fail back status point, Asset intellegence sync
point and etc.
Server.labtest.com - Is the Domain controller, SQL server
SCCMTEST.labtest.com - A testing machine to push the client and to deploy patches in it.
Site code is LAB
Grath - What do you suggest is the next Plan of action which you suggest ?
Gautam.75801

Groupware conenctor Hardware and Software Installation

Hi,
We need to install groupware connector for QA and Production systems. Client wanted to install for both the systems on one Common groupware conenctorm server.
What is the hardware and software requirement ? and what are the additional privilages required for to install this connector.
Thanks,
Kristene

Please find the GW Connector HW and SW requirements.
Hardware requirements actually depend on the number of users on the Groupware Server and the amount of changes to be replicated.
The operational minimum requirements are
<b>Component                 Description
Processor                                 Intel PIII 600 MHz or higher
Minimum RAM                 256 MB
Minimum Disk Space                 100 MB
Display Mode                  640x480x16 or better</b>
Result of performance testing shows that following hardware is required to serve 1000 to 1500 users
<b>Component                  Description
Processor                                  Intel P4 2 GHz
Minimum RAM                  512 MB
Minimum Disk Space                 100 MB
Display Mode                  640x480x16 or better</b>
Performance of the connector scales linearly one box with 4 * Intel P4 2 GHz and 2G of memory will be able to serve about 5000 to 6000 users.
Note: all performance estimations are relevant to Groupware Connectors operating in Local Area Network environment.
Note: Groupware Connector may share the same box with relevant Groupware Server in case if the box has some performance and memory reserve. Use numbers above to check if there is enough free resources for amount of users to be served.
Regards,
Pradeep

VI for FireSpy400 debugging device for IEEE1394 hardware and software

Does anyone know were to find a VI for a FireSpy400 instrument used as a debugging device for IEEE1394 hardware and software?
This company make this instrument http://dapdesign.com/

Hi tomieee:
I've searched the internet for a FireSpy400 LabVIEW driver and unfortunately could not find anything. It indicated in the link you gave that this connects to your PC via USB. If this is the case you could write your own VIs using VISA to communicate with the device. This will not be a simple task but since no drivers exist, this may be your only option.
USB Overview
Regards,
Emilie S.

Remote Desktop Services - VDI / Hardware and Software requiremnts

I am going to plan to do POC for 50 user on customer end for Microsoft VDI installation. For this i required hardware and software requirement.

Hi Pratik,
Thank you for posting in Windows Server Forum.
It all depends on how you want to configure your VDI environment. In Server 2012\R2 there are 2 flavors: Pooled & Personal and further can deploy both that as Managed\UnManaged deployment. You can check following article for further details.
RDS Hardware Sizing and Capacity Planning Guidance
http://blogs.technet.com/b/iftekhar/archive/2010/02/10/rds-hardware-sizing-and-capacity-planning-guidance.aspx
Choose a VDI Deployment Scenario
http://technet.microsoft.com/en-us/library/dn645525.aspx
Deploying VDI for RDS 2012 / 2012R2 – Part I
http://thewolfblog.com/2014/03/26/deploying-vdi-for-rds-2012-2012r2-part-i/
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

ADF Webcenter Portal Deployment System Hardware and Software configurations

HI All,
Anyone please help me to sort out this issue.
I need to have the production System requirements of Hardware and Software.
Please let me know.
Thanks / Balaji.

Hi.
Do you need High Avaiability in your environment?
Are you planning work with Spaces or Portal?.
A typical architecture consists in a cluster of two machines por HA.
About your response/users requirement I think that next settings will be OK (approach):
- Each WC_SpacesX node 4g or 6g
- Each UCM_Server 2g
- Each WC_CollaboratrionX 1g
- If don't use Portlets, Analytics and others you can maintain shutdown these servers.
Approximatelly you'll consume 23GB RAM with all components working (Analytics also, portlets... also).
For performance and good response of pages don't forget next tips:
- WebTier OHS installed with DEFLATE module enabled. It reduces too much static files loaded in WebCenter like CSS, JS and Images.
- Put your custom images in OHS instead of inside of WebCenter platform.
- Don't install WebCache. It's not useful for WebCenter.
- Configure JoC (Java Object Cache) for cluster caching.
Remember that this information it's only an approach based on my experience, you've to investigate and work with Oracle to decide the best apporach for your requirements.
Regards.

What order do I reinstall drivers, hardware, and software?

Similar Messages

Maybe you are looking for