What parameters to be set during installation and DB creation

i am going to create 10g/ 2003 server database and
migrate from 8i / 2000 server ( 15 gb) running in archive log mode.
what parameter i have to set and check
( SGA,PGA FLASH_ REC ,performance tuning parameters etc) during installation and database creation.
santhanam.

I know there are huge amount of docs out there but I collected these links in real upgrade tasks/experience...
[Oracle® Database Upgrade Guide 10g Release 2 (10.2)|http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/toc.htm]
[Oracle Metalink: Complete checklist for manual upgrades to 10gR2  Note:316889.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=316889.1]
[Oracle Metalink: Rule Based Optimizer is to be Desupported in Oracle10g  Doc ID: 189702.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=189702.1]
[Oracle Metalink: Database Upgrade Companion|https://metalink.oracle.com/cgi-bin/cr/getfile.cgi?p_attid=466181.1:upgrade_guide1]
[Oracle Metalink: Managing Rollback/Undo Segments in AUM (Automatic Undo Management) Doc ID: 135090.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=135090.1]
[Oracle Metalink: Managing CBO Stats during an upgrade to 10g or 11g Doc ID: 465787.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=465787.1]
[Oracle Metalink: Complete Upgrade Checklist for Manual Upgrades from 8.X / 9.0.1 to Oracle9iR2 (9.2.0) Doc ID: 159657.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=159657.1]
[Oracle Metalink: Instructions to Upgrade Context on 8.0.6 to either 8.1.7 interMedia Text or 9.2 Oracle Text upon database Migration from 8.0.6 Doc ID: 209544.1|https://metalink.oracle.com/CSP/main/article?cmd=show&type=NOT&id=209544.1#Migration%20Plan%20for%208.1.7%20Using%20interMedia%20to%209.2]
because I would consider upgrading...
Edited by: Kecskemethy on Oct 2, 2009 2:19 AM

Similar Messages

  • I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried installing an update to QuickTime. An error occurred and it wouldn't install. I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.  Now what?

    I tried removing the QuickTime program, but a window appeared telling me that a fatal error  ccurred during installation and I could not remove the program.
    I think we'd better see if some other application (other than QuickTime itself) has dropped old QuickTime componentry in the system files on the PC. (If there's a version mismatch between the old componentry and the "QuickTime proper" componentry, that can create those symptoms.)
    So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
    First we'll need to change some view options on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • What parameters should be set when i receive standard material through idoc

    Hi,
    What parameters should be set when i receive standard material through idoc in inbound system.
    regards,
    Gurprit Bhatia

    http://help.sap.com/saphelp_nw04/helpdata/en/78/21755951ce11d189570000e829fbbd/frameset.htm
    How to understand "outbound parameters" and "inbound parameters" in WE20?

  • My New Retina MacBook Pro crashes during installation and cannot turn back on?

    My New Retina Display MacBook Pro suddenly just crash all of a sudden during installation, it happened when in a white background ther is a Lion image at the center and a progress bar at the bottom. The MacBook cannot be turned back on after this crash!!!! Does anyone has the same problem?
    P.S. I had connected to a power cable during installation and didn't touch it at all during installation.

    Similar problem here. Using the new Macbook Pro with Retina Display, happily for a week. Tonight it suddenly died, turned itself off, that is. I couldn't turn it back on now.... Very frustrating. Any solution except for bringing it back to the Apple store?

  • What i need to do during packaging and deploying?

    hello,
              what i need to do during packaging and deploying with my JSP,EJB,HTML
              files to the hosting company?
              if it is .java extension, do i only package the .class file without
              .java extension files?
              coz i dont want somebody copy my source code, then how?
              thanks a lot
              

    you dont need to send .java files
              package up your class files, jsp, images, jars etc into an ear file
              you may also want to check that your ISP supports weblogic applications
              "alex mok" <[email protected]> wrote in message
              news:[email protected]..
              > hello,
              > what i need to do during packaging and deploying with my JSP,EJB,HTML
              > files to the hosting company?
              > if it is .java extension, do i only package the .class file without
              > .java extension files?
              > coz i dont want somebody copy my source code, then how?
              >
              > thanks a lot
              

  • Plant selection missing from dropdown during PR and PO Creation

    Hi Everyone,
    Good day!
    I am currently experiencing problems during PR and PO creation. Everytime I try to access the list of selection for the plant field, the system does not display any entries. (In our sandbox client)
    In our dev box, I was able to perform the 2 fucntions succesfully. Can you guys please help me check what would be the issue for this? What would be the procedure that I should follow to investigate this concern?
    Best regards,
    DeLo

    Hi,
    It is up to the consultant who is configuring the system to decide how it ahould be done... one dev 1 TR or many dev 1 TR.
    Say now you have created 2 TR's for plant creation and plant assignment.
    The TR's should move in to other client has it is created.
    now for example ur plant assignment TR is moved first and then the plant creation. the other client in which it was moved will contain only plant creation that is it has our assignment TR is overwritten by the 1 TR which is plant creation.
    Usually consultants do it this way.
    1 TR - Org Strusture
    1 TR - Purchasing
    1 TR - Inventory
    1 TR - Invoice
    1 TR - Valuation and AAD
    and so on..
    Thanks & Regards,
    Kiran

  • What parameters determine Planned order production start and end dates?

    Greetings
    We are using the graphical planning table @ MF50 to firm Planned Orders (Basically checking off "Firm Order" field within the Planned Order). We are on ECC 6.0
    Whenever I backflush, the production start and end dates get overwritten (The Basic dates do not change).
    I would like to prevent this. Can someone advise me on what parameter controls how the production start and end dates getting changed?
    Thank you
    Hanarin

    Hi,
    Calculating production dates ( Lead time scheduling) are explained in detail in the SAP help URL as below:
    If "Automatci Scheduling indicator" is set in the customizing for scheduling parameters then after every change relevant to scheduling, the production order is also automatically rescheduled before saving.
    You need to check these settings.
    regards
    Datta

  • What parameters must be set when AUTO_CONFIGURATION = NO

    Hi,
    I'm using ODI for CDC (Oracle 10g Consistent (LOGMINER)) and one of the notes says "in a production environment a DBA should set these parameters rather than letting ODI automatically set them". I would like to use AUTO_CONFIGURATION=NO so this means that the parameters must be set manually.
    My question is: do one know which parameters must be set manually?
    Thx very much for your help,
    Cheers,
    Nelson Branco

    http://help.sap.com/saphelp_nw04/helpdata/en/78/21755951ce11d189570000e829fbbd/frameset.htm
    How to understand "outbound parameters" and "inbound parameters" in WE20?

  • How do I get iTunes to recognize my external, wireless-networked hard drive (Western Digital) during installation and set-up of iTunes?

    Hello,
    I'm re-installing iTunes for Windows 7 (64-bit) due to a bug that occured with the iOS7 update.  The Genius Bar recommended that I uninstall and re-install iTunes from scratch.  All of my music is located on a WD external hard drive that's connected wirelessly to my PC.  I didn't have this problem until the iOS update for iphone 5, v.7.0.
    Any help is greatly appreciated.
    Thanks!

    I didn't relate this; now iTunes will not install on my PC when pointed to my external, wireless-networked hard drive.  It appears that it doesn't recognize it.

  • Mac OS X Reinstall: "Idles" during installation and stops progress

    I am doing an erase/reinstall of the OS. Am using the DVD that came with my laptop when I bought it last August.
    I noticed the progress bar quit loading, and checked the log: it said it was idle for 10/20/30/40/50/60 minutes "with one connection open." So I tried it again. Progress bar loaded a bit more, then idled. Tried it again, a tiny bit more, than idles. ***?
    Can't really keep doing it this way as it takes long enough as it is. I'm getting really frustrated with this mac.
    Would appreciate any help, thanks!

    There appears to be some kind of problem, but without knowing
    how you arrived at using the OS X Install and restore disc, the
    answer will not be forthcoming.
    When you insert the DVD, and restart the computer while holding
    down the C-key, do you hear the optical drive working to cue the
    disc, and then after some time, of continuing to hold the C -key
    down, does the Installer's start window appear?
    You have options in the booted Installer, prior to actually installing
    anything from it; one of them is among tools in the Installer's drop-
    down menu bar, once the Installer's main window appears.
    There are options, but only once the computer is booted from that disc.
    So far, there is no indication of how far you got, there. And if you tried
    to use any of the Disk Tools to repair the disk, or erase it totally, etc.
    So, please clarify any details you applied to the situation up to this problem.
    There is a possibility of the disc set you have, being defective somehow.
    If you have AppleCare in effect, you could call them and maybe trouble-
    shoot the matter. If the disc set is defective, they could authorize a new
    replacement set of the original discs.
    {What was the first problem, the reason why you are seeking to reinstall?}
    Good luck & happy computing!

  • What is the best set up (hardware and/or software) to store and access movies and music purchased through apple tv without using the computers storage space

    I have run out of space on my imac desktop, which only has 500GB of storage, due to the movies, music, etc. that have been purchased through iTunes and Apple TV.  I do not want to delete the purchases but need to free up space on my computer.  I am looking for the best scenario for moving the media to another source and still have access the media from Apple TV and possibly from ipads, macbooks, ps3, etc. within my house.  I have been looking at upgrading the Time Capsule to a larger capicity one and/or having a backup hard drive to the time capsule.  I would like to know what other people are doing to have these features without filling up their computer's hard drive.  Please advise.  If a media server other than the computer is needed please explain.  Thanks for your help.

    Can the time capsule be set up to back up both the computer and the external hard drive, therefore creating a second copy of both? 
    Can the external hard drive be set up to store all the media which can then be accessed by apple tv and other devises as if the media was on the computer OR will the media have to moved back to the computer's hard drive in order to be viewed on other devises?  Another way to look at this is can you set up iTunes to find the media stored on the external hard drive and access it without moving the media back to the computer?
    I realize this must be a problem for many people utilizing iTunes and Apple TV to purchase and view movies and listen to music but the solution does not appear to be easily determined.  I'm sure the first solution would be to just buy a computer with a larger hard drive but that is not the most economical.

  • Error message during installation and after reboot. I can't continue with installation.

    Error message while installing 10.6.3. And even after reboot I can't do anything anymore same message pops up after a few minutes. How can I get new version installed without error message and it ejecting the Installation Cd? Tried booting from external drive since the one on my Mac is not working. Any tips on how to proceed?

    Installing or updating Snow Leopard:
    http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf

  • I got an "Apple mobile Device' failed to start error during installation and itunes won't install.

    For some reason I got an error message trying to update itunes on my Vista PC and for some reason could not run itunes. I uninstalled itunes completely and tried to download a new installation. Near the end of the installation I got this error message. "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I was given the choices of 'cancel', 'retry', and 'abort'. I tried 'retry' and got the same error again. I tried 'abort' and the installation eventually ended in another error and suggested that I reinstall itunes.  I was in the administrator's account when I attempted all these things.Has anyone had a similar problem or knows how to get the installation completed?? Thanks for any help.

    Hello smittylin,
    The following articles provides steps that can help get iTunes back up and running.
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • It says there was an error during installation, and I should reinstall...? But I have a million times

    I don't know i'm doing this for my sister. She keeps uninstalling and reinstalling, and everytime she clicks on it, it says 'there was an error, please reinstall, error code 7, windows error code 998 ' or something like that. how do we stop this?

    Is there another error message along with the 7 mentioning a specific file? If so, what is the name of the file? (Precise spelling, please.)

  • Visa resource control loses value set during config and saved to step properties in TestStand

    I'm using a Visa resource control to set the instrument handle in my VI (edit sub-step) and it gets saved into a step property of a custom step I've built at edit time. At run time the control value is intermittantly changed to "temp 0" value and I don't understand why. I have LabVIEW 7.1, TestStand 3.0

    Hi kphite,
    Are you using the Refnum to Session.vi and Session to Refnum.vi?
    You would use the Refnum to Session.vi to convert your Visa session value to a U32. Then you can pass this back to TestStand.
    Going back to LabView you use the Session to Refnum.vi to convert a U32 back to the Visa session.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

Maybe you are looking for