What parametrs i have to pass in CONVERT_OTFSPOOLJOB_2_PDF (fm) to convert

Hii All
Can any body help me What parametrs i have to pass in CONVERT_OTFSPOOLJOB_2_PDF function  to convert all the copies of a spool request into pdf. Suppose a spool request have three copies.
Thanks
Viki

Hi Vikas,
There is standard report available in SAP to convert spool jobs to PDF. The report is RSTXPDFT4. This report also uses the FM CONVERT_OTFSPOOLJOB_2_PDF, you can check for the parameters there itself.
Reward points if useful.
Thanx & Rgds.

Similar Messages

  • I forgot my ipod pass...what do i have to do to open it ?

    I forgot my ipod pass...what do i have to do to open it ?

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:         
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store   
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • I forgot my passcode and now i am locked out...is there a way i can request to have the pass code un locked by sending it to my email trhat is registered with Apple?   what to do?

    I forgot my passcode to my iphone...what an i do?

    s there a way i can request to have the pass code un locked by sending it to my email trhat is registered with Apple?
    No
    what an i do?
    Restore your phone and set it up from scratch.

  • What type of out put parameter should i have to pass here?

    Hi all,
               I'm working on a custom function module. In that i have to call a standard function module "SAPWL_READ_STATISTIC_FILES".
    This standard FM is returning the values in changing parameter "ALL_STATS" of type "SAPWL_ALLSTATS". SAPWL_ALLSTATS is a structure in a pool structure "sapwl".
    My problem is when i'm testing the standard FM with some input parameters its throughing some values into changing parameter "ALL_STATS", but in my custom FM for the same standard FM i'm passing the same values its not throughing any values into that changing parameter "ALL_STATS".
    So can anybody check this standard FM and suggest me how to declare the output parameter type and pass? Its a pool structure there i'm getting problem to define it. Help me out please.
    Thanks & Regards
    Naidu

    Hello Naidu
    Using the sample report ZUS_SDN_READ_STATISTICAL_FILES I can fetch a couple of records from the system (ERP 6.0).
    If your selection does not work within your custom function module then perhaps there is some conversion problem with the input data (keep in mind that the SAP-GUI takes care of all conversions, e.g. a date '10.11.2008' is automatically converted into '20081110').
    *& Report  ZUS_SDN_READ_STATISTICAL_FILES
    *& Thread: What type of out put parameter should i have to pass here?
    *& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1119462"></a>
    REPORT  zus_sdn_read_statistical_files.
    TYPE-POOLS: sapwl.
    DATA: gt_stats    TYPE STANDARD TABLE OF sapwl_statrec.
    DATA: gd_msg      TYPE bapi_msg.
    START-OF-SELECTION.
      CALL FUNCTION 'SAPWL_READ_STATISTIC_FILES'
        EXPORTING
          read_client                 = syst-mandt
    *     READ_TIME                   = '001000'
    *     READ_TIME_DELTA             = '000200'
    *     READ_EXCLUDE_USERNAME       =
    *     READ_START_DATE             = SY-DATUM
    *     READ_START_TIME             = ' '
    *     READ_USERNAME               =
    *     READ_WORKPROCESS            = 'FFFF'
    *     STATISTIC_FILE              = ' '
    *     AS_STATISTIC_FILE           = ' '
    *     NO_BUFFER_FLUSH             = ' '
    *     WAIT_FACTOR                 = 150
    *     INCLUDE_APPL_STAT           = ' '
    *   IMPORTING
    *     PROBLEMS                    =
    *     TOTAL_RECS_READ             =
    *   TABLES
    *     PROTOCOL                    =
    *     RFC_RETURNS                 =
    *     SERVER_LIST                 =
        CHANGING
          all_stats                   = gt_stats.
      DESCRIBE TABLE gt_stats.
      WRITE syst-tfill TO gd_msg NO-ZERO.
      CONDENSE gd_msg NO-GAPS.
      CONCATENATE gd_msg 'Records found' INTO gd_msg
        SEPARATED BY space.
      MESSAGE gd_msg TYPE 'I'.
    END-OF-SELECTION.
    Regards
      Uwe

  • HT4061 Just updated my phone last night. When I woke up it said enter pass code I don't have a pass code what do I do

    Updated photo and said enter pass code I don't have a pass code what do I do

    Davidfink71 wrote:
    what do I do
    1)  Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • I have been debited 35chf for purhase of itunes match, i dont know what it is and never passed this order

    I have been debited 35chf for purhase of itunes match, i dont know what it is and never passed this order

    Hi homayra,
    Welcome to the Apple Support Communities!
    I know that it can be concerning when you see a purchase from iTunes that you do not recognize. Please use the information in the attached article for how to proceed.
    How iTunes Store charges might look on credit and debit card statements - Apple Support
    Get more help
    If you compared your purchase history (and family members' purchase histories) to your statement and still don't recognize the charge or want to request a refund, contact Apple Support.
    If you don't have an iTunes Store account (Apple ID) and see charges on your statement, contact Apple Support. You can also request a refund if the charge is shown in your purchase history.
    Best regards,
    Joe

  • I have galaxy note n 7000 and what parametrs should i choose to make job of browser faster and productive

    what parametres of content Google Переводчик
    Определить язык>английский
    what settings should I choose to, and does not buggy korrektnoo otobrzhal konten
    Определить язык>английский
    Переводчик – главная страница - Главная страница Google
    Напишите отзыв.
    Версия Поиска:
    Мобильная | Полная
    ©2012 Google - Конфиденциальность

    what parametres of content Google Переводчик
    Определить язык>английский
    what settings should I choose to, and does not buggy korrektnoo otobrzhal konten
    Определить язык>английский
    Переводчик – главная страница - Главная страница Google
    Напишите отзыв.
    Версия Поиска:
    Мобильная | Полная
    ©2012 Google - Конфиденциальность

  • Is there a way to have multiple pass codes on a singe iPad or iPhone?

    I would like to have multiple pass codes on my iPad2s. I need a separate pass code for the 'Reset" functions. I want to use one pass code for when the iPad is "booted' or woken up  then a different passcode for when the "Reset" funtions are accessed. Is there any way to do this? During my testing I have not seen away to have different pass codes for the different functions.
    i am using the iPhine configeraor but have not havd any luck setting up diferent pass ciodes when restrictions is runed on.
    What I would really like is to completely disbalte the "Reset" function from within iPhone onfigurator.
    Any advice would be appreciated.
    Thanks

    Sorry but no, that's not possible, at least not with the current version of iOS. You can have a different passcode for the screen lock and for the Restrictions, but that's all, and the Reset functions cannot be restricted.
    Regards.

  • HT1202 I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?

    I have just bought a new I pad 3 and want to give my I pad 2 to a friend. What will I have to do to clear my info on the old I pad and set it up on my new one? How are apple I D effected and passwords cleared?
    Any advice welcome.

    To clear to old before passing it on, open the Settings app and tap on General (left hand menu). Scroll down and tap on settings, then tap on Erase All Content and Settings.
    If you have been synching the iPad to iTunes on a computer, you should also have backed it up. If you havn't backed it, you will want to do so before clearing the settings and use the back up to set up your new iPad.
    You may dinf soem of the articles here useful:
    http://www.apple.com/support/ipad/syncing/

  • What value we need to pass as parameter in where clause in select query

    Hi ALL,
    I have written following query, it was executing fine and returning me all the rows with search criteria.
    SELECT *
    FROM
    PRTY_RQST PR
    JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
    JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
    JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
    LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
    JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
    JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
    JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
    JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
    WHERE (BIAP.BUSN_APPLC_NM = 'bpel')
    AND (INTPTY.INTN_PROCES_TYP_NM = 'FulfillmentOrder')
    AND (PR.UPDT_BY = 'update3')
    AND (INSTS.INTN_STATS_NM = 'Submitted')
    AND (PR.CHLD_RQST_IND = 'N')
    AND (PR.TRACK_RQST_IND = 'Y')
    AND (RQSTYP.RQST_TYP_NM = 'PensionPortfolioRebalance')
    AND (RQSTYP.RQST_CLASS_NM = 'Composite')
    AND (PRKYTP.PRTY_KEY_TYP_NM = 'NPIN')
    AND (PRTKEY.PRTY_TYP_VAL = '101101' )
    AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM = 'PlanNumber')
    AND (ADTINF.ADDTN_RQST_TYP_VALUE = 'TBMBUpdated');
    My question here is i don't want pass the value for BIAP.BUSN_APPLC_NM, still want to get the values for remaing conditions. what value i need to pass here.
    I tried Null it giving me no rows. can some one help me on this.
    Thank you in advance.
    Vijay

    933325 wrote:
    thank you,
    since it is search criteria. I have to use OR instead of AND. this resolved my problem.
    SELECT *
    FROM
    PRTY_RQST PR
    JOIN BUSN_APPLC BIAP ON BIAP.BUSN_APPLC_ID = PR.BUSN_APPLC_ID
    JOIN INTN_STATS INSTS ON INSTS.INTN_STATS_ID = PR.INTN_STATS_ID
    JOIN INTN_PROCES_TYP INTPTY ON INTPTY.INTN_PROCES_TYP_ID = PR.INTN_PROCES_TYP_ID
    LEFT JOIN RQST_TYP RQSTYP ON RQSTYP.RQST_TYP_ID = PR.RQST_TYP_ID
    JOIN ADDTN_RQST_INFO ADTINF ON PR.PRTY_RQST_ID = ADTINF.PRTY_RQST_ID
    JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF.ADDTN_INFO_KEY_TYP_ID = ADDKEY.ADDTN_INFO_KEY_TYP_ID
    JOIN PRTY_KEY PRTKEY ON PR.PRTY_RQST_ID = PRTKEY.PRTY_RQST_ID
    JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY.PRTY_KEY_TYP_ID = PRKYTP.PRTY_KEY_TYP_ID
    WHERE (BIAP.BUSN_APPLC_NM = null )
    OR (INTPTY.INTN_PROCES_TYP_NM = 'FulfillmentOrder')
    OR (PR.UPDT_BY = 'update3')
    OR (INSTS.INTN_STATS_NM = 'Submitted')
    OR (PR.CHLD_RQST_IND = 'N')
    OR (PR.TRACK_RQST_IND = 'Y')
    OR (RQSTYP.RQST_TYP_NM = 'PensionPortfolioRebalance')
    OR (RQSTYP.RQST_CLASS_NM = 'Composite')
    OR (PRKYTP.PRTY_KEY_TYP_NM = 'NPIN')
    OR (PRTKEY.PRTY_TYP_VAL = '101101' )
    OR (ADDKEY.ADDTN_INFO_KEY_TYP_NM = 'PlanNumber')
    OR (ADTINF.ADDTN_RQST_TYP_VALUE = 'TBMBUpdated');
    AND (ADTINF.ADDTN_RQST_TYP_VAL_DT ='06-JUN-12 04.18.56.000000000 PM')
    AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM ='123123') ;
    once again thank you all.But that's a completely different query than what was in the original post

  • 40 L7355 I have the pass for the locked channels on my DTV how to enter it ?

    I have I L7355 40'' 3d smart TV.
    I have DTV with CA Modul I have 5 scrambled channels - I have the pass for them. 
    There is no feeld where i can put that code.
    When I go to the chanel i stays black and no feeld showes up to enter the code.
    I have searched the manual and all the options for the DTV and no place to enter the code was found ?
    What to do ? Where to enter the code for my scrambled channels ?
    One of my friends have the same TV provider. He have some LG smart tv. When he goes to the channel a feeld showes up and he enters the code.

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region. 
    - Peter

  • I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

    I'm having trouble buying a season pass for The Americans. I have purchased passes to Justified for the past 4 years with no problem. Can't figure out why this purchase won't work.

    What is the problem that you are having ? If you are getting an error message then what does it say ?

  • I am stuck in an App with Guided Access and have forgotten pass code? Help!

    I have forgotten pass code for Guided Access and can not get of the App? I don't know what to do next? I have tried resetting by holding Home button and on/off for 10 seconds. What now?

    Hi Suzanne
    If you continue to be unable to guess the passcode by brute force attempts, you can connect the device to a computer that has synced the device and unlock things with a sync.
    If you have never synced with iTunes then you can try this:
    1.Hold the Lock Button
    2.Slide the Slide To Power Off slider [If touch is disabled/you're unable to slide it, do a hard reset — hold the lock and home button until the Apple Logo appears]
    3.When your iDevices powers up, immediately exit the app that automatically opens.
    4.Go to Settings > General > Accessibility > Guided Access
    5.Click Set Passcode
    6.Enter new password
    7.Reboot again.
    8.Wait for the app to automatically open and Triple tap the home button
    9.Enter the new password

  • I replaced my iPhone with a Galaxy 5 and am not receiving all of my text messages. The sales person told me to remove my phone number from iTunes to stop this from happening. Is that true? What does iTunes have to do with text messages?

    I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to do with text messages anyway?

    You need to remove your phone number from the iMessage system.
    Read here: http://support.apple.com/kb/ts5185
    ~Lyssa

  • HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer.  The printer is working. What do I have to do to be able to scan again?

    Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software.  If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

Maybe you are looking for