What part of the registry is related to SAPI?

system mechanic pro is incompatible with windows 8.1 64bit. Means programs like adobe reader and foxit reader and Babylon can not use windows TTS engine.
This is because registry changes, because I'd undo the registry will solve the problem.
Systems mechanical and Windows are both updated.
Can you tell me what part of the change in the registry is causing this problem?
I want to make a
backup of that part of the registry
,and I'll
fix my other windows that I
can not undo the registry edited.

Hi,
I think this issue can be caused that if the older version of system mechanic is not compatible well with Windows 8.
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=System%2BMechanic&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14
As following article, version 12 is released to improve the performance in Windows 8.1:
System Mechanic Version 12 Now Available, Includes Enhancements for Windows 8.1
http://www.maximumpc.com/system_mechanic_version_12_now_available_includes_enhancements_windows_81
Note: this third part website is not on behalf of Microsoft.
Thanks for your understanding.
Kate Li
TechNet Community Support

Similar Messages

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

QuickTime version 10 can only record the entire screen.
10.1, 10.2 and 10.3 offer part of the screen recording.

Help help.... what part of the OS writes the dock and desktop changes to memory in the .plst files associated?

I've tried rewplacing .plst files, reinstalling the 10.5 and running 10.5.8 combo updates, gone line by line thru user prefs comparing to my working laptop using the same software, but nothing works. What I have noticed is that on my working OS10.5.8 on my MacBookPro the Dock.plst file gets updated everytime I restart. Something is broken in the ability for my MACPRO tower to write to the .plst and .db files associated with screen settings such as what folders are left open at closedown and any changes to the dock. I completly reinstalled 10.5.4 OS from the cd saving my user info because I have a lot of music software on here that I seem to be losing through all this, but the reinstall did not fix this problem. It just took a long time to get everything back to 10.5.8. The .plst files are in there from last month or last week and the just don't update. I replaced them in a test from my working laptop and they make everything look llke the laptop dock but then when I change them they don't save. Where is the app that saves these changes to the dock and desktop? If I knew I could see if that script/app etc would look like my laptop. Line by line I've tried to compare in all system and library folders, cashes preferences, but I can't seem to find it. Anyone here deep enough into this software to help me. I would be so very grateful... very... P.S.the dock reverts to an old setting and the screen looks like it did when I shut down about 3 weeks ago. Nothing I do is saved on these parts of the mac. I've redone permissions etc...
steve

no change....
I even went to the other user name I just set up where things work and put all the dock system etc and desktop .db & .plst files into the main user name where I'm having the problems and it opens upon restart looking like the other users settings, but when I make a change in views or dock or windows open on desktop they do not get saved when I restart. It's frozen as the one I put in there. I need to know what part op the OS writes to these .plst and .db settings so I can replace it or parts it needs to do this. It might be another part of the user Preferences as it only happens in my older user name. But that name has so many plug ins and apps tied to it, it would be insane to try to change all that...... maybe I can drag my older preference folder to a new user and see what happens.....

What parts of the MacBook Air are really sensitive and easily damageable?

I've been with my mac for over 3 weeks now, and I'm worried that some of the ways people grab it or something might damage it & I would like to know so this comptuer lasts a long time. So far it hasnt fallen. Thanks guys
Rebeca Estrella

well, you asked "What parts of the MacBook Air are really sensitive"
not "HOW is the easy way to damage one"
The easy way to damage one badly is from a spill.
the SENSITIVE parts, as you asked are the LCD display. They are by nature rather fragile creatures to be certain.
Cleaning Your MacBook
Use a very lightly damp, soft (if you can squeeze the cloth very tightly and even a drop comes out, its still too damp), lint-free cloth to clean the computer’s exterior. Avoid getting moisture in any openings and be very careful not to get the damp cloth around the trackpad edges or around the inside edge between the monitor and its bezel. Do not spray any type of liquid directly on the computer. Do not use sprays, solvents, or abrasives; do not attempt to use any solvents on the LCD display either directly (especially!) or indirectly. There is never any call to use any type of lens cleaning solvents on the screen of your LCD display. Again, do not spray any liquid directly on the screen. Never use Kleenex, or paper towels, these are abrasive. Soft cotton cloth only or a microfiber lens cleaning cloth.
No rubbing alcoholic, no glass cleaners of any variety, no acetone, no lens cleaning sprays, no AR coating sprays, no sprays sold as "for your LCD TV", no sprays sold as "for your notebook display". Water only, and never sprayed on, and never dripping wet even slightly on the cloth.
Use a soft paintbrush, lipstick lens-cleaning brush, or makeup brush for cleaning
One very useful tool for cleaning dust from the LCD screen, the hinge area of your notebook and around the keyboard, is a very soft inexpensive small paintbrush or a makeup brush. The less you wipe your LCD screen with anything like a cloth, the better. This small brush is very handy, quick, and ideal for removing dust from around and on your notebook. Lipstick lens cleaning brushes are sold online, and used in the photography business for camera lenses and are ideal perfect portable cleaning brushes for your macbook.
Dont press on your LCD screen or spray it
Do not attempt to use any solvents on the LCD display either directly (especially!) or indirectly. There is never any call to use any type of lens cleaning solvents on the screen of your LCD display. Do not spray liquid directly on the screen. Avoid any touching or pressure upon your LCD screen.
Also NEVER pack your Air in a backpack where books can press against the LCD assy.
Dont 'backpack' your Macbook Air without having special consideration
Many college students or people in general are fond of using non-idealized backpacks (without a padded laptop compartment) along with their books. Sandwiching books around your notebook etc. is an extremely bad idea and can lead to your LCD screen being destroyed when heavy textbooks are pressing against same, or when dropping your backpack, these books slam into your Macbook causing great potential for damage.
The other "sensitive" part isnt sensitive anymore ,the USB ports are upgraded in 2013 and are hard to cause tab damage on.
The other "sensitive" part would be the fan and dust bunnies.
Dust and fuzz residue caked onto the internal fan
Dust bunnies and Fluffy’s fur
Your Macbook’s cooling system, including fan and rear vents pull cool air in from the back and (in the case of the Macbook pro) also from the left ports bringing this air around the processor, GPU, and heat sync and blow it out the back, as such your Macbook acts like a little vacuum cleaner of the air around you. If you use your notebook in a dusty area or around a lot of pet fur, this can quickly, even under seemingly ideal clean rooms, accumulate inside your notebook especially on the fan blades reducing its capacity for cooling and in a worse case scenario seize your fan due to caked on dust on the fan blades. Avoid very dusty areas or places where, over the long term you know fuzz, fur, or even smoke can enter into your Macbook.

Making a password show what parts of the document you see

I have a random request from a client that I am not sure is even possible.
They want their document to be used by two people, one of them will only be able to see say 4 pages of it while the other will be able to see it all including what the person before had entered.
I think you can get around the text part quite easily but to have it show different parts of the form via a password is very hard for me to do (even if it is possible at all)
Can anyone lend me a hand in this?
If you need me information feel free to ask.

It sure is possible. I have been doing it for quite some time now and this would be a perfect situation for the Action Builder if coding in FormCalc is not your thing, but I can give you both.. I will use a sample form for the demo so if the lingo doesn't match up to your form, let me know or if you need an example. If anyone has anything simpler or I missed something, let me know. PM me if you want a sample form.
Create a new PDF and add in a second blank page and set that page to hidden in the Object field. Place a text field on page 1. Go to the Action Builder (in Windows go to the toolbar at the top, then "Tools" then select "Action Builder". The Action Builder is a great tool to add some extra functions into your PDFs with the preset actions. From the Action Tool box select the "Add New Item" from the top left of the box, right next to the trash can icon. This will create a new Action. There are 2 things for the Action: a condition and then a result. In the Condition section click the "object" link and then select the text field you put on page 1. Once you select the text field, the Condition box will change to "when text field TextField1...." and there will be 2 drop down boxes. With the condition set as "Is" put your password in the blank field. Then in the Result section select the drop down box and go to "Show/Hide an Object"and then select Page 2. What this will do is when TextField1 is equal to your password, page 2 will be visible. You can do this with not only a page, but specific elements within the PDF. So additional Textfields, pages, static text or other elements. One thing to keep in mind is what I like to call "foward/backwards logic" in that a user can enter the password to show the data, then remove it to hide whatever. Just go back through the Action Builder in reverse order that you did, where when TextField1 IS NOT the password, set the elements to hidden.
If you can do this via Formcalc, the setup would be similar, but instead of using the Action Builder you could do something like, create a numericField that has a number based password. On that field, go to your Script Editor, select "Change: from the show section, change the Language to FormCalc and then enter:
if ($.rawValue==1)then
xfa.resolveNode("Page1).presence = "visible"
else xfa.resolveNode("Page1").presence = "hidden"
endif
The bolded 1 is the password. The second and third lines cover what you want hidden or visible. So change whatever you want the password to, change the hidden and visible sections and then give it a try. You could even set this on a docReady show option as well to check that field when the form is opened if perhaps the first person saved the PDF with the hidden sections open. That way they do not need to enter the password every single time. Of course before they send it they should remove the password. Just be ready that whenever the user opens the form, even if they do not change anything, they will be prompted to save.

HOW TO FIND THE LOG FILES RELATED TO SAP XI

Hi Experts,
I want some information on finding the log files in SAP XI. When the XI picks the file from Source system and a series of process undergoes and finally delivered to the receiver system. I need the log files related to all process since the start of the scenario and untill the end of the scenario.
Thanks in Advance,
Sunil K Shetty

HI,
Please see belo links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8314cb90-0201-0010-f586-9155dba8934d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50#search=%22xi%20archiving%22
http://help.sap.com/saphelp_nw04/helpdata/en/aa/fce73a86e99c77e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/15/01df3a1fd91974e10000000a11402f/content.htm
Regards
Chilla..

What are all the E-Modules available in SAP HR

Hi
Please let me know what are all the e-modules (e-recruitment, e-travel....) available in SAP HR
Thanks
Manian

Hi,
Almost all the Modules of SAP HR has Web Applications. We have ESS/MSS applications for Personnel Administration, Personnel Management, Travel, Training And Event Management (LSO), Time Management & Recruitment.
Regards,
Suba

Which part of the machine is related to the keyboard flex problem ?

Mine is T420s
And I got a keyboard flex problem.
Actually which part is related to this problem ?
Isn't it inclusive to fix this problem in the warranty ?
thx

Mine doesn't exhibit any keyboard flex and I don't think it's a common issue with T420s; anyway:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420s-Keyboard-Flex/td-p/454851/highlight/t...
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/t420s-keyboard-flex/m-p/755255/highlight/tr...
T420s i5-2520M HD3000 480GB Crucial M500 SSD 8GB RAM Ericsson F5521gw
T430 i5-3210M HD4000/NVIDIA 5400M 512GB Crucial MX100 SSD 12GB RAM Ericsson H5321gw

What part of the 'soa suite' is a cost option?

If I have iAS EE and 10gDB EE w/ partitions olap and iDS
what in the quick start is using options that I would have to purchase?
Business rules?
BPEL?
A

A.
worth asking a sales guy responsible for your account - I'd guess you need to purchase the SOA Suite as one - and can leverage your [existing] DB as dehydration store ..

What are all the Date pickers available in SAP Netweaver?

I am using Java based SAP Netweaver. I want to enter DATE OF BIRTH in a WebDynPro page. Default date picker shows current month only (refer attachment). Picking date with option to change Year, Month is required. Please help in this regard.
With Thanks,
Arun
Message was edited by: Andy Silvey

Hi Arun,
It can also be access issue.
Check with the security ream if you have correct roles assigned or not.
Regards,
Ravi

How the tables are related in sap-crm

Can anybody help me out ??regarding the relationship between below tables??
CRMD_PARTNER Opportunity/Activities based on Contact
CRMD_LINK Opportunity/Activity Contact Link table
CRMD_ORDERADM_H Opportunity / Activity header table
CRMD_ACTIVITY_H Activity header table
BUT000 Client / Contact/Employee Name
Thanks in advance,...
bye--
Pradeepa

1 ) CRMD_ORDERADM_H -
TAKE GUID
2)CRMD_LINK --->FIND GUID-SET FOR GUID-HI
3)CRMD-PARTNER--->PASS GUID-SET IN GUID ---TO GET PARTNER-NO
4)BUT000>GIVE PARTENR NO IN PARTNER-GUID->GET PARTNER.
5) CRMD_ORDER_INDEX--->GIVE PARTNER IN PARTNER-NO >GET>OBJECT_TYPE..

GPO to push HKCU regkeys to users that do not have permissions to write to the registry?

We run a 2008r2 domain and mostly Win7 clients, but some are still XP. I need to apply some application settings in an admin template(user), and also need to push a regkey to HkeyCurrentUser for those users. I would like to use GPP for the
regkey, if possible, but the end-users do not have permissions to edit the registry on their computers. Is this something that would have to be scripted? or can I do this through group policy?
I was thinking that the computer side of Group Policy ran under the System account, but that user side ran under the user's security context? This is probably an easy one, but any ideas would be appreciated.
Thanks,
Dan
Dan Heim

Even though users are not admins, some parts of the registry are open for editing. The easiest way to determine if thats the case, is to actually try changing the value when you're logged on to a client as non-admin.
Note that according to: http://support.microsoft.com/kb/2252421, a possibility would also be to change the value as following (that can sometimes help when using both policies and GPP's)
How to deploy the junk email list trigger to the non-policy location in the registry
You can also configure the junk email list trigger in the following non-policy location in the registry:
Key: HKEY_CURRENT_USER\Software\Microsoft\Office\1x.0\Outlook\Options\Mail
DWORD: JunkMailImportLists
Value: 1
Note The 1x.0 placeholder represents your version of Outlook (11.0 = Outlook 2003, 12.0 = Outlook 2007, 14.0 = Outlook 2010, and 15.0 = Outlook 2013)."
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

What's in the Xperia Z2 Box Kuwait?

I was so excited to buy the xperia z2 that I couldn't wait to discover to my dismay that they came bundled with some cheak $2 earplugs and did not include the noise cancelling headset as promised. i felt I was truly ripped off given the cost in Kuwait. Will they replace the headsets or is my fate sealed. Why are we at disadvantage? Will Sony bother to listen!!! I'm paying a fat sum and what do i get in return? Some Nasty earplugs dating back to the Ericsson days!!! After all, this is Xperia Z2.
Can i get these replaced? Barrak International, the sole distributor for Kuwait seems to give a **bleep**!!

Well i didnt get a MAGNETIC CHARGER nor did i get a SMARTBAND or indeed a COVER for the Z2 i did however get the NOISE CANCELLING HEADPHONES.....still in my box unopened to this day........BUT this was not the reason why i purchased the Z2....i purchased it for the Z2 not for any particular extras
As i mentioned & it has been in a few threads....it depends on your Carrier & what part of the World you live in.....no conspiricies or intentional rip offs directed at certain countries....
Enjoy your Z2....that is what your hard earned cash was spent on not any extras......

Can't choose what part of image to print when printing actual size.

I have a pdf file that needs to be printed out to actual size, since the image is a temlate for a part that I need to cut out. Since the actual size is bigger than the paper size, it shows a purple box in the preview box, indicating what part of the document it's going to print. The first time I printed the image, it let me slide the box or the slider below, left to right to select what part of the document on wanted on the paper. But, now it's just locked in place. I'm not sure what changed. Does anyone know how to fix this?
I'm using Windows 7 Pro 64bit, Adobe Reader XI. Printer is a Canon MP495.

Francine, thank you so much for the tips. It took me over two months but I finally got around to trying to take care of this.
I tried your suggestions in order. Steps 1-3 did not fix the problem, but reinstalling from Pacifist did (thank goodness!). Wish I had tried that from the get-go.
Thanks again to everyone for all the suggestions.
There are a couple of things to try:
1. If you haven't done so lately, try Disk Utility
and Repair Permissions. Won't hurt, it's quick and
easy, and there is a remote possibility that it will
help. It actually does occasionally fix something
strange like this.
2. Go to http://www.apple.com/support/downloads/ and
download the COMBO 10.4.8 updater (it is huge, like
148MBs) and run it, then Repair Permissions again.
3. Restart and hold down the Shift key when you hear
the startup chime. This will force the computer to do
a Safe boot. When you see the splash screen saying
"Safe Mode" release the Shift key. The boot will take
longer than normal as the system repairs the disk,
empties font caches, and disables startup items. Not
sure if Image Capture will run correctly with some
Apple startup items disabled, but you can try it.
Restart normally afterwards.
4. You can download Pacifist here:
http://www.charlessoft.com/
It will extract things from your Install disk so you
can install only what you need, in your case Image
Capture.
My Image Capture has never had a problem, so I'm
afraid all I can recommend is these general
approaches. Hope one of them helps.
Francine
Francine
Schwieder
g4 laptop Mac OS X (10.4.8)

How to find out exact what part of a query is being executed?

hi guys,
I can use the following query to see what queries are being executed
SELECT
a.sid, a.USERNAME, a.STATUS, b.sql_text
FROM V$SESSION a INNER JOIN V$SQLAREA b
ON a.SQL_ADDRESS= b.ADDRESS; However, is it possible to get a further breakdown of the query? i.e. see what part of the explain plan is actually being done?
thanks

If you did an event 10046 level 8 trace of the session , you might be able to infer which operation it is in. thanks for that.
>
If all the blocks are in the db_cache there would be no waits on, say, 'db file sequential read' or 'db file scattered read'.
SQL> select * from v$system_event where event like 'db_f%';
EVENT                                    TOTAL_WAITS TOTAL_TIMEOUTS TIME_WAITED AVERAGE_WAIT TIME_WAITED_MICRO
db file sequential read                      1558389              0        5913            0          59131163
db file scattered read                       9755066              0       63353            0         633531239
db file single write                           33173              0         262            0           2619012
db file parallel read                            635              0           6            0             55006Are the above normal for a database that has just had one batch job run on it? Or is it too high and I need to increase my db_cache-size?
thanks

What part of the registry is related to SAPI?

Similar Messages

Maybe you are looking for