What permissions are required to see scheduled tasks on a remote server using SCHTASKS /S {server}?

When I attempt to run SCHTASKS /S {server} some servers return:
ERROR: Access is denied.
On servers where I am a member of the local Administrators group I can run this command successfully. There are many servers where it is not appropriate for me to be a local Administrator but would be fine for me to monitor the status of scheduled tasks
on the server.
What permissions need to be granted to me to see the scheduled tasks and not be a local administrator? Is this even possible?
Thanks,
Matthew

Hi Matthew,
Based on my research, any user can schedule a task on the
local computer and they can view and change the tasks that they scheduled; however, to schedule, view, or change a task on a
remote computer, we must be member of the Administrators group on the remote computer.
Therefore,
What permissions need to be granted to me to see the scheduled tasks and not be a local administrator? Is this even possible
It is not possible.
More information for you:
Schtasks
http://technet.microsoft.com/en-us/library/cc725744(WS.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

What permissions are needed on the client side for RunspaceFactory.CreateRunspace?

Hi.
I am running a remote powershell command from an IIS application to an Exchange server getting the below error. Everything works fine if the IIS application pool identity is in the local administrators group on the IIS server so we can rule out issues with
firewall or anything on the Exchange server. It is a problem with lack of privileges on the local server.
So my question is: What permissions are required on the local server for RunspaceFactory.CreateRunspace? I find good documentation on the permissions required on the server side, but nothing about the client side.
The last Win32 error code after failure is 1008.
An internal error occurred.
at at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager.Initialize(Uri connectionUri, WSManConnectionInfo connectionInfo)
at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager..ctor(Guid runspacePoolInstanceId, WSManConnectionInfo connectionInfo, PSRemotingCryptoHelper cryptoHelper)
at System.Management.Automation.Remoting.ClientRemoteSessionDSHandlerImpl..ctor(ClientRemoteSession session, PSRemotingCryptoHelper cryptoHelper, RunspaceConnectionInfo connectionInfo, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Remoting.ClientRemoteSessionImpl..ctor(RemoteRunspacePoolInternal rsPool, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Internal.ClientRunspacePoolDataStructureHandler..ctor(RemoteRunspacePoolInternal clientRunspacePool, TypeTable typeTable)
at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspacePool..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspacePool(Int32 minRunspaces, Int32 maxRunspaces, RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.RemoteRunspace..ctor(TypeTable typeTable, RunspaceConnectionInfo connectionInfo, PSHost host, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo)

Thanks Daniel.
I see that the IIS server has a GPO setting 'Allow log on locally' to the local administrators group for this server. I will order add of the IIS app pool identity to this list.
I tried the process monitor comparing runs with and without the app pool identity as local administrator. The runs are identical up to the point where one does something useful and the other closes 'HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN'.
There are no failures.
I am not using my runspace objects for multiple threads. I dispose after use.
I will end up with the below if I change. Comments?
public static PowershellResult RunPowerShellCommandExchange2010(string exchangeServer, string command, ICollection<KeyValuePair<string, object>> parameters, string usr, string pwd) {
WindowsImpersonationContext impersonationContext = null;
try {
impersonationContext = WindowsIdentity.Impersonate(IntPtr.Zero);
GetProcessInformation();
try {
var connectionInfo = GetExchange2010ConnectionInfo(exchangeServer, usr, pwd);
using (var runspace = RunspaceFactory.CreateRunspacePool(1, 1, connectionInfo)) {
using (PowerShell powershell = PowerShell.Create()) {
var psCommand = new PSCommand();
if (parameters != null) {
psCommand.AddCommand(command);
foreach (KeyValuePair<string, object> parameter in parameters) {
if (parameter.Value == null) psCommand.AddParameter(parameter.Key);
else psCommand.AddParameter(parameter.Key, parameter.Value);
} else {
//if parameters argument is null the command will be treated as script
psCommand.AddCommand(new Command(command, true));
powershell.Commands = psCommand;
runspace.Open();
powershell.RunspacePool = runspace;
var resultPSObjects = powershell.Invoke();
var psResult = new PowershellResult {
PSObjects = resultPSObjects,
Errors = powershell.Streams.Error.ToList()
return psResult;
} catch (Exception ex) {
var windowsIdentity = WindowsIdentity.GetCurrent();
int errorCode = Marshal.GetLastWin32Error();
if (windowsIdentity != null) throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as user {1} passing executing user {2} due to: {3} at {4}. Server: {5}. Last error code: {6}", command, windowsIdentity.Name, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as unknown user passing executing user {1} due to: {2} at {3}. Server: {4}. Last error code: {5}", command, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
} finally {
if (impersonationContext != null) {
impersonationContext.Undo();
Tore Olav Kristiansen

What file/registry permissions are required to run MultiSim 7 as a regular user?

I want to be able to run MultiSim 7 as a regular user (since our students obviously do not have administrative permissions/rights).
I can't quite figure out what file and registry permissions are required to be able to do this (despite using Filemon and Regmon).

Hi,
If you are refering to the "failed to update registry" warning message, do this:
1. Click Start-->Run
2. Type "regedt32"
3. Locate HKEY_Classes_Root/Multisim.Document
4. On the menu, select Security-->Permission (win 2000), For XP select Edit-->Permission
5. Give full control for everyone
6. Repeat step 3-->5 for:
HKEY_Classes_Root/CLSID/{2D964073-9BC9-11D1-840B-006008AC6551}
Regards,
Tien Pham
EWB Support
Tien P.
National Instruments

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

What steps are required to configure the Payroll Tax ( USA)?

Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.K

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

What roles are required to use Guided Procedures?

Hi ,
What roles are required to use Guided Procedures?
Thanks
Srinivas.K

Hi,
Refer this block https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
Thanks,
satheshkumar.R

What modifications are required to make a servlet support SSL data encrypti

Hi,
What modifications are required to make a servlet support SSL data encryption?
--kumar

Hi,
What modifications are required to make a servlet
support SSL data encryption?
--kumar No modifications are required in servlet. You have to setup servlet container.

What locks are required on a table when Oracle is processing an UPDATE

What locks are required on a table when Oracle is processing an
UPDATE statement?

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
What locks are required on a table when Oracle is processing an
UPDATE statement?
>
Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
>
Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
>
The above describes the locks when you, the user, tells Oracle to lock the row.

What amps are required to charge an iPhone 5s

what amps are required to charge an iPhone 5s

watt = amps *volt
this mean
amps = watt / volt
the ac charger is 5Watt and 5volt
so 1 amp
but the phone also charge at usb which in some cases is 5volt 0.5amp == 2.5watt
are you looking for how further down then 0.5 amps you can go ?
the lower the amps the slower it charges

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?

To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck...

GRID Control Server (OMS) - what services are required?

What services are required (and what is the startup order) on the Windows 2003 GRID Control Server (OMS). The target database is 10g on Solaris.

Hi.
I assume that you have three folders in the oms installation folder, called oms, agent and db.
You should first start the grid database on the 2003 server along with the listener from the db folder.
Than you should install the application server processes by running:
opmnctl startall from the oms\opmn\bin - folder.
Than you should start the agent by runnint agent\bin\emctl start agent
You should further start the agent on the Solaris node and verify the upload to oms:
$ORACLE_HOME/bin/emctl start agent
$ORACLE_HOME/bin/emctl status agent
Good luck
rgds
Kjell

Hyperion Planning Fusion Edition, what components are required?

Hello,
Currently we're planning to install Hyperion Planning Fusion Edition, but we're not certain what components are required if we want to use Planning with EPMA/BPMA. Can someone post a list of components/applications required?
Additionally, where from can we download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition, v11.1.1.1.1? The documentation states that such a version exists, however we're unable to locate it on Oracle's web pages.
Thank you
Regards
Marcin Stawny

Hi,
You will need the following :-
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.1.0
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.1.0 - Part 1-3
Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.1.1.0
Oracle Essbase Client Release 11.1.1.1.0
Oracle Essbase Server Release 11.1.1.1.0
Oracle Hyperion Provider Services Release 11.1.1.1.0 (if you want to use SmartView)
Oracle Hyperion Planning, Fusion Edition Release 11.1.1.1.0
Oracle Hyperion Smart View for Office , Fusion Edition Release 11.1.1.1.0
You can find the files on Oracle edelivery or here
Cheers
John
http://john-goodwin.blogspot.com/
John

What Files are required to install R12 VISION with out Express selection???

Hi,
I had installed R12 before, and i could nt received any error. installation was OK,
Now i am installing in same way on diffrent machine now i am getting error
E:\oracle\....\visdb\....\temp\oradun91.cmd (Some thing like that). I think i have missed some files.
this error come at setp 1 of 5.
when 91 files unzipped successfully.
I want to know which file is missing. LOG file does not shows the name of missing of folder or directory name.
What Files are required to install R12 VISION with out Express selection on Windows server 2003.
so that i extract that file again.....
thanks a lot
regards.
kalash

Please check the following log files for any further details about the error:
1) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>.log
2) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/dbInstall.log
I assume you are using the same Stage area, so it should work fine no matter what instance you are trying to install.
What Files are required to install R12 VISION with out Express selection on Windows server 2003What do you mean by missing and required files? As stated above, you should have the complete stage area staged properly.

What ports are required to be open on a firewall for UCCX ver7 Backups

I'm trying to setup a backup location on UCCX version 7.
The backup storage location and the UCCX server are seperated by a firewall.
What ports are required to be opened on the firewall to allow the backups through to the backup location.
Can't find any info online

Try it locally on the server itself.
You just need to create a shared directory backup oon the server on C:\ drive.
\\127.0.0.1\C$\backup
This should work.
Link to port utilization guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
Regards,
Chuck
Please rate helpful posts and identify correct answers.

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

What permissions are required to see scheduled tasks on a remote server using SCHTASKS /S {server}?

Similar Messages

Maybe you are looking for