What plug-in do I need to import file from scanner to make a batch job

what plug-in do I need to import file from scanner to make a batch job

Hi Atul,
I`m having PS Elements Ver.13 and scanner Epson V500 Photo.
Nice if your can help me.
Sten

Similar Messages

What plug in do I need to open files in virtual pc xp mode on windows 7?

I am unable to open CS 2 In Design files in virtual pc xp
mode on windows 7 - even tho it says I should be able to.
It says under 'content manager' check for the right plug ins
or upgrade to the latest version of in design.
What plug in do I need?
Or should I send windows 7 professional with xp mode back??

More than likely these are CS3 or later files and the latest version you have installed is CS2. Without a newer icon handler from a more recent version, the CS2 icon will be displayed for anything newer than CS, and Windows itself has no clue that any version of ID other than the last one installed is associated with the file type.
As Jongware points out, this is the typical error for trying to open a newer version file.

What kind of adapter i need to transfer file from an imac hardrive tiger to an imac leopard

what kind or brand of usb adapter i need to transfer file from an imac hardrive tiger to an imac leopard

Hey arturojas!
Here is an article that might help you achieve this goal:
Mac Basics: File Sharing
http://support.apple.com/kb/ht1549
You could also transfer files directly using target disk mode:
Mac OS X 10.6: Transferring files between two computers using FireWire
http://support.apple.com/kb/PH6815
Thanks for using the Apple Support Communities!
Cheers,
Braden

Can Encore 2.0 import file from Windows Movie Maker?

I have just purchased and installed Encore 2.0, so I am a true novice. I have a few movies I created using Windows Movie Maker and wanted to import them into Encore 2.0; however, when I try to do so I get a message telling me that "the software used to decode is not available on this system." Is there away for me to fix this problem, or is Encore not capable of importing these files?
Thanks for any help!!!

Actually, Encore does support WMV files. I just imported an AVI into Movie Maker and exported it as a WMV file at the default settings and it imported fine into Encore.
Apparently there's something about the WMV files in question that Encore doesn't like, however. From the error message I'd suspect that the codec used to export the file is missing. Is the system you're running Encore on the same system you used to export from Movie Maker? If not, you might want to try loading your Movie Maker project files onto the same system and re-exporting them. Also double-check that the settings for the exported movie correspond to a legal video format (although you'd probably get a different error message if that was the cause).
- Larry
Encore DVD QE

HT2518 Need to import files from PC. Not enough space on old PC to down load migration assistance.

First of all, please be patient with me as the Mac is new to me and I'm trying, but old PC habits die hard. Ok I can't download Migration Assistant on to my old PC as there is no room. Trust me, it won't do it. So I've got most of my files, music,etd. on an external hard drive and need to transfer to my Mac. I've plugged the USB cord in, got the icon under devices on Finder, but can't find a "select all" button/choice to move them. I can do the photos, (had to do them in small groups with highlighting and dragging - there must be a better way!) but can't get files to go. They are for the most part MS office/excel. Can someone help me?

Hi MtM,
I am sorry about your problems. The issues here are that FC does not use MPEG streams for editing video these are highly compressed formats which will look poor when compressed out again. However I have successfully downloaded video from Sony's DVD cam before. Its not as "quick" as plugging your cam in via Firewire, but it works.
You need a utility call DVDxDV I think it's $30 or so, or you can use another one called Handbrake which is shareware and works pretty well. Both of these utilities will allow you to import the VIDEO_TS and AUDIO_TS folders from a DVD that is not copyprotected - such as like your camera's disc. Import the footage as DV streams and then import those in FC.
This is what I did, and it worked fine. The only problem you may have is getting the disc into your MB which is a slot-loading computer - you will need a disc ring that fits over the small DVD's to make it the size of a standard DVD - I forget what they're called... (Just be careful when doing that, make sure the disc doesn't fall apart in the drive...)
Or - if you can connect your camera to your MB via USB and see the contents of the disc, you'll be fine. Just tell DVDxDV "where" to find the VIDEO_TS folder.
Hope this helps.

What plug in do i need for cs5 to open nikon 5200 raw files?

What plug in do I need in cs5 to open Nikon 5200 raw files?

There's no direct support for your camera in CS5.
It would require ACR 7.3 or higher, which only work with CS6.
You can download and run the free Adobe DNG Converter 7.4 to convert your raw Canon files to raw DNGs which you can then open in CS5.

Avi file plug in for divx. what plug in do I need?.

I have no sound in avi files and get a message that I need a plug in for divx. what plug in do I need?.

I have both of these applications installed on my apple. Both the player and converter. I used MPEG Streamclip to convert a .mov file recorded on my iphone to an .avi file for playback on an internet website. After the file is converted there is no audio and I get an error message stating:
"You may need an additional video decoder to play this file.
This file contains a track in an unknown format (code ""). You may need to install a QuickTime™ component for this video format in order to play this file."
I purchased the pro version of divx to see if this addressed the issue but it did not. I'm concerned the pro version of flip 4 mac will be the same at $30.00 more dollars. Is MPEG Streamclip the problem?

I need to import data from a CSV file to an Oracle table

I need to import data from a CSV file to an Oracle table. I'd prefer to use either SQL Developer or SQL Plus code.
As an example, my target database is HH910TS2, server is ADDb0001, my dB login is em/em, the Oracle table is AE1 and the CSV file is AECSV.
Any ideas / help ?

And just for clarity, it's good to get your head around some basic concepts...
user635625 wrote:
I need to import data from a CSV file to an Oracle table. I'd prefer to use either SQL Developer or SQL Plus code.SQL Developer is a GUI front end that submits code to the database and displays the results. It does not have any code of it's own (although it may have some "commands" that are SQL Developer specific)
SQL*Plus is another front end (character based rather than GUI) that submits code to the database and displays the results. It also does not have code of it's own although there are SQL*Plus commands for use only in the SQL*Plus environment.
The "code" that you are referring to is either SQL or PL/SQL, so you shouldn't limit yourself to thinking it has to be for SQL Developer or SQL*Plus. There are many front end tools that can all deal with the same SQL and/or PL/SQL code. Focus on the SQL and/or PL/SQL side of your coding and don't concern yourself with limitations of what tool you are using. We often see people on here who don't recognise these differences and then ask why their code isn't working when they've put SQL*Plus commands inside their PL/SQL code. ;)

What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro? I need to transfer files from the old hard drive to the new computer.

What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro? I need to transfere files from the old hard drive to the new computer.

No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
synghem wrote:
Thank you LowLuster,
At the apple store they said I needed an esata to usb wire. But looking at wires on line has been confusing. Is sata the same as esata? How do I know if I need a usb 3 or usb 2?

HT1386 Syncing new iphone 5 with a mac with itunes 10.6.3. Error message says iphone cannot be used because requires itunes 10.7 or later. Unable to download Itunes 10.7 mac. What do I have to do to import songs from Mac to new Iphone 5 ?

Syncing new iphone 5 with a Mac with itunes 10.6.3. Error message says iphone cannot be used because requires itunes 10.7 or later. Unable to download Itunes 10.7 to Mac. What do I have to do to import songs from Mac to new Iphone 5 ?

iOS 6 (which runs on the iPhone 5) requires iTunes 10.7, which requires OS X 10.6.8 or higher.
Upgrade OS X on your Mac.

What firewire cable do I need to transfer data from a 2010 macbook to 2014 macbook

What firewire cable do I need to transfer data from a 2010 macbook to 2014 macbook

You would need a Firewire 800-800 (9-pin) cable and a Thunderbolt to Firewire adaptor.
Matt

I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Do I need to upgrade both LR 5.7 and Camera Raw 8.7 to import files from Canon 7dMark2? or is LR 5.7 enough or is camera raw 8.7 enough

Do I need to upgrade both LR 5.7 and Camera Raw 8.7 to import files from Canon 7dMark2? or is LR 5.7 enough or is camera raw 8.7 enough

Lightroom is a complete stand alone program and does not require you to have any other Adobe product on your computer.
Adobe Camera Raw is a plugin for Photoshop CS and is not require by Lightroom nor is it used by Lightroom.
However if you are using both Lightroom 5 and Photoshop CS6 /Photoshop CC and wish them to 100% compatible then you will need to update the ACR Plugin in Photoshop.
Lightroom 5.7 will work fine with your Canon 7dMk2. (Its internal processing engine is the equivalent of ACR 8.7)
To wit LR 5.7 is an alternative to ACR 8.7 Plugin in Photoshop, you do not necessarily need both.

Running on a mac osx 10.7.5 and need to import video from a dvd to edit on final cut X

running on a mac osx 10.7.5 and need to import video from a dvd to edit in on final cut X

I'd try Handbrake. Copy the Video_TS file from the DVD to the Desktop. Then use Handbrake to convert the file compatible with Final Cut X

Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

Hi, I need to import contacts from windows outlook to MAC outlook. I need the field mapping document between windows and mac outlook.

Then I suggest you post your question the Microsoft Mac forums since it's their products you're having trouble with
http://answers.microsoft.com/en-us/mac

What plug-in do I need to import file from scanner to make a batch job

Similar Messages

Maybe you are looking for