What port do I use in setting a FrameMaker CMS connection to a SharePoint site?

I can connect to our corporate SharePoint site to a top level directory but I can't drill down to subdirectories. I do have the proper permissions since I can see all of the directories through our SharePoint site. I can add/delete/rename etc. using the SharePoint interface. I am trying to connect to a subdirectory on our SharePoint server that contains FrameMaker files. When I enter the domain, username, password, etc., it does connect but only to the top directory level and I can't drill down to subdirectories. I was wondering is there anything else I need to do in setup such as a port number. I have my CMS configuration setup with no port number. When I had a local SharePoint server this worked just fine and I could drilldown to any subdirectory.
I have put the entire URL to the subdirectory but it does not let me connect I get a 404 error. It does let me connect to the top level directory but, as I said, I can't drilldown to where the FM files reside.

Not sure if it would help, but it's worth asking: When you provide your user name, do you include the domain (e.g. mydomain\myusername)?

Similar Messages

What have you found useful after setting up new solutions?

I have a general question about the setup of new solutions in Solution Manager. At Tech Ed, one of the SAP reps mentioned that all of the production systems related to a process should go into one solution. What does that really mean?
We have an ECC system for the financials with some of the reporting being completed in BI? So should I create one solution that includes the ECC-PRD and the BI-PRD system? Or should all of the DEV-QAS-PRD systems be place into one big solution so we can coordinate support packages and transports?
I apologize for such a general question but I wanted to see what others have found useful after setting up their solutions.
Thank you for your time.
Joe Haynes
Denver, CO

Hi Joe,
I am not sure whether I understood your question correctly or not. If you were asking about creating solutions(DSWP), then there are different ways of doing it . I dont know about SAP recommendation though.
One is Creating a solution for each of your PRD,QA and DEV. Create a solution called PRODUCTION and your all production systems into it ( in your case, your ECC PRD and BI PRD ) . The same process for QA and DEV.
Other way is Creating a solution for each landscape i.e create an ECC solution and add your ECC PRD ,DEV and QA into it. BI solution and add BI systems to that.
Thanks
Prince Jose
Message was edited by:
Prince Jose

How do i find what ports are being used.

I need to know how to tell what ports are being used and by what. I recently bought Apple Remote Desktop and have been pretty impressed but I have one computer here that won't let me Observe or Control. I think it is because the G4 in question has a program using port 5900. I need to confirm this is there any way that I can see if this port is being used?
Thanks
Moderith

Hi Moderith--
Welcome to the Apple Discussions.
Look in your Utilities folder for the Network Utility program. Open it, and choose "Port Scan" from the row of tabs in its window. If you're not running Network Utility on the problematic G4, use the G4's IP address. But if you're actually on the G4, use "localhost".
Note that if you check the open ports on the G4 from another computer, you won't see as many as if you check it from the G4 itself. That's because some ports are only local. For example, I have enabled the mail server on my Macs, but only to deliver mail, not relay it. So if I do a port scan using "localhost", I see port 25 open, but it's not open from another computer.
charlie

What port numbers are used when creating temporary queues

Using the following code as an example, what port(s) are used when creating temporary queues? Is it a range of ports? Is it random? And is it configurable? If you have any insight on this, please let me know. Thanks.
QueueConnection con = connectionFactory.createQueueConnection();
QueueSession session = con.createQueueSession(true, Session.AUTO_ACKNOWLEDGE);
TemporaryQueue replyQueue = session.createTemporaryQueue();

The only ports I know about are the defaults ports:
JMS 7676
IIOP 3700
Are these the only ports that are used, even for temporary queues?

What ports does icloud use for mail?

What ports does icloud use for mail?

Read > http://support.apple.com/kb/HT4864 iCloud uses 993 for IMAP and 587 for SMTP

I have set home page, what option do I use to set new tabs to open as home page?

I have set home page default. What option do I use so that new tabs open as home page?

You can look at this extension:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/

CUP user import: what XML field to use to set default ACLs for user?

Can someone please tell me what XML tags to use within the import file (via CUP) to set the default Document and Folder ACLs respectively to Public and Protected.
Thanks!
Brian

brian,
did you ever figure out how to assign default ACL to a user using XML? if so, could you show me how to do it? thanks

What port number is used for SMTP outgoing mail with AOL?

I inadvertently changed the port number for SMTP outgoing mail of AOL. What port number should I use?

Yahoo and Gmail support should be able to help you.
Not related to Firefox support, web mail doesn't use POP or SMTP protocols which is what email clients such as Thunderbird use for communicating with email servers.

What port should my email be set on?

What port should my Mac mail be set on? Mine says "995" but my email provider at Comcast states other settings such as "587" or "465".

I did --that is where they said "587" or "465" but they don't state whether they are incoming, outgoing or whatever. Do I change the number on the Mac Mail port to one of those numbers? Maybe I will just email Comcast & ask them. Thanks

What Ports Are Blocked using my Wireless Card

Can someone tell what ports are beeing Blocked by Verizonwireless when using my Wireless Card? Also, how do I get one open for example port 4444?

i don't think that the url blocking should block any ports ... however , if its doing this .. you may need to upgrade / reflash the router's firmware .. after the upgrade , reset and reconfigure the router ..

What port number to use with NTRealm

When I configured the NTRealm in the WLS console, the documentation mentioned that for NT Domain, I was supposed to provide the "name" and "port" values for the PDC machine. I gave the name of the machine on that field, but did not know what to specifiy as the "port" value. Now, when I run the "java weblogic.security.ntrealm.NTRealm..." command, I get an "Unable to adjust token privileges" exception, below which there is another exception with the words "bad domain name" in it.
That leads me to believe that its not liking the DNS name of the PDC server that I entered earlier. Can someone tell me what is this "port" value that is referred to in the docs?
Thanks.

You shouldn't have to enter a port number for the PDC. Could you point out
in the documentation where you saw this.
It should only be:
java weblogic.security.ntrealm.NTRealm user password your_PDC
Are you sure you are logged into your domain? Is that user part of the
domain? If you use an admin account for the PDC does it work?
Patrick
"Nadeem" <[email protected]> wrote in message
news:3cd96658$[email protected]..
When I configured the NTRealm in the WLS console, the documentationmentioned that for NT Domain, I was supposed to provide the "name" and
"port" values for the PDC machine. I gave the name of the machine on that
field, but did not know what to specifiy as the "port" value. Now, when I
run the "java weblogic.security.ntrealm.NTRealm..." command, I get an
"Unable to adjust token privileges" exception, below which there is another
exception with the words "bad domain name" in it.
>
That leads me to believe that its not liking the DNS name of the PDCserver that I entered earlier. Can someone tell me what is this "port"
value that is referred to in the docs?
>
Thanks.

My source content is in different resolutions, what settings do I use to set my project up?

I have 3 types of input:
1) H.264 720x568 25fps AAC 48kHz Stereo (though for some reason it says "NTSC 1080p in the info panel for these clips)
2) H.264 1440x1080 25fps
3) Motion projects, which I can obviously set up at whatever resolution I need to
The final exported footage once the project is complete will be used in a variety of formats:
- streamed online
- viewed on a Mac in Quicktime (on a standard monitor, and then via secondary screen onto HD TV)
- iPad
Please could someone advise on how I'm best to go about choosing a project setting (resolution, frames etc) so I can create the project at the correct resolution in FCP Pro X, and also in Motion 5
Thanks in advance
Rob

Thanks Tom
Majority will be the HD, so presuming you're going to tell me to set it up in HD format and then just drop the standard def stuff into that and suffer the degredation? Are the options either to stretch it or zoom & crop
Wasn't sure what you meant about converting AAC to 48k audio... how do I do that? I think I'm getting confused because inspector tells me Codecs: H264 and AAC, but audio sample rate tells me 48kHz (for the same clip?).
Also, what's the best way to get Motion stuff into FCP? Would ProRes 4444 be best?
Thanks again
Rob

What application do you use when setting mailto "outlook 2013"

I'm trying to set outlook 2013 as my default "mailto" What application do I use

Is it part of Office 2013 on your computer, or the online version?
For the version that installs locally, you should be able to follow the steps in this article: [[Change the program used to open email links]].
For the online version, you might need a URL to the compose page from Microsoft -- or perhaps it has been posted here before -- because Firefox may not be able to discover this information in the registry.

What server do I use? setting up E-mail account on Mac computer

Okay, i keep getting this message that my outgoing mail didn't go through. I'm kinda of server illierate (sp.)
Im not using Mobile me account and I don't want to use it mobile me either.
Which one do I use? POP,IMAP,SMTP?
I don't want to pay MOBILE me to set up for Mail in my mac computer. I want to set up mainstream email account for my Mac only. TO SENT PICTURES AND STUFF.
I already have yahoo and hotmail account.
Incoming Mail Server and Outgoing Mail SErver, do I use the same one e.i. [email protected]
Help me with my mail set up process. I already set it up and i didn't do it right.
thanks for reading my message.

Im not using Mobile me account and I don't want to use it mobile me either.
OK. No problem. It isn't required.
Which one do I use? POP,IMAP,SMTP?
You use whatever your email provider uses. SMTP is the standard for outgoing mail, with POP and IMAP used for incoming mail. Most providers support both options, some only support one or the other. You'll need to check with your mail provider to determine which is appropriate for you.
I don't want to pay MOBILE me to set up for Mail in my mac computer. I want to set up mainstream email account for my Mac only. TO SENT PICTURES AND STUFF.
OK. We've already ascertained that MobileMe is not a requirement here.
I already have yahoo and hotmail account.
OK, that's a start. You can configure Mail.app with either of them, or both if you prefer.
Incoming Mail Server and Outgoing Mail SErver, do I use the same one e.i. [email protected]
[email protected] is not a valid server address. That is your email address.
You'll need to check with Hotmail what their SMTP server address is (their help section is so awful I couldn't find it before I had to go shower to get clean).
For Yahoo, they have a help page on enabling POP access to your mailbox, along with the relevant entries you'll need to put in your mail client.

What values can be used to set the SI_PROCESSINFO.SI_LOCALE?

Post Author: Nadine
CA Forum: Other
In the following VBA program, the SI_Locale property gets set when a WEBI report gets scheduled as a PDF (Webi.ProcessingInfo.Properties.Add "SI_Locale", "fr" ). What are the values that can be set for this property?
Do they conform to an ISO standard?
' [VBA; BOE XI R2; COM SDK; SP2 FP24] Dim Mein_Info_Store As CrystalInfoStoreLib.InfoStore Set Mein_Info_Store = Info_Store Dim Query As String Query = "Select TOP 1 * " & _ "From CI_INFOOBJECTS " & _ "Where SI_NAME = 'International'" Dim Liste As CrystalInfoStoreLib.InfoObjects Set Liste = Mein_Info_Store.Query(Query)
Dim Info As CrystalInfoStoreLib.InfoObject Set Info = Liste.Item(1) Dim Webi As CrystalWebiPluginLib.Webi Set Webi = Info.PluginInterface("WebI") Dim Plan As CrystalInfoStoreLib.SchedulingInfo Set Plan = Webi.SchedulingInfo Dim Verarbeitung As CrystalInfoStoreLib.ProcessingInfo Set Verarbeitung = Webi.ProcessingInfo Dim Eigenschaften As CrystalInfoStoreLib.Properties Set Eigenschaften = Verarbeitung.Properties Webi.WebiFormatOptions.Format = CrystalWebiPluginLib.CeWebiFormat.ceWebiFormatPDF Plan.Type = CrystalInfoStoreLib.CeScheduleType.ceScheduleTypeOnce Plan.BeginDate = Now Plan.RightNow = True On Error Resume Next Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "es" Webi.Title = "International_PDF_Spanisch" Mein_Info_Store.Schedule Liste Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "fr" Webi.Title = "International_PDF_Französisch" Mein_Info_Store.Schedule Liste Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "en-GB" Webi.Title = "International_PDF_Englisch" Mein_Info_Store.Schedule Liste Eigenschaften.Delete "SI_LOCALE" Eigenschaften.Add "SI_LOCALE", "en-US" Webi.Title = "International_PDF_Amerikanisch" Mein_Info_Store.Schedule Liste

Hi
In addition to John's answer, inside Discoverer you can do this:
Let's assume you have a Status item and it has the values you mention. If you create the following new calculation SUM(ROWNUM) and name it Status Count you only need to include the Status and the Status Count in the worksheet. You will now see a count for each status.
Best wishes
Michael

What port do I use in setting a FrameMaker CMS connection to a SharePoint site?

Similar Messages

Maybe you are looking for