What ports are needed to fully utilize Apple TV

The ports that i know of so far that need to be enabled are below, does anyone know of any other ports that need to be enabled for the Apple TV to fully be utilized (Airplay Mirroring, home sharing, etc.) Thanks for any and all assistance!!!
80 - TCP (HTTP)
123 - TCP/UDP (Time Server)
443 - TCP (https)
554 - TCP/UDP (rtsp)
3689 - TCP (daap)
5353 - UDP (mdns)

There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (if you are using the Apple TV 2)

Similar Messages

Apple SU Server behind firewall: What ports are needed?

From what I can see the only needed port is 8088; does this encompass the client getting everything it needs from the SUS, or do the more standard ports 80/443 need to be opened up as well? I am trying to get my ducks in a row before making the request to our network engineers to have the ports opened up.

John,
Scroll down in the list till you get the TCP Ports,
that has the information you are looking for:
Novell Documentation
Rainer

What accessories are needed to connect my Apple TV to my LCD projector (VGA connectors) in the classroom so that I can mirror my iPad for around the class teaching?

I have been wanting to project my iPad to my class and the only way I have found is to use the connector. However, I would like to remove myself from in front of the classroom and move around the classroom. This encourages students to take notes and not pass notes. This also encourages them to engage in questioning of the lesson, because the teacher is not far removed from them if they're in the back of the classroom. How can I connect? I've read some forums that discuss converters and many who say it needs to be active or powered, but some of these powered converters are nearly two times the amount of the Apple TV. I wouldn't mind paying if this is the suggested way and it works. I don't want to go through several failed and expensive experiments.

There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p (if you are using the Apple TV 2)

How do i find what ports are being used.

I need to know how to tell what ports are being used and by what. I recently bought Apple Remote Desktop and have been pretty impressed but I have one computer here that won't let me Observe or Control. I think it is because the G4 in question has a program using port 5900. I need to confirm this is there any way that I can see if this port is being used?
Thanks
Moderith

Hi Moderith--
Welcome to the Apple Discussions.
Look in your Utilities folder for the Network Utility program. Open it, and choose "Port Scan" from the row of tabs in its window. If you're not running Network Utility on the problematic G4, use the G4's IP address. But if you're actually on the G4, use "localhost".
Note that if you check the open ports on the G4 from another computer, you won't see as many as if you check it from the G4 itself. That's because some ports are only local. For example, I have enabled the mail server on my Macs, but only to deliver mail, not relay it. So if I do a port scan using "localhost", I see port 25 open, but it's not open from another computer.
charlie

HT204406 What ports are used by iTunes Match?

What ports are used by itunes Match? I need to change my router settings.

Good question. The standard document is still mentioning MobileMe, rather than iCloud.
TCP 5223 looks significant ... but the a close check through the rest of the following document might also be prudent:
Well known TCP and UDP ports used by Apple software products

What ports are required to be open on a firewall for UCCX ver7 Backups

I'm trying to setup a backup location on UCCX version 7.
The backup storage location and the UCCX server are seperated by a firewall.
What ports are required to be opened on the firewall to allow the backups through to the backup location.
Can't find any info online

Try it locally on the server itself.
You just need to create a shared directory backup oon the server on C:\ drive.
\\127.0.0.1\C$\backup
This should work.
Link to port utilization guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
Regards,
Chuck
Please rate helpful posts and identify correct answers.

What do I need to fully connect iPhone 5 to Mini Cooper Connect?

I was told by the Mini dealership that my 2013 Mini is not compatable with my iPhone 5. What do I need to fully connect the two?

If Mini tell you they are not compatible they probably aren't

Database Link - What ports are used?

I am attempting to create a database link from a very locked down server (Database A) to Database B which is on my internal network.
Can someone tell me what ports I need to open in the firewall for a database link to work correctly? My Database B instance is a XE instance running on the default port 1521.
Thanks,

avalanche333 wrote:
I am attempting to create a database link from a very locked down server (Database A) to Database B which is on my internal network.
Can someone tell me what ports I need to open in the firewall for a database link to work correctly? My Database B instance is a XE instance running on the default port 1521.
Thanks,Hans and Devotee have given you the best info so far. I'd like to expand and clarify slightly on their comments.
There is really nothing special about a db-link. It is just another client process, being used by the 'client' database. It uses exactly the same networking pieces as does sqlplus on the same machine. All of the same considerations are there ... tnsnames.ora on the client machine matching up with the listener configuration on the target machine, listener ports, port redirection for establishing the actual server process, etc. I would start by getting a sqlplus connection working. When you have that, you know you have all of your network configuration issues resolved. At that point any issues you have with the dblink will be in the link definition itself.
And as Hans pointed out, databases don't run on port 1521. It is a conceptual mistake to think of the database as "running" on any port. By default the listener uses port 1521 to listen for connection requests. The database knows nothing about that. It is also very easy, and not that uncommon, to configure the listener to use another port instead of or in addition to 1521, so it is also a mistake to treat port 1521 as if it were some immutable value.

RFC: What Ports are used

We are trying to establishing a connection from ECC6.0 to a cFolders System. The Systems are in different LANs but are able to reach each other. For security reasons we have to open ports that are used by RFC. Can anyone tell me what ports are used by RFC?
Thanks!

hi
you need to use FILE Port.
Regards,
Hakim

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV-.

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV….

About AirPlay Mirroring in OS X Mountain Lion
You need:
An AirPlay-enabled device such as http://store.apple.com/us/ipod/ipod-accessories/apple-tv
A suitable TV monitor
A network
HDMI cable
A compatible Mac:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Or, depending on the model Mac you intend to use: a Thunderbolt or MiniDP or DVI to HDMI adapter for a wired connection to your TV or AVR

What ports are blocked with Homefusion

I am trying to figure out what ports are blocked on the homefusion service.

There is no official list of blocked ports for HomeFusion or any of the other VZW products. All products are treated the same way. The NAT firewall on VZWs new LTE network is responsible for blocking internet communication as well as hiding public IP Addresses. No manual configuration of the devices themselves will allow you to work around the issue. In truth it would be easier to create a list of the allowed ports but we don't have one of those either.
A rule of thumb is that you should assume any custom or unusual ports are blocked. Even the less popular mainstream ports are blocked some times. Only the major mainstream public ports are normally available. You have to test out your applications to know for sure if they work. If you have a laptop then stop by a VZW store and use one of their devices to test if it works before you buy.
Also, anything depending on Public IP Addresses is broken on the new LTE network. Some common examples are VOIP phones, Xbox hosting, IP security cameras, etc. If you need remote access to your local network then forget about it.
The work around to blocked ports and Public IPs are as follows:
1. Setup a VPN to connect to a network where the ports are open
2. Purchase a static IP Address from VZW for $500.00
3. Use a different ISP
VZW does not make exceptions for port blocking. You have to work around them or get by without them.

What Ports Are Blocked using my Wireless Card

Can someone tell what ports are beeing Blocked by Verizonwireless when using my Wireless Card? Also, how do I get one open for example port 4444?

i don't think that the url blocking should block any ports ... however , if its doing this .. you may need to upgrade / reflash the router's firmware .. after the upgrade , reset and reconfigure the router ..

What do I need to connect my apple cinema display to new macbook pro

what do I need to connect my apple cinema display to new macbook pro?

2011 macbook pro with TB -> apple 27" Cinima Display with mini-displayport
Does this work natively? Is there an adapter or workaround?
No, not until or if an adaptor becomes available. See this thread.
Apple display and Thunderbolt compatibility

How do I determine what xtras are needed?

From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?

Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+

What wires are needed to connect to a projector

What wires are needed to connect a macbook to a projector

A VGA or HDMI cable (Perferably HDMI). But you need mini-displayport connectors to the specific cables.

What ports are needed to fully utilize Apple TV

Similar Messages

Maybe you are looking for