What ports are required to be open on a firewall for UCCX ver7 Backups

I'm trying to setup a backup location on UCCX version 7.
The backup storage location and the UCCX server are seperated by a firewall.
What ports are required to be opened on the firewall to allow the backups through to the backup location.
Can't find any info online

Try it locally on the server itself.
You just need to create a shared directory backup oon the server on C:\ drive.
\\127.0.0.1\C$\backup
This should work.
Link to port utilization guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
Regards,
Chuck
Please rate helpful posts and identify correct answers.

Similar Messages

What ports do I need to open on my router for iChat AV?

What are they ports that need to be opened? (Range) I am using a linksys router..

Hi Ralph,
I am sorry, but UPnP is automatically enabled on my Netgear 834G but still won't make it work.
I've disabled the internal Firewall in 10.4.6 and also opened all ports on the router (1024-65535) for both outbound and inbound. I've trashed all pref files in /Library/Preferences. Yet I have still failed to connect to an AIM user.
If I disconnect the router and plug in an old D-Link ADSL modem it works striaght away for iChat and AIM users without a fail.
Any help appreciated!
Thanks,
M

What ports are required to run facetime from iPad2 ?

My iPad 2 works fine, but trying to use Facetime with an iPhone in or outside the house fails with no error message.
This seems to do with ports of a firewall, but don't know the adequate details.

Try it locally on the server itself.
You just need to create a shared directory backup oon the server on C:\ drive.
\\127.0.0.1\C$\backup
This should work.
Link to port utilization guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
Regards,
Chuck
Please rate helpful posts and identify correct answers.

SCCM 2012 What Ports Do I need to open so DMZ servers can communicate with my SCCM Server?

Hi,
What ports do I need to open in the firewall so my DMZ servers can talk to my SCCM server on the network?
Here are my steps before to make my DMZ servers talk to my SCCM server:
1. On my SCCM 2012 SP1 CU2 I have bounderies installed --> I install SCCM Client on my DMZ server with the appropriate switches --> I go back to my SCCM server to approve the server --> Works
But now my DMZ servers stops getting definition updates from my SCCM server and I was suggested that it is much easier to open ports in DMZ.
Now, could you please tell me what ports should we open to ensure two way communication among servers?
Thanks!

Yes and no. It's a bit muddy at times.
For Internet based clients, putting an Internet-enabled MP in the DMZ is perfectly acceptable because Internet clients will only choose MPs enabled for Internet communication.
For systems in the DMZ, that's where it really gets muddy. There's no perfect way to accomplish this. IMO, DMZ clients should be allowed to go back to the MP/DP in the Intranet with a targeted opening in the DMZ firewall rules that allows them to only go
to the internal MP. That's a security policy question though for your organization.
Another option is to treat the clients in the DMZ as Internet only clients. This way, they will only go to the Internet MP in the DMZ. You do lose some functionality though like Remote Control.
A final way is to actually put an MP/DP in the DMZ and deal with the timeout's that happen when clients try to talk to the MP in the Intranet. Clients will try 5 times to contact that MP before giving up. They try to find a new MP at the following times
(which are not configurable):
- Every 25 hours
- WHen the client detects a network change
- When the client agent starts
Jason | http://blog.configmgrftw.com

Database Link - What ports are used?

I am attempting to create a database link from a very locked down server (Database A) to Database B which is on my internal network.
Can someone tell me what ports I need to open in the firewall for a database link to work correctly? My Database B instance is a XE instance running on the default port 1521.
Thanks,

avalanche333 wrote:
I am attempting to create a database link from a very locked down server (Database A) to Database B which is on my internal network.
Can someone tell me what ports I need to open in the firewall for a database link to work correctly? My Database B instance is a XE instance running on the default port 1521.
Thanks,Hans and Devotee have given you the best info so far. I'd like to expand and clarify slightly on their comments.
There is really nothing special about a db-link. It is just another client process, being used by the 'client' database. It uses exactly the same networking pieces as does sqlplus on the same machine. All of the same considerations are there ... tnsnames.ora on the client machine matching up with the listener configuration on the target machine, listener ports, port redirection for establishing the actual server process, etc. I would start by getting a sqlplus connection working. When you have that, you know you have all of your network configuration issues resolved. At that point any issues you have with the dblink will be in the link definition itself.
And as Hans pointed out, databases don't run on port 1521. It is a conceptual mistake to think of the database as "running" on any port. By default the listener uses port 1521 to listen for connection requests. The database knows nothing about that. It is also very easy, and not that uncommon, to configure the listener to use another port instead of or in addition to 1521, so it is also a mistake to treat port 1521 as if it were some immutable value.

How do i find what ports are being used.

I need to know how to tell what ports are being used and by what. I recently bought Apple Remote Desktop and have been pretty impressed but I have one computer here that won't let me Observe or Control. I think it is because the G4 in question has a program using port 5900. I need to confirm this is there any way that I can see if this port is being used?
Thanks
Moderith

Hi Moderith--
Welcome to the Apple Discussions.
Look in your Utilities folder for the Network Utility program. Open it, and choose "Port Scan" from the row of tabs in its window. If you're not running Network Utility on the problematic G4, use the G4's IP address. But if you're actually on the G4, use "localhost".
Note that if you check the open ports on the G4 from another computer, you won't see as many as if you check it from the G4 itself. That's because some ports are only local. For example, I have enabled the mail server on my Macs, but only to deliver mail, not relay it. So if I do a port scan using "localhost", I see port 25 open, but it's not open from another computer.
charlie

RFC: What Ports are used

We are trying to establishing a connection from ECC6.0 to a cFolders System. The Systems are in different LANs but are able to reach each other. For security reasons we have to open ports that are used by RFC. Can anyone tell me what ports are used by RFC?
Thanks!

hi
you need to use FILE Port.
Regards,
Hakim

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

What ports are blocked with Homefusion

I am trying to figure out what ports are blocked on the homefusion service.

There is no official list of blocked ports for HomeFusion or any of the other VZW products. All products are treated the same way. The NAT firewall on VZWs new LTE network is responsible for blocking internet communication as well as hiding public IP Addresses. No manual configuration of the devices themselves will allow you to work around the issue. In truth it would be easier to create a list of the allowed ports but we don't have one of those either.
A rule of thumb is that you should assume any custom or unusual ports are blocked. Even the less popular mainstream ports are blocked some times. Only the major mainstream public ports are normally available. You have to test out your applications to know for sure if they work. If you have a laptop then stop by a VZW store and use one of their devices to test if it works before you buy.
Also, anything depending on Public IP Addresses is broken on the new LTE network. Some common examples are VOIP phones, Xbox hosting, IP security cameras, etc. If you need remote access to your local network then forget about it.
The work around to blocked ports and Public IPs are as follows:
1. Setup a VPN to connect to a network where the ports are open
2. Purchase a static IP Address from VZW for $500.00
3. Use a different ISP
VZW does not make exceptions for port blocking. You have to work around them or get by without them.

What Ports Are Blocked using my Wireless Card

Can someone tell what ports are beeing Blocked by Verizonwireless when using my Wireless Card? Also, how do I get one open for example port 4444?

i don't think that the url blocking should block any ports ... however , if its doing this .. you may need to upgrade / reflash the router's firmware .. after the upgrade , reset and reconfigure the router ..

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

What steps are required to configure the Payroll Tax ( USA)?

Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.K

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

What roles are required to use Guided Procedures?

Hi ,
What roles are required to use Guided Procedures?
Thanks
Srinivas.K

Hi,
Refer this block https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
Thanks,
satheshkumar.R

What modifications are required to make a servlet support SSL data encrypti

Hi,
What modifications are required to make a servlet support SSL data encryption?
--kumar

Hi,
What modifications are required to make a servlet
support SSL data encryption?
--kumar No modifications are required in servlet. You have to setup servlet container.

What locks are required on a table when Oracle is processing an UPDATE

What locks are required on a table when Oracle is processing an
UPDATE statement?

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
What locks are required on a table when Oracle is processing an
UPDATE statement?
>
Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
>
Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
>
The above describes the locks when you, the user, tells Oracle to lock the row.

What ports are required to be open on a firewall for UCCX ver7 Backups

Similar Messages

Maybe you are looking for