What ports do I open for Media Manager?

I'm having trouble getting my Media Manager files seen by my DVRs (QIP-7232s). I have enabled such services that allow me to remotely admin my DVRs from the web, so I know they can be seen on the network. But I cannot get them to see the MM server running on my network.
I have a second router between my ActionTec and my XP Pro (32 b) server running Media Manager and holding all my video files. This is the routher that serves the IP addresses for my network.
Installing Media Manager seemed to go well. No errors.
However, none of my DVRs can locate the Media Manager and the contained files. I suspect I need to open a port or two on the 2nd router to allow the Verizon MoCA router access to the MM application.
Does any one know what ports I need to open?

Wow, this makes me want to pull my hair out..
It shouldn't be this difficult
I think I'm going to remove my router and just go with the ActionTec.
When I have more time (and patience) I'll go back into the world of port fowarding.
Thanks!

Similar Messages

What ports do I open for a WRTU54G-TM off my WRT54G running DD-WRT?

I've grown weary of having a flakey internet connection with my WRTU54G resulting in having to power cycle it often. I am going to install my WRT54G running DD-WRT as my primary router and hang the WRTU54G-TM off of it. I'm hoping if all the WRTU54G is doing is the VOIP, then everything will be much more stable.
Can someone tell me what I need to do on DD-WRT to allow the WRTU54G to work? How about the QoS settings for VOIP?
TIA,
Dave

Try to open ports 5060-5061, 16384-16482 on your dd-wrt if the wrtu54g-tm is behind it to allow the voip traffic to passthrough. You can give priority to the port where the wrtu54g-tm is connected to for qos.

What ports should be open for mac-pc chat?

So we've finally got our cams to work with cross-platforming (thanks to sandra and ralph). Now I still have a little bit of problems. I cannot hear him, tho he can hear me, and for some reason, sending/receiving files seem to be hard with most of my buddies. Can someone out there who can do all of these things tell me that optimal ports that they have open? That would be wonderful!

Whenever there is no audio at your end, but the PC user on the other end has a mic and can hear you, the PC user should try "tuning" the preferences for his camera and / or Mic. That may resolve the problem.
To find the setting, he must click on the Preferences menu option that becomes available after he clicks on the Setup icon near the bottom of the AIM 5.9 Buddy List Window.
Once he sees the Preferences, he needs to drop down the list, and click on "Live Video." In the new window that opens, click the button that says "Tuning Video and Audio." Follow the instructions in the wizard that opens.
Some PC users report that they need to reboot their PC after tuning to make the changes effective. Some also have reported that they must re-"Tune" whenever they make ANY camera or mic change, even as simple as unplugging and later plugging the same item back into their PC.
Can someone out there who can do all of these things tell me that optimal ports that they have open?
Your PC pal should see the AIM® Video IM - Frequently Asked Questions for info on setup and router configuration at his end.

Problem opening Roxio Media Manager

I cannot open Roxio Media Manager. It seems to open and then it stops and I get the message MediaManager9 Module has stopped. Windows (Vista) is looking for a solution. I then have to close the program. Has anyone seen this problem before? What is the fix?
Please help.
Solved!
Go to Solution.

I do not use Roxio Media Manager to transfer files from computer to BlackBerry and vice versa.
You can setup your BlackBerry and computer to interact without use of Roxio Media Manager.
Check this link:
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...

What is the problem with Roxio Media Manager??

I purchased my first Blackberry 8310 Curve on Black Friday. For some reason the Blackberry Desktop Manager installs and works absolutely fine. However when I open the media manager from Roxio the screen freezes and it doesn't even show my device. I have uninstalled cleanly and re-installed over a dozen times and can't get it to work. We also went and bought an updated graphics and sound card and have installed them. The Roxio media manager STILL freezes up and we have to shut it down.
I do a lot of Paintshop Pro and have those programs as well as other graphics software. I'm wondering if it is a software conflict? I don't see one. Or if the Roxio is a POS as someone posted before.
I have spent hours and hours reading everything I can online about it and can not find an answer anywhere. The main reason that I want the Media Manager is that I want to make my own ringtones....that's it! The rest I can do without it. Does the BB media manager have the capability to make ringtones?
Any help would be greatly appreciated. Thanks in advance!
Michelle
The computer I'm using is a server converted to workstation.
Intel Pentium 4; 3.20GHZ
1.50 GB RAM
400 GB Hard Drive
Windows XP Home Svc Pack 3
Windows Media Player 11
Audio Card: Sound Blaster Audigy
Graphics Card: NVIDIA GeForce 8400 GS
Solved!
Go to Solution.

on Windows, you can use any software to cut your mp3 for the part you want.
you can use mp3cutter or Audacity.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

What ports does icloud use for mail?

What ports does icloud use for mail?

Read > http://support.apple.com/kb/HT4864 iCloud uses 993 for IMAP and 587 for SMTP

NetBook Screen Resolution for Media Manager

I have an LG x120 Netbook. As a net book, the screen is small, so the max screen resolution is something like 1024 x 566. This si below the minimum screen resolution required for even opening up the Media Manager.
Needless to say, THIS SUCKS, how do I get round this stupid requirement?
Jonathan O'Halloran
www.quantumdx.com

Hi and Welcome to the Forums!
Sorry, but basically, you don't...as you stated, the software has a minimum screen resolution requirement. Simple as that. If your system does not meet that, then the software won't work. You can read this KB for more information, including a workaround.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

What Ports Does Mail Open, and Why?

Mavens of Mac Mail Internals,
While trying to debug my lightly-loaded-yet-consumed-by-spinning-beach-balls 27" iMac running OS X 10.8.4...I've observed in Activity Monitor that Mail has 33 threads and 496 ports in use.
Huh?
Why would Mail possibly need so many ports open? What ports? What kind of ports?
Are all the ports Mail is using the same type of port as 25, 587, or 993...or, is Activity Monitor reporting the system's consumption of another type of port? Or...what?
And...what's typical? How many threads and ports should Mac Mail have running and open at any point in time?
Baseline: My Mail setup is provisioned for 8 GMail mailboxes, 1 Hotmail mailbox, 1 Google Apps (Mail) mailbox, and 1 company mailbox.
Objective: Trying to determine what relationship Mail has, if any, on the increasing number of spinning beach balls infecting my system.
Thanks in advance for your assistance! Much, much appreciated,
Plane Wryter

Ahh!
So...Is Activity Montior reporting on the number of open IPC (Inter-process Communication) ports?
Is that what's going on?
Would this explain why coreaudiod has 1,077 ports open?
If so, any idea as to why? Why does either Mail or Coreaudio need so many internal ports open?
BIG THANKS for the insight and clarification.
Best,
Plane Wryter

Urgent please help: what is the table name for cash management reports?

I am wondering what the table name for cash management reports is. I am trying to figure out then if I have any missing.
Please help.

I checked MSEG table. But, I didn't find any field for date.
Can you tell me field name.
Regards
Siva

What BP Role is used for Loans Management in ECC6?

Hi guys,
Can someone help with the BP role to use for Loans Management in ECC6? The system shows that the old role TR0100 is now obsolete, so in ECC6, what is the role name for FS-CML? Is it FS0000 or something else?
Any documentation on Loans Management in ECC6 will help.
Regards
Fisayo.

Hi,
You have to use BP Role TR0100 only. Please check which BP Role Category is assigned to BP Rle TR0100 in spro. There is no change in ECC6 as well. The role name should be "Main Loan Partner"
Regards
Prasad AV

X64 bit support for Media Manager

Does anyone know when 64 bit support will be written for the Media Manager. I am currently using a work around by setting my phone as an external drive and Windows Media Manager to sync my music, but I would like to use a more intergrated piece of software so that I don't have to do so many different things to customize my Droid X.
Windows 7 Ultimate Edition x64.

Hello! This is Noah with Verizon Wireless. Hope you are having a great day!
I apologize but currently there is no information on the release of an update for the V Cast Media Manager software.

What port number is used for SMTP outgoing mail with AOL?

I inadvertently changed the port number for SMTP outgoing mail of AOL. What port number should I use?

Yahoo and Gmail support should be able to help you.
Not related to Firefox support, web mail doesn't use POP or SMTP protocols which is what email clients such as Thunderbird use for communicating with email servers.

Ports to be open for iTunes U

Hi,
I have an issue in my institution. I can't browse my iTunes U content, especially videos. Videos never start and also block iTunes 30 seconds later.
Do you know which ports need to be open ? My institution is behing a very narrow firewall, we also use a proxy (which is well configurated I guess).
I've been told that 80 and 443 ports should be open (http and https) but it doesn't help, videos are not launching.
Are there other ports to be open ?
Thanks for your help.

Hello psavoyaud
Check out the article below to go over other ports that are used by Apple and its services.
Well known TCP and UDP ports used by Apple software products
http://support.apple.com/kb/TS1629
Regards,
-Norm G.

What is the standard IDOC for substation management??

hi friends..
could you please tell me standard idoc for substation management ?
and also tell me standard BAPI for substation management??
please help me..
thanks and regards
regards
ram

Hi michal..
thank you very much for your quick response.
i got source xml file like this
<?xml version="1.0" encoding="utf-8" ?>
- <MonthlyEnergies xmlns="http://aaaaa.org/MonthlyEnergy.xsd">
<Values Power_Produced="22" Reduction_Power_Consumed="1203.92" Ancillary_Power_Consumed="1056.08" UOM="KWH" Date="2006-09-30T00:00:00" />
</MonthlyEnergies>
i am trying to convert this into SAP .
for this i need IDOC .
Power_Produced = RK40C_KBXXN-STAGR (RK40C_KBXXN is structure)
Reduction_Power_Consumed = RK40C_KBXXN-STAGR
Ancillary_Power_Consumed = RK40C_KBXXN-STAGR
UOM=RK40C_KBXXN-MEINB
date = BUDAT
guide me..
thanks and regards
ram

WAAS FLOW MONITOR and NETQoS integration ( what ports do I open)

Hi there,
I am having issues integrating WAAS flow monitor feature with NetQoS in version 4.2.1.
The WAAS applicance fails to establish the initial session on port 778 with NetQoS which I believe it is needed to set the next session on port 9996 or 9995.
We have opened a "hole" for the WAE to register but still no go.
Any help will be appreciated..
Regards,
Manuel

The port used to communicate between the flow monitor and the NetQoS Aggregator and Management Console is TCP port 7878. You should be able to use the show commands on 4.2 to show the connection status. If the firewall is blocking that port, you'll want to punch a hole and it will continue to try to connect.

What ports do I open for Media Manager?

Similar Messages

Maybe you are looking for