What ports does ACS 3.0 use

We run ACS 3.0 on a windows 2000 sp. 4 server. A nmap scan shows a lot of open ports, e.g. 7/tcp, 9/tcp, 13/tcp, 1050/tcp, and also some udp ports.
Does anyone know what ports the Acs use ?
Regards
Johann Folkestad
Volda Univesity College

ACS ports for administration
HTTP administrative access (login)TCP 2002, ACS distributed logging TCP 2003, Administrative access (after login) port range 1024-65535 (its possible configure)
Than RADIUS and TACACS+ ports
Radius UDP 1812 and 1813 (or according old RFC UDP 1645 and 1646)
TACACS+ TCP 49
M.
Hope that helps, rate if does

Similar Messages

  • HT4199 WHAT PORTS DOES APPLE TV USE?

    WHAT PORTS DOES the APPLE TV USE?

    Google "Apple TV ports" and you get
    <http://support.apple.com/kb/HT2463?viewlocale=en_US&locale=en_US>

  • What ports does icloud use for mail?

    What ports does icloud use for mail?

    Read > http://support.apple.com/kb/HT4864 iCloud uses 993 for IMAP and 587 for SMTP

  • What port number for Desktop Sharing using in Lync Server 2013 and Lync Online

    Dear All,
          My environment using Lync Server 2013 and Lync online on Office 365. I don't want my user using Desktop Sharing feature. then I need to know what port number for Desktop Sharing using in Lync Server 2013 and Lync Online.
    I will deny this port on personal firewall each client.
          Thank you for your advise.

    Hi,
    I'm not sure you'd be able to do this with ports without impacting other application sharing features such as Q&A, Whiteboard, Poll etc - I'm pretty sure they all come under the same umbrella of ClientAppSharing.
    Ordinarily you would create or modify your conferencing policy to restrict sharing to single programs only using a cmdlet similar to below;
    Set-CsConferencingPolicy -Identity "Global" -EnableAppDesktopSharing SingleApplication
    This would disable desktop sharing but enable users to continue sharing other single programs. If you want to remove that functionality too, then replace the 'SingleApplication' parameter with 'None'. Then users won't be able to share any programs either.
    This is the correct way to do it as the icons will be greyed out for the users. Doing it your way, they would still be able to click them, and it would throw an error - this will lead to a lot more support calls and people assuming a service is broken.
    I hope that helps some.
    Kind regards
    Ben

  • What port does WRT1900Ac listen on for remote admin

    good morning,
    I have had a few problems with linksys smart wifi (periodically cannot connect).
    traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
    what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport) 
    also, is this configurable?
    thanks
    Dan

    danielgwalter wrote:
    good morning,
    I have had a few problems with linksys smart wifi (periodically cannot connect).
    traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
    what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport) 
    also, is this configurable?
    thanks
    Dan
    You have to use a Smart Wifi account for remote administration on the WRT1900AC
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • What ports does iTunes update podcasts over?

    Hiho
    Lately I never succed in updating podcasts while using my 3G data ISP. I suspect they block ports. What ports does iTunes require to download new podcasts?
    /peter

    Hi Jan,
    I am sure the Apple Doc is right.
    The Doc was originally written for iChat 2 when you could only chat 1-1
    Obviously with an eye on the future, and of the potential for the data traffic to get busy in some locations, allows for the extra ports allocation.
    If you are in a 4 way Video chat then that would be 16 ports.
    Now in iChat 2 Audio chats used to make use of the same four ports. But as 10 way Audio chats are possible it seems likely this has been changed in multichats to use all twenty ports.
    ( I am also sure that 16384-16403 is 20 ports )
    10:01 AM Saturday; September 1, 2007
    Message was edited by: Ralph Johns (UK)

  • How can I find out what port number my DB is using

    How would one find out what port number a database is using? Is there a SQL command that will allow us to do this?
    Thanks,
    oracle_newbie

    newbie
    Oracle databse assigns a dynamic port number for each established session. Usually, the common port is 1521 which is defined in you tnsnames.ora, however, this is used for requesting a dynamic port. Dynamic ports are within a ragne of 1000+. That's why it is hard to tell which port you are using at a certain time. You should have a network monitoring tool to check this accurately.
    Regards
    null

  • Which ports does Webi Rich CLient use to connect to Universe etc..

    Hello together,
    we have the problem that we cannot run Rich Client from computers outside our network - so which ports does webi Rich Client use to connect to BO Serverl?.
    It will always say universe not found. Login to rich client and everything else is possible.
    It's not an authorisations problem, inside the network people can run the programs fine.
    Thank you

    Hi,
    i assume you have enable CMS port on the firewall, apart from this you need to enable IFRS and Connection Server port also.
    Regards,
    Ramu.
    Edited by: Gowda Timma Ramu on Oct 14, 2010 4:06 PM

  • What port does podcast capture use????

    I cannot find any docs on this. I can use Podcast Capture/Podcast Producer when I am IN the network, but not when I am away from the office.
    What ports can I open up on the firewall to make this work from anywhere???

    Click here for information.
    (32067)

  • What Ports Does Mail Open, and Why?

    Mavens of Mac Mail Internals,
    While trying to debug my lightly-loaded-yet-consumed-by-spinning-beach-balls 27" iMac running OS X 10.8.4...I've observed in Activity Monitor that Mail has 33 threads and 496 ports in use.
    Huh?
    Why would Mail possibly need so many ports open? What ports? What kind of ports?
    Are all the ports Mail is using the same type of port as 25, 587, or 993...or, is Activity Monitor reporting the system's consumption of another type of port? Or...what?
    And...what's typical? How many threads and ports should Mac Mail have running and open at any point in time?
    Baseline: My Mail setup is provisioned for 8 GMail mailboxes, 1 Hotmail mailbox, 1 Google Apps (Mail) mailbox, and 1 company mailbox.
    Objective: Trying to determine what relationship Mail has, if any, on the increasing number of spinning beach balls infecting my system.
    Thanks in advance for your assistance! Much, much appreciated,
    Plane Wryter

    Ahh!
    So...Is Activity Montior reporting on the number of open IPC (Inter-process Communication) ports?
    Is that what's going on?
    Would this explain why coreaudiod has 1,077 ports open?
    If so, any idea as to why? Why does either Mail or Coreaudio need so many internal ports open?
    BIG THANKS for the insight and clarification.
    Best,
    Plane Wryter

  • Video capture with Sat Pro M70: What ports and leads can I use?

    I want to edit my home movies on my Sat Pro M70 using WXP Pro (win dvd or movie maker). I want to capture the video from my panasonic camcorder which has digital tapes. what ports can I use and what leads do I need? I am desperate to edit my recent wedding video to put onto DVD and post to my mum. The panasonic website has been ignoring me! Any advice anyone ??

    Well, as far as I know this unit has only an S-video out port. In this case you can connect the notebook to the TV and watch the picture from notebook on TV but its not possible to receive any signals from TV or any other device on notebook.
    To receive the signals you need a composite port or an s-video in port.
    However, if the camcorder has a firewire port so you can send the digital files thru the firewire connection. But this should only works with digital files which are saved on the camcorder.
    Please also check these useful sites:
    http://www.camcorderinfo.com/content/connecting_cam_to_computer.htm
    http://www.educ.ttu.edu/howto/Vid_Room250_Connections/vid_connections.html

  • What ports do LWAPP AP's use to talk to the controllers.

    Upon boot what ports and protocols are used for the
    LWAPP AP to find the Controller.
    What we are trying to do is, If we have an AP on a
    vendor site in which we have a Site to Site VPN connection.
    Can we get the AP connected and have a device on the vendors site connect to our network?
    Thanks for the Help.
    Pete

    If you are running version 5.1 or earlier the packets are encapsulated in LWAPP so the ports are UDP 12222 or 12223.
    If you are running version 5.2 or later the protocol changed to CAPWAP which uses UDP ports. 5246 and 5247.
    For mobility the controllers use UDP 16666 to talk to eachother and IP Protocol 97 to tunnel the client's traffic if tunneling is needed.

  • What ports does a Officejet Pro 8500 require to be opened?

    I have an Officet Pro 8500, but my CA Anti Virus (provided by Road Runner) is blocking Network printing from my DeskTop.  Can you tell me what ports that the  Officet Pro 8500 uses?  Also are there are any documented instructions for this?

    This document may give some answers possibly:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00035717&cc=us&dlc=en&lc=en
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • What formats does PS Elements 12 use?

    What formats does PS Elements 12 accept?

    Here si the list of file formats for PSE11 and above:
    http://helpx.adobe.com/photoshop-elements/kb/supported-file-formats-photoshop-elements.htm l#Photoshop Elements 11 and later

  • What ports does OBIEE use, ect 9703.9704, ect

    Where can I find the information on all of the port that Oracle OBIEE uses in one document.

    Hi,
    Did you review the OBIEE documentation?
    Oracle Business Intelligence Documentation
    http://www.oracle.com/technology/documentation/bi_doc.html
    Please see if these links/docs help.
    Note: 759312.1 - How to change the ports by default of oracle bi and oc4j (9703, 9704 and 9705) ?
    Note: 550441.1 - How to change default port 9704 of OC4J
    Note: 446852.1 - How To Assign Unique Ports When Installing Multiple Oracle Business Intelligence (BI) Discoverer 10g (10.1.2) Instances On A Single Host
    Changing OBIEE default port
    http://asanga-pradeep.blogspot.com/2009/07/changing-obiee-default-port.html
    Regards,
    Hussein

Maybe you are looking for