What ports does Xserve usesfor Global range?
I am setting the modem to for ward to global ports range but not sure what the range is.:(
AFAIK, strictly, "modems" don't forward ports. "Modems" and "bridges" are comparatively transparent devices; from the perspective of a network protocol, such electronic devices are largely indistinguishable from the equivalent wiring, for instance. "Modem" devices that provide a combination of modem, firewall and IP router can forward ports. And forwarding all ports through a firewall is usually a bad idea.
Modem: MOdulator-DEModulator. They're at the lowest levels of the classic Seven-Layer Network Model, and below routing and firewalls and such. But I digress.
The typical case is forwarding a select few ports, such as port 80 for http web traffic.
Each port opened through the firewall should be justified, as each port forwarded will be attacked.
Some "modem" devices (those which have firewall and IP routing capabilities) can have something they call "global ports", and that's seemingly how the particular vendor, um, allows the end-user the joy of researching and identifying the protocol-specific ports for the task at hand.
With this scheme, the end-user gets to go look up the ports for the particular service, and fill those in for whatever you're looking to forward.
For forwarding http using port 80, that would be the "global port range" of 80 to 80, for instance.
[Start reading here|http://portforward.com/routers.htm] for your specific "modem" device.
I'm taking a very wild guess here around what you're doing and what you're looking at. If I've guessed wrong, some background, some more words around the goal, and some specific device identifications would be helpful in addressing your question.
Similar Messages
-
What port does WRT1900Ac listen on for remote admin
good morning,
I have had a few problems with linksys smart wifi (periodically cannot connect).
traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport)
also, is this configurable?
thanks
Dandanielgwalter wrote:
good morning,
I have had a few problems with linksys smart wifi (periodically cannot connect).
traditionally I run dynDNS so I can connect to devices remotely (using port forwarding) and this works fine for me.
what port does the linksys router itself listen on for remote router admin requests (i.e http://publicipaddress:whatport)
also, is this configurable?
thanks
Dan
You have to use a Smart Wifi account for remote administration on the WRT1900AC
Please remember to Kudo those that help you.
Linksys
Communities Technical Support -
What ports does icloud use for mail?
What ports does icloud use for mail?
Read > http://support.apple.com/kb/HT4864 iCloud uses 993 for IMAP and 587 for SMTP
-
What ports does iTunes update podcasts over?
Hiho
Lately I never succed in updating podcasts while using my 3G data ISP. I suspect they block ports. What ports does iTunes require to download new podcasts?
/peterHi Jan,
I am sure the Apple Doc is right.
The Doc was originally written for iChat 2 when you could only chat 1-1
Obviously with an eye on the future, and of the potential for the data traffic to get busy in some locations, allows for the extra ports allocation.
If you are in a 4 way Video chat then that would be 16 ports.
Now in iChat 2 Audio chats used to make use of the same four ports. But as 10 way Audio chats are possible it seems likely this has been changed in multichats to use all twenty ports.
( I am also sure that 16384-16403 is 20 ports )
10:01 AM Saturday; September 1, 2007
Message was edited by: Ralph Johns (UK) -
HT4199 WHAT PORTS DOES APPLE TV USE?
WHAT PORTS DOES the APPLE TV USE?
Google "Apple TV ports" and you get
<http://support.apple.com/kb/HT2463?viewlocale=en_US&locale=en_US> -
What ports does ACS 3.0 use
We run ACS 3.0 on a windows 2000 sp. 4 server. A nmap scan shows a lot of open ports, e.g. 7/tcp, 9/tcp, 13/tcp, 1050/tcp, and also some udp ports.
Does anyone know what ports the Acs use ?
Regards
Johann Folkestad
Volda Univesity CollegeACS ports for administration
HTTP administrative access (login)TCP 2002, ACS distributed logging TCP 2003, Administrative access (after login) port range 1024-65535 (its possible configure)
Than RADIUS and TACACS+ ports
Radius UDP 1812 and 1813 (or according old RFC UDP 1645 and 1646)
TACACS+ TCP 49
M.
Hope that helps, rate if does -
What Ports Does Mail Open, and Why?
Mavens of Mac Mail Internals,
While trying to debug my lightly-loaded-yet-consumed-by-spinning-beach-balls 27" iMac running OS X 10.8.4...I've observed in Activity Monitor that Mail has 33 threads and 496 ports in use.
Huh?
Why would Mail possibly need so many ports open? What ports? What kind of ports?
Are all the ports Mail is using the same type of port as 25, 587, or 993...or, is Activity Monitor reporting the system's consumption of another type of port? Or...what?
And...what's typical? How many threads and ports should Mac Mail have running and open at any point in time?
Baseline: My Mail setup is provisioned for 8 GMail mailboxes, 1 Hotmail mailbox, 1 Google Apps (Mail) mailbox, and 1 company mailbox.
Objective: Trying to determine what relationship Mail has, if any, on the increasing number of spinning beach balls infecting my system.
Thanks in advance for your assistance! Much, much appreciated,
Plane WryterAhh!
So...Is Activity Montior reporting on the number of open IPC (Inter-process Communication) ports?
Is that what's going on?
Would this explain why coreaudiod has 1,077 ports open?
If so, any idea as to why? Why does either Mail or Coreaudio need so many internal ports open?
BIG THANKS for the insight and clarification.
Best,
Plane Wryter -
What port does podcast capture use????
I cannot find any docs on this. I can use Podcast Capture/Podcast Producer when I am IN the network, but not when I am away from the office.
What ports can I open up on the firewall to make this work from anywhere???Click here for information.
(32067) -
What ports does a Officejet Pro 8500 require to be opened?
I have an Officet Pro 8500, but my CA Anti Virus (provided by Road Runner) is blocking Network printing from my DeskTop. Can you tell me what ports that the Officet Pro 8500 uses? Also are there are any documented instructions for this?
This document may give some answers possibly:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00035717&cc=us&dlc=en&lc=en
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
So, what exactly does "Advertise disks globally using Bonjour" mean?
Just got my APEBS-N on Saturday night at the local store and saw the option under Disks/File Sharning for "Advertise disks globally using Bonjour". Does anyone know what this means or what exactly the results will be? Does un-checking it mean that the disk won't be available over the LAN to the machines running the Airport Disk Utility? The same option appears under printers as well.
MacBook 2.0 Duo Mac OS X (10.4.8)OK, well I guess I will have to call...Anyhow, here is the official verbiage from the Apple docs. Notice how it says contact your ISP or Network Administrator for login info? Why would your ISP give you this type of info?
Setting up your base station to use Bonjour
Bonjour, sometimes referred to as zero-configuration networking, is a networking technology that allows devices to automatically discover each other without any configuration, or network setup.
Some versions of the AirPort Extreme Base Station support using Bonjour to advertise services across the Internet. This requires a Dynamic DNS hostname and password you may have received from your Internet service provider (ISP) or network administrator.
Once you have your account information, open AirPort Utility, select your base station in the list, and then enter the base station password if necessary. Click Advanced in the toolbar, and then click Bonjour. Enter the information you received from your ISP or network administrator in the fields provided.
Check with your ISP or network administrator if you need more information about support for Bonjour.
MacBook Pro C2D 15" & iMac CD 17" Mac OS X (10.4.8) 2 Gigs of RAM each
MacBook Pro C2D 15" & iMac CD 17" Mac OS X (10.4.8) 2 Gigs of RAM each -
What ports does OBIEE use, ect 9703.9704, ect
Where can I find the information on all of the port that Oracle OBIEE uses in one document.
Hi,
Did you review the OBIEE documentation?
Oracle Business Intelligence Documentation
http://www.oracle.com/technology/documentation/bi_doc.html
Please see if these links/docs help.
Note: 759312.1 - How to change the ports by default of oracle bi and oc4j (9703, 9704 and 9705) ?
Note: 550441.1 - How to change default port 9704 of OC4J
Note: 446852.1 - How To Assign Unique Ports When Installing Multiple Oracle Business Intelligence (BI) Discoverer 10g (10.1.2) Instances On A Single Host
Changing OBIEE default port
http://asanga-pradeep.blogspot.com/2009/07/changing-obiee-default-port.html
Regards,
Hussein -
What ports does it have?
On the 15 inch 2.16ghz. The gallery only shows one side.
You'll find specifications for all Mac models here:
http://support.apple.com/specs/
The MBP's specs are here:
http://support.apple.com/specs/macbookpro/MacBook_Pro.html
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
What ports to open between Connection broker and Web access hosts
I have setup a 4 node 2008 R2 RDS farm (1 connection broker, 1 Web access, and 2 session hosts.) They were all built from the same image, but the web access and connection broker will not talk to each other. They are all on the same subnet, and ips are x.x.x.200-203 The Web access server can ping the Sesions hosts, the session hosts can ping each other, web access and the connection broker. But the Web access and Connection broker cant ping each other. I turned off the windows firewall and they can ping, and connect... So whats ports does it need open?
Thanks!
~MHello,
Do you need any further helps? Please let us know it. Thanks.
· Lionel Chen
TechNet Subscriber Support in forum
If you have any feedback on our support, please [email protected]
This posting is provided "AS IS" with no warranties, and confers no rights. -
What exactly does the global switch command line do ?
Hello All
Just foraging in the dark world of APP-V. I have a question which I cannot find answer for through google.
There are powershell commands to publish an APP-V application globally. What exactly does the global switch do ?
I understand it makes the application available to everyone on the machine for anyone who logs onto that machine.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
ThanksCorrect, the global switch makes the application accessable for all users logging on to that system.
This feature is required for some packages, like Office. But it is ofter used for applications used by everyone, like Adobe Reader.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
A package can be added to the system but until it is published a user cannot start it. They won't see any shortcuts in their startmenu/desktop/etc.
So after you added the package to the system, it must be published to a user or globally (every user) to start it. -
Hi,
I'm attempting to install oracle 10.2.0 on Solaris 10.
When I create a database i get the error:
Failed to allocate port(s) in the specified range(s) for the following process(es): .....
So I look at the logs and there looks like to be some configuration issues but i'm not sure where to start.
I've changed the port from NULL to 1521 in listener.ora.
It worried me that it was set to null.
Ive tried running emca -config -all db ( not sure what central agent home should be set it as /app/oracle/product/10.2.0/Db_1 seemed to accept that)
This gives me the same above error.
Any help is greatly appreciated. Please note im both a novice solaris and oracle user
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log.
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: DBSNMP
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 691205234
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYSMAN
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emd.prop
erties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties has been copied to /app/oracle/product/10.2.0/Db_1/s
ysman/config/emd.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.
properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties has been copied to /app/oracle/product/10.2.0/Db_1
/sysman/config/emoms.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml to /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml.emca.
tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml has been copied to /app/oracle/product/10.2.0/Db_1/sysman/
emd/targets.xml.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 agentHome: null isCentral: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /app/oracle/product/10.2.0/Db_1/oui
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [app/oracle/product/10.2.0/Db_1]
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /app/oracle/product/10.2.0/Db_1
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /app/oracle/product/10.2.0/Db_1/install/staticports.ini
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Contro
l [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log for more details.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [55
40-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2266)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
Also got thie error in another log
Cluster Error Message: PRKH-1010 : Unable to communicate with CRS Servicesthanks mathias,
but i have already done, netstat -na |grep portnumber
but nothing no port in range are set
thanks howevar
regards
Maybe you are looking for
-
I can no longer print from Firefox
I was in Yahoo mail. I was getting ready to print. The print dialog was open already. Then I got some kind of notice from Firefox that it needed to restart to install an update. No problem I thought, the updates have always had no problem. Since I al
-
AMD/ATi with xf86-video-ati is glitching (random frame hang)
I've asked #archlinux about this multiple times to no avail. Also, I can't find anything on the Wiki about an issue like this. Basically my computer hangs for around a 8th-4th second or so about every 20-40 seconds. The hang is visual only (i think),
-
Hi All! I want to write a Stored Procedure(Oracle) I have a table 'rejrea' as follows: Name NULL? Type TCT_IK NOT NULL NUMBER(8) TRJ_TRAN_SEQ_NB NOT NULL NUMBER(8) LTRR_REJ_RSN_NB NOT NULL NUMBER(4) I have table 'REJTAB' NAME NULL? TYPE TCT_IK NOT NU
-
Mail redirect rule only works with "every message"?
I have been trying to redirect selected mail from a pop account to another email address. it only seems to work if I select the Every Message condition. If I try to use a condition like "From Contains Newberg" in the rule, the mail is not redirected.
-
Sending Adobe form in perzonalized mail forms
Hi I created a personalized mail form and I want to send the Adobe PDF form of the contract to the customer along with the personalized mail forms. I know how to send a personalized mail form, but not sure how do we attach the generate the PDF and a