What ports need to be opened for Podcasting?

To all,
I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
Any help is greatly appreciated. Thank you in advance.
zanm
Other OS windows NT server

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

Similar Messages

What ports need to be open for device enrollment?

I'm able to install the trust profile on an iPhone, but when I attempt to "Enroll" my device and I click "Install" it begins the process,
Installing Profile, Generating Key, Enrolling Certificate and gets stuck and reports a network issue.
I'm also hoping we can get our hands on some proper lion documentation. The resource page is pretty bleak right now.

Yea they should have that info on the kbase. I have been reading up on this as well, as my clients never worked and finding out you need ports open.
I believe this is correct, if not someone correct me:
Ports for Profile Manager - 2195, 2196, 5223, 1640, 80, 443 Apple Server block to open too: 17.0.0.0/8
TCP Port 2195 and 2196 should be "oubound" from Profile Manager Server to 17.0.0.0/8.
TCP Port 5223 "outbound" from LAN for clients to 17.0.0.0/8
TCP Port 443 and 1640 "inbound" to Profile Manager server. I would think port 80 as well, but any login I would put a cert on and use only 443. Not sure if 80 is really needed.

What ports need to be opened from apple's firewall?

I googled that qmaster uses port 10012 tcp&udp, but what ports need to be open for Qadministrator and Batch Monitor?
They didn't seem to work just with 10012.
Is there any documents about this from apple?
Idea of just leaving firewall off sounds like Microsoft in te 90s'.
And even they have made an interactive firewall that asks you to open a port when some application tries to use it.
Well, these fcp applications are sooo PRO...

On the Qmaster system prefs pane, turn on the "Show Qmaster status in menu bar" option in the advanced tab.
Then click the Qmaster icon on the menu bar, and it will show you all active Qmaster services, and their TCP port. You would need that port open. You need to do this on every computer on the cluster.
In your setup, are all the computers on the same subnet? Although you may be on a large network, you can rope off your systems into their own sub network, with a master firewall and avoid this type of problem. Each computer will have a different port, and that port will change every single time you start and stop the service. The TCP port will fall between 40000 and 65536 (the highest port ranges).
So, again I recommend protecting the network which will protect all the systems universally. But try setting the TCP ports listed on all the service nodes, and remember that those will change whenever you start and stop the service. (I'm not sure if the port will change after a reboot as well.)
Good luck

What is the Firewall ports need to be open for TED distribution working properly

Hi ,
May I know what ports need to be open at the firewall in order the TED
distribution to be working properly.
I suspect it is firewall problem because the inventoried server which
is install at the same segment with the TED distributor server, I manage to
push the policy and collect inventory data , but for those inventoried
server which is install at the remote site, I fail to push the TED into the
server. At the TED distributor server, the log say that computer refused
connection. And there is a firewall in between the TED distributor server
and the remote inventoried server.
Thank you.
Steven Foong

TED is using 1229
Ron
<[email protected]> wrote in message
news:X7lAe.2193$[email protected]..
> Hi ,
>
> May I know what ports need to be open at the firewall in order the
TED
> distribution to be working properly.
>
> I suspect it is firewall problem because the inventoried server which
> is install at the same segment with the TED distributor server, I manage
to
> push the policy and collect inventory data , but for those inventoried
> server which is install at the remote site, I fail to push the TED into
the
> server. At the TED distributor server, the log say that computer refused
> connection. And there is a firewall in between the TED distributor server
> and the remote inventoried server.
>
> Thank you.
>
>
> Steven Foong

What TCP/UDP ports need to be open for VPN Client version 4.8?

What TCP/UDP ports need to be open for Cisco VPN Client version 4.8 to work?
Thanks,

Normally, you need the following ports and protocol :
UDP 500
UDP 4500
ESP
In case, you are using IPSec over TCP you have to open, TCP port 10000 or any other port you want to use for IPSec connections (Its configurable).
-Kanishka

What ports need to be open?

I'm setting up my fmis to deliver video through rtmp and http.
I'm on a locked down network.
What ports need to be open to allow people outside of the network to access the rtmp/http streams?
I am correct to say only port 80 and 1935?

Yes... 80 and 1935 is what you need for RTMP connections and proxied HTTP downloads. If you want to use RTMPS, you should also open 443.
If you want to be able to use the admin service and admin console, you'll also want to open 1111

Which ports need to be open for messages and facetime to work properly?

I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
I'm behind my work firewall, which ports need to be open for messages to work properly?

Just make sure your 9001 port is open.
Hope this works..
Hamid

Thin JDBC through firewall - what ports need to be open?

We are running Oracle 7.3, and Oracle Web Server on the same
computer. The firewall is set up to allow connections to that
computer from anywhere, on ports 80 and 1521.
Our thin JDBC applet works perfectly from inside the firewall,
but from outside, I get a time-out error trying to open the JDBC
connection.
What else needs to be done get JDBC through? Do other ports need
to be open on the firewall?
The JDBC FAQ mentions a "Net8 compliant" or "SQLNet certified"
firewall - is that relevant to this problem, and if so, what does
it really mean?
We are supposed to be operational right now, so many many thanks
for any help on this!
- Joe Wielgosz
null

Try in the Lion Server Forum?
Regards,
Colin R.

What Ports need to be opened during Exchange migration?

Hi Team,
I am working on a Migration project (Ex2007 to Ex2013). Same forest same domain but are in different sites.
Please find the below details
AD Site1 - Ex2007 Servers
2 Mailbox Servers (CCR)
2 (HUB+CAS) in NLB
2 Domain Controllers
AD Site2 - Ex2013 Servers
2 Multi Role Servers (MB+CAS) with DAG
2 Domain Controllers
We have firewall in between data centers, could some one help me out what ports are need to opened on firewalls.
Thanks,
Balgates
Regards, Balgates

808 (TCP)
Mailbox Replication Service uses to communicate
53 (TCP)
DNS
135 (TCP)
RPC End Point
389 (TCP)
LDAP
3268
LDAP
1024 > (TCP)
if mailbox store is not statically configured then 1024 higher ports need to be open
88 (TCP)
Kerberos
445 (TCP)
Microsoft-DS Service
443 (TCP)
Mailbox Replication Proxy service uses port 443 to communicate with other Exchange 2010 client access server via HTTPS.

What ports need to be open in a version fios Actiontec MI424WR router to share Mac files os 10.7os

I need to share Mac Lion files over the internet through a Verizon FIOS Actiontec MI424WR router. I don't know which ports need to be open.

548 is AFP assuming you are sharing with another Mac

What ports need to be open on Fw for Waas Communication--Urgent

Hi All,
This product is new to need your help in configuring this. I am explaining the architecture below:-
We have a requirement to use WAVE-594-K9 Software Release 5.3.1 and in our Manila location and it will not talk to Waas central Manager in our client location instead client has installed one same model Wave-594 in PHX.
So now client has said it will only be used for caching contents and not for optimizing, they have some video training on web which will be passed through this wave and for making them highly/fastly available to agents they want to use this.
We have installed one Wave in Manila in application-accelerator mode and using PBR to redirect the desired traffic via Wave. As per our client Manila Wave will talk to PHX wave and PHX wave will get registered to Waas Manager in client network.
We have firewall between PHX wave & Manila wave, please let me know do we need to opened tcp/udp ports on FW for opening the communication between these two waves?
and what else i need to configure on Manila wave?
This is very urgent quick reply will be highly appreciated!!
Thanks!!
Bhisham

Thanks for the quick reply Kanwal!!
I checked with my team in PHX and we have Juniper FW in between these two Wave's, so what i understand from the links which you have shared.
In Manila Wave i need to configure that in Directed Mode and udp port 4050 needs to be opened bi-directionally on Juniper FW between IPs configured on wave devices.
In Manila we have 10.111.x.189 (Virtual-Blade IP) & 10.111.x.190 IPs & in PHX we 63.149.23.x & 63.149.23.x (VB) so from both IPs we required to open udp 4050 bi-directionally? Want to be sure before raising any request :-)
In PHX wave i am not sure whether we can configure that in directed mode and if it’s not then also it will work by opening port 4050 on FW Right?
In last our client was saying that Manila Wave will only be used as cache engine (VB is configured as content-engine) and it will download contents from PHX Wave (which is registered to CM at client side), what does it mean and do i need to do any special config on wave to achieve this?
I am very new to this device and lot of research on net confused me a lot, please don’t mind!!
Will wait for your reply then only i will raise request with FWteam.
Thanks,
Bhisham

Pixma MX922 drops off network, what ports need to be opened

Pixma MX922 keeps dropping from my wireless network - no matter what I do to configure. Called Canon support and they were not able to resolve issue (offered to replace printer, prefer not to do this - only as last resort).
I attempted ALL the standard items to resolve (re-install printer, drivers, make static IP (NO DHCP leasing - and my DHCP lease time on router is set to max. time of 2 weeks anyway...), made sure of no firewall issues, etc., etc.) but printer keeps doing this. Can ping the ip, etc., so I know that it exists, but UNLESS I POWER the printer OFF / ON - anything I sent to it will just sit in print queue. Once I power it off / on - all printing is fine - only for a few hours or next day - until it happens again...
Somewhere on this forum another user stated that he resolved the problem by contacting Canon support and they told him specific Ports on his router that had to be opened in order to fix the issue of the printer dropping off wireless network (* he must have had a better tech than the ones I spoke with...).
Does anyone on this forum know the ports that must be open on the router? Possibly one or two higher number ip ports such as 1020, or 25466, etc. ?
Thank you to anyone who may know this and provide.

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

What ports need to be open in order to sign in with my Adobe ID?

I keep getting an error when attempting to log in to activate Photoshop CS6 Beta. The error says, "Please connect to the internet and retry". I suspect my corporate firewall is to blame, but I need to know what ports I need opened in order to make my request.

All Experiencing this issue. Please try these steps.
Let's see what we can see here:
1. Try going into a web browser and connecting to both of these addresses:
https://www.adobe.com/
https://www.acrobat.com/
Let us know if you can get to those ok! Testing firewall functionality with Adobe.com addresses.
After that, please let us know the results of clicking these links in succession
2. Try going into a web browser and connecting first to
https://ims-na1.adobelogin.com/
and secondly to:
https://ims-na1.adobelogin.com/status
Let us know what you see, or if you get errors.
It would be nice to have all responses show up here:
http://forums.adobe.com/message/4285499#4285499
Thanks!
Pete

ZLM Agent behind firewall: What ports needs to be opened?

What ports ZLM Agent (managed device) is using when communizating the ZLM Server? And what ports ZLM Server is using when communicating to ZLM Agent? We do not have server GUI up, so Remote Management ports are not needed...
Thanx in advance...
-John-

John,
Scroll down in the list till you get the TCP Ports,
that has the information you are looking for:
Novell Documentation
Rainer

HT4814 What ports need to get opened to do this remotely?

I looked through the list of ports commonly used here: http://support.apple.com/kb/TS1629 and forwarded what appeared to be the appropriate ports but this appears to only cover through Lion. I wouldn't have thought much would've chaged in that dept but who knows.
10.8.1 Server FYI

Sorry, I should have specified. I'm using the server app. You can use it to manage other servers but it just times out. I've got the following ports forwarded:
22          SSH (will probably change at some point)
50          IKE?
331        Server admin
500        VPN&IKE?
660        Server admin
687        Yet more admin...
1701      L2TP
3283      ARD
5900      ARD/VNC
5988      ARD (kind of older I think)
Theres some others for sickbeard/sabnzbd etc, but those are the ones I've opened for the server.

What ports need to be opened for Podcasting?

Similar Messages

Maybe you are looking for